Cat.No.O05E-13
Murata
Manufacturing Co., Ltd.
Chip Coils
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note O05E13.pdf 05.3.4
1
2
3
4
5
6
7
8
9
10
11
12
Part Numbering 2
Products Guide 4
Selection Guide 5
High Frequency
Monolithic Type LQG15H/LQG18H Series 6
Film Type
LQP03T/LQP15T/LQP15M/LQP18M Series
13
Wound Type LQW15A/LQW18A Series 23
Wound Type LQW2BH/LQW31H Series 33
Wound Type LQH31H Series 37
for General Use
Monolithic Type LQM18N/LQM21N Series 38
Wound Type LQH31M/LQH32M/LQH43M (N) Series 41
for DC-DC Converter
Wound Type LQH2MC Series 47
for Choke
Monolithic Type LQM21D/LQM21F/LQM31F Series 48
Wound Type LQH31C/LQH32C/LQH43C Series 52
Magnetic Shielded Type LQH3KS Series 57
Wound/Magnetic Shielded Type
LQH55D/LQH66S Series 59
!Caution/Notice 62
Packaging 69
Design Kits 71
Information 83
1
2
3
4
5
6
7
8
9
10
11
12
CONTENTS
Recycled Paper
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
The Bluetooth trademarks are owned by Bluetooth SIG, Inc., U. S. A.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note O05E13.pdf 05.3.4
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
(Part Number)
Chip Coils (SMD)
uInductance Tolerance
eDimensions (LgW)
Code
0.6g0.3mm
1.0g0.5mm
1.6g0.8mm
2.0g1.25mm
2.0g1.5mm
2.0g1.6mm
3.2g1.6mm
3.2g2.5mm
3.3g3.3mm
4.5g3.2mm
5.7g5.0mm
6.3g6.3mm
Dimensions (LgW)
0201
0402
0603
0805
0805
0806
1206
1210
1212
1812
2220
2525
EIA
03
15
18
21
2B
2M
31
32
3K
43
55
66
Code
B
C
D
G
H
J
K
M
N
S
W
±0.1nH
±0.2nH
±0.5nH
±2%
±3%
±5%
±10%
±20%
±30%
±0.3nH
±0.05nH
Inductance Tolerance
qProduct ID
LQ Chip Coils
Product ID
wStructure
Code
G
H
M
P
W
Monolithic Type (Air-core Coil)
Wound Type (Ferrite Core)
Monolithic Type (Ferrite Core)
Film Type
Wound Type (Air-core Coil)
Structure
rApplications and Characteristics
Code
Monolithic Air-core
for Resonant Circuit
for Choke
(Low-current DC Power Supplies)
for Choke (DC Power Supplies)
Film Type
Film Type (Low DC Resistance Type)
High Q Type (UHF-SHF)
High Q Type (VHF-UHF)
for Resonant Circuit
for Resonant Circuit (Coating Type)
for Choke
for Choke (Coating Type)
for Choke (Magnetically Shielded Type)
for High-frequency Resonant Circuit
Applications and Characteristics
H
N
D
F
M
T
A
H
N
M
D
C
S
H
Series
LQG
LQM
LQP
LQW
LQH
yInductance
Expressed by three figures. The unit is micro-henry (µH). The first
and second figures are significant digits, and the third figure
expresses the number of zeros which follow the two figures. If
there is a decimal point, it is expressed by the capital letter "R". In
this case, all figures are significant digits. If inductance is less
than 0.1µH, the inductance code is expressed by a combination
of two figures and the capital letter "N", and the unit of
inductance is nano-henry (nH).
