!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering. Chip Coils Murata Manufacturing Co., Ltd. Cat.No.O05E-13 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please O05E13.pdf 05.3.4 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. CONTENTS 1 Part Numbering 2 Products Guide 4 Selection Guide 5 2 3 High Frequency 4 1 Monolithic Type LQG15H/LQG18H Series 2 Film Type LQP03T/LQP15T/LQP15M/LQP18M Series 13 3 Wound Type LQW15A/LQW18A Series 23 4 Wound Type LQW2BH/LQW31H Series 33 5 Wound Type LQH31H Series 37 6 7 6 5 for General Use 6 Monolithic Type LQM18N/LQM21N Series 38 7 Wound Type LQH31M/LQH32M/LQH43M (N) Series 41 8 for DC-DC Converter 8 Wound Type LQH2MC Series 47 9 for Choke 9 Monolithic Type LQM21D/LQM21F/LQM31F Series 48 10 Wound Type LQH31C/LQH32C/LQH43C Series 52 11 Magnetic Shielded Type LQH3KS Series 57 12 Wound/Magnetic Shielded Type LQH55D/LQH66S Series 59 !Caution/Notice 62 Packaging 69 Design Kits 71 Information 83 The Bluetooth trademarks are owned by Bluetooth SIG, Inc., U. S. A. Recycled Paper 10 11 12 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. o Part Numbering Chip Coils (SMD) (Part Number) LQ H q w e 32 M N 2 331 K r t y 3 L u i o !0 yInductance qProduct ID Product ID LQ Chip Coils wStructure Code Structure G Monolithic Type (Air-core Coil) H Wound Type (Ferrite Core) M Monolithic Type (Ferrite Core) P Film Type W Wound Type (Air-core Coil) Expressed by three figures. The unit is micro-henry (H). The first and second figures are significant digits, and the third figure expresses the number of zeros which follow the two figures. If there is a decimal point, it is expressed by the capital letter "R". In this case, all figures are significant digits. If inductance is less than 0.1H, the inductance code is expressed by a combination of two figures and the capital letter "N", and the unit of inductance is nano-henry (nH). The capital letter "N" indicates the unit of "nH", and also expresses a decimal point. In this case, all figures are significant digits. uInductance Tolerance eDimensions (LgW) Code Inductance Tolerance B 0.1nH Code Dimensions (LgW) EIA C 0.2nH 03 0.6g0.3mm 0201 D 0.5nH 15 1.0g0.5mm 0402 G 2% 18 1.6g0.8mm 0603 H 3% 21 2.0g1.25mm 0805 J 5% 2B 2.0g1.5mm 0805 K 10% 2M 2.0g1.6mm 0806 M 20% 31 3.2g1.6mm 1206 N 30% 32 3.2g2.5mm 1210 S 0.3nH 3K 3.3g3.3mm 1212 W 0.05nH 43 4.5g3.2mm 1812 55 5.7g5.0mm 2220 66 6.3g6.3mm 2525 iFeatures Code 0 rApplications and Characteristics Code Series Applications and Characteristics H LQG Monolithic Air-core N D F M T A H LQP LQW 1 Standard Type LQM21N LQH32C for Choke (Low-current DC Power Supplies) 2 Standard Type LQH32C/LQH32M/LQH3KS 3 Low DC Resistance LQH32C for Choke (DC Power Supplies) 5 Low Profile Type LQH32C/LQH3KS 7 Large Current Type LQM21F Film Type Film Type (Low DC Resistance Type) High Q Type (UHF-SHF) *1 : Except LQM21N Series *2 : Except LQH32/LQH3K Series High Q Type (VHF-UHF) for Resonant Circuit M for Resonant Circuit (Coating Type) oElectrode *Lead (Pb) Free for Choke Code for Choke (Coating Type) 0 S for Choke (Magnetically Shielded Type) 2 H for High-frequency Resonant Circuit 3 C LQH Standard Type LQG/LQP/LQW/LQM*1/LQH*2 Low DC Resistance N D Series High-Q/ LQW15A/LQW18A/LQW2BH Low DC Resistance for Resonant Circuit LQM Features Electrode Sn Series LQG18H/LQP03T/LQWppA/LQM LQG15H/LQP15T/LQPppM/LQH2MC LF Solder LQWppH/LQH (Except LQH2MC) tCategory Code N S Category Standard Type Continued on the following page. 2 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please O05E13.pdf 05.3.4 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. (Part Number) LQ H q w e 32 M N r t 331 K y 2 3 L u i o !0 !0Packaging Code Packaging K Plastic Taping (o330mm Reel) LQH*1 /LQWppH/LQM31F/LQM21*2 Series LQH/LQWppH/LQM31F/LQM21*2 L Plastic Taping (o180mm Reel) B Bulk J Paper Taping (o330mm Reel) LQW18A/LQG/LQM18N/LQM21*3 /LQP*4 D Paper Taping (o180mm Reel) LQWppA/LQG/LQM18N/LQM21*3 /LQP All Series *1 Except LQH43C/LQH66S *2 LQM21D(22 - 47H)/LQM21F(4.7 - 47H)/LQM21N(2.7 - 4.7H) only. *3 LQM21D(1.0 - 10H)/LQM21F(1.0 - 2.2H)/LQM21N(0.1 - 2.2H) only. *4 Except LQP15T 3 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Please read read rating rating and and !CAUTION !CAUTION (for (for storage, storage, operating, operating, rating, rating, soldering, soldering, mounting mounting and and handling) handling) in in this this PDF catalog to prevent smoking and/or burning, etc. etc. !Note * Please you are requested approvespecifications. our product specifications or to transact for product before ordering. * This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe ourapproval productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Products Guide Murata's LQp series of chip coils consists of compact, high-performance inductors. Their innovative coil and case structures mean low DC resistance and outstanding high-frequency characteristics. The series is designed for a variety of applications, facilitating component selection for individual circuit requirements. Dimensions Application Part Number Structure (mm) EIA Code 0.5 0402 0.8 0603 0.3 0201 0.5 0402 Multilayer LQP03T 0.6 LQP15T 1.0 Tight Inductance Tolerance LQW2BH LQH31H Magnetically shielded multilayer LQM21N General Frequency Range 0402 0.8 0603 2.2nH 470nH 1.5 0805 2.7nH 470nH 2.0 1206 3.2 1206 1.6 0.8 0603 1.25 0805 2.0 1206 1.6 Wound (ferrite core) 3.2 2.5 4.5 LQH43M(N) DC-DC Converter Type LQH2MC 3.2 Wound LQM21F Magnetically shielded multilayer LQH32C 54nH 880nH 47nH 2200nH 0.1H 4.7H 100H 0.15H 1210 1.0H 1812 1.0H 560H 2200H 4.7H 1.0H 47H 1.25 0805 1.0H 47H 1.6 1206 1206 3.2 1210 2.5 4.5 10H 100H 0.12H 560H 0.15H 1.0H 1812 3.2 Wound LQH3KS Magnetically shielded 5.0 2220 0.12H 3.3 3.3H 1212 3.3 6.3 LQH66S Magnetically shielded 6.3 2525 CAUTION : Use rosin-based flux, but not strong acidic flux (with chlorine content exceeding 0.2wt%) when soldering chip coil. Do not use water-soluble flux. 4 0.27H 470H 10000H 5.7 LQH55D 82H 0805 2.0 LQH43C 100nH 1.25 1.6 Wound 8.8nH 0806 3.2 LQH31C 120nH 1.6 3.2 LQM31F Chokes 2.0 2.0 LQM21D 100nH 1.3nH 3.2 LQH31M LQH32M 0.5 33nH 1.3nH 1.6 LQM18N 18nH 0603 1.6 Wound (ferrite core) 27nH 0.8 3.2 LQW31H 10m 100nH 0402 1.6 Wound (air core) 1m 270nH 0.5 1.0 LQW18A 100 1.0nH 1.6 LQW15A 10 1.0nH 1.0 LQP18M 1 100n 0.6nH Film LQP15M 10n 1.2nH 1.6 LQG18H 1n 1.0nH 1.0 LQG15H High Frequency Range Inductance Range (H) 2200H 10000H O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Selection Guide Start Operating Frequency Greater than 100MHz Less than 100MHz Application Choke General High Frequency Wire Wound Multilayer Wire Wound Multilayer Wire Wound Film Multilayer 1212 0805 1206 0603 0402 0201 0402 LQH3KS_23/_53 LQM21D LQH31M LQM18N LQW15A LQP03T LQG15H 3.3-2200H 20-320mA 1.0-47H 7-60mA 0.15-100H 47-2200nH 1.3-120nH 0.6-27nH 1.0-270nH 1206 0805 1210 0805 0603 0402 0603 LQH31C LQM21F LQH32M LQM21N LQW18A LQP15T LQG18H 0.12-100H 80-970mA 1.0-47H 7-220mA 1.0-560H 0.1-4.7H 2.2-470nH 1.0-18nH 1.2-100nH 1210 1206 1812 0805 0402 LQH32C LQM31F LQH43M(N) LQW2BH LQP15M (Standard type) 10H 70mA 1.0-2200H 2.7-470nH 1.0-33nH 1206 0603 0.15-560H 60-1450mA Dimensions in inches 1210 DC-DC Converter LQH32C_53 LQW31H LQP18M 8.8-100nH 1.3-100nH (Low profile type) 1.0-100H 100-1000mA Wire Wound 1812 0806 1206 LQH31H 54-880nH LQH43C LQH2MC 1.0-470H 90-1080mA 4.7-82H 2220 LQH55D 0.12-10000H 0.05-6.0A 2525 LQH66S 0.27-10000H 0.05-6.0A 5 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Chip Coils 1 High Frequency Monolithic Type LQG15H/LQG18H Series LQG15HN Series 0.250.1 Polarity Marking 0.50.05 The LQG15HN series are chip inductors specifically designed for high frequency applications. The LQG15H series is designed to realize stable characteristics in high frequency range applying integrated multilayer process. The integrated multilayer process enables a wide range of inductance values with tight tolerance. 1.00.05 0.50.05 Features 1. High-Q, stable inductance in high frequency is achieved by the original structure that minimizes stray capacitance. It is suitable for the high frequency circuits of mobile communication equipment. 2. The small size of LQG15H (1.0x0.5x0.5mm) is suitable for small and low profile mobile equipment. 3. The external electrodes with nickel barrier structure provide excellent solder heat resistance. 4. Wide variation in inductance value 1-10nH (E24 step) 10-120nH (E12 step) (in mm) Applications 1. High frequency circuits of mobile phones such as PA, ANT, VCO, SAW, etc. 2. Mobile phones such as GSM, CDMA, PDC, etc. 3. "Bluetooth" 4. W-LAN 5. High frequency circuits in general Inductance (nH) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Q (min.) LQG15HN1N0S02 1.0 0.3nH 100 300 0.10 max. 8 100 6000 0402 LQG15HN1N1S02 1.1 0.3nH 100 300 0.10 max. 8 100 6000 0402 LQG15HN1N2S02 1.2 0.3nH 100 300 0.10 max. 8 100 6000 0402 LQG15HN1N3S02 1.3 0.3nH 100 300 0.10 max. 8 100 6000 0402 LQG15HN1N5S02 1.5 0.3nH 100 300 0.10 max. 8 100 6000 0402 LQG15HN1N6S02 1.6 0.3nH 100 300 0.10 max. 8 100 6000 0402 LQG15HN1N8S02 1.8 0.3nH 100 300 0.10 max. 8 100 6000 0402 LQG15HN2N0S02 2.0 0.3nH 100 300 0.12 max. 8 100 6000 0402 LQG15HN2N2S02 2.2 0.3nH 100 300 0.15 max. 8 100 6000 0402 LQG15HN2N4S02 2.4 0.3nH 100 300 0.16 max. 8 100 6000 0402 LQG15HN2N7S02 2.7 0.3nH 100 300 0.17 max. 8 100 6000 0402 LQG15HN3N0S02 3.0 0.3nH 100 300 0.18 max. 8 100 6000 0402 LQG15HN3N3S02 3.3 0.3nH 100 300 0.19 max. 8 100 6000 0402 LQG15HN3N6S02 3.6 0.3nH 100 300 0.19 max. 8 100 6000 0402 LQG15HN3N9S02 3.9 0.3nH 100 300 0.19 max. 8 100 6000 0402 LQG15HN4N3S02 4.3 0.3nH 100 300 0.21 max. 8 100 6000 0402 LQG15HN4N7S02 4.7 0.3nH 100 300 0.23 max. 8 100 6000 0402 LQG15HN5N1S02 5.1 0.3nH 100 300 0.24 max. 8 100 6000 0402 Part Number Test Frequency Self Resonance Frequency (min.) (MHz) (MHz) EIA Continued on the following page. 6 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Inductance (nH) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Q (min.) LQG15HN5N6S02 5.6 0.3nH 100 300 0.26 max. 8 100 5300 0402 LQG15HN6N2S02 6.2 0.3nH 100 300 0.27 max. 8 100 4300 0402 LQG15HN6N8J02 6.8 5% 100 300 0.29 max. 8 100 4200 0402 LQG15HN7N5J02 7.5 5% 100 300 0.31 max. 8 100 3900 0402 LQG15HN8N2J02 8.2 5% 100 300 0.33 max. 8 100 3600 0402 LQG15HN9N1J02 9.1 5% 100 300 0.34 max. 8 100 3400 0402 LQG15HN10NJ02 10 5% 100 300 0.35 max. 8 100 3200 0402 LQG15HN12NJ02 12 5% 100 300 0.41 max. 8 100 2800 0402 LQG15HN15NJ02 15 5% 100 300 0.46 max. 8 100 2300 0402 LQG15HN18NJ02 18 5% 100 300 0.51 max. 8 100 2100 0402 LQG15HN22NJ02 22 5% 100 300 0.58 max. 8 100 1800 0402 LQG15HN27NJ02 27 5% 100 300 0.67 max. 8 100 1600 0402 LQG15HN33NJ02 33 5% 100 200 0.67 max. 8 100 1500 0402 LQG15HN39NJ02 39 5% 100 200 1.06 max. 8 100 1200 0402 LQG15HN47NJ02 47 5% 100 200 1.15 max. 8 100 1000 0402 LQG15HN56NJ02 56 5% 100 200 1.20 max. 8 100 800 0402 LQG15HN68NJ02 68 5% 100 180 1.25 max. 8 100 800 0402 LQG15HN82NJ02 82 5% 100 150 1.60 max. 8 100 600 0402 LQG15HNR10J02 100 5% 100 150 1.60 max. 8 100 600 0402 LQG15HNR12J02 120 5% 100 150 1.60 max. 8 100 600 0402 Part Number Test Frequency Self Resonance Frequency (min.) (MHz) (MHz) 1 EIA Operating Temp. Range: -55C to +125C Only for reflow soldering. Q-Frequency Characteristics Inductance-Frequency Characteristics 1000 100 120nH 1.5nH 80 68nH Inductance (nH) 33nH 60 Q 4.7nH 40 12nH 100 4.7nH 10 12nH 20 68nH 1.5nH 33nH 120nH 0 100 1000 Frequency (MHz) 10000 1 100 1000 10000 Frequency (MHz) 7 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. 1 LQG15HS Series 0.250.1 Polarity Marking 0.50.05 The LQG15HS series are chip inductors specifically designed for high frequency applications. The LQG15H series is designed to realize stable characteristics in high frequency range applying integrated multilayer process. The integrated multilayer process enables a wide range of inductance values with tight tolerance. Since recent mobile phones install color LCDs and camera modules, the power consumption becomes higher. In order to reduce power consumption a low DC resistance is strongly required. The LQG15HS has achieved the lowest DC resistance. 1.00.05 0.50.05 (in mm) Features 1. High-Q, stable inductance in high frequency is achieved by the original structure that minimizes stray capacitance. It is suitable for the high frequency circuits of mobile communication equipment. 2. The small size of LQG15H (1.0x0.5x0.5mm) is suitable for small and low profile mobile equipment. 3. The external electrodes with nickel barrier structure provide excellent solder heat resistance. 4. Wide variation in inductance value 1-10nH (E24 step) 10-270nH (E12 step) Applications 1. High frequency circuits of mobile phones such as PA, ANT, VCO, SAW, etc. 2. Mobile phones such as GSM, CDMA, PDC, etc. 3. "Bluetooth" 4. W-LAN 5. High frequency circuits in general Supplements The product with tight inductance tolerance. Please contact our local sales or product engineers. Inductance (nH) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Q (min.) LQG15HS1N0S02 1.0 0.3nH 100 300 0.07 max. 8 100 10000 0402 LQG15HS1N1S02 1.1 0.3nH 100 300 0.09 max. 8 100 6000 0402 LQG15HS1N2S02 1.2 0.3nH 100 300 0.09 max. 8 100 6000 0402 LQG15HS1N3S02 1.3 0.3nH 100 300 0.09 max. 8 100 6000 0402 LQG15HS1N5S02 1.5 0.3nH 100 300 0.1 max. 8 100 6000 0402 LQG15HS1N6S02 1.6 0.3nH 100 300 0.1 max. 8 100 6000 0402 LQG15HS1N8S02 1.8 0.3nH 100 300 0.1 max. 8 100 6000 0402 LQG15HS2N0S02 2.0 0.3nH 100 300 0.1 max. 8 100 6000 0402 LQG15HS2N2S02 2.2 0.3nH 100 300 0.12 max. 8 100 6000 0402 LQG15HS2N4S02 2.4 0.3nH 100 300 0.15 max. 8 100 6000 0402 LQG15HS2N7S02 2.7 0.3nH 100 300 0.15 max. 8 100 6000 0402 LQG15HS3N0S02 3.0 0.3nH 100 300 0.17 max. 8 100 6000 0402 LQG15HS3N3S02 3.3 0.3nH 100 300 0.17 max. 8 100 6000 0402 LQG15HS3N6S02 3.6 0.3nH 100 300 0.18 max. 8 100 6000 0402 LQG15HS3N9S02 3.9 0.3nH 100 300 0.18 max. 8 100 6000 0402 Part Number Test Frequency Self Resonance Frequency (min.) (MHz) (MHz) EIA Continued on the following page. 8 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Inductance (nH) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Q (min.) LQG15HS4N3S02 4.3 0.3nH 100 300 0.18 max. 8 100 6000 0402 LQG15HS4N7S02 4.7 0.3nH 100 300 0.18 max. 8 100 6000 0402 LQG15HS5N1S02 5.1 0.3nH 100 300 0.2 max. 8 100 5300 0402 LQG15HS5N6S02 5.6 0.3nH 100 300 0.2 max. 8 100 4500 0402 LQG15HS6N2S02 6.2 0.3nH 100 300 0.22 max. 8 100 4500 0402 LQG15HS6N8J02 6.8 5% 100 300 0.24 max. 8 100 4500 0402 LQG15HS7N5J02 7.5 5% 100 300 0.24 max. 8 100 4200 0402 LQG15HS8N2J02 8.2 5% 100 300 0.24 max. 8 100 3700 0402 LQG15HS9N1J02 9.1 5% 100 300 0.26 max. 8 100 3400 0402 LQG15HS10NJ02 10 5% 100 300 0.26 max. 8 100 3400 0402 LQG15HS12NJ02 12 5% 100 300 0.28 max. 8 100 3000 0402 LQG15HS15NJ02 15 5% 100 300 0.32 max. 8 100 2500 0402 LQG15HS18NJ02 18 5% 100 300 0.36 max. 8 100 2200 0402 LQG15HS22NJ02 22 5% 100 300 0.42 max. 8 100 1900 0402 LQG15HS27NJ02 27 5% 100 300 0.46 max. 8 100 1700 0402 LQG15HS33NJ02 33 5% 100 200 0.58 max. 8 100 1600 0402 LQG15HS39NJ02 39 5% 100 200 0.65 max. 8 100 1200 0402 LQG15HS47NJ02 47 5% 100 200 0.72 max. 8 100 1000 0402 LQG15HS56NJ02 56 5% 100 200 0.82 max. 8 100 800 0402 LQG15HS68NJ02 68 5% 100 180 0.92 max. 8 100 800 0402 LQG15HS82NJ02 82 5% 100 150 1.2 max. 8 100 700 0402 LQG15HSR10J02 100 5% 100 150 1.25 max. 8 100 600 0402 LQG15HSR12J02 120 5% 100 150 1.3 max. 8 100 600 0402 LQG15HSR15J02 150 5% 100 140 2.99 max. 8 100 550 0402 LQG15HSR18J02 180 5% 100 130 3.38 max. 8 100 500 0402 LQG15HSR22J02 220 5% 100 120 3.77 max. 8 100 450 0402 LQG15HSR27J02 270 5% 100 110 4.94 max. 8 100 400 0402 Part Number Test Frequency Self Resonance Frequency (min.) (MHz) (MHz) 1 EIA Operating Temp. Range: -55C to +125C Only for reflow soldering. Q-Frequency Characteristics Inductance-Frequency Characteristics E4991A 1000 270nH 80 120nH 1.0nH 56nH 100 Inductance (nH) Q 60 3.3nH 40 22nH 10nH 10 3.3nH 10nH 20 1.0nH 1 120nH 56nH 22nH 270nH 0 100 1000 Frequency (MHz) 10000 1 100 1000 Frequency (MHz) 10000 Continued on the following page. 9 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. 1 Reference Data E4991&16197A Q (typ.) Inductance (nH) 100MHz 800MHz 900MHz 1.8GHz 2.0GHz 2.4GHz LQG15HS1N0S02 1.0 32 34 51 54 57 11700 LQG15HS1N1S02 1.1 35 37 59 62 64 10000 LQG15HS1N2S02 1.2 34 36 56 58 60 LQG15HS1N3S02 1.3 34 36 56 57 58 7000 LQG15HS1N5S02 1.5 31 34 50 53 55 9700 LQG15HS1N6S02 1.6 31 33 50 52 54 LQG15HS1N8S02 1.8 31 33 48 49 50 LQG15HS2N0S02 2.0 31 32 47 48 49 LQG15HS2N2S02 2.2 32 34 48 49 50 0.05 6200 LQG15HS2N4S02 2.4 32 34 51 52 52 0.07 10000 LQG15HS2N7S02 2.7 31 33 49 50 50 0.08 LQG15HS3N0S02 3.0 32 34 49 51 50 LQG15HS3N3S02 3.3 31 33 46 47 46 LQG15HS3N6S02 3.6 31 33 45 47 46 LQG15HS3N9S02 3.9 31 33 49 47 46 LQG15HS4N3S02 4.3 31 33 44 45 44 LQG15HS4N7S02 4.7 31 33 42 43 42 LQG15HS5N1S02 5.1 31 33 44 45 42 38 Part Number Rdc ( typ.) 0.03 0.04 SRF (MHz typ.) 8600 8600 7500 6400 0.09 8700 8000 6700 8000 0.1 7500 6500 0.12 0.13 6200 5800 5000 LQG15HS5N6S02 5.6 30 32 41 40 LQG15HS6N2S02 6.2 29 31 41 41 38 LQG15HS6N8J02 6.8 29 30 40 40 37 LQG15HS7N5J02 7.5 28 29 38 37 34 LQG15HS8N2J02 8.2 27 29 35 34 29 LQG15HS9N1J02 9.1 27 29 36 35 31 LQG15HS10NJ02 10 27 29 35 33 28 LQG15HS12NJ02 12 26 27 28 24 18 LQG15HS15NJ02 15 26 27 25 21 13 0.22 2900 LQG15HS18NJ02 18 25 25 22 18 - 0.26 2800 LQG15HS22NJ02 22 23 24 16 - - 0.30 2500 LQG15HS27NJ02 27 21 21 - - - 0.33 2000 LQG15HS33NJ02 33 20 20 - - - 0.40 1900 LQG15HS39NJ02 39 19 18 - - - 0.44 1700 LQG15HS47NJ02 47 17 16 - - - 0.48 1500 LQG15HS56NJ02 56 15 13 - - - 0.55 1300 0.63 1200 1100 0.16 5100 4900 0.17 4500 4100 0.18 3900 3200 68 12 10 - - - LQG15HS82NJ02 82 9 6 - - - 0.77 LQG15HSR10J02 100 - - - - - 0.92 900 LQG15HSR12J02 120 - - - - - 1.00 800 LQG15HS68NJ02 10 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. 1 LQG18H Series The LQG18H series is designed to realize stable characteristics in high frequency range applying integrated multilayer process. 0.30.2 0.80.15 Polarity Marking Features 1. High-Q, stable inductance in high frequency is achieved by the original structure that minimizes stray capacitance. It is suitable for the high frequency circuits of mobile communication equipment. 2. Small size of LQG18H (1.6x0.8x0.8mm) is suitable for small, handy equipment, especially for card size equipment. 3. The external electrodes with nickel barrier structure provide excellent solder heat resistance. 