Datasheet Rev. IJ1
Issued 2009/10
www.tycoelectronics.com
www.schrackrelays.com
Dimensions are in mm unless
otherwise specified and are
shown for reference purposes
only.
Product specification
according to IEC 61810-1.
Product data, technical para -
me ters, test conditions and
processing information only
to be used together with the
'Definitions' section in the
cat -
alogue or at schrackrelays.com
in the ‘Schrack’ section.
Specifications subject to
change.
General Purpose Relays SCHRACK
1
Power PCB Relay RT1 Inrush
n1 pole 16 A, 1 CO or 1 NO contact
nFor inrush peak currents up to 80 A
nMono- or bistable coil
n5 kV / 10 mm coil-contact
nReinforced insulation
nAmbient temperature 85°C
Applications
Domestic appliances, heating control, lighting control F0177-C
Approvals
VREG.-Nr. 6106, ZE214025, b14385
Technical data of approved types on request
Contact data
Contact configuration 1 CO or 1 NO
Contact set single contact
Type of interruption micro disconnection
Rated voltage / max. switching voltage AC 250 / 400 VAC
Rated current 16 A
Limiting continuous current 16 A, UL: 20 A (K-version only)
Maximum breaking capacity AC 4000 VA
Limiting making capacity, max 4 s, duty factor 10% 30 A
max 20 ms (incandescent lamps), RT33L version 80 A
Contact material AgNi 90/10, AgSnO2
Rated frequency of operation with / without load 6 / 1200 min-1
Operate- / release time DC coil max 9 / 6 ms
Operate- / reset time bistable max 10 / 10 ms
Bounce time NO / NC contact max 3 / 6 ms
Contact ratings
Type Contact Load Ambient Cycles
temp. [°C]
IEC 61810
RT33L NO 16 A, 250 VAC, cosϕ=1 85°C 50x103
RT33K NO 16 A, 250 VAC, cosϕ=1 85°C 30x103
UL 508
RT33K NO 20 A, 277 VAC, general purpose 40°C 10x103
RT33L NO 16 A, 277 VAC, resistive 85°C 50x103
RT33L NO 1000 W Tungsten, 120 VAC, 60 Hz 40°C 6x103
RT33L NO 1000 W standard ballast,120 VAC, 60 Hz 40°C 6x103
Coil data, DC-coil
Rated coil voltage range 5...110 VDC
Operative range to IEC 61810 2
Coil insulation system according UL1446 class F
Coil versions, DC-coil
Coil Rated Operate Release Coil Rated coil
code voltage voltage voltage resistance power
VDC VDC VDC cmW
005 5 3.5 0.5 62+10% 403
006 6 4.2 0.6 90+10% 400
012 12 8.4 1.2 360+10% 400
024 24 16.8 2.4 1440+10% 400
048 48 33.6 4.8 5520+10% 417
060 60 42.0 6.0 8570+12% 420
All figures are given for coil without preenergization, at ambient temperature +23°C
Other coil voltages on request