The capital letter "N" indicates the unit of "nH", and also
expresses a decimal point. In this case, all figures are significant
digits.
iFeatures
0
2
3
Sn
LF Solder
Code Electrode
LQG18H/LQP03T/LQWppA/LQM
LQG15H/LQP15T/LQPppM/LQH2MC
LQWppH/LQH (Except LQH2MC)
Series
0
1
2
3
5
7
Standard Type
High-Q/
Low DC Resistance
Standard Type
Low DC Resistance
Standard Type
Low DC Resistance
Low Profile Type
Large Current Type
Code Features Series
tCategory
N
SStandard Type
Code Category
oElectrode
•Lead (Pb) Free
t
N
y
331
q
LQ
u
K
r
M
e
32
w
H
i
2
o Part Numbering
LQG/LQP/LQW/LQM*1/LQH*2
LQW15A/LQW18A/LQW2BH
LQM21N
LQH32C
LQH32C/LQH32M/LQH3KS
LQH32C
LQH32C/LQH3KS
LQM21F
*1 : Except LQM21N Series
*2 : Except LQH32/LQH3K Series
3
o!0
L
Continued on the following page.
2
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note O05E13.pdf 05.3.4
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
t
N
y
331
q
LQ
u
K
r
M
e
32
w
H
i
2
(Part Number)
!0Packaging
K
L
B
J
D
LQH*1 /LQWppH/LQM31F/LQM21*2
LQH/LQWppH/LQM31F/LQM21*2
All Series
LQW18A/LQG/LQM18N/LQM21*3 /LQP*4
LQWppA/LQG/LQM18N/LQM21*3 /LQP
Plastic Taping (ø330mm Reel)
Plastic Taping (ø180mm Reel)
Bulk
Paper Taping (ø330mm Reel)
Paper Taping (ø180mm Reel)
Code Packaging Series
Continued from the preceding page.
*1 Except LQH43C/LQH66S
*2 LQM21D(22 - 47µH)/LQM21F(4.7 - 47µH)/LQM21N(2.7 - 4.7µH) only.
*3 LQM21D(1.0 - 10µH)/LQM21F(1.0 - 2.2µH)/LQM21N(0.1 - 2.2µH) only.
*4 Except LQP15T
3
o !0
L
3
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note O05E13.pdf 05.3.4
4
Products Guide
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Application Part Number Structure Dimensions
(mm) EIA Code
Inductance Range (H)
1n 10n 100n 1 10 100 1m 10m
Chokes
DC-DC Converter Type
Tight Inductance
Tolerance
High Frequency Range
General Frequency Range
Wound
(ferrite core)
Magnetically shielded
multilayer
Wound
(air core)
Wound
(ferrite core)
Magnetically shielded
multilayer
Magnetically shielded
Multilayer
Film
Wound
Wound
Wound
Magnetically shielded
Murata's LQp series of chip coils consists of compact, high-performance inductors. Their innovative coil and case structures
mean low DC resistance and outstanding high-frequency characteristics. The series is designed for a variety of applications,
facilitating component selection for individual circuit requirements.
CAUTION : Use rosin-based flux, but not strong acidic flux (with chlorine content exceeding 0.2wt%) when soldering chip coil.
Do not use water-soluble flux.