1.60.15 0.80.15 (in mm) Applications 1. High frequency circuits of mobile phones such as PA, ANT, VCO, SAW, etc. 2. Mobile phones such as GSM, CDMA, PDC, etc. 3. "Bluetooth" 4. W-LAN 5. High frequency circuits in general Inductance (nH) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Q (min.) LQG18HN1N2S00 1.2 0.3nH 100 500 0.10 max. 12 100 6000 0603 LQG18HN1N5S00 1.5 0.3nH 100 500 0.10 max. 12 100 6000 0603 LQG18HN1N8S00 1.8 0.3nH 100 500 0.10 max. 12 100 6000 0603 LQG18HN2N2S00 2.2 0.3nH 100 500 0.10 max. 12 100 6000 0603 LQG18HN2N7S00 2.7 0.3nH 100 500 0.15 max. 12 100 6000 0603 LQG18HN3N3S00 3.3 0.3nH 100 500 0.15 max. 12 100 6000 0603 LQG18HN3N9S00 3.9 0.3nH 100 450 0.15 max. 12 100 6000 0603 LQG18HN4N7S00 4.7 0.3nH 100 450 0.20 max. 12 100 6000 0603 LQG18HN5N6S00 5.6 0.3nH 100 430 0.20 max. 12 100 5000 0603 LQG18HN6N8J00 6.8 5% 100 430 0.25 max. 12 100 5000 0603 LQG18HN8N2J00 8.2 5% 100 400 0.25 max. 12 100 4000 0603 LQG18HN10NJ00 10 5% 100 400 0.30 max. 12 100 3500 0603 LQG18HN12NJ00 12 5% 100 400 0.35 max. 12 100 3000 0603 LQG18HN15NJ00 15 5% 100 350 0.40 max. 12 100 2800 0603 LQG18HN18NJ00 18 5% 100 350 0.45 max. 12 100 2600 0603 LQG18HN22NJ00 22 5% 100 300 0.50 max. 12 100 2300 0603 LQG18HN27NJ00 27 5% 100 300 0.55 max. 12 100 2000 0603 LQG18HN33NJ00 33 5% 100 300 0.60 max. 12 100 1700 0603 LQG18HN39NJ00 39 5% 100 300 0.65 max. 12 100 1500 0603 LQG18HN47NJ00 47 5% 100 300 0.70 max. 12 100 1200 0603 LQG18HN56NJ00 56 5% 100 300 0.75 max. 12 100 1100 0603 LQG18HN68NJ00 68 5% 100 300 0.80 max. 12 100 1000 0603 LQG18HN82NJ00 82 5% 100 300 0.85 max. 12 100 900 0603 LQG18HNR10J00 100 5% 100 300 0.90 max. 12 100 800 0603 Part Number Test Frequency Self Resonance Frequency (min.) (MHz) (MHz) EIA Operating Temp. Range: -40C to +85C Only for reflow soldering. 11 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Q-Frequency Characteristics Inductance-Frequency Characteristics 1000 200 68nH 160 Inductance (nH) 3.3nH 120 Q 1 80 10nH 100 10 10nH 40 3.3nH 68nH 0 100 1000 Frequency (MHz) 12 10000 1 100 1000 Frequency (MHz) 10000 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Chip Coils High Frequency Film Type LQP03T/LQP15T/LQP15M/LQP18M Series 2 LQP03T Series Coloring side 0.300.05 LQP03T series using Murata's original thin film technology contributes further to miniaturizing high performance equipment because the size is small and the Q-value is high. *Polarity Marking Inductance : 1.0-3.9nH 4.3-15nH3% 18-27nH Coloring side 0.600.05 Polarity Marking Features 0.300.05 1. Ultra small and thin size 0.6x0.3x0.3mm 2. High Q value in high frequency range 3. E24 step 0.6 to 3.9nH +-0.1nH 4.3 to 10nH +-3% 4. E12 step 0.6 to 3.9nH +-0.2nH 4.7 to 15nH +-5% 18 to 27nH +-3%, +-5% 0.150.05 (in mm) Applications 1. High frequency circuits of mobile phones such as PA, ANT, VCO, SAW, etc. 2. Mobile phones such as GSM, CDMA, PDC, etc. 3. "Bluetooth" 4. W-LAN 5. High frequency circuits in general Part Number Inductance (nH) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Q (min.) Test Frequency Self Resonance Frequency (min.) (MHz) (MHz) LQP03TN0N6B00 0.6 0.1nH 500 420 0.08 max. 11 500 6000 0201 LQP03TN0N6C00 0.6 0.2nH 500 420 0.08 max. 11 500 6000 0201 LQP03TN0N7B00 0.7 0.1nH 500 410 0.09 max. 11 500 6000 0201 LQP03TN0N8B00 0.8 0.1nH 500 410 0.09 max. 11 500 6000 0201 LQP03TN0N8C00 0.8 0.2nH 500 410 0.09 max. 11 500 6000 0201 LQP03TN0N9B00 0.9 0.1nH 500 400 0.10 max. 11 500 6000 0201 LQP03TN1N0B00 1.0 0.1nH 500 400 0.10 max. 11 500 6000 0201 LQP03TN1N0C00 1.0 0.2nH 500 400 0.10 max. 11 500 6000 0201 LQP03TN1N1B00 1.1 0.1nH 500 280 0.13 max. 11 500 6000 0201 LQP03TN1N2B00 1.2 0.1nH 500 280 0.13 max. 11 500 6000 0201 LQP03TN1N2C00 1.2 0.2nH 500 280 0.13 max. 11 500 6000 0201 LQP03TN1N3B00 1.3 0.1nH 500 280 0.16 max. 11 500 6000 0201 LQP03TN1N5B00 1.5 0.1nH 500 280 0.16 max. 11 500 6000 0201 LQP03TN1N5C00 1.5 0.2nH 500 280 0.16 max. 11 500 6000 0201 LQP03TN1N6B00 1.6 0.1nH 500 280 0.16 max. 11 500 6000 0201 LQP03TN1N8B00 1.8 0.1nH 500 280 0.16 max. 11 500 6000 0201 LQP03TN1N8C00 1.8 0.2nH 500 280 0.16 max. 11 500 6000 0201 LQP03TN2N0B00 2.0 0.1nH 500 220 0.18 max. 11 500 6000 0201 LQP03TN2N2B00 2.2 0.1nH 500 220 0.18 max. 11 500 6000 0201 LQP03TN2N2C00 2.2 0.2nH 500 220 0.18 max. 11 500 6000 0201 LQP03TN2N4B00 2.4 0.1nH 500 220 0.21 max. 11 500 6000 0201 LQP03TN2N7B00 2.7 0.1nH 500 220 0.21 max. 11 500 6000 0201 LQP03TN2N7C00 2.7 0.2nH 500 220 0.21 max. 11 500 6000 0201 LQP03TN3N0B00 3.0 0.1nH 500 190 0.30 max. 11 500 6000 0201 EIA Continued on the following page. 13 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Inductance (nH) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Q (min.) LQP03TN3N3B00 3.3 0.1nH 500 190 0.30 max. 11 500 6000 0201 LQP03TN3N3C00 3.3 0.2nH 500 190 0.30 max. 11 500 6000 0201 LQP03TN3N6B00 3.6 0.1nH 500 170 0.45 max. 11 500 6000 0201 LQP03TN3N9B00 3.9 0.1nH 500 170 0.45 max. 11 500 6000 0201 LQP03TN3N9C00 3.9 0.2nH 500 170 0.45 max. 11 500 6000 0201 LQP03TN4N3H00 4.3 3% 500 160 0.55 max. 11 500 6000 0201 LQP03TN4N7H00 4.7 3% 500 160 0.55 max. 11 500 6000 0201 LQP03TN4N7J00 4.7 5% 500 160 0.55 max. 11 500 6000 0201 LQP03TN5N1H00 5.1 3% 500 140 0.68 max. 11 500 6000 0201 LQP03TN5N6H00 5.6 3% 500 140 0.68 max. 11 500 6000 0201 LQP03TN5N6J00 5.6 5% 500 140 0.68 max. 11 500 6000 0201 LQP03TN6N2H00 6.2 3% 500 130 0.75 max. 11 500 6000 0201 LQP03TN6N8H00 6.8 3% 500 130 0.75 max. 11 500 6000 0201 LQP03TN6N8J00 6.8 5% 500 130 0.75 max. 11 500 6000 0201 LQP03TN7N5H00 7.5 3% 500 110 0.86 max. 11 500 5500 0201 LQP03TN8N2H00 8.2 3% 500 110 0.86 max. 11 500 5500 0201 LQP03TN8N2J00 8.2 5% 500 110 0.86 max. 11 500 5500 0201 LQP03TN9N1H00 9.1 3% 500 100 1.10 max. 11 500 4500 0201 LQP03TN10NH00 10 3% 500 100 1.10 max. 11 500 4500 0201 LQP03TN10NJ00 10 5% 500 100 1.10 max. 11 500 4500 0201 LQP03TN12NH00 12 3% 500 90 1.25 max. 11 500 3700 0201 LQP03TN12NJ00 12 5% 500 90 1.25 max. 11 500 3700 0201 LQP03TN15NH00 15 3% 500 90 1.50 max. 11 500 3300 0201 LQP03TN15NJ00 15 5% 500 90 1.50 max. 11 500 3300 0201 LQP03TN18NH00 18 3% 500 80 2.00 max. 11 500 3100 0201 LQP03TN18NJ00 18 5% 500 80 2.00 max. 11 500 3100 0201 LQP03TN22NH00 22 3% 500 70 2.60 max. 11 500 2800 0201 LQP03TN22NJ00 22 5% 500 70 2.60 max. 11 500 2800 0201 LQP03TN27NH00 27 3% 500 70 3.10 max. 11 500 2500 0201 LQP03TN27NJ00 27 5% 500 70 3.10 max. 11 500 2500 0201 Test Frequency Self Resonance Frequency (min.) (MHz) (MHz) EIA Operating Temp. Range: -40C to +85C Only for reflow soldering. Q-Frequency Characteristics Inductance-Frequency Characteristics E4991A 80 E4991A 16197A 16197A 1000 1.5nH 60 Inductance (nH) 2 Part Number 3.9nH Q 40 6.8nH 15nH 10nH 10 10nH 20 27nH 100 6.8nH 3.9nH 15nH 27nH 1.5nH 0 100 1 1000 Frequency (MHz) 10000 100 1000 10000 Frequency (MHz) Continued on the following page. 14 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Reference Data E4991A & 16197A Part Number Inductance (nH) (typ.) Q (Typ.) 800MHz 900MHz 1.8GHz 2.0GHz 2.4GHz 800MHz 900MHz 1.8GHz 2.0GHz 2.4GHz LQP03TN0N6 0.6 0.6 0.6 0.6 0.6 50 min. 54 min. 70 min. 73 min. 77 min. LQP03TN0N7 0.7 0.7 0.7 0.7 0.7 50 min. 54 min. 70 min. 73 min. 77 min. LQP03TN0N8 0.8 0.8 0.8 0.8 0.8 50 min. 54 min. 70 min. 73 min. 77 min. LQP03TN0N9 0.9 0.9 0.9 0.9 0.9 50 min. 54 min. 70 min. 73 min. 77 min. LQP03TN1N0 1.0 1.0 1.0 1.0 1.0 50 min. 54 min. 70 min. 73 min. 77 min. LQP03TN1N1 1.1 1.1 1.1 1.1 1.1 50 min. 54 min. 70 min. 73 min. 77 min. LQP03TN1N2 1.2 1.2 1.2 1.2 1.2 50 54 70 73 77 LQP03TN1N3 1.3 1.3 1.3 1.3 1.3 48 52 67 72 74 LQP03TN1N5 1.5 1.5 1.5 1.5 1.5 45 48 63 66 69 LQP03TN1N6 1.6 1.6 1.6 1.6 1.6 43 47 57 64 67 LQP03TN1N8 1.8 1.8 1.8 1.8 1.8 36 38 50 53 55 LQP03TN2N0 2.0 2.0 2.0 2.0 2.0 38 40 52 54 57 LQP03TN2N2 2.2 2.2 2.2 2.2 2.2 28 35 49 52 54 LQP03TN2N4 2.4 2.4 2.4 2.4 2.4 36 38 50 53 56 LQP03TN2N7 2.7 2.7 2.7 2.7 2.7 28 30 40 42 44 LQP03TN3N0 3.0 3.0 3.0 3.0 3.0 28 29 39 41 43 LQP03TN3N3 3.3 3.3 3.3 3.3 3.4 29 31 42 43 45 LQP03TN3N6 3.6 3.6 3.6 3.7 3.7 31 33 43 45 47 LQP03TN3N9 3.9 3.9 3.9 4.0 4.1 29 31 41 43 45 LQP03TN4N3 4.3 4.3 4.3 4.4 4.5 28 30 40 42 44 LQP03TN4N7 4.7 4.7 4.8 4.9 5.1 28 30 40 42 43 LQP03TN5N1 5.1 5.1 5.2 5.3 5.5 26 28 37 39 40 LQP03TN5N6 5.6 5.6 5.8 5.9 6.1 22 24 32 33 33 LQP03TN6N2 6.2 6.2 6.5 6.6 6.9 20 21 27 28 28 LQP03TN6N8 6.8 6.8 7.1 7.4 7.7 21 22 29 30 30 LQP03TN7N5 7.5 7.5 7.9 8.2 8.7 21 22 28 30 29 LQP03TN8N2 8.2 8.2 8.6 9.1 9.6 18 19 25 25 24 LQP03TN9N1 9.1 9.1 9.9 10 11 20 21 26 26 25 LQP03TN10N 10 10 11 12 13 21 22 28 28 27 LQP03TN12N 12 12 13 14 16 21 22 27 27 25 LQP03TN15N 15 15 18 19 23 21 21 25 24 22 LQP03TN18N 18 18 24 - - 18 19 20 - - LQP03TN22N 22 23 32 - - 16 17 16 - - LQP03TN27N 28 29 47 - - 15 15 13 - - 2 15 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. LQP15T Series Polarity Marking 0.500.05 1.000.05 Features 0.400.05 2 The LQP15T series offers High Q value, tight inductance tolerance with small/thin package using Murata's original film engineering technology. 1. High Q value 2. Tight inductance tolerance (+-0.1nH, +-0.2nH, +-3%) 3. Ultra small and tight size (1005 size, height 0.4mm) 4. Low DC resistance (in mm) 0.250.1 Applications 1. High frequency circuits of mobile phones such as PA, ANT, VCO, SAW, etc. 2. Mobile phones such as GSM, CDMA, PDC, etc. 3. "Bluetooth" 4. W-LAN 5. High frequency circuits in general Part Number Inductance (nH) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Q (min.) LQP15TN1N0B02 1.0 0.1nH 500 300 0.1 max. 17 500 6000 0402 LQP15TN1N0C02 1.0 0.2nH 500 300 0.1 max. 17 500 6000 0402 LQP15TN1N1B02 1.1 0.1nH 500 300 0.1 max. 17 500 6000 0402 LQP15TN1N1C02 1.1 0.2nH 500 300 0.1 max. 17 500 6000 0402 LQP15TN1N2B02 1.2 0.1nH 500 300 0.1 max. 17 500 6000 0402 LQP15TN1N2C02 1.2 0.2nH 500 300 0.1 max. 17 500 6000 0402 LQP15TN1N3B02 1.3 0.1nH 500 300 0.15 max. 17 500 6000 0402 LQP15TN1N3C02 1.3 0.2nH 500 300 0.15 max. 17 500 6000 0402 LQP15TN1N5B02 1.5 0.1nH 500 300 0.15 max. 17 500 6000 0402 LQP15TN1N5C02 1.5 0.2nH 500 300 0.15 max. 17 500 6000 0402 LQP15TN1N6B02 1.6 0.1nH 500 250 0.15 max. 17 500 6000 0402 LQP15TN1N6C02 1.6 0.2nH 500 250 0.15 max. 17 500 6000 0402 LQP15TN1N8B02 1.8 0.1nH 500 250 0.15 max. 17 500 6000 0402 LQP15TN1N8C02 1.8 0.2nH 500 250 0.15 max. 17 500 6000 0402 LQP15TN2N0C02 2.0 0.2nH 500 220 0.2 max. 17 500 6000 0402 LQP15TN2N2C02 2.2 0.2nH 500 220 0.2 max. 17 500 6000 0402 LQP15TN2N4C02 2.4 0.2nH 500 220 0.2 max. 17 500 6000 0402 LQP15TN2N7C02 2.7 0.2nH 500 220 0.2 max. 17 500 6000 0402 LQP15TN3N0C02 3.0 0.2nH 500 190 0.3 max. 17 500 5500 0402 LQP15TN3N3C02 3.3 0.2nH 500 190 0.3 max. 17 500 5500 0402 LQP15TN3N6C02 3.6 0.2nH 500 170 0.4 max. 17 500 5500 0402 LQP15TN3N9C02 3.9 0.2nH 500 170 0.4 max. 17 500 5500 0402 LQP15TN4N7C02 4.7 0.2nH 500 160 0.5 max. 17 500 5000 0402 LQP15TN5N6C02 5.6 0.2nH 500 140 0.6 max. 17 500 4500 0402 LQP15TN6N8H02 6.8 3% 500 130 0.7 max. 17 500 3500 0402 LQP15TN8N2H02 8.2 3% 500 110 0.8 max. 17 500 3000 0402 LQP15TN10NH02 10 3% 500 100 1.0 max. 17 500 2500 0402 LQP15TN12NH02 12 3% 500 90 1.0 max. 17 500 2500 0402 LQP15TN15NH02 15 3% 500 90 1.3 max. 17 500 2000 0402 LQP15TN18NH02 18 3% 500 80 1.5 max. 17 500 1500 0402 Operating Temp. Range: -40C to +85C Only for reflow soldering. 16 Test Frequency Self Resonance Frequency (min.) (MHz) (MHz) EIA O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Q-Frequency Characteristics Inductance-Frequency Characteristics 80 50 40 2.0nH 60 Q Inductance (nH) 3.9nH 8.2nH 40 12nH 18nH 2 18nH 30 20 12nH 10 8.2nH 20 3.9nH 2.0nH 0 0 10 100 1000 Frequency (MHz) 10000 10 100 1000 10000 Frequency (MHz) 17 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. LQP15M Series 1. Tight inductance tolerance (+-0.05nH, +-0.1nH, +-2%) realized by Murata's original film technology. Various inductance values enable assembly with no tuning. 2. Ultra small size 0402 inductor which is low profile and lightest weight in the world enables miniaturizing of mobile telecommunications equipment. LQP15M series weights 0.6mg/pc. while multilayer type inductor weights 0.9mg/pc. 3. High Q at high frequency range. 4. High self resonant frequency due to low stray capacitance and narrow inductance distribution provides stable inductance in high frequency circuits such as telecommunications equipment. 1.00.1 0.350.1 2 0.50.1 Features 0.250.1 (in mm) Applications 1. High frequency circuits of mobile phones such as PA, ANT, VCO, SAW, etc. 2. Mobile phones such as GSM, CDMA, PDC, etc. 3. "Bluetooth" 4. W-LAN 5. High frequency circuits in general Inductance (nH) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Q (min.) LQP15MN1N0B02 1.0 0.1nH 500 400 0.1 max. 13 500 6000 0402 LQP15MN1N0W02 1.0 0.05nH 500 400 0.1 max. 13 500 6000 0402 LQP15MN1N1B02 1.1 0.1nH 500 390 0.1 max. 13 500 6000 0402 LQP15MN1N1W02 1.1 0.05nH 500 390 0.1 max. 13 500 6000 0402 LQP15MN1N2B02 1.2 0.1nH 500 390 0.1 max. 13 500 6000 0402 LQP15MN1N2W02 1.2 0.05nH 500 390 0.1 max. 13 500 6000 0402 LQP15MN1N3B02 1.3 0.1nH 500 280 0.2 max. 13 500 6000 0402 LQP15MN1N3W02 1.3 0.05nH 500 280 0.2 max. 13 500 6000 0402 LQP15MN1N4W02 1.4 0.05nH 500 280 0.2 max. 13 500 6000 0402 LQP15MN1N5B02 1.5 0.1nH 500 280 0.2 max. 13 500 6000 0402 LQP15MN1N5W02 1.5 0.05nH 500 280 0.2 max. 13 500 6000 0402 LQP15MN1N6B02 1.6 0.1nH 500 220 0.3 max. 13 500 6000 0402 LQP15MN1N6W02 1.6 0.05nH 500 220 0.3 max. 13 500 6000 0402 LQP15MN1N7W02 1.7 0.05nH 500 280 0.2 max. 13 500 6000 0402 LQP15MN1N8B02 1.8 0.1nH 500 280 0.2 max. 13 500 6000 0402 LQP15MN1N8W02 1.8 0.05nH 500 280 0.2 max. 13 500 6000 0402 LQP15MN1N9W02 1.9 0.05nH 500 220 0.3 max. 13 500 6000 0402 LQP15MN2N0B02 2.0 0.1nH 500 220 0.3 max. 13 500 6000 0402 LQP15MN2N0W02 2.0 0.05nH 500 220 0.3 max. 13 500 6000 0402 LQP15MN2N1W02 2.1 0.05nH 500 220 0.3 max. 13 500 6000 0402 LQP15MN2N2B02 2.2 0.1nH 500 220 0.3 max. 13 500 6000 0402 LQP15MN2N2W02 2.2 0.05nH 500 220 0.3 max. 13 500 6000 0402 LQP15MN2N3W02 2.3 0.05nH 500 220 0.3 max. 13 500 6000 0402 LQP15MN2N4B02 2.4 0.1nH 500 220 0.3 max. 13 500 6000 0402 LQP15MN2N4W02 2.4 0.05nH 500 220 0.3 max. 13 500 6000 0402 LQP15MN2N5W02 2.5 0.05nH 500 220 0.3 max. 13 500 6000 0402 LQP15MN2N6W02 2.6 0.05nH 500 220 0.3 max. 13 500 6000 0402 LQP15MN2N7B02 2.7 0.1nH 500 220 0.3 max. 13 500 6000 0402 LQP15MN2N7W02 2.7 0.05nH 500 220 0.3 max. 13 500 6000 0402 LQP15MN2N8W02 2.8 0.05nH 500 190 0.4 max. 13 500 6000 0402 Part Number Test Frequency Self Resonance Frequency (min.) (MHz) (MHz) EIA Continued on the following page. 18 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Inductance (nH) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Q (min.) LQP15MN2N9W02 2.9 0.05nH 500 190 0.4 max. 13 500 6000 0402 LQP15MN3N0B02 3.0 0.1nH 500 190 0.4 max. 13 500 6000 0402 LQP15MN3N0W02 3.0 0.05nH 500 190 0.4 max. 13 500 6000 0402 LQP15MN3N1W02 3.1 0.05nH 500 190 0.4 max. 13 500 6000 0402 LQP15MN3N2W02 3.2 0.05nH 500 190 0.4 max. 13 500 6000 0402 LQP15MN3N3B02 3.3 0.1nH 500 190 0.4 max. 13 500 6000 0402 LQP15MN3N3W02 3.3 0.05nH 500 190 0.4 max. 13 500 6000 0402 LQP15MN3N4W02 3.4 0.05nH 500 170 0.5 max. 13 500 6000 0402 LQP15MN3N5W02 3.5 0.05nH 500 170 0.5 max. 13 500 6000 0402 LQP15MN3N6B02 3.6 0.1nH 500 170 0.5 max. 13 500 6000 0402 LQP15MN3N6W02 3.6 0.05nH 500 170 0.5 max. 13 500 6000 0402 LQP15MN3N7W02 3.7 0.05nH 500 170 0.5 max. 13 500 6000 0402 LQP15MN3N8W02 3.8 0.05nH 500 170 0.5 max. 13 500 6000 0402 LQP15MN3N9B02 3.9 0.1nH 500 170 0.5 max. 13 500 6000 0402 LQP15MN3N9W02 3.9 0.05nH 500 170 0.5 max. 13 500 6000 0402 LQP15MN4N3B02 4.3 0.1nH 500 160 0.6 max. 13 500 6000 0402 LQP15MN4N7B02 4.7 0.1nH 500 160 0.6 max. 13 500 6000 0402 LQP15MN5N1B02 5.1 0.1nH 500 140 0.7 max. 13 500 6000 0402 LQP15MN5N6B02 5.6 0.1nH 500 140 0.7 max. 13 500 6000 0402 LQP15MN6N2B02 6.2 0.1nH 500 130 0.9 max. 13 500 6000 0402 LQP15MN6N8B02 6.8 0.1nH 500 130 0.9 max. 13 500 6000 0402 LQP15MN7N5B02 7.5 0.1nH 500 110 1.1 max. 13 500 5500 0402 LQP15MN8N2B02 8.2 0.1nH 500 110 1.1 max. 13 500 5500 0402 LQP15MN9N1B02 9.1 0.1nH 500 100 1.3 max. 13 500 4500 0402 LQP15MN10NG02 10 2% 500 100 1.3 max. 13 500 4500 0402 LQP15MN12NG02 12 2% 500 90 1.6 max. 13 500 3700 0402 LQP15MN15NG02 15 2% 500 90 1.8 max. 13 500 3300 0402 LQP15MN18NG02 18 2% 500 80 2.0 max. 13 500 3100 0402 LQP15MN22NG02 22 2% 500 70 2.6 max. 13 500 2800 0402 LQP15MN27NG02 27 2% 500 70 3.1 max. 13 500 2500 0402 LQP15MN33NG02 33 2% 500 60 3.8 max. 13 500 2100 0402 Part Number Test Frequency Self Resonance Frequency (min.) (MHz) (MHz) EIA Operating Temp. Range: -40C to +85C Only for reflow soldering. Q-Frequency Characteristics Inductance-Frequency Characteristics 100 100 33nH 80 2.2nH Inductance (nH) 15nH 60 Q 4.7nH 40 8.2nH 20 8.2nH 10 4.7nH 2.2nH 15nH 33nH 0 100 1000 Frequency (MHz) 10000 1 1000 10000 Frequency (MHz) Continued on the following page. 19 2 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Reference Data E4991A+16197A Part Number 2 Inductance (nH) (Typ.) Q (Typ.) 800MHz 900MHz 1.8GHz 2.0GHz 2.4GHz 800MHz 900MHz 1.8GHz 2.0GHz 2.4GHz LQP15MN1N0 1.0 1.0 1.0 1.0 1.0 50 55 73 76 85 LQP15MN1N1 1.1 1.1 1.1 1.1 1.1 44 47 70 76 83 LQP15MN1N2 1.2 1.2 1.2 1.2 1.2 43 47 69 76 82 LQP15MN1N3 1.3 1.3 1.3 1.3 1.3 39 43 56 60 65 LQP15MN1N4 1.4 1.4 1.4 1.4 1.4 39 41 51 54 58 LQP15MN1N5 1.5 1.5 1.5 1.5 1.5 38 40 49 51 54 LQP15MN1N6 1.6 1.6 1.6 1.6 1.6 26 28 37 39 42 LQP15MN1N7 1.7 1.7 1.7 1.7 1.7 37 40 48 49 53 LQP15MN1N8 1.8 1.8 1.8 1.8 1.8 35 37 46 49 52 LQP15MN1N9 1.9 1.9 1.9 1.9 1.9 34 36 46 49 52 LQP15MN2N0 2.0 2.0 2.0 2.0 2.0 34 36 47 50 53 LQP15MN2N1 2.1 2.1 2.1 2.1 2.1 35 37 47 49 53 LQP15MN2N2 2.2 2.2 2.2 2.2 2.2 36 38 48 51 56 LQP15MN2N3 2.3 2.3 2.3 2.3 2.3 36 38 47 49 53 LQP15MN2N4 2.4 2.4 2.4 2.4 2.4 35 37 47 49 52 LQP15MN2N5 2.5 2.5 2.5 2.5 2.5 35 37 47 49 53 LQP15MN2N6 2.6 2.6 2.6 2.6 2.6 35 37 47 49 52 LQP15MN2N7 2.7 2.7 2.7 2.7 2.7 35 37 48 49 53 LQP15MN2N8 2.8 2.8 2.8 2.8 2.8 35 37 47 49 53 LQP15MN2N9 2.9 2.9 2.9 2.9 2.9 33 35 44 46 49 LQP15MN3N0 3.0 3.0 3.0 3.0 3.0 29 31 41 44 48 LQP15MN3N1 3.1 3.1 3.1 3.1 3.1 28 29 39 42 45 LQP15MN3N2 3.2 3.2 3.2 3.2 3.2 27 28 35 36 38 LQP15MN3N3 3.3 3.3 3.3 3.3 3.4 28 29 38 39 43 LQP15MN3N4 3.4 3.4 3.4 3.4 3.5 28 29 37 39 41 LQP15MN3N5 3.5 3.5 3.5 3.5 3.6 28 29 37 38 40 LQP15MN3N6 3.6 3.6 3.6 3.7 3.7 27 28 35 39 41 LQP15MN3N7 3.7 3.7 3.7 3.8 3.8 27 28 35 38 41 LQP15MN3N8 3.8 3.8 3.8 3.9 3.9 28 29 38 39 42 LQP15MN3N9 3.9 3.9 3.9 4.0 4.0 28 29 37 38 41 LQP15MN4N3 4.3 4.3 4.3 4.4 4.5 28 30 38 40 42 LQP15MN4N7 4.7 4.7 4.8 4.9 5.1 28 29 38 39 41 LQP15MN5N1 5.1 5.1 5.2 5.3 5.5 26 28 36 38 40 LQP15MN5N6 5.6 5.6 5.8 6.0 6.2 23 25 32 33 34 LQP15MN6N2 6.2 6.2 6.5 6.6 6.9 23 25 32 33 34 LQP15MN6N8 6.8 6.8 7.1 7.4 7.7 24 26 33 34 35 LQP15MN7N5 7.5 7.5 7.9 8.2 8.6 24 25 32 33 34 LQP15MN8N2 8.2 8.2 8.7 9.0 9.5 24 25 32 33 34 LQP15MN9N1 9.1 9.1 9.8 10 11 23 25 31 32 33 LQP15MN10N 10 10 11 12 13 24 26 30 31 31 LQP15MN12N 12 12 13 14 16 25 26 29 29 28 LQP15MN15N 15 15 18 19 23 23 25 26 27 25 LQP15MN18N 18 18 23 - - 22 23 24 - - LQP15MN22N 22 23 29 - - 22 23 22 - - LQP15MN27N 28 28 38 - - 22 23 21 - - LQP15MN33N 34 35 - - - 21 22 - - - 20 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. LQP18M Series 0.80.15 Features 1. Tight inductance tolerance (+-0.2nH, +-2%) realized by Murata's original film technology. Various inductance values enable assembly with no tuning. 2. Small size of LQP18M series is suitable for small hand held equipment, especially for card size equipment. 3. High Q at high frequency range 4. High self resonant frequency due to low stray capacitance and narrow inductance distribution provides stable inductance in high frequency circuits such as telecommunications equipment. 2 0.50.1 1.60.15 0.2 min. (in mm) Applications 1. High frequency circuits of mobile phones such as PA, ANT, VCO, SAW, etc. 2. Mobile phones such as GSM, CDMA, PDC, etc. 3. "Bluetooth" 4. W-LAN 5. High frequency circuits in general Inductance (nH) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Q (min.) LQP18MN1N3C02 1.3 0.2nH 500 300 0.3 max. 17 500 6000 0603 LQP18MN1N5C02 1.5 0.2nH 500 300 0.3 max. 17 500 6000 0603 LQP18MN1N8C02 1.8 0.2nH 500 250 0.4 max. 17 500 6000 0603 LQP18MN2N2C02 2.2 0.2nH 500 250 0.4 max. 17 500 6000 0603 LQP18MN2N7C02 2.7 0.2nH 500 250 0.4 max. 17 500 6000 0603 LQP18MN3N3C02 3.3 0.2nH 500 250 0.4 max. 17 500 6000 0603 LQP18MN3N9C02 3.9 0.2nH 500 200 0.5 max. 17 500 5900 0603 LQP18MN4N7C02 4.7 0.2nH 500 200 0.5 max. 17 500 5200 0603 LQP18MN5N6C02 5.6 0.2nH 500 200 0.6 max. 17 500 4700 0603 LQP18MN6N8C02 6.8 0.2nH 500 200 0.7 max. 17 500 4300 0603 LQP18MN8N2C02 8.2 0.2nH 500 150 0.8 max. 17 500 3600 0603 LQP18MN10NG02 10 2% 500 150 1.0 max. 17 500 3400 0603 LQP18MN12NG02 12 2% 500 150 1.0 max. 17 500 3000 0603 LQP18MN15NG02 15 2% 500 150 1.3 max. 17 500 2700 0603 LQP18MN18NG02 18 2% 500 100 1.5 max. 17 500 2300 0603 LQP18MN22NG02 22 2% 500 100 1.9 max. 17 500 2100 0603 LQP18MN27NG02 27 2% 500 100 2.4 max. 17 500 1900 0603 LQP18MN33NG02 33 2% 500 100 2.8 max. 17 500 1700 0603 LQP18MN39NG02 39 2% 500 100 2.8 max. 17 500 1400 0603 LQP18MN47NG02 47 2% 300 100 2.2 max. 17 300 1200 0603 LQP18MN56NG02 56 2% 300 50 3.4 max. 17 300 1000 0603 LQP18MN68NG02 68 2% 300 50 3.5 max. 17 300 900 0603 LQP18MN82NG02 82 2% 300 50 4.6 max. 17 300 800 0603 LQP18MNR10G02 100 2% 300 50 6.1 max. 17 300 700 0603 Part Number Test Frequency Self Resonance Frequency (min.) (MHz) (MHz) EIA Operating Temp. Range: -40C to +85C Only for reflow soldering. 21 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Q-Frequency Characteristics Inductance-Frequency Characteristics 200 1000 100nH 1.5nH 68nH 160 2 33nH 15nH Q Inductance (nH) 100 120 3.3nH 80 6.8nH 10 6.8nH 40 3.3nH 33nH 0 100 100nH 68nH 1000 Frequency (MHz) 22 15nH 10000 1 100 1.5nH 1000 Frequency (MHz) 10000 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Chip Coils High Frequency Wound Type LQW15A/LQW18A Series LQW15A_00 Series 3 0.100.05 0.50.1 The LQW15A series consists of air core chip coil using a miniature alumina core. The tight inductance tolerance (+-0.2nH, +-3%) is available due to Murata's original wound technology. The LQW15A series has high Q value in high frequency range and high self resonant frequency. It is suitable for high frequency circuits which are used in telecommunications equipment. 0.50.1 1.00.1 W W Inductance (nH) 0.60.1 1.5-23, 100, 120 0.50.1 24-91 Features 0.20.1 0.20.1 (in mm) 1. Horizontal wound structure enables tight inductance tolerance (+-0.2nH, +-3%) And tolerance of +-0.1nH, +-2% is available. 2. Wide variation in inductance value. 3. The subminiature dimensions (1.0x0.5mm) allow high density mounting. 4. The high self resonant frequency realizes high Q value and stable inductance at high frequency. 5. Low DC resistance design is ideal for low loss, high output and low power consumption. 6. Resin-coated surface enables excellent mounting. Applications 1. High frequency circuits of mobile phones such as PA, ANT, VCO, SAW, etc. 2. Mobile phones such as GSM, CDMA, PDC, etc. 3. "Bluetooth" 4. W-LAN 5. High frequency circuits in general Inductance (nH) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Q (min.) LQW15AN1N5B00 1.5 0.1nH 100 1000 0.03 max. 10 250 18.0 0402 LQW15AN1N5C00 1.5 0.2nH 100 1000 0.03 max. 10 250 18.0 0402 LQW15AN1N5D00 1.5 0.5nH 100 1000 0.03 max. 10 250 18.0 0402 LQW15AN2N4B00 2.4 0.1nH 100 850 0.05 max. 20 250 15.0 0402 LQW15AN2N4C00 2.4 0.2nH 100 850 0.05 max. 20 250 15.0 0402 LQW15AN2N4D00 2.4 0.5nH 100 850 0.05 max. 20 250 15.0 0402 LQW15AN2N5B00 2.5 0.1nH 100 850 0.05 max. 20 250 15.0 0402 LQW15AN2N5C00 2.5 0.2nH 100 850 0.05 max. 20 250 15.0 0402 LQW15AN2N5D00 2.5 0.5nH 100 850 0.05 max. 20 250 15.0 0402 LQW15AN2N7B00 2.7 0.1nH 100 850 0.05 max. 20 250 15.0 0402 LQW15AN2N7C00 2.7 0.2nH 100 850 0.05 max. 20 250 15.0 0402 LQW15AN2N7D00 2.7 0.5nH 100 850 0.05 max. 20 250 15.0 0402 LQW15AN2N9B00 2.9 0.1nH 100 750 0.07 max. 20 250 15.0 0402 LQW15AN2N9C00 2.9 0.2nH 100 750 0.07 max. 20 250 15.0 0402 LQW15AN2N9D00 2.9 0.5nH 100 750 0.07 max. 20 250 15.0 0402 LQW15AN3N9B00 3.9 0.1nH 100 750 0.07 max. 25 250 10.0 0402 LQW15AN3N9C00 3.9 0.2nH 100 750 0.07 max. 25 250 10.0 0402 LQW15AN3N9D00 3.9 0.5nH 100 750 0.07 max. 25 250 10.0 0402 Part Number Test Frequency Self Resonance Frequency (min.) (MHz) (GHz) EIA Continued on the following page. 23 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please O05E13.pdf 05.3.4 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Inductance (nH) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Q (min.) LQW15AN4N1B00 4.1 0.1nH 100 750 0.07 max. 25 250 10.0 0402 LQW15AN4N1C00 4.1 0.2nH 100 750 0.07 max. 25 250 10.0 0402 LQW15AN4N1D00 4.1 0.5nH 100 750 0.07 max. 25 250 10.0 0402 LQW15AN4N3B00 4.3 0.1nH 100 750 0.07 max. 25 250 10.0 0402 LQW15AN4N3C00 4.3 0.2nH 100 750 0.07 max. 25 250 10.0 0402 LQW15AN4N3D00 4.3 0.5nH 100 750 0.07 max. 25 250 10.0 0402 LQW15AN4N7B00 4.7 0.1nH 100 750 0.07 max. 25 250 8.0 0402 LQW15AN4N7C00 4.7 0.2nH 100 750 0.07 max. 25 250 8.0 0402 LQW15AN4N7D00 4.7 0.5nH 100 750 0.07 max. 25 250 8.0 0402 LQW15AN5N1B00 5.1 0.1nH 100 600 0.12 max. 25 250 8.0 0402 LQW15AN5N1C00 5.1 0.2nH 100 600 0.12 max. 25 250 8.0 0402 LQW15AN5N1D00 5.1 0.5nH 100 600 0.12 max. 25 250 8.0 0402 LQW15AN5N8B00 5.8 0.1nH 100 700 0.12 max. 25 250 8.0 0402 LQW15AN5N8C00 5.8 0.2nH 100 700 0.12 max. 25 250 8.0 0402 LQW15AN5N8D00 5.8 0.5nH 100 700 0.12 max. 25 250 8.0 0402 LQW15AN6N2B00 6.2 0.1nH 100 700 0.09 max. 25 250 8.0 0402 LQW15AN6N2C00 6.2 0.2nH 100 700 0.09 max. 25 250 8.0 0402 LQW15AN6N2D00 6.2 0.5nH 100 700 0.09 max. 25 250 8.0 0402 LQW15AN6N8G00 6.8 2% 100 700 0.09 max. 25 250 6.0 0402 LQW15AN6N8H00 6.8 3% 100 700 0.09 max. 25 250 6.0 0402 LQW15AN6N8J00 6.8 5% 100 700 0.09 max. 25 250 6.0 0402 LQW15AN7N3G00 7.3 2% 100 570 0.13 max. 25 250 6.0 0402 LQW15AN7N3H00 7.3 3% 100 570 0.13 max. 25 250 6.0 0402 LQW15AN7N3J00 7.3 5% 100 570 0.13 max. 25 250 6.0 0402 LQW15AN7N5G00 7.5 2% 100 570 0.13 max. 25 250 6.0 0402 LQW15AN7N5H00 7.5 3% 100 570 0.13 max. 25 250 6.0 0402 LQW15AN7N5J00 7.5 5% 100 570 0.13 max. 25 250 6.0 0402 LQW15AN8N2G00 8.2 2% 100 540 0.14 max. 25 250 5.5 0402 LQW15AN8N2H00 8.2 3% 100 540 0.14 max. 25 250 5.5 0402 LQW15AN8N2J00 8.2 5% 100 540 0.14 max. 25 250 5.5 0402 LQW15AN8N7G00 8.7 2% 100 540 0.14 max. 25 250 5.5 0402 LQW15AN8N7H00 8.7 3% 100 540 0.14 max. 25 250 5.5 0402 LQW15AN8N7J00 8.7 5% 100 540 0.14 max. 25 250 5.5 0402 LQW15AN9N1G00 9.1 2% 100 540 0.14 max. 25 250 5.5 0402 LQW15AN9N1H00 9.1 3% 100 540 0.14 max. 25 250 5.5 0402 LQW15AN9N1J00 9.1 5% 100 540 0.14 max. 25 250 5.5 0402 LQW15AN9N5G00 9.5 2% 100 540 0.14 max. 25 250 5.5 0402 LQW15AN9N5H00 9.5 3% 100 540 0.14 max. 25 250 5.5 0402 LQW15AN9N5J00 9.5 5% 100 540 0.14 max. 25 250 5.5 0402 LQW15AN10NG00 10 2% 100 500 0.17 max. 25 250 5.5 0402 LQW15AN10NH00 10 3% 100 500 0.17 max. 25 250 5.5 0402 LQW15AN10NJ00 10 5% 100 500 0.17 max. 25 250 5.5 0402 LQW15AN11NG00 11 2% 100 500 0.14 max. 30 250 5.5 0402 LQW15AN11NH00 11 3% 100 500 0.14 max. 30 250 5.5 0402 LQW15AN11NJ00 11 5% 100 500 0.14 max. 30 250 5.5 0402 LQW15AN12NG00 12 2% 100 500 0.14 max. 30 250 5.5 0402 LQW15AN12NH00 12 3% 100 500 0.14 max. 30 250 5.5 0402 LQW15AN12NJ00 12 5% 100 500 0.14 max. 30 250 5.5 0402 LQW15AN13NG00 13 2% 100 430 0.21 max. 25 250 5.0 0402 LQW15AN13NH00 13 3% 100 430 0.21 max. 25 250 5.0 0402 LQW15AN13NJ00 13 5% 100 430 0.21 max. 25 250 5.0 0402 LQW15AN15NG00 15 2% 100 460 0.16 max. 30 250 5.0 0402 LQW15AN15NH00 15 3% 100 460 0.16 max. 30 250 5.0 0402 LQW15AN15NJ00 15 5% 100 460 0.16 max. 30 250 5.0 0402 LQW15AN16NG00 16 2% 100 370 0.24 max. 25 250 4.5 0402 LQW15AN16NH00 16 3% 100 370 0.24 max. 25 250 4.5 0402 LQW15AN16NJ00 16 5% 100 370 0.24 max. 25 250 4.5 0402 Part Number 3 Test Frequency Self Resonance Frequency (min.) (MHz) (GHz) EIA Continued on the following page. 24 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please O05E13.pdf 05.3.4 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Inductance (nH) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Q (min.) LQW15AN18NG00 18 2% 100 370 0.27 max. 25 250 4.5 0402 LQW15AN18NH00 18 3% 100 370 0.27 max. 25 250 4.5 0402 LQW15AN18NJ00 18 5% 100 370 0.27 max. 25 250 4.5 0402 LQW15AN19NG00 19 2% 100 370 0.27 max. 25 250 4.5 0402 LQW15AN19NH00 19 3% 100 370 0.27 max. 25 250 4.5 0402 LQW15AN19NJ00 19 5% 100 370 0.27 max. 25 250 4.5 0402 LQW15AN20NG00 20 2% 100 370 0.27 max. 25 250 4.0 0402 LQW15AN20NH00 20 3% 100 370 0.27 max. 25 250 4.0 0402 LQW15AN20NJ00 20 5% 100 370 0.27 max. 25 250 4.0 0402 LQW15AN22NG00 22 2% 100 310 0.30 max. 25 250 4.0 0402 LQW15AN22NH00 22 3% 100 310 0.30 max. 25 250 4.0 0402 LQW15AN22NJ00 22 5% 100 310 0.30 max. 25 250 4.0 0402 LQW15AN23NG00 23 2% 100 310 0.30 max. 25 250 3.8 0402 LQW15AN23NH00 23 3% 100 310 0.30 max. 25 250 3.8 0402 LQW15AN23NJ00 23 5% 100 310 0.30 max. 25 250 3.8 0402 LQW15AN24NG00 24 2% 100 280 0.52 max. 25 250 3.5 0402 LQW15AN24NH00 24 3% 100 280 0.52 max. 25 250 3.5 0402 LQW15AN24NJ00 24 5% 100 280 0.52 max. 25 250 3.5 0402 LQW15AN27NG00 27 2% 100 280 0.52 max. 25 250 3.5 0402 LQW15AN27NH00 27 3% 100 280 0.52 max. 25 250 3.5 0402 LQW15AN27NJ00 27 5% 100 280 0.52 max. 25 250 3.5 0402 LQW15AN30NG00 30 2% 100 270 0.58 max. 25 250 3.3 0402 LQW15AN30NH00 30 3% 100 270 0.58 max. 25 250 3.3 0402 LQW15AN30NJ00 30 5% 100 270 0.58 max. 25 250 3.3 0402 LQW15AN33NG00 33 2% 100 260 0.63 max. 25 250 3.2 0402 LQW15AN33NH00 33 3% 100 260 0.63 max. 25 250 3.2 0402 LQW15AN33NJ00 33 5% 100 260 0.63 max. 25 250 3.2 0402 LQW15AN36NG00 36 2% 100 260 0.63 max. 25 250 3.1 0402 LQW15AN36NH00 36 3% 100 260 0.63 max. 25 250 3.1 0402 LQW15AN36NJ00 36 5% 100 260 0.63 max. 25 250 3.1 0402 LQW15AN39NG00 39 2% 100 250 0.70 max. 25 250 3.0 0402 LQW15AN39NH00 39 3% 100 250 0.70 max. 25 250 3.0 0402 LQW15AN39NJ00 39 5% 100 250 0.70 max. 25 250 3.0 0402 LQW15AN40NG00 40 2% 100 250 0.70 max. 25 250 3.0 0402 LQW15AN40NH00 40 3% 100 250 0.70 max. 25 250 3.0 0402 LQW15AN40NJ00 40 5% 100 250 0.70 max. 25 250 3.0 0402 LQW15AN43NG00 43 2% 100 250 0.70 max. 25 250 3.0 0402 LQW15AN43NH00 43 3% 100 250 0.70 max. 25 250 3.0 0402 LQW15AN43NJ00 43 5% 100 250 0.70 max. 25 250 3.0 0402 LQW15AN47NG00 47 2% 100 210 1.08 max. 25 200 2.9 0402 LQW15AN47NH00 47 3% 100 210 1.08 max. 25 200 2.9 0402 LQW15AN47NJ00 47 5% 100 210 1.08 max. 25 200 2.9 0402 LQW15AN51NG00 51 2% 100 210 1.08 max. 25 200 2.85 0402 LQW15AN51NH00 51 3% 100 210 1.08 max. 25 200 2.85 0402 LQW15AN51NJ00 51 5% 100 210 1.08 max. 25 200 2.85 0402 LQW15AN56NG00 56 2% 100 200 1.17 max. 25 200 2.8 0402 LQW15AN56NH00 56 3% 100 200 1.17 max. 25 200 2.8 0402 LQW15AN56NJ00 56 5% 100 200 1.17 max. 25 200 2.8 0402 LQW15AN62NG00 62 2% 100 145 1.82 max. 20 200 2.6 0402 LQW15AN62NH00 62 3% 100 145 1.82 max. 20 200 2.6 0402 LQW15AN62NJ00 62 5% 100 145 1.82 max. 20 200 2.6 0402 LQW15AN68NG00 68 2% 100 140 1.96 max. 20 200 2.5 0402 LQW15AN68NJ00 68 5% 100 140 1.96 max. 20 200 2.5 0402 LQW15AN72NG00 72 2% 100 135 2.10 max. 20 150 2.5 0402 LQW15AN72NJ00 72 5% 100 135 2.10 max. 20 150 2.5 0402 LQW15AN75NG00 75 2% 100 135 2.10 max. 20 150 2.4 0402 LQW15AN75NJ00 75 5% 100 135 2.10 max. 20 150 2.4 0402 Part Number Test Frequency Self Resonance Frequency (min.) (MHz) (GHz) EIA Continued on the following page. 25 3 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Inductance (nH) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Q (min.) LQW15AN82NG00 82 2% 100 130 2.24 max. 20 150 2.3 0402 LQW15AN82NJ00 82 5% 100 130 2.24 max. 20 150 2.3 0402 LQW15AN91NG00 91 2% 100 125 2.38 max. 20 150 2.1 0402 LQW15AN91NJ00 91 5% 100 125 2.38 max. 20 150 2.1 0402 LQW15ANR10J00 100 5% 100 120 2.52 max. 20 150 1.5 0402 LQW15ANR12J00 120 5% 100 110 2.66 max. 20 150 1.0 0402 Part Number EIA Operating Temp. Range: -55C to +125C Only for reflow soldering. Q-Frequency Characteristics Inductance-Frequency Characteristics 150 1000 120nH 82nH Inductance (nH) 4.7nH 100 10nH Q 3 Test Frequency Self Resonance Frequency (min.) (MHz) (GHz) 27nH 50 100 56nH 27nH 10nH 10 82nH 56nH 4.7nH 120nH 0 10 100 1000 Frequency (MHz) 10000 1 10 100 1000 10000 Frequency (MHz) Continued on the following page. 26 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Reference Data LQW15AN_00 Part Number E4991A & 16197A Inductance (nH) Q (Typ.) Nominal 300MHz 800MHz 900MHz 1.5GHz 1.8GHz 2.0GHz 2.4GHz LQW15AN1N5 1.5 30 55 60 65 90 100 115 LQW15AN2N4 2.4 40 65 67 80 98 108 120 67 LQW15AN2N5 2.5 40 65 88 90 100 110 LQW15AN2N7 2.7 40 67 73 85 100 105 120 LQW15AN2N9 2.9 33 53 58 75 80 85 92 LQW15AN3N9 3.9 35 58 61 82 88 92 100 LQW15AN4N1 4.1 35 58 61 82 88 92 100 LQW15AN4N3 4.3 35 58 61 90 88 92 100 LQW15AN4N7 4.7 40 65 67 85 88 92 95 LQW15AN5N1 5.1 35 60 65 78 85 90 95 LQW15AN5N8 5.8 40 63 67 85 88 92 105 LQW15AN6N2 6.2 40 63 65 80 90 95 105 LQW15AN6N8 6.8 45 70 72 90 96 100 103 LQW15AN7N3 7.3 38 58 63 75 88 90 92 LQW15AN7N5 7.5 38 58 63 75 88 90 92 LQW15AN8N2 8.2 40 62 67 80 90 95 102 LQW15AN8N7 8.7 40 60 62 80 85 90 92 LQW15AN9N1 9.1 40 62 68 85 90 92 95 95 LQW15AN9N5 9.5 40 62 68 85 90 92 LQW15AN10N 10 38 60 65 75 82 85 84 LQW15AN11N 11 40 65 70 90 105 110 120 LQW15AN12N 12 40 60 62 80 85 90 91 LQW15AN13N 13 40 60 62 70 72 71 67 65 LQW15AN15N 15 40 60 80 85 88 90 LQW15AN16N 16 40 60 63 80 90 100 110 LQW15AN18N 18 40 63 65 80 88 87 85 LQW15AN19N 19 37 57 62 78 80 82 83 LQW15AN20N 20 37 57 62 78 80 82 83 LQW15AN22N 22 35 55 58 73 75 78 - LQW15AN23N 23 35 55 58 73 75 78 - LQW15AN24N 24 35 50 50 48 42 - - LQW15AN27N 27 35 55 56 60 58 - - LQW15AN30N 30 35 55 58 65 68 - - LQW15AN33N 33 35 55 56 60 53 - - LQW15AN36N 36 35 52 52 48 42 - - LQW15AN39N 39 35 55 56 62 - - - LQW15AN40N 40 35 55 56 62 - - - LQW15AN43N 43 35 55 56 62 - - - LQW15AN47N 47 34 52 54 60 - - - LQW15AN51N 51 34 52 54 60 - - - LQW15AN56N 56 36 53 55 50 - - - LQW15AN62N 62 33 51 52 - - - - LQW15AN68N 68 35 49 52 - - - - LQW15AN72N 72 33 49 52 - - - - LQW15AN75N 75 33 49 52 - - - - LQW15AN82N 82 35 49 50 - - - - LQW15AN91N 91 35 52 53 - - - - LQW15ANR10 100 30 43 43 - - - - LQW15ANR12 120 28 30 23 - - - - 3 27 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Features 0.50.1 1.00.1 0.60.1 Applications 0.20.1 0.20.1 (in mm) 1. Cellular phone and Base station 2. W-CDMA, GSM, N-CDMA, PDC 3. Higher Q -- Matching circuit for antenna, SAWFIL 4. Lower Rdc -- Choke coil for IF, RF circuit like PA Equipment with high frequency circuits (Wireless LAN, etc.) Inductance (nH) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Q (min.) LQW15AN1N3C10 1.3 0.2nH 100 1200 0.017 max. 20 250 16.0 0402 LQW15AN1N3D10 1.3 0.5nH 100 1200 0.017 max. 20 250 16.0 0402 LQW15AN2N2C10 2.2 0.2nH 100 1000 0.027 max. 25 250 14.0 0402 LQW15AN2N2D10 2.2 0.5nH 100 1000 0.027 max. 25 250 14.0 0402 LQW15AN2N4D10 2.4 0.5nH 100 1000 0.027 max. 25 250 14.0 0402 LQW15AN3N3D10 3.3 0.5nH 100 900 0.040 max. 30 250 12.0 0402 LQW15AN3N6C10 3.6 0.2nH 100 900 0.040 max. 30 250 9.5 0402 LQW15AN3N6D10 3.6 0.5nH 100 900 0.040 max. 30 250 9.5 0402 LQW15AN3N9D10 3.9 0.5nH 100 900 0.040 max. 30 250 7.0 0402 LQW15AN4N7D10 4.7 0.5nH 100 800 0.051 max. 30 250 8.0 0402 LQW15AN5N1C10 5.1 0.2nH 100 800 0.051 max. 30 250 8.0 0402 LQW15AN5N1D10 5.1 0.5nH 100 800 0.051 max. 30 250 8.0 0402 LQW15AN5N6C10 5.6 0.2nH 100 800 0.051 max. 30 250 8.0 0402 LQW15AN5N6D10 5.6 0.5nH 100 800 0.051 max. 30 250 8.0 0402 Part Number Test Frequency Self Resonance Frequency (min.) (MHz) (GHz) EIA Operating Temp. Range: -55C to +125C Only for reflow soldering. Q-Frequency Characteristics Inductance-Frequency Characteristics 250 10 1.3nH 5.6nH Inductance (nH) 200 150 3.6nH Q 3 Lower DC resistance approximately by 50% than current type. Higher Q by 20%, larger rated current by 20%. Inductance range: 1.3 to 5.6nH Inductance tolerance: +-0.2 or 0.5nH Q (Typ.): 83 to 122 (at 1GHz) DC Resistance: 0.017 to 0.051 ohm Rated Current: 800 to 1200mA 0.100.05 0.50.1 LQW15A_10 Series (High Q/Low DC Resistance Type) 5.6nH 100 3.6nH 50 1.3nH 0 1 10 100 1000 Frequency (MHz) 10000 10 100 1000 10000 Frequency (MHz) Continued on the following page. 28 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Reference Data LQW15AN_10 Part Number E4991A & 16197A Inductance (nH) Q (Typ.) Nominal 800MHz 900MHz 1.0GHz 1.5GHz 1.8GHz 2.0GHz 2.4GHz LQW15AN1N3 1.3 90 95 100 130 145 160 180 LQW15AN2N2 2.2 85 90 95 115 130 140 160 LQW15AN2N4 2.4 80 85 90 110 130 140 160 LQW15AN3N3 3.3 80 85 90 110 120 128 140 LQW15AN3N6 3.6 73 75 85 100 110 115 130 LQW15AN3N9 3.9 75 80 83 95 110 115 120 LQW15AN4N7 4.7 75 80 85 100 113 120 132 LQW15AN5N1 5.1 75 80 85 100 110 115 128 LQW15AN5N6 5.6 70 75 78 95 100 105 110 3 0.4max LQW18A_00 Series Features 0.80.2 1. Broad range of inductance (2.2nH to 470nH) with E24 step line up. 2. Horizontal wound structure enables tight inductance tolerance (+-0.2nH, +-2%). Stable circuit operation is possible. 3. The subminiature dimensions (1.6x0.8mm) allow high density mounting. 4. The high self resonant frequency realizes high Q value and stable inductance at high frequency. 5. Low DC resistance design is ideal for low loss, high output and low power consumption. 6. Resin-coated surface enables excellent mounting. 