µµµ
1206 8.8nH 100nH
LQW31H 3.2 1.6
1206 54nH 880nH
LQH31H 3.2 1.6
0805 2.7nH 470nH
LQW2BH 2.0 1.5
0402
LQG15H 1.0nH
1.0 0.5
0402
LQP15M 1.0nH 33nH
1.0 0.5
0402
LQW15A 1.3nH 120nH
1.0 0.5
0603
LQG18H 100nH
1.2nH
1.6 0.8
0603 47nH 2200nH
LQM18N 1.6 0.8
0603
LQW18A 470nH2.2nH
1.6 0.8
0201
LQP03T 0.6nH 27nH
0.6 0.3
0402
LQP15T 18nH
1.0nH
1.0 0.5
0603
LQP18M 100nH
1.3nH
1.6 0.8
2525
LQH66S 6.3
6.3 0.27 H 10000 H
µ
µ
1212
LQH3KS 3.3
3.3 3.3 H 2200 H
µ
µ
2220
LQH55D 5.7
5.0 0.12 H 10000 H
µµ
1206
LQM31F 3.2 1.6 10 H
µ
0805
LQM21F 2.0 1.25 47 H
1.0 H
µµ
0805
LQM21D 2.0 1.25 47 H
1.0 H
µµ
0806
LQH2MC 2.0 1.6
1812
LQH43C 4.5
3.2 470 H
1.0 H
µµ
1210
LQH32C 3.2
2.5 0.15 H 560 H
µ
µ
1206
LQH31C 3.2 1.6 0.12 H 100 H
µ
µ
0805
LQM21N 2.0 1.25 0.1 H 4.7 H
µ
µ
1206
LQH31M 3.2 1.6 0.15 H 100 H
µ
µ
1210
LQH32M 3.2
2.5 560 H
1.0 H
µµ
1812
LQH43M(N) 4.5
3.2 2200 H
1.0 H
µµ
270nH
82 H
4.7 H
µµ
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note O05E13.pdf 05.3.4
5
Selection Guide
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Start
Operating Frequency
Application
Wire Wound
Less than 100MHz
General High FrequencyChoke
Multilayer Wire Wound Multilayer Wire Wound Film Multilayer
1212
LQH3KS_23/_53
3.3–2200µH 20–320mA
0805
LQM21D
1.0–47µH 7–60mA
1206
LQH31C
0.12–100µH 80–970mA
0805
LQM21F
1.0–47µH 7–220mA
1210
LQH32C
(Standard type)
0.15–560µH 60–1450mA
1210
LQH32C_53
(Low profile type)
1.0–100µH 100–1000mA
1812
LQH43C
1.0–470µH 90–1080mA
2220
LQH55D
0.12–10000µH 0.05–6.0A
2525
LQH66S
0.27
10000µH 0.05–6.0A
1206
LQM31F
10µH 70mA
1206
LQH31M
0.15–100µH
0603
LQM18N
47–2200nH
1210
LQH32M
1.0–560µH
0805
LQM21N
0.1–4.7µH
1812
LQH43M(N)
1.0–2200µH
0402
LQW15A
1.3–120nH
0201
LQP03T
0.6–27nH
0603
LQW18A
2.2–470nH
0402
LQP15T
1.0–18nH
0805
LQW2BH
2.7–470nH
1206
LQW31H
8.8–100nH
1206
LQH31H
54–880nH
0402
LQP15M
1.0–33nH
0603
LQP18M
1.3–100nH
0402
LQG15H
1.0–270nH
0603
LQG18H
1.2–100nH
Greater than 100MHz
Dimensions in inches
DC-DC Converter
Wire Wound
0806
LQH2MC
4.7–82µH
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note O05E13.pdf 05.3.4
6
1
!Note • Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Chip Coils
High Frequency Monolithic Type LQG15H/LQG18H Series
LQG15HN Series
The LQG15HN series are chip inductors specifically
designed for high frequency applications.
The LQG15H series is designed to realize stable
characteristics in high frequency range applying
integrated multilayer process. The integrated
multilayer process enables a wide range of inductance
values with tight tolerance.
Features
1. High-Q, stable inductance in high frequency is
achieved by the original structure that minimizes
stray capacitance. It is suitable for the high
frequency circuits of mobile communication
equipment.
2. The small size of LQG15H (1.0x0.5x0.5mm) is
suitable for small and low profile mobile equipment.
3. The external electrodes with nickel barrier
structure provide excellent solder heat resistance.
4. Wide variation in inductance value
1-10nH (E24 step)
10-120nH (E12 step)
Applications
1. High frequency circuits of mobile phones such as
PA, ANT, VCO, SAW, etc.
2. Mobile phones such as GSM, CDMA, PDC, etc.
3. "Bluetooth"
4. W-LAN
5. High frequency circuits in general
0.5±0.05
(in mm)
1.0±0.05
0.5±0.05
0.25±0.1 Polarity Marking
Part Number Inductance
(nH) Test Frequency
(MHz)
Rated
Current
(mA)
DC Resistance
(ohm) Q
(min.) Test Frequency
(MHz)
Self Resonance
Frequency (min.)
(MHz) EIA
LQG15HN1N0S02 1.0 ±0.3nH 100 300 0.10 max. 8 100 6000 0402
LQG15HN1N1S02 1.1 ±0.3nH 100 300 0.10 max. 8 100 6000 0402
LQG15HN1N2S02 1.2 ±0.3nH 100 300 0.10 max. 8 100 6000 0402
LQG15HN1N3S02 1.3 ±0.3nH 100 300 0.10 max. 8 100 6000 0402
LQG15HN1N5S02 1.5 ±0.3nH 100 300 0.10 max. 8 100 6000 0402
LQG15HN1N6S02 1.6 ±0.3nH 100 300 0.10 max. 8 100 6000 0402
LQG15HN1N8S02 1.8 ±0.3nH 100 300 0.10 max. 8 100 6000 0402
LQG15HN2N0S02 2.0 ±0.3nH 100 300 0.12 max. 8 100 6000 0402
LQG15HN2N2S02 2.2 ±0.3nH 100 300 0.15 max. 8 100 6000 0402
LQG15HN2N4S02 2.4 ±0.3nH 100 300 0.16 max. 8 100 6000 0402
LQG15HN2N7S02 2.7 ±0.3nH 100 300 0.17 max. 8 100 6000 0402
LQG15HN3N0S02 3.0 ±0.3nH 100 300 0.18 max. 8 100 6000 0402
LQG15HN3N3S02 3.3 ±0.3nH 100 300 0.19 max. 8 100 6000 0402
LQG15HN3N6S02 3.6 ±0.3nH 100 300 0.19 max. 8 100 6000 0402
LQG15HN3N9S02 3.9 ±0.3nH 100 300 0.19 max. 8 100 6000 0402
LQG15HN4N3S02 4.3 ±0.3nH 100 300 0.21 max. 8 100 6000 0402
LQG15HN4N7S02 4.7 ±0.3nH 100 300 0.23 max. 8 100 6000 0402
LQG15HN5N1S02 5.1 ±0.3nH 100 300 0.24 max. 8 100 6000 0402
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note O05E13.pdf 05.3.4
7
1
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number Inductance
(nH) Test Frequency
(MHz)
Rated
Current
(mA)
DC Resistance
(ohm) Q
(min.) Test Frequency
(MHz)
Self Resonance
Frequency (min.)
(MHz) EIA
Continued from the preceding page.
LQG15HN5N6S02 5.6 ±0.3nH 100 300 0.26 max. 8 100 5300 0402
LQG15HN6N2S02 6.2 ±0.3nH 100 300 0.27 max. 8 100 4300 0402
LQG15HN6N8J02 6.8 ±5% 100 300 0.29 max. 8 100 4200 0402
LQG15HN7N5J02 7.5 ±5% 100 300 0.31 max. 8 100 3900 0402
LQG15HN8N2J02 8.2 ±5% 100 300 0.33 max. 8 100 3600 0402
LQG15HN9N1J02 9.1 ±5% 100 300 0.34 max. 8 100 3400 0402
LQG15HN10NJ02 10 ±5% 100 300 0.35 max. 8 100 3200 0402
LQG15HN12NJ02 12 ±5% 100 300 0.41 max. 8 100 2800 0402
LQG15HN15NJ02 15 ±5% 100 300 0.46 max. 8 100 2300 0402
LQG15HN18NJ02 18 ±5% 100 300 0.51 max. 8 100 2100 0402
LQG15HN22NJ02 22 ±5% 100 300 0.58 max. 8 100 1800 0402
LQG15HN27NJ02 27 ±5% 100 300 0.67 max. 8 100 1600 0402
LQG15HN33NJ02 33 ±5% 100 200 0.67 max. 8 100 1500 0402
LQG15HN39NJ02 39 ±5% 100 200 1.06 max. 8 100 1200 0402
LQG15HN47NJ02 47 ±5% 100 200 1.15 max. 8 100 1000 0402
LQG15HN56NJ02 56 ±5% 100 200 1.20 max. 8 100 800 0402
LQG15HN68NJ02 68 ±5% 100 180 1.25 max. 8 100 800 0402
LQG15HN82NJ02 82 ±5% 100 150 1.60 max. 8 100 600 0402
LQG15HNR10J02 100 ±5% 100 150 1.60 max. 8 100 600 0402
LQG15HNR12J02 120 ±5% 100 150 1.60 max. 8 100 600 0402
Operating Temp. Range: -55°C to +125°C
Only for reflow soldering.