0.800.15 0.20.1 1.60.2 *1 0.80.2 *1 LQW18AN_10 : 0.80.3 0.30.1 0.30.1 in mm Applications 1. High frequency circuits of mobile phones such as PA, ANT, VCO, SAW, etc. 2. Mobile phones such as GSM, CDMA, PDC, etc. 3. Bluetooth 4. W-LAN 5. High frequency circuits in general Inductance (nH) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Q (min.) LQW18AN2N2D00 2.2 0.5nH 100 700 0.049 max. 16 250 6000 0603 LQW18AN3N6C00 3.6 0.2nH 100 850 0.059 max. 25 250 6000 0603 LQW18AN3N6D00 3.6 0.5nH 100 850 0.059 max. 25 250 6000 0603 LQW18AN3N9C00 3.9 0.2nH 100 850 0.059 max. 35 250 6000 0603 LQW18AN3N9D00 3.9 0.5nH 100 850 0.059 max. 35 250 6000 0603 LQW18AN4N3C00 4.3 0.2nH 100 850 0.059 max. 35 250 6000 0603 LQW18AN4N3D00 4.3 0.5nH 100 850 0.059 max. 35 250 6000 0603 LQW18AN4N7D00 4.7 0.5nH 100 850 0.059 max. 35 250 6000 0603 LQW18AN5N6C00 5.6 0.2nH 100 750 0.082 max. 35 250 6000 0603 LQW18AN5N6D00 5.6 0.5nH 100 750 0.082 max. 35 250 6000 0603 LQW18AN6N2C00 6.2 0.2nH 100 750 0.082 max. 35 250 6000 0603 LQW18AN6N2D00 6.2 0.5nH 100 750 0.082 max. 35 250 6000 0603 LQW18AN6N8C00 6.8 0.2nH 100 750 0.082 max. 35 250 6000 0603 LQW18AN6N8D00 6.8 0.5nH 100 750 0.082 max. 35 250 6000 0603 LQW18AN7N5D00 7.5 0.5nH 100 750 0.082 max. 35 250 6000 0603 LQW18AN8N2D00 8.2 0.5nH 100 650 0.11 max. 35 250 6000 0603 LQW18AN8N7D00 8.7 0.5nH 100 650 0.11 max. 35 250 6000 0603 LQW18AN9N1D00 9.1 0.5nH 100 650 0.11 max. 35 250 6000 0603 LQW18AN9N5D00 9.5 0.5nH 100 650 0.11 max. 35 250 6000 0603 Part Number Test Frequency Self Resonance Frequency (min.) (MHz) (MHz) EIA Continued on the following page. 29 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please O05E13.pdf 05.3.4 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Inductance (nH) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Q (min.) LQW18AN10NG00 10 2% 100 650 0.11 max. 35 250 6000 0603 LQW18AN10NJ00 10 5% 100 650 0.11 max. 35 250 6000 0603 LQW18AN11NG00 11 2% 100 650 0.11 max. 35 250 6000 0603 LQW18AN11NJ00 11 5% 100 650 0.11 max. 35 250 6000 0603 LQW18AN12NG00 12 2% 100 600 0.13 max. 35 250 6000 0603 LQW18AN12NJ00 12 5% 100 600 0.13 max. 35 250 6000 0603 LQW18AN13NG00 13 2% 100 600 0.13 max. 35 250 6000 0603 LQW18AN13NJ00 13 5% 100 600 0.13 max. 35 250 6000 0603 LQW18AN15NG00 15 2% 100 600 0.13 max. 40 250 6000 0603 LQW18AN15NJ00 15 5% 100 600 0.13 max. 40 250 6000 0603 LQW18AN16NG00 16 2% 100 550 0.16 max. 40 250 5500 0603 LQW18AN16NJ00 16 5% 100 550 0.16 max. 40 250 5500 0603 LQW18AN18NG00 18 2% 100 550 0.16 max. 40 250 5500 0603 LQW18AN18NJ00 18 5% 100 550 0.16 max. 40 250 5500 0603 LQW18AN20NG00 20 2% 100 550 0.16 max. 40 250 4900 0603 LQW18AN20NJ00 20 5% 100 550 0.16 max. 40 250 4900 0603 LQW18AN22NG00 22 2% 100 500 0.17 max. 40 250 4600 0603 LQW18AN22NJ00 22 5% 100 500 0.17 max. 40 250 4600 0603 LQW18AN24NG00 24 2% 100 500 0.21 max. 40 250 3800 0603 LQW18AN24NJ00 24 5% 100 500 0.21 max. 40 250 3800 0603 LQW18AN27NG00 27 2% 100 440 0.21 max. 40 250 3700 0603 LQW18AN27NJ00 27 5% 100 440 0.21 max. 40 250 3700 0603 LQW18AN30NG00 30 2% 100 420 0.23 max. 40 250 3300 0603 LQW18AN30NJ00 30 5% 100 420 0.23 max. 40 250 3300 0603 LQW18AN33NG00 33 2% 100 420 0.23 max. 40 250 3200 0603 LQW18AN33NJ00 33 5% 100 420 0.23 max. 40 250 3200 0603 LQW18AN36NG00 36 2% 100 400 0.26 max. 40 250 2900 0603 LQW18AN36NJ00 36 5% 100 400 0.26 max. 40 250 2900 0603 LQW18AN39NG00 39 2% 100 400 0.26 max. 40 250 2800 0603 LQW18AN39NJ00 39 5% 100 400 0.26 max. 40 250 2800 0603 LQW18AN43NG00 43 2% 100 380 0.29 max. 40 200 2700 0603 LQW18AN43NJ00 43 5% 100 380 0.29 max. 40 200 2700 0603 LQW18AN47NG00 47 2% 100 380 0.29 max. 38 200 2600 0603 LQW18AN47NJ00 47 5% 100 380 0.29 max. 38 200 2600 0603 LQW18AN51NG00 51 2% 100 370 0.33 max. 38 200 2500 0603 LQW18AN51NJ00 51 5% 100 370 0.33 max. 38 200 2500 0603 LQW18AN56NG00 56 2% 100 360 0.35 max. 38 200 2400 0603 LQW18AN56NJ00 56 5% 100 360 0.35 max. 38 200 2400 0603 LQW18AN62NG00 62 2% 100 280 0.51 max. 38 200 2300 0603 LQW18AN62NJ00 62 5% 100 280 0.51 max. 38 200 2300 0603 LQW18AN68NG00 68 2% 100 340 0.38 max. 38 200 2200 0603 LQW18AN68NJ00 68 5% 100 340 0.38 max. 38 200 2200 0603 LQW18AN72NG00 72 2% 100 270 0.56 max. 34 150 2100 0603 LQW18AN72NJ00 72 5% 100 270 0.56 max. 34 150 2100 0603 LQW18AN75NG00 75 2% 100 270 0.56 max. 34 150 2050 0603 LQW18AN75NJ00 75 5% 100 270 0.56 max. 34 150 2050 0603 LQW18AN82NG00 82 2% 100 250 0.60 max. 34 150 2000 0603 LQW18AN82NJ00 82 5% 100 250 0.60 max. 34 150 2000 0603 LQW18AN91NG00 91 2% 100 230 0.64 max. 34 150 1900 0603 LQW18AN91NJ00 91 5% 100 230 0.64 max. 34 150 1900 0603 LQW18ANR10G00 100 2% 100 220 0.68 max. 34 150 1800 0603 LQW18ANR10J00 100 5% 100 220 0.68 max. 34 150 1800 0603 LQW18ANR11G00 110 2% 100 200 1.2 max. 32 150 1350 0603 LQW18ANR11J00 110 5% 100 200 1.2 max. 32 150 1350 0603 LQW18ANR12G00 120 2% 100 180 1.3 max. 32 150 1600 0603 LQW18ANR12J00 120 5% 100 180 1.3 max. 32 150 1600 0603 LQW18ANR13G00 130 2% 100 170 1.4 max. 32 150 1450 0603 Part Number 3 Test Frequency Self Resonance Frequency (min.) (MHz) (MHz) EIA Continued on the following page. 30 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Inductance (nH) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Q (min.) LQW18ANR13J00 130 5% 100 170 1.4 max. 32 150 1450 0603 LQW18ANR15G00 150 2% 100 160 1.5 max. 32 150 1400 0603 LQW18ANR15J00 150 5% 100 160 1.5 max. 32 150 1400 0603 LQW18ANR16G00 160 2% 100 150 2.1 max. 32 150 1350 0603 LQW18ANR16J00 160 5% 100 150 2.1 max. 32 150 1350 0603 LQW18ANR18G00 180 2% 100 140 2.2 max. 25 100 1300 0603 LQW18ANR18J00 180 5% 100 140 2.2 max. 25 100 1300 0603 LQW18ANR20G00 200 2% 100 120 2.4 max. 25 100 1250 0603 LQW18ANR20J00 200 5% 100 120 2.4 max. 25 100 1250 0603 LQW18ANR22G00 220 2% 100 120 2.5 max. 25 100 1200 0603 LQW18ANR22J00 220 5% 100 120 2.5 max. 25 100 1200 0603 LQW18ANR27G00 270 2% 100 110 3.4 max. 30 100 960 0603 LQW18ANR27J00 270 5% 100 110 3.4 max. 30 100 960 0603 LQW18ANR33G00 330 2% 100 85 5.5 max. 30 100 800 0603 LQW18ANR33J00 330 5% 100 85 5.5 max. 30 100 800 0603 LQW18ANR39G00 390 2% 100 80 6.2 max. 30 100 800 0603 LQW18ANR39J00 390 5% 100 80 6.2 max. 30 100 800 0603 LQW18ANR47G00 470 2% 100 75 7.0 max. 30 100 700 0603 LQW18ANR47J00 470 5% 100 75 7.0 max. 30 100 700 0603 Part Number Test Frequency Self Resonance Frequency (min.) (MHz) (MHz) EIA Operating Temp. Range: -55C to +125C Only for reflow soldering. Q-Frequency Characteristics Inductance-Frequency Characteristics 10000 120 8.7nH 100 470nH 220nH 20nH 1000 Inductance (nH) 80 47nH Q 60 100nH 40 100nH 100 47nH 20nH 10 8.7nH 20 470nH 0 10 100 1000 Frequency (MHz) 220nH 10000 1 10 100 1000 10000 Frequency (MHz) 31 3 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. 0.4max LQW18A_10 Series (High Q/Low DC Resistance Type) Features 0.800.15 0.20.1 1.60.2 *1 0.80.2 Applications *1 LQW18AN_10 : 0.80.3 Cellular phone and Base station. W-CDMA, GSM, N-CDMA, PDC. Higher Q -- Matching circuit for antenna, SAWFIL. Lower Rdc -- Choke coil for IF, RF circuit like PA. Equipment with high frequency circuits (Wireless LAN etc.) 0.30.1 0.30.1 in mm Inductance (nH) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Q (min.) LQW18AN2N2D10 2.2 0.5nH 100 1400 0.018 max. 25 250 18000 0603 LQW18AN3N9C10 3.9 0.2nH 100 1000 0.032 max. 38 250 11000 0603 LQW18AN3N9D10 3.9 0.5nH 100 1000 0.032 max. 38 250 11000 0603 LQW18AN5N6D10 5.6 0.5nH 100 900 0.045 max. 38 250 10000 0603 LQW18AN6N8C10 6.8 0.2nH 100 900 0.045 max. 38 250 7000 0603 LQW18AN6N8D10 6.8 0.5nH 100 900 0.045 max. 38 250 7000 0603 LQW18AN8N2D10 8.2 0.5nH 100 800 0.058 max. 38 250 7000 0603 LQW18AN10NG10 10 2% 100 800 0.058 max. 38 250 5000 0603 LQW18AN10NJ10 10 5% 100 800 0.058 max. 38 250 5000 0603 LQW18AN12NG10 12 2% 100 750 0.071 max. 38 250 5000 0603 LQW18AN12NJ10 12 5% 100 750 0.071 max. 38 250 5000 0603 LQW18AN15NJ10 15 5% 100 700 0.085 max. 42 250 4500 0603 LQW18AN18NG10 18 2% 100 700 0.085 max. 42 250 3500 0603 LQW18AN18NJ10 18 5% 100 700 0.085 max. 42 250 3500 0603 LQW18AN22NG10 22 2% 100 640 0.099 max. 42 250 3200 0603 LQW18AN22NJ10 22 5% 100 640 0.099 max. 42 250 3200 0603 LQW18AN27NG10 27 2% 100 590 0.116 max. 42 250 2800 0603 LQW18AN27NJ10 27 5% 100 590 0.116 max. 42 250 2800 0603 LQW18AN33NJ10 33 5% 100 550 0.132 max. 42 250 2500 0603 Part Number Test Frequency Self Resonance Frequency (min.) (MHz) (MHz) EIA Operating Temp. Range: -55C to +125C Only for reflow soldering. Q-Frequency Characteristics Inductance-Frequency Characteristics 100 200 33nH 2.2nH 10nH Q Inductance (nH) 3 0.80.2 DC Resistance is about 50% less than current type. Q is about 10% higher, and allowable current is about 20% higher than current type. Tight inductance tolerance is available. 100 33nH 10nH 10 2.2nH 0 10 1 100 1000 Frequency (MHz) 32 10000 10 100 1000 Frequency (MHz) 10000 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Chip Coils High Frequency Wound Type LQW2BH/LQW31H Series 1.50.2 1.50.2 1.7 -0.1 +0.08 LQW2BH series consists of air-core chip coil using a sub-miniature alumina core as a bobbin. The series has excellent solder heat resistance. Both flow and reflow soldering methods can be employed. 2.00.2 1.50.2 4 Features (LQW2BH_03) 1. Inductance: 3.3 to 470nH (Wide inductance ranges) 2. High self-resonant frequency characteristics 3. High Q value and highly stable inductance in high frequency 4. Low DC resistance and large rated current 0.5 min. 0.5 min. 0.5 min. (in mm) Features (LQW2BH_13) LQW2BH_13 using thick wire has higher Q value than existing LQW2BH_03 series. 1. Inductance: 2.7 to 27nH 2. DC resistance: 0.02 to 0.06 ohm 3. Q value: 85 to 95 (Typ.) at 800MHz 4. Rated current: 900 to 1900mA Applications 1. High frequency circuit in telecommunications equipment, such as DECT, PHS, PCS, PCN, GSM and CDMA. 2. Impedance Matching - PA module - SAW filter 3. Resonance circuit - VCO LQW2BH_03 Series Inductance (nH) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Q (min.) LQW2BHN3N3D03 3.3 0.5nH 100 910 0.05 max. 10 250 6000 0805 LQW2BHN6N8D03 6.8 0.5nH 100 680 0.11 max. 20 250 5400 0805 LQW2BHN8N2D03 8.2 0.5nH 100 630 0.12 max. 20 250 3900 0805 LQW2BHN10NJ03 10 5% 100 1320 0.03 max. 30 250 3300 0805 LQW2BHN12NJ03 12 5% 100 680 0.11 max. 30 250 3200 0805 LQW2BHN15NJ03 15 5% 100 630 0.12 max. 30 250 2700 0805 LQW2BHN18NJ03 18 5% 100 690 0.10 max. 30 250 2600 0805 LQW2BHN22NJ03 22 5% 100 720 0.09 max. 30 250 2100 0805 LQW2BHN27NJ03 27 5% 100 540 0.17 max. 40 250 2300 0805 LQW2BHN33NG03 33 2% 100 570 0.15 max. 40 250 1900 0805 LQW2BHN33NJ03 33 5% 100 570 0.15 max. 40 250 1900 0805 LQW2BHN39NG03 39 2% 100 730 0.09 max. 40 250 1700 0805 LQW2BHN39NJ03 39 5% 100 730 0.09 max. 40 250 1700 0805 LQW2BHN47NG03 47 2% 100 450 0.23 max. 40 200 1600 0805 LQW2BHN47NJ03 47 5% 100 450 0.23 max. 40 200 1600 0805 LQW2BHN56NG03 56 2% 100 430 0.26 max. 40 200 1500 0805 LQW2BHN56NJ03 56 5% 100 430 0.26 max. 40 200 1500 0805 Part Number Test Frequency Self Resonance Frequency (min.) (MHz) (MHz) EIA Continued on the following page. 33 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please O05E13.pdf 05.3.4 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Inductance (nH) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Q (min.) LQW2BHN68NG03 68 2% 100 460 0.23 max. 40 200 1200 0805 LQW2BHN68NJ03 68 5% 100 460 0.23 max. 40 200 1200 0805 LQW2BHN82NG03 82 2% 100 320 0.42 max. 40 150 1100 0805 LQW2BHN82NJ03 82 5% 100 320 0.42 max. 40 150 1100 0805 LQW2BHNR10G03 100 2% 100 270 0.55 max. 35 150 900 0805 LQW2BHNR10J03 100 5% 100 350 0.38 max. 40 150 900 0805 LQW2BHNR12G03 120 2% 100 320 0.40 max. 40 150 750 0805 LQW2BHNR12J03 120 5% 100 320 0.40 max. 40 150 750 0805 LQW2BHNR15G03 150 2% 100 260 0.68 max. 30 150 350 0805 LQW2BHNR15J03 150 5% 100 390 0.47 max. 30 150 350 0805 LQW2BHNR18G03 180 2% 100 250 0.71 max. 35 100 700 0805 LQW2BHNR18J03 180 5% 100 250 0.71 max. 35 100 700 0805 LQW2BHNR22G03 220 2% 100 240 0.70 max. 35 100 500 0805 LQW2BHNR22J03 220 5% 100 240 0.70 max. 35 100 500 0805 LQW2BHNR27J03 270 5% 10 190 2.00 max. 15 25.2 550 0805 LQW2BHNR27K03 270 10% 10 190 2.00 max. 15 25.2 550 0805 LQW2BHNR33J03 330 5% 10 180 2.20 max. 15 25.2 500 0805 LQW2BHNR33K03 330 10% 10 180 2.20 max. 15 25.2 500 0805 LQW2BHNR39J03 390 5% 10 170 2.50 max. 15 25.2 400 0805 LQW2BHNR39K03 390 10% 10 170 2.50 max. 15 25.2 400 0805 LQW2BHNR47J03 470 5% 10 160 2.80 max. 15 25.2 350 0805 LQW2BHNR47K03 470 10% 10 160 2.80 max. 15 25.2 350 0805 Part Number 4 Test Frequency Self Resonance Frequency (min.) (MHz) (MHz) EIA Operating Temp. Range: -25C to +85C LQW2BH_13 Series (High Q/Low DC Resistance Type) Inductance (nH) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Q (min.) LQW2BHN2N7D13 2.7 0.5nH 100 1900 0.02 max. 20 250 6000 0805 LQW2BHN3N1D13 3.1 0.5nH 100 1800 0.02 max. 20 250 6000 0805 LQW2BHN3N3D13 3.3 0.5nH 100 1700 0.02 max. 20 250 6000 0805 LQW2BHN5N6D13 5.6 0.5nH 100 1500 0.02 max. 35 250 6000 0805 LQW2BHN6N8D13 6.8 0.5nH 100 1400 0.02 max. 35 250 5400 0805 LQW2BHN8N6D13 8.6 0.5nH 100 1300 0.03 max. 35 250 3900 0805 LQW2BHN10NJ13 10 5% 100 1320 0.03 max. 35 250 3300 0805 LQW2BHN12NK13 12 10% 100 1100 0.04 max. 40 250 3200 0805 LQW2BHN15NK13 15 10% 100 1000 0.04 max. 40 250 3100 0805 LQW2BHN18NK13 18.8 10% 100 1000 0.05 max. 40 250 2600 0805 LQW2BHN21NK13 21 10% 100 950 0.05 max. 40 250 2200 0805 LQW2BHN27NK13 27 10% 100 900 0.06 max. 40 250 1800 0805 Part Number Operating Temp. Range: -25C to +85C 34 Test Frequency Self Resonance Frequency (min.) (MHz) (MHz) EIA O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Q-Frequency Characteristics LQW2BH_03 LQW2BH_13 140 140 3.3nH 120 120 100 100 80 Q 12nH 80 Q 60 60 330nH 470nH 40 40 20 0 1 10 100 1000 27nH 20 10nH 220nH 33nH 0 10 10000 100 Frequency (MHz) 1000 10000 4 Frequency (MHz) Inductance-Frequency Characteristics LQW2BH_03 LQW2BH_13 60 10000 27nH 330nH 50 470nH 270nH Inductance (nH) Inductance (nH) 1000 33nH 100 40 30 20 10nH 12nH 10 10 3.3nH 1 10 100 1000 Frequency (MHz) 10000 0 10 100 1000 10000 Frequency (MHz) 35 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. LQW31H Series 2.30.2 1.80.2 LQW31H series is alumina-core-type chip inductor for high frequency circuit. Its low dc resistance and high Q due to wound structure are suitable for hand held telecommunications equipment. 1.60.2 1.60.2 3.20.3 Features 4 1. Inductance range from 8.8 to 100nH. 2. Because of the high self resonant frequency, it can be used in high frequency range. 3. Tight inductance tolerance (+-5%) (in mm) 0.7 min. 0.7 min. 0.7 min. Inductance (nH) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Q (min.) LQW31HN8N8J03 8.8 5% 100 750 0.029 40% 50 436 1000 1206 LQW31HN8N8K03 8.8 10% 100 750 0.029 40% 50 436 1000 1206 LQW31HN15NJ03 14.7 5% 100 680 0.035 40% 60 436 1000 1206 LQW31HN15NK03 14.7 10% 100 680 0.035 40% 60 436 1000 1206 LQW31HN17NJ03 17 5% 100 650 0.037 40% 60 436 1000 1206 LQW31HN17NK03 17 10% 100 650 0.037 40% 60 436 1000 1206 LQW31HN23NJ03 23 5% 100 590 0.046 40% 60 436 1000 1206 LQW31HN23NK03 23 10% 100 590 0.046 40% 60 436 1000 1206 LQW31HN27NJ03 27 5% 100 560 0.051 40% 60 436 1000 1206 LQW31HN27NK03 27 10% 100 560 0.051 40% 60 436 1000 1206 LQW31HN33NJ03 33 5% 100 530 0.057 40% 60 436 1000 1206 LQW31HN33NK03 33 10% 100 530 0.057 40% 60 436 1000 1206 LQW31HN39NJ03 39 5% 100 490 0.067 40% 60 436 1000 1206 LQW31HN39NK03 39 10% 100 490 0.067 40% 60 436 1000 1206 LQW31HN47NJ03 47 5% 100 380 0.11 40% 60 436 1000 1206 LQW31HN47NK03 47 10% 100 380 0.11 40% 60 436 1000 1206 LQW31HN56NJ03 56 5% 100 330 0.14 40% 60 436 1000 1206 LQW31HN56NK03 56 10% 100 330 0.14 40% 60 436 1000 1206 LQW31HN64NJ03 64 5% 100 290 0.18 40% 60 436 1000 1206 LQW31HN64NK03 64 10% 100 290 0.18 40% 60 436 1000 1206 LQW31HN84NJ03 84 5% 100 240 0.28 40% 60 436 1000 1206 LQW31HN84NK03 84 10% 100 240 0.28 40% 60 436 1000 1206 LQW31HNR10J03 100 5% 100 230 0.3 40% 60 436 900 1206 LQW31HNR10K03 100 10% 100 230 0.3 40% 60 436 900 1206 Part Number Operating Temp. Range: -25C to +85C Q-Frequency Characteristics 120 8.8nH 39nH 100 80 Q 60 40 20 100nH 0 10 50 100 500 Frequency (MHz) 36 1000 5000 Test Frequency Self Resonance Frequency (min.) (MHz) (MHz) EIA O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Chip Coils High Frequency Wound Type LQH31H Series 2.30.2 1.80.2 LQH31H series is wound type chip coil with ferrite core for high frequency. 1.60.2 Features 1. Inductance range from 54 to 880nH 2. High Q value and stable inductance in high frequency range from 30 to 150MHz 3. Both flow and reflow soldering methods can be employed for excellent solder heat resistance. 1.60.2 3.20.3 5 (in mm) 0.7 min. 0.7 min. 0.7 min. Inductance (nH) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Q (min.) LQH31HN54NK03 54 10% 1 920 0.035 30% 50 100 800 1206 LQH31HN95NK03 95 10% 1 790 0.047 30% 60 100 650 1206 LQH31HNR14J03 145 5% 1 700 0.061 30% 60 100 500 1206 LQH31HNR14K03 145 10% 1 700 0.061 30% 60 100 500 1206 LQH31HNR21J03 215 5% 1 520 0.11 30% 60 100 430 1206 LQH31HNR21K03 215 10% 1 520 0.11 30% 60 100 430 1206 LQH31HNR29J03 290 5% 1 420 0.17 30% 60 100 360 1206 LQH31HNR29K03 290 10% 1 420 0.17 30% 60 100 360 1206 LQH31HNR39J03 390 5% 1 330 0.26 30% 60 100 300 1206 LQH31HNR39K03 390 10% 1 330 0.26 30% 60 100 300 1206 LQH31HNR50J03 500 5% 1 260 0.44 30% 60 100 270 1206 LQH31HNR50K03 500 10% 1 260 0.44 30% 60 100 270 1206 LQH31HNR61J03 610 5% 1 250 0.48 30% 60 100 240 1206 LQH31HNR61K03 610 10% 1 250 0.48 30% 60 100 240 1206 LQH31HNR75J03 750 5% 1 190 0.79 30% 60 100 220 1206 LQH31HNR75K03 750 10% 1 190 0.79 30% 60 100 220 1206 LQH31HNR88J03 880 5% 1 180 0.86 30% 60 100 200 1206 LQH31HNR88K03 880 10% 1 180 0.86 30% 60 100 200 1206 Part Number Test Frequency Self Resonance Frequency (min.) (MHz) (MHz) EIA Operating Temp. Range: -25C to +85C Q-Frequency Characteristics 100 215nH 880nH 80 54nH 60 Q 40 20 0 1 5 10 50 100 500 1000 Frequency (MHz) 37 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Chip Coils for General Use Monolithic Type LQM18N/LQM21N Series LQM18N Series The LQM18N series of magnetically shielded chip coils was developed by using original multilayer process technology and magnetic materials. Compact size is suitable for high density mounting. Shielded construction is not affected by interference from peripheral components. 0.40.2 0.80.15 Electrode 0.80.15 1.60.15 Features 6 1. Magnetically shielded structure provides excellent characteristics in crosstalk and magnetic coupling. 2. Compact size (1.6x0.8mm) and light weight 3. The external electrodes with nickel barrier structure provide excellent solder heat resistance. Both flow and reflow soldering can be applicable. (in mm) Applications 1. Resonance circuit, traps, filter circuits 2. RF choke in telecommunications equipment, cordless phones, radio equipment Inductance (nH) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Q (min.) LQM18NN47NM00 47 20% 50 50 0.30 max. 10 50 260 0603 LQM18NN68NM00 68 20% 50 50 0.30 max. 10 50 250 0603 LQM18NN82NM00 82 20% 50 50 0.30 max. 10 50 245 0603 LQM18NNR10K00 100 10% 25 50 0.50 max. 15 25 240 0603 LQM18NNR12K00 120 10% 25 50 0.50 max. 15 25 205 0603 LQM18NNR15K00 150 10% 25 50 0.60 max. 15 25 180 0603 LQM18NNR18K00 180 10% 25 50 0.60 max. 15 25 165 0603 LQM18NNR22K00 220 10% 25 50 0.80 max. 15 25 150 0603 LQM18NNR27K00 270 10% 25 50 0.80 max. 15 25 136 0603 LQM18NNR33K00 330 10% 25 35 0.85 max. 15 25 125 0603 LQM18NNR39K00 390 10% 25 35 1.00 max. 15 25 110 0603 LQM18NNR47K00 470 10% 25 35 1.35 max. 15 25 105 0603 LQM18NNR56K00 560 10% 25 35 1.55 max. 15 25 95 0603 LQM18NNR68K00 680 10% 25 35 1.70 max. 15 25 90 0603 LQM18NNR82K00 820 10% 25 35 2.10 max. 15 25 85 0603 LQM18NN1R0K00 1000 10% 10 25 0.60 max. 35 10 75 0603 LQM18NN1R2K00 1200 10% 10 25 0.80 max. 35 10 65 0603 LQM18NN1R5K00 1500 10% 10 25 0.80 max. 35 10 60 0603 LQM18NN1R8K00 1800 10% 10 25 0.95 max. 35 10 55 0603 LQM18NN2R2K00 2200 10% 10 15 1.15 max. 35 10 50 0603 Part Number Operating Temp. Range: -40C to +85C 38 Test Frequency Self Resonance Frequency (min.) (MHz) (MHz) EIA O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Q-Frequency Characteristics Inductance-Frequency Characteristics 10000 80 2200nH 60 820nH Inductance (nH) Q 2200nH 40 100nH 1000 100nH 100 820nH 47nH 20 47nH 0 1 10 100 10 1000 1 10 100 1000 Frequency (MHz) Frequency (MHz) LQM21N Series 0.50.3 Electrode Features The LQM21N series consists of magnetically shielded chip inductors developed using Murata's original multilayer process technology and magnetic materials. The miniature size of 2.0x1.25mm enables compact design of electric equipment. Inductance range from 0.1 micro H to 4.7 micro H is available. t 6 1.250.2 2.00.3 (in mm) Dimension of t Inductance : 0.1 to 2.2H 0.850.2 Inductance : 2.7 to 4.7H 1.250.2 Inductance (H) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Q (min.) LQM21NNR10K10 0.1 10% 25 250 0.26 max. 20 25 340 0805 LQM21NNR12K10 0.12 10% 25 250 0.29 max. 20 25 310 0805 LQM21NNR15K10 0.15 10% 25 250 0.32 max. 20 25 270 0805 LQM21NNR18K10 0.18 10% 25 250 0.35 max. 20 25 250 0805 LQM21NNR22K10 0.22 10% 25 250 0.38 max. 20 25 220 0805 LQM21NNR27K10 0.27 10% 25 250 0.42 max. 20 25 200 0805 LQM21NNR33K10 0.33 10% 25 250 0.48 max. 20 25 180 0805 LQM21NNR39K10 0.39 10% 25 200 0.53 max. 25 25 165 0805 LQM21NNR47K10 0.47 10% 25 200 0.57 max. 25 25 150 0805 LQM21NNR56K10 0.56 10% 25 150 0.63 max. 25 25 140 0805 LQM21NNR68K10 0.68 10% 25 150 0.72 max. 25 25 125 0805 LQM21NNR82K10 0.82 10% 25 150 0.81 max. 25 25 115 0805 LQM21NN1R0K10 1 10% 10 50 0.40 max. 45 10 107 0805 LQM21NN1R2K10 1.2 10% 10 50 0.47 max. 45 10 97 0805 LQM21NN1R5K10 1.5 10% 10 50 0.50 max. 45 10 87 0805 LQM21NN1R8K10 1.8 10% 10 50 0.57 max. 45 10 