Q-Frequency Characteristics
100 1000 10000
Frequency (MHz)
100
80
60
40
20
0
Q
1.5nH
4.7nH
12nH
33nH
68nH
120nH
Inductance-Frequency Characteristics
100 1000 10000
Frequency (MHz)
1000
100
10
1
Inductance (nH)
1.5nH
12nH
4.7nH
33nH
68nH
120nH
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note O05E13.pdf 05.3.4
8
1
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
LQG15HS Series
The LQG15HS series are chip inductors specifically
designed for high frequency applications.
The LQG15H series is designed to realize stable
characteristics in high frequency range applying
integrated multilayer process. The integrated
multilayer process enables a wide range of inductance
values with tight tolerance.
Since recent mobile phones install color LCDs and camera
modules, the power consumption becomes higher.
In order to reduce power consumption a low DC
resistance is strongly required. The LQG15HS has
achieved the lowest DC resistance.
Features
1. High-Q, stable inductance in high frequency is
achieved by the original structure that minimizes
stray capacitance. It is suitable for the high
frequency circuits of mobile communication
equipment.
2. The small size of LQG15H (1.0x0.5x0.5mm) is
suitable for small and low profile mobile equipment.
3. The external electrodes with nickel barrier
structure provide excellent solder heat resistance.
4. Wide variation in inductance value
1-10nH (E24 step)
10-270nH (E12 step)
Applications
1. High frequency circuits of mobile phones such as
PA, ANT, VCO, SAW, etc.
2. Mobile phones such as GSM, CDMA, PDC, etc.
3. "Bluetooth"
4. W-LAN
5. High frequency circuits in general
Supplements
The product with tight inductance tolerance.
Please contact our local sales or product engineers.
0.5±0.05
(in mm)
1.0±0.05
0.5±0.05
0.25±0.1 Polarity Marking
Part Number Inductance
(nH) Test Frequency
(MHz)
Rated
Current
(mA)
DC Resistance
(ohm) Q
(min.) Test Frequency
(MHz)
Self Resonance
Frequency (min.)
(MHz) EIA
LQG15HS1N0S02 1.0 ±0.3nH 100 300 0.07 max. 8 100 10000 0402
LQG15HS1N1S02 1.1 ±0.3nH 100 300 0.09 max. 8 100 6000 0402
LQG15HS1N2S02 1.2 ±0.3nH 100 300 0.09 max. 8 100 6000 0402
LQG15HS1N3S02 1.3 ±0.3nH 100 300 0.09 max. 8 100 6000 0402
LQG15HS1N5S02 1.5 ±0.3nH 100 300 0.1 max. 8 100 6000 0402
LQG15HS1N6S02 1.6 ±0.3nH 100 300 0.1 max. 8 100 6000 0402
LQG15HS1N8S02 1.8 ±0.3nH 100 300 0.1 max. 8 100 6000 0402
LQG15HS2N0S02 2.0 ±0.3nH 100 300 0.1 max. 8 100 6000 0402
LQG15HS2N2S02 2.2 ±0.3nH 100 300 0.12 max. 8 100 6000 0402
LQG15HS2N4S02 2.4 ±0.3nH 100 300 0.15 max. 8 100 6000 0402
LQG15HS2N7S02 2.7 ±0.3nH 100 300 0.15 max. 8 100 6000 0402
LQG15HS3N0S02 3.0 ±0.3nH 100 300 0.17 max. 8 100 6000 0402
LQG15HS3N3S02 3.3 ±0.3nH 100 300 0.17 max. 8 100 6000 0402
LQG15HS3N6S02 3.6 ±0.3nH 100 300 0.18 max. 8 100 6000 0402
LQG15HS3N9S02 3.9 ±0.3nH 100 300 0.18 max. 8 100 6000 0402
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note O05E13.pdf 05.3.4
9
1
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Part Number Inductance
(nH) Test Frequency
(MHz)
Rated
Current
(mA)
DC Resistance
(ohm) Q
(min.) Test Frequency
(MHz)
Self Resonance
Frequency (min.)
(MHz) EIA
Continued from the preceding page.
LQG15HS4N3S02 4.3 ±0.3nH 100 300 0.18 max. 8 100 6000 0402
LQG15HS4N7S02 4.7 ±0.3nH 100 300 0.18 max. 8 100 6000 0402
LQG15HS5N1S02 5.1 ±0.3nH 100 300 0.2 max. 8 100 5300 0402
LQG15HS5N6S02 5.6 ±0.3nH 100 300 0.2 max. 8 100 4500 0402
LQG15HS6N2S02 6.2 ±0.3nH 100 300 0.22 max. 8 100 4500 0402
LQG15HS6N8J02 6.8 ±5% 100 300 0.24 max. 8 100 4500 0402
LQG15HS7N5J02 7.5 ±5% 100 300 0.24 max. 8 100 4200 0402
LQG15HS8N2J02 8.2 ±5% 100 300 0.24 max. 8 100 3700 0402
LQG15HS9N1J02 9.1 ±5% 100 300 0.26 max. 8 100 3400 0402
LQG15HS10NJ02 10 ±5% 100 300 0.26 max. 8 100 3400 0402
LQG15HS12NJ02 12 ±5% 100 300 0.28 max. 8 100 3000 0402
LQG15HS15NJ02 15 ±5% 100 300 0.32 max. 8 100 2500 0402
LQG15HS18NJ02 18 ±5% 100 300 0.36 max. 8 100 2200 0402
LQG15HS22NJ02 22 ±5% 100 300 0.42 max. 8 100 1900 0402
LQG15HS27NJ02 27 ±5% 100 300 0.46 max. 8 100 1700 0402
LQG15HS33NJ02 33 ±5% 100 200 0.58 max. 8 100 1600 0402
LQG15HS39NJ02 39 ±5% 100 200 0.65 max. 8 100 1200 0402
LQG15HS47NJ02 47 ±5% 100 200 0.72 max. 8 100 1000 0402
LQG15HS56NJ02 56 ±5% 100 200 0.82 max. 8 100 800 0402
LQG15HS68NJ02 68 ±5% 100 180 0.92 max. 8 100 800 0402
LQG15HS82NJ02 82 ±5% 100 150 1.2 max. 8 100 700 0402
LQG15HSR10J02 100 ±5% 100 150 1.25 max. 8 100 600 0402
LQG15HSR12J02 120 ±5% 100 150 1.3 max. 8 100 600 0402
LQG15HSR15J02 150 ±5% 100 140 2.99 max. 8 100 550 0402
LQG15HSR18J02 180 ±5% 100 130 3.38 max. 8 100 500 0402
LQG15HSR22J02 220 ±5% 100 120 3.77 max. 8 100 450 0402
LQG15HSR27J02 270 ±5% 100 110 4.94 max. 8 100 400 0402
Operating Temp. Range: -55°C to +125°C
Only for reflow soldering.