80 0805 LQM21NN2R2K10 2.2 10% 10 30 0.63 max. 45 10 71 0805 LQM21NN2R7K10 2.7 10% 10 30 0.69 max. 45 10 66 0805 LQM21NN3R3K10 3.3 10% 10 30 0.80 max. 45 10 59 0805 LQM21NN3R9K10 3.9 10% 10 30 0.89 max. 45 10 53 0805 LQM21NN4R7K10 4.7 10% 10 30 1.00 max. 45 10 47 0805 Part Number Test Frequency Self Resonance Frequency (min.) (MHz) (MHz) EIA Operating Temp. Range: -40C to +85C 39 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Q-Frequency Characteristics Inductance-Current Characteristics 100 50 1.0H 80 1.8H 0.1H 4.7H 10 0.22H 60 4.7H 5 Inductance (H) Q 40 0.18H 20 1.8H 1 1.0H 0.82H 0 0.5 1 10 Frequency (MHz) 100 1000 0.22H 0.10H 0.1 1 5 10 50 Current (mA) 6 40 100 500 1000 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Chip Coils for General Use Wound Type LQH31M/LQH32M/LQH43M (N) Series LQH31M Series 2.30.2 1.60.2 1.80.2 LQH31M series consists of wound type chip coils using Murata's original ferrite core and auto winding technology. Features 1.60.2 3.20.3 1. Wide inductance range from 0.15 to 100 micro H 2. High Q value at high frequencies and low DC resistance 3. Small size (3.2x1.6x1.8mm) and tight pitch mounting 4. Low DC resistance and large current 5. Both flow and reflow soldering heat resistance (in mm) 0.7 min. 0.7 min. 0.7 min. Inductance (H) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Q (min.) LQH31MNR15K03 0.15 10% 1 250 0.39 40% 20 25 250 1206 LQH31MNR22K03 0.22 10% 1 240 0.43 40% 20 25 250 1206 LQH31MNR33K03 0.33 10% 1 230 0.45 40% 30 25 250 1206 LQH31MNR47K03 0.47 10% 1 215 0.83 40% 30 25 200 1206 LQH31MNR56K03 0.56 10% 1 200 0.61 40% 30 25 180 1206 LQH31MNR68K03 0.68 10% 1 190 0.67 40% 30 25 160 1206 LQH31MNR82K03 0.82 10% 1 185 0.73 40% 30 25 120 1206 LQH31MN1R0K03 1.0 10% 1 175 0.49 30% 35 10 100 1206 LQH31MN1R2K03 1.2 10% 1 165 0.9 30% 35 10 90 1206 LQH31MN1R5J03 1.5 5% 1 155 1.0 30% 35 10 75 1206 LQH31MN1R5K03 1.5 10% 1 155 1.0 30% 35 10 75 1206 LQH31MN1R8J03 1.8 5% 1 150 1.6 30% 35 10 60 1206 LQH31MN1R8K03 1.8 10% 1 150 1.6 30% 35 10 60 1206 LQH31MN2R2J03 2.2 5% 1 140 0.7 30% 35 10 50 1206 LQH31MN2R2K03 2.2 10% 1 140 0.7 30% 35 10 50 1206 LQH31MN2R7J03 2.7 5% 1 135 0.55 30% 35 10 43 1206 LQH31MN2R7K03 2.7 10% 1 135 0.55 30% 35 10 43 1206 LQH31MN3R3J03 3.3 5% 1 130 1.4 30% 35 8 38 1206 LQH31MN3R3K03 3.3 10% 1 130 1.4 30% 35 8 38 1206 LQH31MN3R9J03 3.9 5% 1 125 1.5 30% 35 8 35 1206 LQH31MN3R9K03 3.9 10% 1 125 1.5 30% 35 8 35 1206 LQH31MN4R7J03 4.7 5% 1 120 1.7 30% 35 8 31 1206 LQH31MN4R7K03 4.7 10% 1 120 1.7 30% 35 8 31 1206 LQH31MN5R6J03 5.6 5% 1 115 1.8 30% 35 8 28 1206 LQH31MN5R6K03 5.6 10% 1 115 1.8 30% 35 8 28 1206 LQH31MN6R8J03 6.8 5% 1 110 2.0 30% 35 8 25 1206 LQH31MN6R8K03 6.8 10% 1 110 2.0 30% 35 8 25 1206 LQH31MN8R2J03 8.2 5% 1 105 2.2 30% 35 8 23 1206 LQH31MN8R2K03 8.2 10% 1 105 2.2 30% 35 8 23 1206 LQH31MN100J03 10 5% 1 100 2.5 30% 35 5 20 1206 LQH31MN100K03 10 10% 1 100 2.5 30% 35 5 20 1206 LQH31MN120J03 12 5% 1 95 2.7 30% 35 5 18 1206 LQH31MN120K03 12 10% 1 95 2.7 30% 35 5 18 1206 LQH31MN150J03 15 5% 1 90 3.0 30% 35 5 16 1206 LQH31MN150K03 15 10% 1 90 3 30% 35 5 16 1206 LQH31MN180J03 18 5% 1 85 3.4 30% 35 5 15 1206 Part Number Test Frequency Self Resonance Frequency (min.) (MHz) (MHz) EIA Continued on the following page. 41 7 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Inductance (H) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Q (min.) LQH31MN180K03 18 10% 1 85 3.4 30% 35 5 15 1206 LQH31MN220J03 22 5% 1 85 3.1 30% 40 2.5 14 1206 LQH31MN220K03 22 10% 1 85 3.1 30% 40 2.5 14 1206 LQH31MN270J03 27 5% 1 85 3.4 30% 40 2.5 13 1206 LQH31MN270K03 27 10% 1 85 3.4 30% 40 2.5 13 1206 LQH31MN330J03 33 5% 1 80 3.8 30% 40 2.5 12 1206 LQH31MN330K03 33 10% 1 80 3.8 30% 40 2.5 12 1206 LQH31MN390J03 39 5% 1 55 7.2 30% 40 2.5 11 1206 LQH31MN390K03 39 10% 1 55 7.2 30% 40 2.5 11 1206 LQH31MN470J03 47 5% 1 55 8 30% 40 2.5 10 1206 LQH31MN470K03 47 10% 1 55 8.0 30% 40 2.5 10 1206 LQH31MN560J03 56 5% 1 50 8.9 30% 40 2.5 9 1206 LQH31MN560K03 56 10% 1 50 8.9 30% 40 2.5 9 1206 LQH31MN680J03 68 5% 1 50 9.9 30% 40 2.5 8.5 1206 LQH31MN680K03 68 10% 1 50 9.9 30% 40 2.5 8.5 1206 LQH31MN820J03 82 5% 1 45 11 30% 40 2.5 7.5 1206 LQH31MN820K03 82 10% 1 45 11 30% 40 2.5 7.5 1206 LQH31MN101J03 100 5% 1 45 12 30% 40 2.5 7 1206 LQH31MN101K03 100 10% 1 45 12 30% 40 2.5 7 1206 Part Number Test Frequency Self Resonance Frequency (min.) (MHz) (MHz) Operating Temp. Range: -25C to +85C Q-Frequency Characteristics Inductance-Current Characteristics 100 500 80 100H 10H 100H 1H 100 60 Q Inductance (H) 50 40 20 33H 10H 10 0 0.5 1 5 10 50 100 5 Frequency (MHz) 1.0H 1 5 10 50 100 Current (mA) Coupling Coefficient 10 Coupling Coefficient (%) 7 8 R 6 R=0.9mm (2.5mm Pitch Parallel Mounting) 4 2 R=2.0mm 0 0.5 1 5 Inductance (H) 42 10 50 100 500 EIA O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. LQH32M Series 2.50.2 2.50.2 2.00.2 LQH32M series consists of miniature chip inductors wound on a special ferrite core. Features 2.50.2 3.20.3 1. High Q value at high frequencies and low DC resistance 2. Wide inductance range from 1.0 to 560 micro H 0.90.3 1.30.2 0.90.3 (in mm) Inductance (H) Test Frequency Rated Current (mA) DC Resistance (ohm) Q (min.) LQH32MN1R0M23 1.0 20% 1MHz 445 0.5 max. 20 1MHz 100 1210 LQH32MN1R2M23 1.2 20% 1MHz 425 0.6 max. 20 1MHz 100 1210 LQH32MN1R5K23 1.5 10% 1MHz 400 0.6 max. 20 1MHz 75 1210 LQH32MN1R8K23 1.8 10% 1MHz 390 0.7 max. 20 1MHz 60 1210 LQH32MN2R2K23 2.2 10% 1MHz 370 0.8 max. 20 1MHz 50 1210 LQH32MN2R7K23 2.7 10% 1MHz 320 0.9 max. 20 1MHz 43 1210 LQH32MN3R3K23 3.3 10% 1MHz 300 1.0 max. 20 1MHz 38 1210 LQH32MN3R9K23 3.9 10% 1MHz 290 1.1 max. 20 1MHz 35 1210 LQH32MN4R7K23 4.7 10% 1MHz 270 1.2 max. 20 1MHz 31 1210 LQH32MN5R6K23 5.6 10% 1MHz 250 1.3 max. 20 1MHz 28 1210 LQH32MN6R8K23 6.8 10% 1MHz 240 1.5 max. 20 1MHz 25 1210 LQH32MN8R2K23 8.2 10% 1MHz 225 1.6 max. 20 1MHz 23 1210 LQH32MN100J23 10 5% 1MHz 190 1.8 max. 35 1MHz 20 1210 LQH32MN100K23 10 10% 1MHz 190 1.8 max. 35 1MHz 20 1210 LQH32MN120J23 12 5% 1MHz 180 2.0 max. 35 1MHz 18 1210 LQH32MN120K23 12 10% 1MHz 180 2.0 max. 35 1MHz 18 1210 LQH32MN150J23 15 5% 1MHz 170 2.2 max. 35 1MHz 16 1210 LQH32MN150K23 15 10% 1MHz 170 2.2 max. 35 1MHz 16 1210 LQH32MN180J23 18 5% 1MHz 165 2.5 max. 35 1MHz 15 1210 LQH32MN180K23 18 10% 1MHz 165 2.5 max. 35 1MHz 15 1210 LQH32MN220J23 22 5% 1MHz 150 2.8 max. 35 1MHz 14 1210 LQH32MN220K23 22 10% 1MHz 150 2.8 max. 35 1MHz 14 1210 LQH32MN270J23 27 5% 1MHz 125 3.1 max. 35 1MHz 13 1210 LQH32MN270K23 27 10% 1MHz 125 3.1 max. 35 1MHz 13 1210 LQH32MN330J23 33 5% 1MHz 115 3.5 max. 40 1MHz 12 1210 LQH32MN330K23 33 10% 1MHz 115 3.5 max. 40 1MHz 12 1210 LQH32MN390J23 39 5% 1MHz 110 3.9 max. 40 1MHz 11 1210 LQH32MN390K23 39 10% 1MHz 110 3.9 max. 40 1MHz 11 1210 LQH32MN470J23 47 5% 1MHz 100 4.3 max. 40 1MHz 11 1210 LQH32MN470K23 47 10% 1MHz 100 4.3 max. 40 1MHz 11 1210 LQH32MN560J23 56 5% 1MHz 85 4.9 max. 40 1MHz 10 1210 LQH32MN560K23 56 10% 1MHz 85 4.9 max. 40 1MHz 10 1210 LQH32MN680J23 68 5% 1MHz 80 5.5 max. 40 1MHz 9 1210 LQH32MN680K23 68 10% 1MHz 80 5.5 max. 40 1MHz 9 1210 LQH32MN820J23 82 5% 1MHz 70 6.2 max. 40 1MHz 8.5 1210 LQH32MN820K23 82 10% 1MHz 70 6.2 max. 40 1MHz 8.5 1210 LQH32MN101J23 100 5% 1MHz 80 7.0 max. 40 796kHz 8 1210 LQH32MN101K23 100 10% 1MHz 80 7.0 max. 40 796kHz 8 1210 LQH32MN121J23 120 5% 1MHz 75 8.0 max. 40 796kHz 7.5 1210 LQH32MN121K23 120 10% 1MHz 75 8.0 max. 40 796kHz 7.5 1210 LQH32MN151J23 150 5% 1MHz 70 9.3 max. 40 796kHz 7 1210 LQH32MN151K23 150 10% 1MHz 70 9.3 max. 40 796kHz 7 1210 Part Number Self Resonance Test Frequency Frequency (min.) (MHz) EIA Continued on the following page. 43 7 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Inductance (H) Test Frequency Rated Current (mA) DC Resistance (ohm) Q (min.) LQH32MN181J23 180 5% 1MHz 65 10.2 max. 40 796kHz 6 1210 LQH32MN181K23 180 10% 1MHz 65 10.2 max. 40 796kHz 6 1210 LQH32MN221J23 220 5% 1MHz 65 11.8 max. 40 796kHz 5.5 1210 LQH32MN221K23 220 10% 1MHz 65 11.8 max. 40 796kHz 5.5 1210 LQH32MN271J23 270 5% 1MHz 65 12.5 max. 40 796kHz 5 1210 LQH32MN271K23 270 10% 1MHz 65 12.5 max. 40 796kHz 5 1210 LQH32MN331J23 330 5% 1MHz 65 13.0 max. 40 796kHz 5 1210 LQH32MN331K23 330 10% 1MHz 65 13.0 max. 40 796kHz 5 1210 LQH32MN391J23 390 5% 1MHz 50 22.0 max. 50 796kHz 5 1210 LQH32MN391K23 390 10% 1MHz 50 22.0 max. 50 796kHz 5 1210 LQH32MN471J23 470 5% 1kHz 45 25.0 max. 50 796kHz 5 1210 LQH32MN471K23 470 10% 1kHz 45 25.0 max. 50 796kHz 5 1210 LQH32MN561J23 560 5% 1kHz 40 28.0 max. 50 796kHz 5 1210 LQH32MN561K23 560 10% 1kHz 40 28.0 max. 50 796kHz 5 1210 Part Number Self Resonance Test Frequency Frequency (min.) (MHz) Operating Temp. Range: -25C to +85C Q-Frequency Characteristics Inductance-Current Characteristics 100 500 220H 80 7 100H 100H 10H 100 60 Q 39H 50 Inductance (H) 1H 40 20 10H 10 0 3.9H 0.1 0.5 1 5 10 5 Frequency (MHz) 1.0H 1 5 10 50 100 Current (mA) 44 500 EIA O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. LQH43M/N Series 3.20.2 3.60.2 2.60.2 LQH43M/N series consists of wound type chip coils for general use by Murata's original auto winding technology and ferrite core. 3.20.2 4.50.3 Features 1. High Q value at high frequency and low DC resistance 2. Wide inductance range from 1.0 to 2200 micro H 3. Large current and large inductance (in mm) 1.0min. 1.0min. 1.0min. Inductance (H) Test Frequency Rated Current (mA) DC Resistance (ohm) Q (min.) LQH43MN1R0M03 1.0 20% 1MHz 500 0.20 max. 20 1MHz 120 1812 LQH43MN1R2M03 1.2 20% 1MHz 500 0.20 max. 20 1MHz 100 1812 LQH43MN1R5M03 1.5 20% 1MHz 500 0.30 max. 20 1MHz 85 1812 LQH43MN1R8M03 1.8 20% 1MHz 500 0.30 max. 20 1MHz 75 1812 LQH43MN2R2M03 2.2 20% 1MHz 500 0.30 max. 20 1MHz 62 1812 LQH43MN2R7M03 2.7 20% 1MHz 500 0.32 max. 20 1MHz 53 1812 LQH43MN3R3M03 3.3 20% 1MHz 500 0.35 max. 20 1MHz 47 1812 LQH43MN3R9M03 3.9 20% 1MHz 500 0.38 max. 20 1MHz 41 1812 LQH43MN4R7K03 4.7 10% 1MHz 500 0.40 max. 30 1MHz 38 1812 LQH43MN5R6K03 5.6 10% 1MHz 500 0.47 max. 30 1MHz 33 1812 LQH43MN6R8K03 6.8 10% 1MHz 450 0.50 max. 30 1MHz 31 1812 LQH43MN8R2K03 8.2 10% 1MHz 450 0.56 max. 30 1MHz 27 1812 LQH43MN100J03 10 5% 1MHz 400 0.56 max. 35 1MHz 23 1812 LQH43MN100K03 10 10% 1MHz 400 0.56 max. 35 1MHz 23 1812 LQH43MN120J03 12 5% 1MHz 380 0.62 max. 35 1MHz 21 1812 LQH43MN120K03 12 10% 1MHz 380 0.62 max. 35 1MHz 21 1812 LQH43MN150J03 15 5% 1MHz 360 0.73 max. 35 1MHz 19 1812 LQH43MN150K03 15 10% 1MHz 360 0.73 max. 35 1MHz 19 1812 LQH43MN180J03 18 5% 1MHz 340 0.82 max. 35 1MHz 17 1812 LQH43MN180K03 18 10% 1MHz 340 0.82 max. 35 1MHz 17 1812 LQH43MN220J03 22 5% 1MHz 320 0.94 max. 35 1MHz 15 1812 LQH43MN220K03 22 10% 1MHz 320 0.94 max. 35 1MHz 15 1812 LQH43MN270J03 27 5% 1MHz 300 1.1 max. 35 1MHz 14 1812 LQH43MN270K03 27 10% 1MHz 300 1.1 max. 35 1MHz 14 1812 LQH43MN330J03 33 5% 1MHz 270 1.2 max. 35 1MHz 12 1812 LQH43MN330K03 33 10% 1MHz 270 1.2 max. 35 1MHz 12 1812 LQH43MN390J03 39 5% 1MHz 240 1.4 max. 35 1MHz 11 1812 LQH43MN390K03 39 10% 1MHz 240 1.4 max. 35 1MHz 11 1812 LQH43MN470J03 47 5% 1MHz 220 1.5 max. 35 1MHz 10 1812 LQH43MN470K03 47 10% 1MHz 220 1.5 max. 35 1MHz 10 1812 LQH43MN560J03 56 5% 1MHz 200 1.7 max. 35 1MHz 9.3 1812 LQH43MN560K03 56 10% 1MHz 200 1.7 max. 35 1MHz 9.3 1812 LQH43MN680J03 68 5% 1MHz 180 1.9 max. 35 1MHz 8.4 1812 LQH43MN680K03 68 10% 1MHz 180 1.9 max. 35 1MHz 8.4 1812 LQH43MN820J03 82 5% 1MHz 170 2.2 max. 35 1MHz 7.5 1812 LQH43MN820K03 82 10% 1MHz 170 2.2 max. 35 1MHz 7.5 1812 LQH43MN101J03 100 5% 1MHz 160 2.5 max. 40 796kHz 6.8 1812 LQH43MN101K03 100 10% 1MHz 160 2.5 max. 40 796kHz 6.8 1812 LQH43MN121J03 120 5% 1MHz 150 3.0 max. 40 796kHz 6.2 1812 LQH43MN121K03 120 10% 1MHz 150 3.0 max. 40 796kHz 6.2 1812 LQH43MN151J03 150 5% 1MHz 130 3.7 max. 40 796kHz 5.5 1812 LQH43MN151K03 150 10% 1MHz 130 3.7 max. 40 796kHz 5.5 1812 Part Number Self Resonance Test Frequency Frequency (min.) (MHz) EIA Continued on the following page. 45 7 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Inductance (H) Test Frequency Rated Current (mA) DC Resistance (ohm) Q (min.) LQH43MN181J03 180 5% 1MHz 120 4.5 max. 40 796kHz 5 1812 LQH43MN181K03 180 10% 1MHz 120 4.5 max. 40 796kHz 5 1812 LQH43MN221J03 220 5% 1MHz 110 5.4 max. 40 796kHz 4.5 1812 LQH43MN221K03 220 10% 1MHz 110 5.4 max. 40 796kHz 4.5 1812 LQH43MN271J03 270 5% 1MHz 100 6.8 max. 40 796kHz 4 1812 LQH43MN271K03 270 10% 1MHz 100 6.8 max. 40 796kHz 4 1812 LQH43MN331J03 330 5% 1MHz 95 8.2 max. 40 796kHz 3.6 1812 LQH43MN331K03 330 10% 1MHz 95 8.2 max. 40 796kHz 3.6 1812 LQH43MN391J03 390 5% 1MHz 90 9.7 max. 40 796kHz 3.3 1812 LQH43MN391K03 390 10% 1MHz 90 9.7 max. 40 796kHz 3.3 1812 LQH43MN471J03 470 5% 1kHz 80 11.8 max. 40 796kHz 3 1812 LQH43MN471K03 470 10% 1kHz 80 11.8 max. 40 796kHz 3 1812 LQH43MN561J03 560 5% 1kHz 70 14.5 max. 40 796kHz 2.7 1812 LQH43MN561K03 560 10% 1kHz 70 14.5 max. 40 796kHz 2.7 1812 LQH43MN681J03 680 5% 1kHz 65 17.0 max. 40 796kHz 2.5 1812 LQH43MN681K03 680 10% 1kHz 65 17.0 max. 40 796kHz 2.5 1812 LQH43MN821J03 820 5% 1kHz 60 20.5 max. 40 796kHz 2.2 1812 LQH43MN821K03 820 10% 1kHz 60 20.5 max. 40 796kHz 2.2 1812 LQH43MN102J03 1000 5% 1kHz 50 25.0 max. 40 252kHz 2 1812 LQH43MN102K03 1000 10% 1kHz 50 25.0 max. 40 252kHz 2 1812 LQH43MN122J03 1200 5% 1kHz 45 30.0 max. 40 252kHz 1.8 1812 LQH43MN122K03 1200 10% 1kHz 45 30.0 max. 40 252kHz 1.8 1812 LQH43MN152J03 1500 5% 1kHz 40 37.0 max. 40 252kHz 1.6 1812 LQH43MN152K03 1500 10% 1kHz 40 37.0 max. 40 252kHz 1.6 1812 LQH43NN182J03 1800 5% 1kHz 35 45.0 max. 40 252kHz 1.5 1812 LQH43NN182K03 1800 10% 1kHz 35 45.0 max. 40 252kHz 1.5 1812 LQH43NN222J03 2200 5% 1kHz 30 50.0 max. 40 252kHz 1.3 1812 LQH43NN222K03 2200 10% 1kHz 30 50.0 max. 40 252kHz 1.3 1812 Part Number Operating Temp. Range: -25C to +85C Q-Frequency Characteristics Inductance-Current Characteristics 100 5000 2200H 1000H 80 1000H 1000 100H 60 Q 500 10H Inductance (H) 7 Self Resonance Test Frequency Frequency (min.) (MHz) 40 20 390H 100H 100 0 0.1 0.5 1 5 10 50 39H Frequency (MHz) 10H 10 5 10 50 100 Current (mA) 46 500 EIA O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Chip Coils for DC-DC Converter WoundType LQH2MC Series 0.900.05 Features 1. Wound type with 0.95mm low-profile 2. Size: 2.0x1.6mm 3. Rated current: 300mA (4.7 micro H) 4. Wide inductance range: 4.7 to 82 micro H 2.00.2 1.60.2 Applications For DC-DC converter 0.60.2 0.80.2 0.60.2 (in mm) Inductance (H) Rated Current (mA) DC Resistance (ohm) Self Resonance Frequency (min.) (MHz) LQH2MCN4R7M02 4.7 20% 300 0.8 30% 60 LQH2MCN5R6M02 5.6 20% 280 0.9 30% 60 LQH2MCN6R8M02 6.8 20% 255 1.0 30% 55 LQH2MCN8R2M02 8.2 20% 235 1.1 30% 50 LQH2MCN100K02 10 10% 225 1.2 30% 48 LQH2MCN120K02 12 10% 210 1.4 30% 44 LQH2MCN150K02 15 10% 200 1.6 30% 40 LQH2MCN180K02 18 10% 190 1.8 30% 35 LQH2MCN220K02 22 10% 185 2.1 30% 30 LQH2MCN270K02 27 10% 180 2.5 30% 30 LQH2MCN330K02 33 10% 160 2.8 30% 28 LQH2MCN390K02 39 20% 125 4.4 30% 24 LQH2MCN470K02 47 20% 120 5.1 30% 18 LQH2MCN560K02 56 20% 110 5.7 30% 17 LQH2MCN680K02 68 20% 100 6.6 30% 14 LQH2MCN820K02 82 20% 90 7.5 30% 14 Part Number 8 Operating Temp. Range: -40C to +85C Only for reflow soldering. Inductance-Frequency Characteristics Inductance-Current Characteristics 1000 1000 82H Inductance (H) Inductance (H) 47H 100 22H 10H 10 4.7H 100 82H 47H 22H 10 10H 4.7H 1 0.1 1 10 Frequency (MHz) 100 1 10 100 1000 DC Current (mA) 47 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Chip Coils for Choke Monolithic Type LQM21D/LQM21F/LQM31F Series LQM21D Series 0.50.3 Electrode The LQM21D series consists of magnetically shielded chip inductors. It has less than half the DC resistance of our conventional monolithic chip inductors as well as high inductance. t 1.250.2 2.00.2 Features 1. The inductors have very low DC resistance. 2. The series has an inductance range of 1.0 micro H to 47 micro H. 3. Magnetically shielded structure provides excellent crosstalk characteristics. 4. Compact (2.0x1.25mm) and lightweight 5. Outstanding solder heat resistance. Either flow or reflow soldering methods can be employed. Dimension of t Inductance : 1.0 to 10H 0.850.2 Inductance : 22 to 47H 1.250.2 Inductance (H) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Self Resonance Frequency (min.) (MHz) EIA LQM21DN1R0N00 1.0 30% 1 60 0.10 max. 75 0805 LQM21DN2R2N00 2.2 30% 1 40 0.17 max. 50 0805 LQM21DN4R7N00 4.7 30% 1 30 0.30 max. 35 0805 LQM21DN100N00 10 30% 1 15 0.50 max. 24 0805 LQM21DN220N00 22 30% 1 13 0.65 max. 16 0805 LQM21DN470N00 47 30% 1 7 1.20 max. 7.5 0805 Part Number Operating Temp. Range: -40C to +85C Impedance-Frequency Characteristics LQM21D 10000 47H 22H 10H 1000 Impedance () 9 (in mm) 100 4.7H 2.5H 1.0H 10 1 1 10 100 Frequency (MHz) 48 1000 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. LQM21F_00 Series 0.50.3 Electrode The LQM21F series consists of magnetically shielded chip coils based on Murata's technologies of multilayer process and magnetic materials. Excellent direct current characteristics are realized by using magnetic materials which have excellent saturation characteristics. The inductance of LQM21F is four times as large as that of conventional items. t 1.250.2 2.00.2 (in mm) Features Dimension of t 1. LQM21F series is suitable for power line choke because of its excellent direct current characteristics. The series has larger rated current (60mA at 10 micro H) than conventional rated current. 2. Low DC resistance is realized. 3. The crosstalk characteristics are excellent because of the use of magnetically shielded structure. 4. Small size (2.0x1.25mm) and light weight 5. The series has excellent solder heat resistance. Both flow and reflow soldering can be employed. Inductance : 1.0 to 10H 0.850.2 Inductance : 22 to 47H 1.250.2 Inductance (H) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Self Resonance Frequency (min.) (MHz) EIA LQM21FN1R0N00 1.0 30% 1 220 0.20 30% 105 0805 LQM21FN2R2N00 2.2 30% 1 150 0.28 30% 70 0805 LQM21FN4R7N00 4.7 30% 1 80 0.30 30% 25 0805 LQM21FN100N00 10 30% 1 60 0.50 30% 15 0805 LQM21FN220N00 22 30% 1 13 0.35 30% 15 0805 LQM21FN470N00 47 30% 1 7 0.60 30% 7.5 0805 Part Number 9 Operating Temp. Range: -40C to +85C Inductance-Current Characteristics Impedance-Frequency Characteristics LQM21F_00 LQM21F_00 100 100000 47H 22H 10000 47H 22H 10 Impedance () Inductance (H) 10H 4.7H 2.2H 1.0H 10H 1000 100 4.7H 1 2.2H 10 1.0H 1 0.1 1 10 100 DC Current (mA) 1000 1 10 100 1000 Frequency (MHz) 49 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. LQM21F_70 Series 0.50.3 Features Electrode 1.250.2 Rated Current is larger than previous (LQM21F_00) series. Rated Current: 100mA (10 micro H) 1.250.2 2.00.2 (in mm) Inductance (H) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Self Resonance Frequency (min.) (MHz) EIA LQM21FN4R7M70 4.7 20% 1 120 0.35 30% 25 0805 LQM21FN100M70 10 20% 1 100 0.60 30% 15 0805 Part Number Operating Temp. Range: -55C to +125C Inductance-Current Characteristics Impedance-Frequency Characteristics LQM21F_70 LQM21F_70 10000 100 1000 Impedance () Inductance (H) 10H 10 4.7H 1 9 10H 47H 100 10 0.1 10 10 100 DC Current (mA) 50 1000 1 1 10 100 Frequency (MHz) 1000 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. LQM31F Series LQM31F series consists of magnetically shielded chip coils based on Murata's technologies of multilayer process and magnetic materials. Excellent direct current characteristics and low DC resistance are realized by using magnetic materials which have excellent saturation characteristics and high permeability. 