Q-Frequency Characteristics
0
20
40
60
80
100 1000 10000
Frequency (MHz)
Q
120nH
1.0nH
3.3nH
10nH
22nH
56nH
270nH
Inductance-Frequency Characteristics
1
1
10
100
1000
100 1000 10000
Frequency (MHz)
Inductance (nH)
E4991A
3.3nH
1.0nH
10nH
22nH
56nH
120nH
270nH
Continued on the following page.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note O05E13.pdf 05.3.4
10
1
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Continued from the preceding page.
Reference Data
Part Number
LQG15HS1N0S02
LQG15HS1N1S02
LQG15HS1N2S02
LQG15HS1N3S02
LQG15HS1N5S02
LQG15HS1N6S02
LQG15HS1N8S02
LQG15HS2N0S02
LQG15HS2N2S02
LQG15HS2N4S02
LQG15HS2N7S02
LQG15HS3N0S02
LQG15HS3N3S02
LQG15HS3N6S02
LQG15HS3N9S02
LQG15HS4N3S02
LQG15HS4N7S02
LQG15HS5N1S02
LQG15HS5N6S02
LQG15HS6N2S02
LQG15HS6N8J02
LQG15HS7N5J02
LQG15HS8N2J02
LQG15HS9N1J02
LQG15HS10NJ02
LQG15HS12NJ02
LQG15HS15NJ02
LQG15HS18NJ02
LQG15HS22NJ02
LQG15HS27NJ02
LQG15HS33NJ02
LQG15HS39NJ02
LQG15HS47NJ02
LQG15HS56NJ02
LQG15HS68NJ02
LQG15HS82NJ02
LQG15HSR10J02
LQG15HSR12J02
1.0
1.1
1.2
1.3
1.5
1.6
1.8
2.0
2.2
2.4
2.7
3.0
3.3
3.6
3.9
4.3
4.7
5.1
5.6
6.2
6.8
7.5
8.2
9.1
10
12
15
18
22
27
33
39
47
56
68
82
100
120
Inductance (nH)
100MHz Rdc
( typ.) SRF
(MHz typ.)
32
35
34
34
31
31
31
31
32
32
31
32
31
31
31
31
31
31
30
29
29
28
27
27
27
26
26
25
23
21
20
19
17
15
12
9
-
-
800MHz
34
37
36
36
34
33
33
32
34
34
33
34
33
33
33
33
33
33
32
31
30
29
29
29
29
27
27
25
24
21
20
18
16
13
10
6
-
-
900MHz
51
59
56
56
50
50
48
47
48
51
49
49
46
45
49
44
42
44
41
41
40
38
35
36
35
28
25
22
16
-
-
-
-
-
-
-
-
-
1.8GHz
Q (typ.)
54
62
58
57
53
52
49
48
49
52
50
51
47
47
47
45
43
45
40
41
40
37
34
35
33
24
21
18
-
-
-
-
-
-
-
-
-
-
2.0GHz
57
64
60
58
55
54
50
49
50
52
50
50
46
46
46
44
42
42
38
38
37
34
29
31
28
18
13
-
-
-
-
-
-
-
-
-
-
-
2.4GHz
0.03
0.04
0.05
0.07
0.08
0.09
0.1
0.12
0.13
0.16
0.17
0.18
0.22
0.26
0.30
0.33
0.40
0.44
0.48
0.55
0.63
0.77
0.92
1.00
11700
10000
8600
7000
9700
8600
7500
6400
6200
10000
8700
8000
6700
8000
7500
6500
6200
5800
5000
5100
4900
4500
4100
3900
3200
2900
2800
2500
2000
1900
1700
1500
1300
1200
1100
900
800
E4991&16197A
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note O05E13.pdf 05.3.4
11
1
!Note Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
LQG18H Series
The LQG18H series is designed to realize stable
characteristics in high frequency range applying
integrated multilayer process.
Features
1. High-Q, stable inductance in high frequency is
achieved by the original structure that
minimizes stray capacitance. It is suitable for
the high frequency circuits of mobile communication
equipment.
2. Small size of LQG18H (1.6x0.8x0.8mm) is suitable
for small, handy equipment, especially for card
size equipment.
3. The external electrodes with nickel barrier
structure provide excellent solder heat resistance.
Applications
1. High frequency circuits of mobile phones such as
PA, ANT, VCO, SAW, etc.
2. Mobile phones such as GSM, CDMA, PDC, etc.
3. "Bluetooth"
4. W-LAN
5. High frequency circuits in general
1.6±0.15
0.3±0.2 Polarity Marking
0.8±0.15
(in mm)
0.8±0.15
Part Number Inductance
(nH) Test Frequency
(MHz)
Rated
Current
(mA)
DC Resistance
(ohm) Q
(min.) Test Frequency
(MHz)
Self Resonance
Frequency (min.)
(MHz) EIA
LQG18HN1N2S00 1.2 ±0.3nH 100 500 0.10 max. 12 100 6000 0603
LQG18HN1N5S00 1.5 ±0.3nH 100 500 0.10 max. 12 100 6000 0603
LQG18HN1N8S00 1.8 ±0.3nH 100 500 0.10 max. 12 100 6000 0603
LQG18HN2N2S00 2.2 ±0.3nH 100 500 0.10 max. 12 100 6000 0603
LQG18HN2N7S00 2.7 ±0.3nH 100 500 0.15 max. 12 100 6000 0603
LQG18HN3N3S00 3.3 ±0.3nH 100 500 0.15 max. 12 100 6000 0603
LQG18HN3N9S00 3.9 ±0.3nH 100 450 0.15 max. 12 100 6000 0603
LQG18HN4N7S00 4.7 ±0.3nH 100 450 0.20 max. 12 100 6000 0603
LQG18HN5N6S00 5.6 ±0.3nH 100 430 0.20 max. 12 100 5000 0603
LQG18HN6N8J00 6.8 ±5% 100 430 0.25 max. 12 100 5000 0603
LQG18HN8N2J00 8.2 ±5% 100 400 0.25 max. 12 100 4000 0603
LQG18HN10NJ00 10 ±5% 100 400 0.30 max. 12 100 3500 0603
LQG18HN12NJ00 12 ±5% 100 400 0.35 max. 12 100 3000 0603
LQG18HN15NJ00 15 ±5% 100 350 0.40 max. 12 100 2800 0603
LQG18HN18NJ00 18 ±5% 100 350 0.45 max. 12 100 2600 0603
LQG18HN22NJ00 22 ±5% 100 300 0.50 max. 12 100 2300 0603
LQG18HN27NJ00 27 ±5% 100 300 0.55 max. 12 100 2000 0603
LQG18HN33NJ00 33 ±5% 100 300 0.60 max. 12 100 1700 0603
LQG18HN39NJ00 39 ±5% 100 300 0.65 max. 12 100 1500 0603
LQG18HN47NJ00 47 ±5% 100 300 0.70 max. 12 100 1200 0603
LQG18HN56NJ00 56 ±5% 100 300 0.75 max. 12 100 1100 0603
LQG18HN68NJ00 68 ±5% 100 300 0.80 max. 12 100 1000 0603
LQG18HN82NJ00 82 ±5% 100 300 0.85 max. 12 100 900 0603
LQG18HNR10J00 100 ±5% 100 300 0.90 max. 12 100 800 0603
Operating Temp. Range: -40°C to +85°C
Only for reflow soldering.
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.
!Note O05E13.pdf 05.3.4
12
1
!Note Please read rating and !CAUTION (for storage, operating,