1.00.2 0.70.3 1.60.2 3.20.2 Features 1. LQM31F series is suitable for power line choke because of its excellent direct current characteristics and large rated current (70mA at 10 micro H). 2. Low DC resistance is realized. 3. The crosstalk characteristics are excellent because of magnetically shielded structure. 4. Low profile 1.0mm 5. The series has excellent solder heat resistance. Both flow and reflow soldering can be employed. (in mm) Applications Circuits for DC power line choke of telecommunications equipment such as PDAs, Note-PCs, digital cameras, MD and DVD-RAM Part Number LQM31FN100M00 Inductance (H) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Self Resonance Frequency (min.) (MHz) EIA 10 20% 1 70 0.50 max. 20 1206 9 Operating Temp. Range: -40C to +85C Impedance-Frequency Characteristics Inductance-Current Characteristics LQM31F LQM31F 100 10000 Inductance (H) Impedance () 1000 100 10 10 1 1 1 10 100 Frequency (MHz) 1000 1 10 100 DC Current (mA) 51 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Chip Coils for Choke Wound Type LQH31C/LQH32C/LQH43C Series LQH31C Series 2.30.2 1.60.2 Features 1.80.2 LQH31C series consists of miniature chip inductors with low DC resistance, high current capacity, and high impedance characteristics. It is suitable for use as choke coils in DC power supply circuits. High rated current up to 970mA is available. 1.60.2 3.20.3 0.7min. 0.7min. (in mm) 0.7min. Part Number Inductance (H) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Self Resonance Frequency (min.) (MHz) EIA LQH31CNR12M03 0.12 20% 1 970 0.08 40% 250 1206 LQH31CNR22M03 0.22 20% 1 850 0.1 40% 250 1206 LQH31CNR47M03 0.47 20% 1 700 0.15 40% 180 1206 LQH31CN1R0M03 1.0 20% 1 510 0.28 30% 100 1206 LQH31CN2R2M03 2.2 20% 1 430 0.41 30% 50 1206 LQH31CN4R7M03 4.7 20% 1 340 0.65 30% 31 1206 LQH31CN100K03 10 10% 1 230 1.3 30% 20 1206 LQH31CN220K03 22 10% 1 160 3.0 30% 14 1206 LQH31CN470K03 47 10% 1 100 8.0 30% 10 1206 LQH31CN101K03 100 10% 1 80 12 30% 7 1206 Operating Temp. Range: -25C to +85C 10 Impedance-Frequency Characteristics Inductance-Current Characteristics 1000 100 100H 10H 100 10 1.0H 1 Inductance (H) Impedance (k) 100H 0.1 10H 10 0.01 0.01 0.1 1 10 100 1000 Frequency (MHz) 1.0H 1 5 10 50 Current (mA) 52 100 500 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. 2.50.2 2.00.2 LQH32C series consists of miniature chip coils with low DC resistance, high current capacity, and high impedance characteristics. These features are made possible by the development of Murata's innovative automatic wound techniques. 2.50.2 2.50.2 3.20.3 Features (LQH32C_23/_33) 1. Low DC resistance, high rated current and high inductance. Inductance: 0.15 to 560 micro H. 2. The series exhibits low voltage drops and small variations in inductance with respect to temperature rise and DC current level. This makes them excellent for use as power supply line choke coils. 3. The series has excellent solder heat resistance. Both flow and reflow soldering methods can be employed. LQH32C_23/_33 0.90.3 1.30.2 0.90.3 (in mm) LQH32C_23 Series Inductance (H) Test Frequency Rated Current (mA) DC Resistance (ohm) Self Resonance Frequency (min.) (MHz) EIA LQH32CN1R0M23 1.0 20% 1MHz 800 0.09 30% 96 1210 LQH32CN2R2M23 2.2 20% 1MHz 600 0.13 30% 64 1210 LQH32CN4R7M23 4.7 20% 1MHz 450 0.2 30% 43 1210 LQH32CN100K23 10 10% 1MHz 300 0.44 30% 26 1210 LQH32CN220K23 22 10% 1MHz 250 0.71 30% 19 1210 LQH32CN470K23 47 10% 1MHz 170 1.3 30% 15 1210 LQH32CN101K23 100 10% 1MHz 100 3.5 30% 10 1210 LQH32CN221K23 220 10% 1MHz 70 8.4 30% 6.8 1210 LQH32CN331K23 330 10% 1MHz 60 10 30% 5.6 1210 LQH32CN391K23 390 10% 1MHz 60 17 30% 5 1210 LQH32CN471K23 470 10% 1kHz 60 19 30% 5 1210 LQH32CN561K23 560 10% 1kHz 60 22 30% 5 1210 Part Number 10 Operating Temp. Range: -25C to +85C LQH32C_33 Series (Low DC Resistance Type) Part Number Inductance (H) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Self Resonance Frequency (min.) (MHz) EIA LQH32CNR15M33 0.15 20% 1 1450 0.028 30% 400 1210 LQH32CNR27M33 0.27 20% 1 1250 0.034 30% 250 1210 LQH32CNR47M33 0.47 20% 1 1100 0.042 30% 150 1210 LQH32CN1R0M33 1.0 20% 1 1000 0.06 30% 100 1210 LQH32CN2R2M33 2.2 20% 1 790 0.097 30% 64 1210 LQH32CN4R7M33 4.7 20% 1 650 0.15 30% 43 1210 LQH32CN100K33 10 10% 1 450 0.3 30% 26 1210 Operating Temp. Range: -25C to +85C 53 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Impedance-Frequency Characteristics Inductance-Current Characteristics LQH32C_23/_33 LQH32C_23/_33 1000 1000 100 100H 100 10H 10 Inductance (H) Impedance (k) 100H 1.0H 1 10H 10 0.1 1.0H 1 0.01 0.01 0.1 1 10 Frequency (MHz) 10 54 100 1000 0.1 1 10 100 DC Current (mA) 1000 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. LQH32C_53 Series (Low Profile Type) 2.50.2 1.550.15 2.50.2 LQH32C_53 series consists of miniature chip coils with low DC resistance, high current capacity, and high impedance characteristics. These features are made possible by the development of Murata's innovative wound techniques. They are excellent for use as choke coils in DC power supply circuits. The LQH32C_53 series has achieved Max 1.7mm height and high rated current. A A 3.20.3 2.50.2 A : 2.8 max. Features 0.90.3 1.30.2 0.90.3 (in mm) 1. The series has a wide inductance range of 1.0 to 100 micro H. 2. The series exhibit low voltage drops and small variations in inductance with respect to temperature rise and DC current level. This makes them excellent for use as power supply line choke coils. 3. The series has excellent solder heat resistance. Both flow and reflow soldering methods can be employed. Inductance (H) Test Frequency (MHz) Rated Current (mA) DC Resistance (ohm) Self Resonance Frequency (min.) (MHz) EIA LQH32CN1R0M53 1.0 20% 1 1000 0.060 30% 100 1210 LQH32CN2R2M53 2.2 20% 1 790 0.097 30% 64 1210 LQH32CN4R7M53 4.7 20% 1 650 0.15 30% 43 1210 LQH32CN100K53 10 10% 1 450 0.30 30% 26 1210 LQH32CN150K53 15 10% 1 300 0.58 30% 26 1210 LQH32CN220K53 22 10% 1 250 0.71 30% 19 1210 LQH32CN330K53 33 10% 1 200 1.1 30% 17 1210 LQH32CN470K53 47 10% 1 170 1.3 30% 15 1210 LQH32CN680K53 68 10% 1 130 2.2 30% 12 1210 LQH32CN101K53 100 10% 1 100 3.5 30% 10 1210 Part Number 10 Operating Temp. Range: -25C to +85C Impedance-Frequency Characteristics Inductance-Current Characteristics LQH32C_53 LQH32C_53 1000 100 100uH 100uH 100 Inductance (H) Impedance (k) 10 10uH 1 1.0uH 0.1 10uH 10 1.0uH 1 0.01 0.1 0.001 1 10 100 Frequency (MHz) 1000 1 10 100 1000 DC Current (mA) 55 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. LQH43C Series 3.20.2 3.60.2 2.60.2 LQH43C series consists of miniature chip inductors with low DC resistance, high current capacity, and high impedance characteristics. It is suitable for use as choke coils in DC power supply circuits. 3.20.2 4.50.3 Features 1. Various inductance ranges are available. 2. The series exhibits low voltage drops and small change in inductance with respect to temperature rise and DC current level. This makes them excellent to use as power supply line choke coils. 3. Small size 4.5x3.2mm and realized low height 2.8mm max. 4. The series has excellent solder heat resistance. Both flow and reflow soldering methods can be employed. Inductance (H) Test Frequency Rated Current (mA) DC Resistance (ohm) Self Resonance Frequency (min.) (MHz) EIA LQH43CN1R0M03 1.0 20% 1MHz 1080 0.08 max. 100 1812 LQH43CN1R5M03 1.5 20% 1MHz 1000 0.09 max. 85 1812 LQH43CN2R2M03 2.2 20% 1MHz 900 0.11 max. 60 1812 LQH43CN3R3M03 3.3 20% 1MHz 800 0.13 max. 47 1812 LQH43CN4R7M03 4.7 20% 1MHz 750 0.15 max. 35 1812 LQH43CN6R8M03 6.8 20% 1MHz 720 0.20 max. 30 1812 LQH43CN100K03 10 10% 1MHz 650 0.24 max. 23 1812 LQH43CN150K03 15 10% 1MHz 570 0.32 max. 20 1812 LQH43CN220K03 22 10% 1MHz 420 0.6 max. 15 1812 LQH43CN330K03 33 10% 1MHz 310 1.0 max. 12 1812 LQH43CN470K03 47 10% 1MHz 280 1.1 max. 10 1812 LQH43CN680K03 68 10% 1MHz 220 1.7 max. 8.4 1812 LQH43CN101K03 100 10% 1MHz 190 2.2 max. 6.8 1812 LQH43CN151K03 150 10% 1MHz 130 3.5 max. 5.5 1812 LQH43CN221K03 220 10% 1MHz 110 4.0 max. 4.5 1812 LQH43CN331K03 330 10% 1MHz 100 6.8 max. 3.6 1812 LQH43CN471K03 470 10% 1kHz 90 8.5 max. 3.0 1812 Part Number Operating Temp. Range: -25C to +85C Impedance-Frequency Characteristics Inductance-Current Characteristics 1000 1000 100H 100 100H 100 10H Inductance (H) Impedance (k) 10 (in mm) 1.0min. 1.0min. 1.0min. 10 1.0H 1 10H 10 1.0H 1 0.1 0.01 0.01 56 0.1 1 10 Frequency (MHz) 100 1000 0.1 1 10 100 DC Current (mA) 1000 10000 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Chip Coils for Choke Magnetic Shielded Type LQH3KS Series LQH3KS_23 Series 3.30.3 2.1max. Features 1. Low profile dimension (2.1mm max.) and small size of 1212 (3.3x3.3mm) are suitable for portable equipment. 2. The series has low DC Resistance. 3. Large inductance of 560 to 2200 micro H 4. Magnetically shielded structure prevents interference occurring between peripheral components. 3.30.3 0.9 0.3 1.3 0.2 (in mm) 0.9 0.3 Inductance (H) Test Frequency (kHz) Rated Current (mA) DC Resistance (ohm) Self Resonance Frequency (min.) (MHz) EIA LQH3KSN561N23 560 30% 100 50 7.8 30% 3.0 1212 LQH3KSN681N23 680 30% 100 40 9.1 30% 2.6 1212 LQH3KSN102N23 1000 30% 10 30 11 30% 2.1 1212 LQH3KSN152N23 1500 30% 10 25 23 30% 1.7 1212 LQH3KSN222N23 2200 30% 10 20 28 30% 1.5 1212 Part Number Operating Temp. Range: -25C to +85C Only for reflow soldering. Impedance-Frequency Characteristics Inductance-Current Characteristics 1000 10000 2200H 100 1000H 1000H 10 Inductance (H) Impedance (k) 2200H 560H 1 1000 560H 11 100 0.1 0.01 0.01 0.1 1 Frequency (MHz) 10 10 1 10 100 DC Current (mA) 57 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. LQH3KS_53 Series (Low Profile Type) 3.30.3 1.8 max. LQH3KS_53 series is miniature chip inductor with high current capacity and low DC resistance. These features are achieved by Murata's innovative winding technology. 3.30.3 Features 1. Low profile (1.8mm max.) and small size (3.3x3.3mm) 2. The series has large inductance of 3.3 to 820 micro H. 3. Low DC resistance 0.9 0.3 1.3 0.2 (in mm) 0.9 0.3 Inductance (H) Test Frequency Rated Current (mA) DC Resistance (ohm) Self Resonance Frequency (min.) (MHz) EIA LQH3KSN3R3N53 3.3 30% 1MHz 320 0.07 30% 50 1212 LQH3KSN4R7N53 4.7 30% 1MHz 260 0.09 30% 42 1212 LQH3KSN6R8N53 6.8 30% 1MHz 210 0.10 30% 35 1212 LQH3KSN100M53 10 20% 1MHz 180 0.17 30% 28 1212 LQH3KSN220M53 22 20% 1MHz 120 0.40 30% 19 1212 Part Number LQH3KSN330M53 33 20% 1MHz 100 0.50 30% 16 1212 LQH3KSN471M53 470 20% 100kHz 30 6.90 30% 4.2 1212 LQH3KSN561M53 560 20% 100kHz 30 7.60 30% 3.8 1212 LQH3KSN821M53 820 20% 100kHz 20 15.5 30% 3.2 1212 Operating Temp. Range: -25C to +85C Only for reflow soldering. Impedance-Frequency Characteristics Inductance-Current Characteristics 1000 10000 820H 100 11 1000 Inductance (H) Impedance (k) 470H 10 33H 1 10H 0.1 820H 470H 100 33H 10 10H 4.7H 4.7H 0.01 1 10 100 Frequency (MHz) 58 1000 1 1 10 100 DC Current (mA) 1000 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Chip Coils for Choke Wound/Magnetic Shielded Type LQH55D/LQH66S Series LQH55D Series 5.00.3 5.00.3 4.70.3 LQH55D series are winding type coils for choke by using high performance thick wire wound technology. Features 1. Low direct current resistance, large current capacity and large inductance 2. For DC-DC converters and DC power supply circuits 5.70.3 EIA Code:2220 1.3 min. 1.7 min. 1.3 min. (in mm) Part Number Inductance (H) Test Frequency Rated Current (mA) DC Resistance (ohm) Self Resonance Frequency (min.) (MHz) EIA LQH55DNR12M03 0.12 20% 1MHz 6000 0.007 40% 450 2220 LQH55DNR27M03 0.27 20% 1MHz 5300 0.010 40% 300 2220 LQH55DNR47M03 0.47 20% 1MHz 4800 0.013 40% 200 2220 LQH55DN1R0M03 1.0 20% 1MHz 4000 0.019 40% 150 2220 LQH55DN1R5M03 1.5 20% 1MHz 3700 0.022 40% 110 2220 LQH55DN2R2M03 2.2 20% 1MHz 3200 0.029 40% 80 2220 LQH55DN3R3M03 3.3 20% 1MHz 2900 0.036 40% 40 2220 LQH55DN4R7M03 4.7 20% 1MHz 2700 0.041 40% 30 2220 LQH55DN6R8M03 6.8 20% 1MHz 2000 0.074 40% 25 2220 LQH55DN100M03 10 20% 1MHz 1700 0.093 40% 20 2220 LQH55DN150M03 15 20% 1MHz 1400 0.15 40% 17 2220 LQH55DN220M03 22 20% 1MHz 1200 0.19 40% 15 2220 LQH55DN330M03 33 20% 1MHz 900 0.32 40% 12 2220 LQH55DN470M03 47 20% 1MHz 800 0.40 40% 10 2220 LQH55DN680M03 68 20% 1MHz 640 0.67 40% 7.6 2220 LQH55DN101M03 100 20% 100kHz 560 0.86 40% 6.5 2220 LQH55DN151M03 150 20% 100kHz 420 1.9 40% 5.0 2220 LQH55DN221M03 220 20% 100kHz 320 2.4 40% 4.0 2220 LQH55DN331M03 330 20% 100kHz 270 4.4 40% 3.1 2220 LQH55DN471M03 470 20% 100kHz 240 5.4 40% 2.4 2220 LQH55DN681M03 680 20% 100kHz 190 8.1 40% 1.9 2220 LQH55DN102M03 1000 20% 10kHz 150 10.3 40% 1.7 2220 LQH55DN222M03 2200 20% 10kHz 100 21.5 40% 1.2 2220 LQH55DN472M03 4700 20% 10kHz 70 43.6 40% 0.8 2220 LQH55DN103M03 10000 20% 10kHz 50 100 40% 0.5 2220 12 Operating Temp. Range: -25C to +80C Only for reflow soldering. 59 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Impedance-Frequency Characteristics Inductance-Current Characteristics 1000000 10000H 10000 1000H 1000 1000H 1000 100H 100 10H 1H 10 Inductance (H) Impedance () 10000H 10000 100000 1 0.01 0.1 1 10 100 1000 Frequency (MHz) 100H 100 10H 10 1H 1 0.01 0.1 1 10 DC Current (A) LQH66S Series 6.30.3 6.30.3 4.70.3 LQH66S series are magnetic shielded type coils for choke by using high performance thick wire wound technology. 6.30.3 Features 1. Low direct current resistance, large current capacity and large inductance 2. High density mounting 3. For DC-DC converters and DC power supply circuits EIA Code:2525 1.3 min. 12 1.7 min. 1.3 min. (in mm) Part Number Inductance (H) Test Frequency Rated Current (mA) DC Resistance (ohm) Self Resonance Frequency (min.) (MHz) EIA LQH66SNR27M03 0.27 20% 1MHz 6000 0.007 40% 300 2525 LQH66SNR68M03 0.68 20% 1MHz 5300 0.010 40% 180 2525 LQH66SN1R0M03 1.0 20% 1MHz 4700 0.013 40% 150 2525 LQH66SN1R5M03 1.5 20% 1MHz 3800 0.016 40% 110 2525 LQH66SN2R2M03 2.2 20% 1MHz 3300 0.019 40% 80 2525 LQH66SN3R3M03 3.3 20% 1MHz 2600 0.022 40% 40 2525 LQH66SN4R7M03 4.7 20% 1MHz 2200 0.025 40% 30 2525 LQH66SN6R8M03 6.8 20% 1MHz 1800 0.029 40% 25 2525 LQH66SN100M03 10 20% 1MHz 1600 0.036 40% 20 2525 LQH66SN150M03 15 20% 1MHz 1300 0.069 40% 17 2525 LQH66SN220M03 22 20% 1MHz 1100 0.087 40% 15 2525 LQH66SN330M03 33 20% 1MHz 860 0.14 40% 12 2525 LQH66SN470M03 47 20% 1MHz 760 0.17 40% 10 2525 LQH66SN680M03 68 20% 1MHz 600 0.29 40% 7.6 2525 LQH66SN101M03 100 20% 100kHz 520 0.36 40% 6.5 2525 LQH66SN151M03 150 20% 100kHz 420 0.63 40% 5.0 2525 LQH66SN221M03 220 20% 100kHz 350 0.79 40% 4.0 2525 LQH66SN331M03 330 20% 100kHz 280 1.8 40% 3.2 2525 LQH66SN471M03 470 20% 100kHz 240 2.2 40% 2.5 2525 LQH66SN681M03 680 20% 100kHz 200 3.9 40% 2.0 2525 LQH66SN102M03 1000 20% 10kHz 160 4.9 40% 1.7 2525 LQH66SN222M03 2200 20% 10kHz 100 9.4 40% 1.2 2525 LQH66SN472M03 4700 20% 10kHz 70 19.5 40% 0.8 2525 LQH66SN103M03 10000 20% 10kHz 50 39.7 40% 0.5 2525 Operating Temp. Range: -25C to +80C 60 Only for reflow soldering. O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Impedance-Frequency Characteristics Inductance-Current Characteristics 1000000 10000 10000H 10000H 10000 1000H 1000 1000 100H 100 1000H 10H 1H 10 1 0.01 0.1 1 10 Frequency (MHz) 100 1000 Inductance (H) Impedance () 100000 100 10 1 100H 10H 1H 0.01 0.1 1 10 DC Current (A) 12 61 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please O05E13.pdf 05.3.4 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. !Caution/Notice !Caution (Rating) Do not use products beyond the rated current as this may create excessive heat. Notice (Storage and Operating Condition) <Operating Environment> Do not use products in chemical atmosphere such as chlorine gas, acid or sulfide gas. <Storage Requirements> 1. Storage Period LQG/LQM series should be used within 6 months; the other products should be used within 12 months. Check solderability if this period is exceeded. 2. Storage conditions (1) Store products in a warehouse in compliance with the following conditions: Temperature: -10 to 40 degree C. Humidity: 30 to 70% (relative humidity) Do not subject products to rapid changes in temperature and humidity. 12 62 Do not store them in chemical atmosphere such as one containing sulfurous acid gas or alkaline gas. This will prevent electrode oxidation which causes poor solderability and possible corrosion of coils. (2) Do not store products in bulk packaging to prevent collision among coils which causes core chipping and wire breakage. (3) Store products on pallets to protect from humidity, dust, etc. (4) Avoid heat shock, vibration, direct sunlight, etc. O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. !Caution/Notice Notice (Soldering and Mounting) 1. Standard Land Dimensions A high Q value is achieved when the PCB electrode land pattern is designed so that it does not project beyond the chip coil electrode. Land Pattern Solder Resist (in mm) Series Standard Land Dimensions LQG15H LQG18H LQM18N LQM21N/21D/21F LQM31F LQP03T LQP15M/15T LQP18M LQH2MC LQW15A LQW18A LQW2BH LQW31H LQH31M/31C/31H Part Number LQG15H LQG18H a b c 0.5-0.6 1.4-1.5 0.4 0.6-0.8 1.8-2.2 0.6-0.8 Flow a LQM18N c b Reflow 0.7 2.2-2.6 1.8-2.0 0.7 LQM21N/21D/21F 1.0 3.0-4.0 LQM31F 1.2 4.2-5.2 2.0 LQP03T 0.2-0.3 0.8-0.9 0.2-0.3 LQP15M/15T 0.5-0.6 1.4-1.5 0.4 LQP18M 0.7-0.9 1.8-2.2 0.6-0.8 LQH2MC 1.0 2.6 0.8 1.5 4.5 1.0 LQH31M/31C/31H LQW31H 1.2 LQW2BH 1.2 3.0 0.8 LQW18A 0.7-1.0 1.8-2.0 0.6-0.8 LQW15A 0.65 1.2 0.50 5.5 2.0 1.0 LQH32M LQH32C LQH3KS 1.0 1.3 1.0 LQH43M LQH43N LQH43C 3.0 1.5 7.5 1.5 1.5 1.5 LQH55D LQH66S 12 3.5 8.0 3.0 2.0 3.0 Attention should be paid to potential magnetic coupling effects when using the coil as a resonator. Continued on the following page. 63 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. !Caution/Notice Continued from the preceding page. 2. Standard Soldering Conditions (1) Soldering method Chip coils can be flow or reflow soldered. Please contact Murata regarding other soldering methods. As for LQG, LQP, LQW15A/18A, LQH2MC/3KS/55D/66S series, please use reflow soldering. Solder: Use H60A, H63A (JIS Z 3282) or equivalent. Use solder paste equivalent to H60A for LQP03T/15M/15T/18M and LQG15H/18H. In case of Lead-free solder, use Sn-3.0Ag-0.5Cu solder. Flux: Use rosin-based flux, but not strongly acidic flux (with chlorine content exceeding 0.2wt%). Do not use water-soluble flux. The flux used for LQW15/18 series should use the rosin-based flux that includes middle activator equivalent to 0.06wt% to 0.1wt% chlorine. For additional mounting methods, please contact Murata. (2) Soldering profile Temperature (C) oFlow Soldering profile (Eutectic solder, Sn-3.0Ag-0.5Cu solder) T3 T2 t2 Heating T1 Limit Profile Standard Profile Pre-heating t1 Series 12 time (s) Standard Profile Pre-heating Heating Limit Profile Heating Temp. (T1) Time. (t1) Temp. (T2) Time. (t2) Cycle of flow Temp. (T3) Time. (t2) Cycle of flow LQM18N LQM21N/21D/21F LQM31F LQW2BH/31H LQH31C/31H/31M 150C 60s min. 250C 4 to 6s 2 times 2653C 5s max. 2 times LQH32C/32M LQH43C/43M(N) 150C 60s min. 250C 4 to 6s 2 times 2653C 5s max. 1 times Continued on the following page. 64 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. !Caution/Notice Continued from the preceding page. oReflow Soldering profile qSoldering profile for Lead-free solder (Sn-3Ag-0.5Cu) Temperature (C) T4 T2 T1 T3 180 150 Limit Profile Pre-heating t1 Standard Profile t2 9030s time (s) Standard Profile Limit Profile Time. (t2) Peak temperature (T4) Cycle of reflow Temp. (T1) Time. (t1) Peak temperature (T2) LQG15H/18H LQW15A/18A LQP03T/15M/15T/18M LQW2BH/31H LQM18N LQM21N/21D/21F LQM31F, LQH2MC LQH31C/31H/31M 220C 30 to 60s 2453C 2 times 230C 60s max. 260C/10s 2 times LQH32C/32M LQH43C/43M(N) LQH55D, LQH66S LQH3KS 220C 30 to 60s 2453C 2 times 230C 60s max. 260C/10s 1 times Series Heating Heating Cycle of reflow Temp. (T3) wSoldering profile for Eutectic solder (Limit profile: refer to q) Temperature (C) T3 T2 T1 t2 t1 Series time (s) Standard Profile Pre-heating Heating Temp. (T1) LQG15H/18H LQW15A/18A LQP03T/15T/15M/18M LQW2BH/31H LQH31H, LQM18N LQM21N/21D/21F LQM31F, LQH2MC LQH31C, LQH32C LQH31M, LQH32M LQH43C, LQH43M(N) LQH3KS, LQH55D LQH66S Standard Profile Time. (t1) Temp. (T2) Time. (t2) Peak temperature (T3) Cycle of reflow 12 150C 60s min. 183C 60s max. 230C 2 times Continued on the following page. 65 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. !Caution/Notice Continued from the preceding page. (3) Reworking with Soldering Iron Preheating at 150C for 1 minute is required. Do not directly touch the ceramic element with the tip of the soldering iron. The reworking soldering conditions are as follows: Soldering iron power output: 30W max. Temperature of soldering iron tip: 280C Diameter of soldering iron end: 3.0mm max. Soldering time: within 3 s 3. Mounting Instructions (1) Land Pattern Dimensions Large lands reduce Q of the mounted chip. Also, large protruding land areas (bordered by lines having dimensions 'c' and 'd' shown) cause floating and electrode leaching. Solder Resist Land c d (2) Magnetic Coupling Since some chip coils are constructed like an open magnetic circuit, narrow spacing between coils may cause magnetic coupling. The LQG, LQM and LQH3KS/66S series have a magnetically shielded structure. The structure makes their coupling coefficient smaller than that of conventional chip coils. Magnetic Coupling (3) PCB Warping PCB should be designed so that products are not subjected to the mechanical stress caused by warping the board. Products should be located in the sideways direction (Length: a<b) to the mechanical stress. 12 (4) Amount of Solder Paste Excessive solder causes electrode corrosion, while insufficient solder causes low electrode bonding strength. Adjust the amount of solder paste as shown on the right so that solder is applied. o Standard thickness of solder paste LQP/LQG/LQM/LQW_A: 100 to 150m LQH/LQW_H: 200 to 300m (LQH2MC: 100 to 150m) a b Poor example LQH_C/D/H/M/N LQW_H LQP/LQG/LQM Good example LQH_S LQW_A Continued on the following page. 66 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. !Caution/Notice Continued from the preceding page. (5) Amount of Adhesive If too much adhesive is applied, then it may overflow into the land or termination areas and yield poor solderability. In contrast, if insufficient adhesive is applied, or if the adhesive is not sufficiently hardened, then the chip may become detached during flow soldering. Apply the adhesive in accordance with the following conditions: LQH_C/H/M/N LQW_H Part Number Typical Application Amount (in:mg) MR-8153RA NF-3000 LQM18N 0.05-0.06 0.06-0.07 LQM21N/21D/21F 0.15-0.20 0.20-0.25 LQM31F 0.20-0.25 0.25-0.30 LQW2BH 0.116-0.18 - 0.18-0.20 0.20-0.25 0.20-0.23 0.27-0.35 0.45-0.50 0.60-0.80 LQH31M/31C/31H LQW31H LQH32M/32C LQH43M(N) LQH43C 4. Cleaning The following conditions should be observed when cleaning chip coils: (1) Cleaning Temperature: 60C max. (40C max. for alcohol cleaning agents) (2) Ultrasonic Output: 20W/l max. Duration: 5 minutes max. Frequency: 28 to 40kHz Care should be taken not to cause resonance of the PCB and mounted products. (3) Cleaning agent The following cleaning agents have been tested on LQP/LQG/LQM individual components. Evaluation in complete assembly should be done prior to production. (a) Alcohol cleaning agents Isopropyl alcohol (IPA) (b) Aqueous cleaning agents Pine Alpha ST-100S LQH_S series: Aqueous agents should not be used because they may cause quality deterioration. (4) Ensure that flux residue is completely removed. Component should be thoroughly dried after aqueous agents have been removed with deionized water. For additional cleaning methods, please contact Murata. 12 67 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. !Caution/Notice Notice (Handling) LQM series * There is the possibility that magnetism may change the inductance value. Do not use a magnet or tweezers with magnetism when handling chip coils. (The tip of the tweezers should be molded with resin or pottery.) <Handling> 1. Avoid applying excessive stress to products to prevent damage. 2. Do not touch winding with sharp objects such as tweezers to prevent wire breakage. 3. Do not apply excessive force to products mounted on boards to prevent core breakage. <Transportations> Do not apply excessive vibration or mechanical shock to products. <Resin Coating> When coating products with resin, the relatively high resin curing stress may change inductance values. For exterior coating, select resin carefully so that electrical and mechanical performance of the product is not affected. This item is designed to have sufficient strength, but handle with care to avoid chipping or breaking its ceramic structure. LQW_A series * To prevent breaking the wire, avoid touching sharp material, such as tweezers, to the winding portion. * To prevent breaking the core, avoid applying excessive mechanical shock to products mounted on the board. * In some mounting machines, when picking up components, support pin pushes up the components from the bottom of base tape. In this case, please remove the support pin. The support pin may damage the components and break wire. LQH_C/D/H/M/N, LQW_H series * To prevent breaking the wire, avoid touching sharp material, such as tweezers, to the winding portion. * To prevent breaking the core, avoid applying excessive mechanical shock to products mounted on the board. LQP series * The pattern of the chip coil is covered with protective film. Take care to avoid damaging the chip coil when handling it with pick-up nozzles, sharp instruments, etc. Notice (Measuring Method) Measuring Method of Inductance/Q 1. Residual elements and stray elements of test fixture can be described by F-parameter shown in following. I1 B V2 V1 C Test Head Zx = I2 A Zm 3. Thus, the relation between Zx and Zm is following; Zx D Test fixture V1 I1 = A B V2 C D I2 Zm = *Residual impedance of short chip Product V1 I1 , Zx = where, = D / A = 1 = B / D = Zsm - (1 - Yom Zsm) Zss = C / A = Yom Zsm: measured impedance of short chip Zss: residual impedance of short chip* Yom: measured admittance when opening the fixture Residual Impedance Series 0nH LQG15HS 2. The impedance of chip coil Zx and measured value Zm can be described by input/output current/voltage. 12 Zm - 1 - Zm 0.430nH LQP03T V2 0.556nH LQG15HN, LQW15A, LQP15T/M I2 0.771nH LQG18H, LQP18M, LQW18A 4. Lx and Qx shall be calculated with the following equation. Lx = 68 Im (Zx) 2f , Qx = Im (Zx) Re (Zx) Lx: Inductance of chip coil Qx: Q of chip coil f: Measuring frequency O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Packaging 2.00.05 2.00.05 4.00.1 a LQG15H, LQP15M/18M LQP03T/15T, LQW15A c c 8.00.2 b 3.50.05 o1.5 +0.1 -0 1.750.1 Minimum Quantity and 8mm Width Taping Dimension Direction of feed Paper Tape Dimensions (in mm) Part Number a b LQG15H 0.62 1.12 0.8 max. LQP03T 0.38 0.68 0.55 max. LQP15T 0.62 1.12 LQP15M 0.70 1.20 LQP18M 1.19 2.0 LQW15A_00 0.64/0.66 0.69 0.66 LQW15A_10 c Minimum Qty. (pcs.) o180mm reel o330mm reel Bulk 1000 50000 10000 50000 0.8 max. 1.18 4000 10000 10000 - 500 0.69 (1.5-2.7nH, 3.9-4.7nH, 5.8-6.8nH, 8.2-9.5nH, 11nH, 12nH, 15nH) 0.66 (2.9nH, 5.1nH, 7.3nH, 7.5nH, 10nH, 13nH, 16-23nH, 100nH, 120nH) 0.64 (24-91nH) a 4.00.1 2.00.05 1.750.1 b 1 0.2 8.00.3 (2.75) 3.50.05 4.00.1 <Paper> , , <Plastic> o1.5 +0.1 -0 c c Direction of feed LQW2BH 1 : 0.3 Paper Tape Part Number Dimensions (in mm) a b 1.45 2.25 c Minimum Qty. (pcs.) o180mm reel o330mm reel Bulk LQM21N (0.1-2.2H) LQM21D (1-10H) LQM21F (1-2.2H) LQG18H 1.05 1.85 LQW18A_00 1.0 1.8 LQW18A_10 1.1 1.9 LQM18N 1.1 max. 1000 4000 10000 12 500 Plastic Tape Part Number Dimensions (in mm) a b c 1.45 2.25 1.3 LQM31F 1.9 3.5 1.3 LQH31M/31C/31H, LQW31H 1.9 3.6 LQW2BH 1.75 2.3 2.9 3.6 1.9 2.3 Minimum Qty. (pcs.) o180mm reel o330mm reel Bulk LQM21N (2.7-4.7H) LQM21D (22-47H) LQM21F (4.7-47H) LQH32M, LQH32C_33/_23 LQH32C_53 LQH2MC 3000 10000 1000 2000 7500 - 3000 - - 2.0 2.1 1.7 1.05 (in mm) Continued on the following page. 69 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Packaging Continued from the preceding page. d 12.00.3 o1.5 +0.1 -0 5.50.1 1.750.1 2.00.1 4.00.1 (4.75) b 8.00.1 ,,, Minimum Quantity and 12mm Width Plastic Taping Dimension a c Direction of feed Plastic Tape Part Number LQH3KS LQH43M(N) Dimensions (in mm) a b c 3.9 3.7 1.9 3.6 4.9 2.7 LQH55D 5.4 6.1 5.0 LQH66S 6.7 6.7 5.6 LQH43C Minimum Qty. (pcs.) d o180mm reel o330mm reel 1000 0.3 0.4 500 350 4000 2500 1500 (in mm) 12 70 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Design Kits oEKLMQG15A (High-frequency Monolithic Type) No. Part Number Inductance Quantity (pcs.) Nominal Tolerance Q min. DC Resistance () max. Rated Current (mA) 1 LQG15HN1N0S02 20 1.0nH 0.3nH 8 0.10 300 2 LQG15HN1N1S02 20 1.1nH 0.3nH 8 0.10 300 3 LQG15HN1N2S02 20 1.2nH 0.3nH 8 0.10 300 4 LQG15HN1N3S02 20 1.3nH 0.3nH 8 0.10 300 5 LQG15HN1N5S02 20 1.5nH 0.3nH 8 0.10 300 6 LQG15HN1N6S02 20 1.6nH 0.3nH 8 0.10 300 7 LQG15HN1N8S02 20 1.8nH 0.3nH 8 0.10 300 8 LQG15HN2N0S02 20 2.0nH 0.3nH 8 0.12 300 2.2nH 0.3nH 8 0.15 300 9 LQG15HN2N2S02 20 10 LQG15HN2N4S02 20 2.4nH 0.3nH 8 0.16 300 11 LQG15HN2N7S02 20 2.7nH 0.3nH 8 0.17 300 12 LQG15HN3N0S02 20 3.0nH 0.3nH 8 0.18 300 13 LQG15HN3N3S02 20 3.3nH 0.3nH 8 0.19 300 14 LQG15HN3N6S02 20 3.6nH 0.3nH 8 0.19 300 15 LQG15HN3N9S02 20 3.9nH 0.3nH 8 0.19 300 16 LQG15HN4N3S02 20 4.3nH 0.3nH 8 0.21 300 17 LQG15HN4N7S02 20 4.7nH 0.3nH 8 0.23 300 18 LQG15HN5N1S02 20 5.1nH 0.3nH 8 0.24 300 19 LQG15HN5N6S02 20 5.6nH 0.3nH 8 0.26 300 20 LQG15HN6N2S02 20 6.2nH 0.3nH 8 0.27 300 21 LQG15HN6N8J02 20 6.8nH 5% 8 0.29 300 22 LQG15HN7N5J02 20 7.5nH 5% 8 0.31 300 23 LQG15HN8N2J02 20 8.2nH 5% 8 0.33 300 24 LQG15HN9N1J02 20 9.1nH 5% 8 0.34 300 25 LQG15HN10NJ02 20 10nH 5% 8 0.35 300 26 LQG15HN12NJ02 20 12nH 5% 8 0.41 300 27 LQG15HN15NJ02 20 15nH 5% 8 0.46 300 28 LQG15HN18NJ02 20 18nH 5% 8 0.51 300 29 LQG15HN22NJ02 20 22nH 5% 8 0.58 300 30 LQG15HN27NJ02 20 27nH 5% 8 0.67 300 31 LQG15HN33NJ02 20 33nH 5% 8 0.67 200 32 LQG15HN39NJ02 20 39nH 5% 8 1.06 200 33 LQG15HN47NJ02 20 47nH 5% 8 1.15 200 34 LQG15HN56NJ02 20 56nH 5% 8 1.20 200 35 LQG15HN68NJ02 20 68nH 5% 8 1.25 180 36 LQG15HN82NJ02 20 82nH 5% 8 1.60 150 37 LQG15HNR10J02 20 100nH 5% 8 1.60 150 38 LQG15HNR12J02 20 120nH 5% 8 1.60 150 12 Continued on the following page. 1 71 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Design Kits Continued from the preceding page. oEKLMQ15SB (High-frequency Monolithic Type) No. 12 Part Number Inductance Quantity (pcs.) Nominal Tolerance Q min. DC Resistance () max. Rated Current (mA) 1 LQG15HS1N0S02 20 1.0nH 0.3nH 8 0.07 300 2 LQG15HS1N1S02 20 1.1nH 0.3nH 8 0.09 300 3 LQG15HS1N2S02 20 1.2nH 0.3nH 8 0.09 300 4 LQG15HS1N3S02 20 1.3nH 0.3nH 8 0.09 300 5 LQG15HS1N5S02 20 1.5nH 0.3nH 8 0.10 300 6 LQG15HS1N6S02 20 1.6nH 0.3nH 8 0.10 300 7 LQG15HS1N8S02 20 1.8nH 0.3nH 8 0.10 300 8 LQG15HS2N0S02 20 2.0nH 0.3nH 8 0.10 300 9 LQG15HS2N2S02 20 2.2nH 0.3nH 8 0.12 300 10 LQG15HS2N4S02 20 2.4nH 0.3nH 8 0.15 300 11 LQG15HS2N7S02 20 2.7nH 0.3nH 8 0.15 300 12 LQG15HS3N0S02 20 3.0nH 0.3nH 8 0.17 300 13 LQG15HS3N3S02 20 3.3nH 0.3nH 8 0.17 300 14 LQG15HS3N6S02 20 3.6nH 0.3nH 8 0.18 300 15 LQG15HS3N9S02 20 3.9nH 0.3nH 8 0.18 300 16 LQG15HS4N3S02 20 4.3nH 0.3nH 8 0.18 300 17 LQG15HS4N7S02 20 4.7nH 0.3nH 8 0.18 300 18 LQG15HS5N1S02 20 5.1nH 0.3nH 8 0.20 300 19 LQG15HS5N6S02 20 5.6nH 0.3nH 8 0.20 300 20 LQG15HS6N2S02 20 6.2nH 0.3nH 8 0.22 300 21 LQG15HS6N8J02 20 6.8nH 5% 8 0.24 300 22 LQG15HS7N5J02 20 7.5nH 5% 8 0.24 300 23 LQG15HS8N2J02 20 8.2nH 5% 8 0.24 300 24 LQG15HS9N1J02 20 9.1nH 5% 8 0.26 300 25 LQG15HS10NJ02 20 10nH 5% 8 0.26 300 26 LQG15HS12NJ02 20 12nH 5% 8 0.28 300 27 LQG15HS15NJ02 20 15nH 5% 8 0.32 300 28 LQG15HS18NJ02 20 18nH 5% 8 0.36 300 29 LQG15HS22NJ02 20 22nH 5% 8 0.42 300 30 LQG15HS27NJ02 20 27nH 5% 8 0.46 300 31 LQG15HS33NJ02 20 33nH 5% 8 0.58 200 32 LQG15HS39NJ02 20 39nH 5% 8 0.65 200 33 LQG15HS47NJ02 20 47nH 5% 8 0.72 200 34 LQG15HS56NJ02 20 56nH 5% 8 0.82 200 35 LQG15HS68NJ02 20 68nH 5% 8 0.92 180 36 LQG15HS82NJ02 20 82nH 5% 8 1.20 150 37 LQG15HSR10J02 20 100nH 5% 8 1.25 150 38 LQG15HSR12J02 20 120nH 5% 8 1.30 150 39 LQG15HSR15J02 20 150nH 5% 8 2.99 140 40 LQG15HSR18J02 20 180nH 5% 8 3.38 130 41 LQG15HSR22J02 20 220nH 5% 8 3.77 120 42 LQG15HSR27J02 20 270nH 5% 8 4.94 110 Rated Current (mA) oEKLMQG18A (High-frequency Monolithic Type) No. Part Number Inductance Quantity (pcs.) Nominal Tolerance Q min. DC Resistance () max. 1 LQG18HN1N2S00 20 1.2nH 0.3nH 12 0.10 300 2 LQG18HN1N5S00 20 1.5nH 0.3nH 12 0.10 300 3 LQG18HN1N8S00 20 1.8nH 0.3nH 12 0.10 300 4 LQG18HN2N2S00 20 2.2nH 0.3nH 12 0.10 300 Continued on the following page. 2 72 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Design Kits Continued from the preceding page. Inductance Quantity (pcs.) Nominal Tolerance Q min. DC Resistance () max. Rated Current (mA) LQG18HN2N7S00 20 2.7nH 0.3nH 12 0.15 300 6 LQG18HN3N3S00 20 3.3nH 0.3nH 12 0.15 300 7 LQG18HN3N9S00 20 3.9nH 0.3nH 12 0.15 300 8 LQG18HN4N7S00 20 4.7nH 0.3nH 12 0.20 300 9 LQG18HN5N6S00 20 5.6nH 0.3nH 12 0.20 300 10 LQG18HN6N8J00 20 6.8nH 5% 12 0.25 300 11 LQG18HN8N2J00 20 8.2nH 5% 12 0.25 300 12 LQG18HN10NJ00 20 10nH 5% 12 0.30 300 13 LQG18HN12NJ00 20 12nH 5% 12 0.35 300 14 LQG18HN15NJ00 20 15nH 5% 12 0.40 300 15 LQG18HN18NJ00 20 18nH 5% 12 0.45 300 16 LQG18HN22NJ00 20 22nH 5% 12 0.50 300 17 LQG18HN27NJ00 20 27nH 5% 12 0.55 300 18 LQG18HN33NJ00 20 33nH 5% 12 0.60 300 19 LQG18HN39NJ00 20 39nH 5% 12 0.65 300 20 LQG18HN47NJ00 20 47nH 5% 12 0.70 300 21 LQG18HN56NJ00 20 56nH 5% 12 0.75 300 22 LQG18HN68NJ00 20 68nH 5% 12 0.80 300 23 LQG18HN82NJ00 20 82nH 5% 12 0.85 300 24 LQG18HNR10J00 20 100nH 5% 12 0.90 300 Tolerance Q min. DC Resistance () max. Rated Current (mA) No. 5 Part Number oEKLMQP03D (High-frequency Film Type) No. Part Number Inductance Quantity (pcs.) Nominal 1 LQP03TN0N6B00 20 0.6nH 0.1nH 11 0.08 420 2 LQP03TN0N7B00 20 0.7nH 0.1nH 11 0.09 410 3 LQP03TN0N8B00 20 0.8nH 0.1nH 11 0.09 410 4 LQP03TN0N9B00 20 0.9nH 0.1nH 11 0.09 410 5 LQP03TN1N0B00 20 1.0nH 0.1nH 11 0.10 400 6 LQP03TN1N1B00 20 1.1nH 0.1nH 11 0.13 280 7 LQP03TN1N2B00 20 1.2nH 0.1nH 11 0.13 280 8 LQP03TN1N3B00 20 1.3nH 0.1nH 11 0.16 280 9 LQP03TN1N5B00 20 1.5nH 0.1nH 11 0.16 280 10 LQP03TN1N6B00 20 1.6nH 0.1nH 11 0.16 280 11 LQP03TN1N8B00 20 1.8nH 0.1nH 11 0.16 280 12 LQP03TN2N0B00 20 2.0nH 0.1nH 11 0.18 220 13 LQP03TN2N2B00 20 2.2nH 0.1nH 11 0.18 220 14 LQP03TN2N4B00 20 2.4nH 0.1nH 11 0.21 220 15 LQP03TN2N7B00 20 2.7nH 0.1nH 11 0.21 220 16 LQP03TN3N0B00 20 3.0nH 0.1nH 11 0.30 190 17 LQP03TN3N3B00 20 3.3nH 0.1nH 11 0.30 190 18 LQP03TN3N6B00 20 3.6nH 0.1nH 11 0.45 170 19 LQP03TN3N9B00 20 3.9nH 0.1nH 11 0.45 170 20 LQP03TN4N3H00 20 4.3nH 3% 11 0.55 160 21 LQP03TN4N7H00 20 4.7nH 3% 11 0.55 160 22 LQP03TN5N1H00 20 5.1nH 3% 11 0.68 140 23 LQP03TN5N6H00 20 5.6nH 3% 11 0.68 140 24 LQP03TN6N2H00 20 6.2nH 3% 11 0.75 130 25 LQP03TN6N8H00 20 6.8nH 3% 11 0.75 130 26 LQP03TN7N5H00 20 7.5nH 3% 11 0.86 110 27 LQP03TN8N2H00 20 8.2nH 3% 11 0.86 110 28 LQP03TN9N1H00 20 9.1nH 3% 11 1.10 100 12 Continued on the following page. 3 73 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Design Kits Kits Design Continued from the preceding page. Inductance Quantity (pcs.) Nominal Tolerance Q min. DC Resistance () max. Rated Current (mA) LQP03TN10NH00 20 10nH 3% 11 1.10 100 LQP03TN12NH00 20 12nH 3% 11 1.25 90 31 LQP03TN15NH00 20 15nH 3% 11 1.50 90 32 LQP03TN18NH00 20 18nH 3% 11 2.00 80 33 LQP03TN22NH00 20 22nH 3% 11 2.60 70 34 LQP03TN27NH00 20 27nH 3% 11 3.10 70 Tolerance Q min. DC Resistance () max. Rated Current (mA) No. Part Number 29 30 oEKLMQP15A (High-frequency Film Type) No. 12 Part Number Inductance Quantity (pcs.) Nominal 1 LQP15MN1N0B02 20 1.0nH 0.1nH 13 0.1 400 2 LQP15MN1N1B02 20 1.1nH 0.1nH 13 0.1 390 3 LQP15MN1N2B02 20 1.2nH 0.1nH 13 0.1 390 4 LQP15MN1N3B02 20 1.3nH 0.1nH 13 0.2 280 5 LQP15MN1N5B02 20 1.5nH 0.1nH 13 0.2 280 6 LQP15MN1N6B02 20 1.6nH 0.1nH 13 0.3 220 7 LQP15MN1N8B02 20 1.8nH 0.1nH 13 0.2 280 8 LQP15MN2N0B02 20 2.0nH 0.1nH 13 0.3 220 9 LQP15MN2N2B02 20 2.2nH 0.1nH 13 0.3 220 10 LQP15MN2N4B02 20 2.4nH 0.1nH 13 0.3 220 11 LQP15MN2N7B02 20 2.7nH 0.1nH 13 0.3 220 12 LQP15MN3N0B02 20 3.0nH 0.1nH 13 0.4 190 13 LQP15MN3N3B02 20 3.3nH 0.1nH 13 0.4 190 14 LQP15MN3N6B02 20 3.6nH 0.1nH 13 0.5 170 15 LQP15MN3N9B02 20 3.9nH 0.1nH 13 0.5 170 16 LQP15MN4N3B02 20 4.3nH 0.1nH 13 0.6 160 17 LQP15MN4N7B02 20 4.7nH 0.1nH 13 0.6 160 18 LQP15MN5N1B02 20 5.1nH 0.1nH 13 0.7 140 19 LQP15MN5N6B02 20 5.6nH 0.1nH 13 0.7 140 20 LQP15MN6N2B02 20 6.2nH 0.1nH 13 0.9 130 21 LQP15MN6N8B02 20 6.8nH 0.1nH 13 0.9 130 22 LQP15MN7N5B02 20 7.5nH 0.1nH 13 1.1 110 23 LQP15MN8N2B02 20 8.2nH 0.1nH 13 1.1 110 24 LQP15MN9N1B02 20 9.1nH 0.1nH 13 1.3 100 25 LQP15MN10NG02 20 10nH 2% 13 1.3 100 26 LQP15MN12NG02 20 12nH 2% 13 1.6 90 27 LQP15MN15NG02 20 15nH 2% 13 1.8 90 28 LQP15MN18NG02 20 18nH 2% 13 2.0 80 29 LQP15MN22NG02 20 22nH 2% 13 2.6 70 30 LQP15MN27NG02 20 27nH 2% 13 3.1 70 31 LQP15MN33NG02 20 33nH 2% 13 3.8 60 oEKLMQW15F (High-frequency Winding Type) No. Part Number Inductance Quantity (pcs.) Nominal Tolerance Q min. DC Resistance () max. Rated Current (mA) 1 LQW15AN1N5B00 20 1.5nH 0.1nH 10 0.03 1000 2 LQW15AN2N7B00 20 2.7nH 0.1nH 20 0.05 850 3 LQW15AN3N9B00 20 3.9nH 0.1nH 25 0.07 750 4 LQW15AN4N3B00 20 4.3nH 0.1nH 25 0.07 750 5 LQW15AN4N7B00 20 4.7nH 0.1nH 25 0.07 750 Continued on the following page. 4 74 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Design Design Kits Kits Continued from the preceding page. No. 6 Part Number LQW15AN5N1B00 Inductance Quantity (pcs.) Nominal Tolerance Q min. DC Resistance () max. Rated Current (mA) 20 5.1nH 0.1nH 25 0.12 600 25 0.09 700 700 7 LQW15AN6N2B00 20 6.2nH 0.1nH 8 LQW15AN6N8G00 20 6.8nH 2% 25 0.09 9 LQW15AN7N5G00 20 7.5nH 2% 25 0.13 570 10 LQW15AN8N2G00 20 8.2nH 2% 25 0.14 540 11 LQW15AN8N7G00 20 8.7nH 2% 25 0.14 540 12 LQW15AN9N1G00 20 9.1nH 2% 25 0.14 540 13 LQW15AN10NG00 20 10nH 2% 25 0.17 500 14 LQW15AN11NG00 20 11nH 2% 30 0.14 500 15 LQW15AN12NG00 20 12nH 2% 30 0.14 500 16 LQW15AN13NG00 20 13nH 2% 25 0.21 430 17 LQW15AN15NG00 20 15nH 2% 30 0.16 460 18 LQW15AN16NG00 20 16nH 2% 25 0.24 370 19 LQW15AN18NG00 20 18nH 2% 25 0.27 370 20 LQW15AN19NG00 20 19nH 2% 25 0.27 370 21 LQW15AN22NG00 20 22nH 2% 25 0.30 310 22 LQW15AN24NG00 20 24nH 2% 25 0.52 280 0.52 280 23 LQW15AN27NG00 20 27nH 2% 25 24 LQW15AN30NG00 20 30nH 2% 25 0.58 270 25 LQW15AN33NG00 20 33nH 2% 25 0.63 260 26 LQW15AN36NG00 20 36nH 2% 25 0.63 260 27 LQW15AN39NG00 20 39nH 2% 25 0.70 250 28 LQW15AN47NG00 20 47nH 2% 25 1.08 210 29 LQW15AN56NG00 20 56nH 2% 25 1.17 200 30 LQW15AN68NG00 20 68nH 2% 20 1.96 140 31 LQW15AN82NG00 20 82nH 2% 20 2.24 130 32 LQW15ANR10J00 20 100nH 5% 20 2.52 120 33 LQW15ANR12J00 20 120nH 5% 20 2.66 110 34 LQW15AN1N3C10 20 1.3nH 0.2nH 20 0.017 1200 35 LQW15AN2N2C10 20 2.2nH 0.2nH 25 0.027 1000 36 LQW15AN2N4D10 20 2.4nH 0.5nH 25 0.027 1000 37 LQW15AN3N3D10 20 3.3nH 0.5nH 30 0.040 900 38 LQW15AN3N6C10 20 3.6nH 0.2nH 30 0.040 900 0.040 900 39 LQW15AN3N9D10 20 3.9nH 0.5nH 30 40 LQW15AN4N7D10 20 4.7nH 0.5nH 30 0.051 800 41 LQW15AN5N1C10 20 5.1nH 0.2nH 30 0.051 800 42 LQW15AN5N6C10 20 5.6nH 0.2nH 30 0.051 800 12 oEKLMQ18GA (High-frequency Winding Type) No. Part Number Inductance Quantity (pcs.) Nominal Tolerance Q min. DC Resistance () max. Rated Current (mA) 1 LQW18AN3N6C00 20 3.6nH 0.2nH 25 0.059 850 2 LQW18AN3N9C00 20 3.9nH 0.2nH 35 0.059 850 3 LQW18AN4N3C00 20 4.3nH 0.2nH 35 0.059 850 4 LQW18AN5N6C00 20 5.6nH 0.2nH 35 0.082 750 5 LQW18AN6N2C00 20 6.2nH 0.2nH 35 0.082 750 6 LQW18AN6N8C00 20 6.8nH 0.2nH 35 0.082 750 7 LQW18AN10NG00 20 10nH 2% 35 0.11 650 8 LQW18AN11NG00 20 11nH 2% 35 0.11 650 9 LQW18AN12NG00 20 12nH 2% 35 0.13 600 10 LQW18AN13NG00 20 13nH 2% 35 0.13 600 11 LQW18AN15NG00 20 15nH 2% 40 0.13 600 Continued on the following page. 5 75 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Design Kits Kits Design Continued from the preceding page. 12 Inductance Quantity (pcs.) Nominal Tolerance Q min. DC Resistance () max. Rated Current (mA) LQW18AN16NG00 20 16nH 2% 40 0.16 550 13 LQW18AN18NG00 20 18nH 2% 40 0.16 550 14 LQW18AN20NG00 20 20nH 2% 40 0.16 550 15 LQW18AN22NG00 20 22nH 2% 40 0.17 500 16 LQW18AN24NG00 20 24nH 2% 40 0.21 500 17 LQW18AN27NG00 20 27nH 2% 40 0.21 440 18 LQW18AN30NG00 20 30nH 2% 40 0.23 420 No. Part Number 12 19 LQW18AN33NG00 20 33nH 2% 40 0.23 420 20 LQW18AN36NG00 20 36nH 2% 40 0.26 400 21 LQW18AN39NG00 20 39nH 2% 40 0.26 400 22 LQW18AN43NG00 20 43nH 2% 40 0.29 380 23 LQW18AN47NG00 20 47nH 2% 38 0.29 380 24 LQW18AN51NG00 20 51nH 2% 38 0.33 370 25 LQW18AN56NG00 20 56nH 2% 38 0.35 360 26 LQW18AN62NG00 20 62nH 2% 38 0.51 280 27 LQW18AN68NG00 20 68nH 2% 38 0.38 340 28 LQW18AN72NG00 20 72nH 2% 34 0.56 270 29 LQW18AN75NG00 20 75nH 2% 34 0.56 270 30 LQW18AN82NG00 20 82nH 2% 34 0.60 250 31 LQW18AN91NG00 20 91nH 2% 34 0.64 230 32 LQW18ANR10G00 20 100nH 2% 34 0.68 220 33 LQW18ANR11G00 20 110nH 2% 32 1.2 200 34 LQW18ANR12G00 20 120nH 2% 32 1.3 180 35 LQW18ANR13G00 20 130nH 2% 32 1.4 170 36 LQW18ANR15G00 20 150nH 2% 32 1.5 160 37 LQW18ANR16G00 20 160nH 2% 32 2.1 150 38 LQW18ANR18G00 20 180nH 2% 25 2.2 140 39 LQW18ANR20G00 20 200nH 2% 25 2.4 120 120 40 LQW18ANR22G00 20 220nH 2% 25 2.5 41 LQW18ANR27G00 20 270nH 2% 30 3.4 110 42 LQW18ANR33G00 20 330nH 2% 30 5.5 85 43 LQW18ANR39G00 20 390nH 2% 30 6.2 80 44 LQW18ANR47G00 20 470nH 2% 30 7.0 75 38 0.032 1000 45 LQW18AN3N9C10 20 3.9nH 0.2nH 46 LQW18AN6N8C10 20 6.8nH 0.2nH 38 0.045 900 47 LQW18AN10NG10 20 10nH 2% 38 0.058 800 48 LQW18AN12NG10 20 12nH 2% 38 0.071 750 49 LQW18AN18NG10 20 18nH 2% 42 0.085 700 50 LQW18AN22NG10 20 22nH 2% 42 0.099 640 51 LQW18AN27NG10 20 27nH 2% 42 0.116 590 oEKLMQ18JA (High-frequency Winding Type) No. Part Number Inductance Quantity (pcs.) Nominal Tolerance Q min. DC Resistance () max. Rated Current (mA) 1400 1 LQW18AN2N2D10 20 2.2nH 0.5nH 25 0.018 2 LQW18AN3N6D00 20 3.6nH 0.5nH 25 0.059 850 3 LQW18AN3N9D10 20 3.9nH 0.5nH 38 0.032 1000 4 LQW18AN4N3D00 20 4.3nH 0.5nH 35 0.059 850 5 LQW18AN4N7D00 20 4.7nH 0.5nH 35 0.059 850 6 LQW18AN5N6D10 20 5.6nH 0.5nH 38 0.045 900 7 LQW18AN6N2D00 20 6.2nH 0.5nH 35 0.082 750 8 LQW18AN6N8D10 20 6.8nH 0.5nH 38 0.045 900 Continued on the following page. 6 76 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Design Design Kits Kits Continued from the preceding page. No. Part Number Inductance Quantity (pcs.) Nominal Tolerance Q min. DC Resistance () max. Rated Current (mA) 9 LQW18AN7N5D00 20 7.5nH 0.5nH 35 0.082 750 10 LQW18AN8N2D10 20 8.2nH 0.5nH 38 0.058 800 11 LQW18AN8N7D00 20 8.7nH 0.5nH 35 0.11 650 12 LQW18AN9N1D00 20 9.1nH 0.5nH 35 0.11 650 13 LQW18AN9N5D00 20 9.5nH 0.5nH 35 0.11 650 14 LQW18AN10NJ10 20 10nH 5% 38 0.058 800 15 LQW18AN11NJ00 20 11nH 5% 35 0.11 650 0.071 750 16 LQW18AN12NJ10 20 12nH 5% 38 17 LQW18AN13NJ00 20 13nH 5% 35 0.13 600 18 LQW18AN15NJ10 20 15nH 5% 42 0.085 700 19 LQW18AN16NJ00 20 16nH 5% 40 0.16 550 20 LQW18AN18NJ10 20 18nH 5% 42 0.085 700 21 LQW18AN20NJ00 20 20nH 5% 40 0.16 550 22 LQW18AN22NJ10 20 22nH 5% 42 0.099 640 23 LQW18AN24NJ00 20 24nH 5% 40 0.21 500 24 LQW18AN27NJ10 20 27nH 5% 42 0.116 590 25 LQW18AN30NJ00 20 30nH 5% 40 0.23 420 5% 42 0.132 550 400 26 LQW18AN33NJ10 20 33nH 27 LQW18AN36NJ00 20 36nH 5% 40 0.26 28 LQW18AN39NJ00 20 39nH 5% 40 0.26 400 29 LQW18AN43NJ00 20 43nH 5% 40 0.29 380 30 LQW18AN47NJ00 20 47nH 5% 38 0.29 380 31 LQW18AN51NJ00 20 51nH 5% 38 0.33 370 32 LQW18AN56NJ00 20 56nH 5% 38 0.35 360 33 LQW18AN62NJ00 20 62nH 5% 38 0.51 280 34 LQW18AN68NJ00 20 68nH 5% 38 0.38 340 35 LQW18AN72NJ00 20 72nH 5% 34 0.56 270 36 LQW18AN75NJ00 20 75nH 5% 34 0.56 270 0.60 250 37 LQW18AN82NJ00 20 82nH 5% 34 38 LQW18AN91NJ00 20 91nH 5% 34 0.64 230 39 LQW18ANR10J00 20 100nH 5% 34 0.68 220 40 LQW18ANR11J00 20 110nH 5% 32 1.2 200 41 LQW18ANR12J00 20 120nH 5% 32 1.3 180 32 1.4 170 42 LQW18ANR13J00 20 130nH 5% 43 LQW18ANR15J00 20 150nH 5% 32 1.5 160 44 LQW18ANR16J00 20 160nH 5% 32 2.1 150 45 LQW18ANR18J00 20 180nH 5% 25 2.2 140 46 LQW18ANR20J00 20 200nH 5% 25 2.4 120 47 LQW18ANR22J00 20 220nH 5% 25 2.5 120 48 LQW18ANR27J00 20 270nH 5% 30 3.4 110 49 LQW18ANR33J00 20 330nH 5% 30 5.5 85 50 LQW18ANR39J00 20 390nH 5% 30 6.2 80 51 LQW18ANR47J00 20 470nH 5% 30 7.0 75 Tolerance Q min. DC Resistance () max. Rated Current (mA) 1900 12 oEKLMQW2BB (High-frequency Winding Type) No. Part Number Inductance Quantity (pcs.) Nominal 1 LQW2BHN2N7D13 20 2.7nH 0.5nH 20 0.02 2 LQW2BHN3N1D13 20 3.1nH 0.5nH 20 0.02 1800 3 LQW2BHN3N3D13 20 3.3nH 0.5nH 20 0.02 1700 4 LQW2BHN5N6D13 20 5.6nH 0.5nH 35 0.02 1500 5 LQW2BHN6N8D13 20 6.8nH 0.5nH 35 0.02 1400 Continued on the following page. 7 77 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Design Kits Kits Design Continued from the preceding page. Inductance Quantity (pcs.) Nominal Tolerance Q min. DC Resistance () max. Rated Current (mA) LQW2BHN8N6D13 20 8.6nH 0.5nH 7 LQW2BHN10NJ13 20 10nH 5% 35 0.03 1300 35 0.03 8 LQW2BHN12NK13 20 12nH 1320 10% 40 0.04 9 LQW2BHN15NK13 20 15nH 1100 10% 40 0.04 1000 10 LQW2BHN18NK13 20 11 LQW2BHN21NK13 20 18.8nH 10% 40 0.05 1000 21nH 10% 40 0.05 12 LQW2BHN27NK13 950 20 27nH 10% 40 0.06 900 13 14 LQW2BHN33NJ03 20 33nH 5% 40 0.15 570 LQW2BHN39NJ03 20 39nH 5% 40 0.09 730 15 LQW2BHN47NJ03 20 47nH 5% 40 0.23 450 16 LQW2BHN56NJ03 20 56nH 5% 40 0.26 430 17 LQW2BHN68NJ03 20 68nH 5% 40 0.23 460 18 LQW2BHN82NJ03 20 82nH 5% 40 0.42 320 19 LQW2BHNR10J03 20 100nH 5% 40 0.38 350 20 LQW2BHNR12J03 20 120nH 5% 40 0.40 320 21 LQW2BHNR15J03 20 150nH 5% 30 0.47 390 22 LQW2BHNR18J03 20 180nH 5% 35 0.71 250 23 LQW2BHNR22J03 20 220nH 5% 35 0.70 240 24 LQW2BHNR27K03 20 270nH 10% 15 2.00 190 25 LQW2BHNR33K03 20 330nH 10% 15 2.20 180 26 LQW2BHNR39K03 20 390nH 10% 15 2.50 170 27 LQW2BHNR47K03 20 470nH 10% 15 2.80 160 Tolerance Q min. DC Resistance () max. Rated Current (mA) No. 6 Part Number oEKLMQM18A (for General Use Monolithic Type) No. 12 Part Number Inductance Quantity (pcs.) Nominal 1 LQM18NN47NM00 20 47nH 20% 10 0.30 50 2 LQM18NN68NM00 20 68nH 20% 10 0.30 50 3 LQM18NN82NM00 20 82nH 20% 10 0.30 50 4 LQM18NNR10K00 20 100nH 10% 15 0.50 50 5 LQM18NNR12K00 20 120nH 10% 15 0.50 50 6 LQM18NNR15K00 20 150nH 10% 15 0.60 50 7 LQM18NNR18K00 20 180nH 10% 15 0.60 50 8 LQM18NNR22K00 20 220nH 10% 15 0.80 50 9 LQM18NNR27K00 20 270nH 10% 15 0.80 50 10 LQM18NNR33K00 20 330nH 10% 15 0.85 35 11 LQM18NNR39K00 20 390nH 10% 15 1.00 35 12 LQM18NNR47K00 20 470nH 10% 15 1.35 35 13 LQM18NNR56K00 20 560nH 10% 15 1.55 35 14 LQM18NNR68K00 20 680nH 10% 15 1.70 35 15 LQM18NNR82K00 20 820nH 10% 15 2.10 35 16 LQM18NN1R0K00 20 1000nH 10% 35 0.60 25 17 LQM18NN1R2K00 20 1200nH 10% 35 0.80 25 18 LQM18NN1R5K00 20 1500nH 10% 35 0.80 25 19 LQM18NN1R8K00 20 1800nH 10% 35 0.95 25 20 LQM18NN2R2K00 20 2200nH 10% 35 1.15 15 Continued on the following page. 8 78 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Design Design Kits Kits Continued from the preceding page. oEKLMM21NA (for General Use Monolithic Type) No. Part Number Quantity (pcs.) Inductance Nominal Tolerance Q min. DC Resistance () max. Rated Current (mA) 1 LQM21NNR10K10 20 0.1H 10% 20 0.26 250 2 LQM21NNR12K10 20 0.12H 10% 20 0.29 250 3 LQM21NNR15K10 20 0.15H 10% 20 0.32 250 4 LQM21NNR18K10 20 0.18H 10% 20 0.35 250 5 LQM21NNR22K10 20 0.22H 10% 20 0.38 250 6 LQM21NNR27K10 20 0.27H 10% 20 0.42 250 7 LQM21NNR33K10 20 0.33H 10% 20 0.48 250 8 LQM21NNR39K10 20 0.39H 10% 25 0.53 200 9 LQM21NNR47K10 20 0.47H 10% 25 0.57 200 10 LQM21NNR56K10 20 0.56H 10% 25 0.63 150 11 LQM21NNR68K10 20 0.68H 10% 25 0.72 150 12 LQM21NNR82K10 20 0.82H 10% 25 0.81 150 13 LQM21NN1R0K10 20 1.0H 10% 45 0.40 50 14 LQM21NN1R2K10 20 1.2H 10% 45 0.47 50 15 LQM21NN1R5K10 20 1.5H 10% 45 0.50 50 16 LQM21NN1R8K10 20 1.8H 10% 45 0.57 50 17 LQM21NN2R2K10 20 2.2H 10% 45 0.63 30 18 LQM21NN2R7K10 20 2.7H 10% 45 0.69 30 19 LQM21NN3R3K10 20 3.3H 10% 45 0.80 30 20 LQM21NN3R9K10 20 3.9H 10% 45 0.89 30 LQM21NN4R7K10 20 4.7H 10% 45 1.00 30 21 oEKLMM21FA (for Choke Monolithic Type) No. Part Number Inductance Quantity (pcs.) Nominal Tolerance DC Resistance () Rated Current (mA) 1 LQM21FN1R0N00 20 1.0H 30% 0.2030% 220 2 LQM21FN2R2N00 20 2.2H 30% 0.2830% 150 3 LQM21FN4R7N00 20 4.7H 30% 0.3030% 80 4 LQM21FN100N00 20 10H 30% 0.5030% 60 5 LQM21FN220N00 20 22H 30% 0.3530% 13 6 LQM21FN470N00 20 47H 30% 0.6030% 7 7 LQM31FN100M00 20 10H 20% 0.5 max. 70 12 oEKLMH32MB (for General Use Winding Type) Inductance Quantity (pcs.) Nominal LQH32MN1R0M23 20 1.0H 2 LQH32MN1R2M23 20 1.2H 3 LQH32MN1R5K23 20 1.5H 4 LQH32MN1R8K23 20 1.8H 5 LQH32MN2R2K23 20 2.2H 6 LQH32MN2R7K23 20 7 LQH32MN3R3K23 20 8 LQH32MN3R9K23 20 9 LQH32MN4R7K23 20 10 LQH32MN5R6K23 20 11 LQH32MN6R8K23 20 12 LQH32MN8R2K23 20 No. 1 Part Number DC Resistance () max. Rated Current (mA) 20% 0.50 445 20% 0.60 425 10% 0.60 400 10% 0.70 390 10% 0.80 370 2.7H 10% 0.90 320 3.3H 10% 1.00 300 3.9H 10% 1.10 290 4.7H 10% 1.20 270 5.6H 10% 1.30 250 6.8H 10% 1.50 240 8.2H 10% 1.60 225 Tolerance Continued on the following page. 9 79 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Design Kits Kits Design Continued from the preceding page. Inductance Quantity (pcs.) Nominal LQH32MN100K23 20 10H 14 LQH32MN120K23 20 12H 15 LQH32MN150K23 20 15H 10% 2.2 170 16 LQH32MN180K23 20 18H 10% 2.5 165 17 LQH32MN220K23 20 22H 10% 2.8 150 18 LQH32MN270K23 20 27H 10% 3.1 125 19 LQH32MN330K23 20 33H 10% 3.5 115 20 LQH32MN390K23 20 39H 10% 3.9 110 21 LQH32MN470K23 20 47H 10% 4.3 100 22 LQH32MN560K23 20 56H 10% 4.9 85 23 LQH32MN680K23 20 68H 10% 5.5 80 24 LQH32MN820K23 20 82H 10% 6.2 70 25 LQH32MN101K23 20 100H 10% 7.0 80 26 LQH32MN121K23 20 120H 10% 8.0 75 27 LQH32MN151K23 20 150H 10% 9.3 70 28 LQH32MN181K23 20 180H 10% 10.2 65 29 LQH32MN221K23 20 220H 10% 11.8 65 30 LQH32MN271K23 20 270H 10% 12.5 65 31 LQH32MN331K23 20 330H 10% 13.0 65 32 LQH32MN391K23 20 390H 10% 22.0 50 33 LQH32MN471K23 20 470H 10% 25.0 45 34 LQH32MN561K23 20 560H 10% 28.0 40 Tolerance DC Resistance () max. Rated Current (mA) 500 No. Part Number 13 DC Resistance () max. Rated Current (mA) 10% 1.8 190 10% 2.0 180 Tolerance oEKLMH43MB (for General Use Winding Type) No. 12 Part Number Inductance Quantity (pcs.) Nominal 1 LQH43MN1R0M03 10 1.0H 20% 0.20 2 LQH43MN1R2M03 10 1.2H 20% 0.20 500 3 LQH43MN1R5M03 10 1.5H 20% 0.30 500 4 LQH43MN1R8M03 10 1.8H 20% 0.30 500 5 LQH43MN2R2M03 10 2.2H 20% 0.30 500 6 LQH43MN2R7M03 10 2.7H 20% 0.32 500 7 LQH43MN3R3M03 10 3.3H 20% 0.35 500 8 LQH43MN3R9M03 10 3.9H 20% 0.38 500 9 LQH43MN4R7K03 10 4.7H 10% 0.40 500 10 LQH43MN5R6K03 10 5.6H 10% 0.47 500 11 LQH43MN6R8K03 10 6.8H 10% 0.50 450 12 LQH43MN8R2K03 10 8.2H 10% 0.56 450 13 LQH43MN100K03 10 10H 10% 0.56 400 14 LQH43MN120K03 10 12H 10% 0.62 380 15 LQH43MN150K03 10 15H 10% 0.73 360 16 LQH43MN180K03 10 18H 10% 0.82 340 17 LQH43MN220K03 10 22H 10% 0.94 320 18 LQH43MN270K03 10 27H 10% 1.10 300 19 LQH43MN330K03 10 33H 10% 1.20 270 20 LQH43MN390K03 10 39H 10% 1.40 240 21 LQH43MN470K03 10 47H 10% 1.50 220 22 LQH43MN560K03 10 56H 10% 1.7 200 23 LQH43MN680K03 10 68H 10% 1.9 180 24 LQH43MN820K03 10 82H 10% 2.2 170 25 LQH43MN101K03 10 100H 10% 2.5 160 26 LQH43MN121K03 10 120H 10% 3.0 150 Continued on the following page. 10 80 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Design Design Kits Kits Continued from the preceding page. Inductance Quantity (pcs.) Nominal Tolerance DC Resistance () max. Rated Current (mA) LQH43MN151K03 10 150H 10% 3.7 130 28 LQH43MN181K03 10 180H 10% 4.5 120 29 LQH43MN221K03 10 220H 10% 5.4 110 30 LQH43MN271K03 10 270H 10% 6.8 100 31 LQH43MN331K03 10 330H 10% 8.2 95 32 LQH43MN391K03 10 390H 10% 9.7 90 33 LQH43MN471K03 10 470H 10% 11.8 80 34 LQH43MN561K03 10 560H 10% 14.5 70 35 LQH43MN681K03 10 680H 10% 17.0 65 36 LQH43MN821K03 10 820H 10% 20.5 60 37 LQH43MN102K03 10 1000H 10% 25.0 50 38 LQH43MN122K03 10 1200H 10% 30.0 45 39 LQH43MN152K03 10 1500H 10% 37.0 40 40 LQH43NN182K03 10 1800H 10% 45.0 35 41 LQH43NN222K03 10 2200H 10% 50.0 30 DC Resistance () Rated Current (mA) No. Part Number 27 oEKLMH32CB (for Choke Winding Type) Inductance Quantity (pcs.) Nominal Tolerance LQH32CNR15M33 20 0.15H 20% 0.02830% 1450 2 LQH32CNR27M33 20 0.27H 20% 0.03430% 1250 3 LQH32CNR47M33 20 0.47H 20% 0.04230% 1100 4 LQH32CN1R0M33 20 1.0H 20% 0.0630% 1000 5 LQH32CN2R2M33 20 2.2H 20% 0.09730% 790 6 LQH32CN4R7M33 20 4.7H 20% 0.1530% 650 7 LQH32CN100K33 20 10H 10% 0.330% 450 8 LQH32CN1R0M23 20 1.0H 20% 0.0930% 800 9 LQH32CN2R2M23 20 2.2H 20% 0.1330% 600 10 LQH32CN4R7M23 20 4.7H 20% 0.230% 450 11 LQH32CN100K23 20 10H 10% 0.4430% 300 12 LQH32CN220K23 20 22H 10% 0.7130% 250 13 LQH32CN470K23 20 47H 10% 1.330% 170 14 LQH32CN101K23 20 100H 10% 3.530% 100 15 LQH32CN221K23 20 220H 10% 8.430% 70 16 LQH32CN331K23 20 330H 10% 1030% 60 17 LQH32CN391K23 20 390H 10% 1730% 60 18 LQH32CN471K23 20 470H 10% 1930% 60 19 LQH32CN561K23 20 560H 10% 2230% 60 20 LQH32CN1R0M53 20 1.0H 20% 0.0630% 1000 21 LQH32CN2R2M53 20 2.2H 20% 0.09730% 790 22 LQH32CN4R7M53 20 4.7H 20% 0.1530% 650 23 LQH32CN100K53 20 10H 10% 0.330% 450 24 LQH32CN150K53 20 15H 10% 0.5830% 300 25 LQH32CN220K53 20 22H 10% 0.7130% 250 26 LQH32CN330K53 20 33H 10% 1.130% 200 27 LQH32CN470K53 20 47H 10% 1.330% 170 28 LQH32CN680K53 20 68H 10% 2.230% 130 29 LQH32CN101K53 20 100H 10% 3.530% 100 No. 1 Part Number 12 Continued on the following page. 11 81 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Design Kits Design Kits Continued from the preceding page. oEKLMH43CB (for Choke Winding Type) No. Part Number Inductance Quantity (pcs.) Nominal Tolerance DC Resistance () Rated Current (mA) 1 LQH43CN1R0M03 10 1.0H 20% 0.08 max 1080 2 LQH43CN1R5M03 10 1.5H 20% 0.09 max 1000 3 LQH43CN2R2M03 10 2.2H 20% 0.11 max 900 4 LQH43CN3R3M03 10 3.3H 20% 0.13 max 800 5 LQH43CN4R7M03 10 4.7H 20% 0.15 max 750 6 LQH43CN6R8M03 10 6.8H 20% 0.20 max 720 7 LQH43CN100K03 10 10H 10% 0.24 max 650 8 LQH43CN150K03 10 15H 10% 0.32 max 570 9 LQH43CN220K03 10 22H 10% 0.60 max 420 10 LQH43CN330K03 10 33H 10% 1.00 max 310 11 LQH43CN470K03 10 47H 10% 1.10 max 280 12 LQH43CN680K03 10 68H 10% 1.70 max 220 13 LQH43CN101K03 10 100H 10% 2.20 max 190 14 LQH43CN151K03 10 150H 10% 3.50 max 130 15 LQH43CN221K03 10 220H 10% 4.00 max 110 16 LQH43CN331K03 10 330H 10% 6.80 max 100 17 LQH43CN471K03 10 470H 10% 8.50 max 90 18 LQH3KSN561N23 10 560H 30% 7.830% 50 19 LQH3KSN681N23 10 680H 30% 9.130% 40 20 LQH3KSN102N23 10 1000H 30% 1130% 30 21 LQH3KSN152N23 10 1500H 30% 2330% 25 22 LQH3KSN222N23 10 2200H 30% 2830% 20 12 12 82 O05E13.pdf 05.3.4 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Information 1. Land Area and Q-F Characteristics PCB: Ag-Pb printed land formed on 0.6mm-thick alumina plate Solder: H60A Soldering: Reflow soldering Solder layer: Sections shown by oblique lines in figure LQH32MN680K23 100 A : Characteristic of coil itself 1 B: 1 1.3 2 80 Characteristic of chip mounted on land A 1 5.5 2.5 60 C: Characteristic of chip mounted on land Q 2.5 1 2.5 B (in mm) 40 C 20 0 10k 50k 100k 500k 1M 5M Frequency (Hz) 2. Coupling coefficient versus Coil-to-coil Spacing LQH32M Series 14 Coil-to-coil Spacing 12 Coupling Coefficient (%) 10 8 6 4 330H 1H 2 0 0 1 2 3 4 5 6 Coil-to-coil Spacing (mm) 83 !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering. O05E13.pdf 05.3.4 Murata Chip S-Parameter & Impedance Library Download Service The program enables you to calculate, view and print graphs of impedance and S parameter of chip capacitors or chip inductors. S parameter data in Touchstone format can also be copied. Main Window * Easy operation due to using Windows interface. * Fast calculation of data and graph for S parameter and impedance of chip capacitors or chip inductors. * S parameter is saved in your personal computer and utilized for circuit simulation. This software uses the Global Part Numbers that have been adopted since June 2001. The Previous Part Numbers can be used by selecting "view" menu. Please check carefully when referring to the contents. This simulator can be downloaded from Murata web site. 84 http://www.murata.com/designlib/mcsil.html !Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc. This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering. O05E13.pdf 05.3.4 Note: 1. Export Control For customers outside Japan Murata products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive weapons (nuclear weapons, chemical or biological weapons, or missiles), or any other weapons. For customers in Japan For products which are controlled items subject to the "Foreign Exchange and Foreign Trade Law" of Japan, the export license specified by the law is required for export. < < > > 2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially high reliability for the prevention of defects which might directly damage to a third party's life, body or property, or when one of our products is intended for use in applications other than those specified in this catalog. q Aircraft equipment w Aerospace equipment e Undersea equipment r Power plant equipment t Medical equipment y Transportation equipment (vehicles, trains, ships, etc.) u Traffic signal equipment i Disaster prevention / crime prevention equipment o Data-processing equipment !0 Application of similar complexity and/or reliability requirements to the applications listed in the above 3. Product specifications in this catalog are as of January 2005. They are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product engineers. 4. Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc. 5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned above under licenses without our consent. 7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process. http://www.murata.com/ Head Office 1-10-1, Higashi Kotari, Nagaokakyo-shi, Kyoto 617-8555, Japan Phone: 81-75-951-9111 International Division 3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: intl@murata.co.jp