DDTA144EKA-7-F - Diodes Incorporated

DDTA (R1 = R2 SERIES) KA

PNP PRE-BIASED SMALL SIGNAL SURF ACE MOUNT TRANSIS TOR

Features

• Epitaxial Planar Die Construction

• Complementary NPN Types Available (DDTC)

• Built-In Biasing Resistors, R1 = R2

• Lead Free/RoHS Compliant (Note 2)

• "Green" Device, Note 3 and 4

Mechanical Data

DS30341 Rev. 8 - 2

1 of 4

www.diodes.com

DDTA (R1 = R2 SERIES) KA

• Case: SC-59

• Case Material: Molded Plastic, "Green" Molding

Compound, Note 4. UL Flammability Classification

Rating 94V-0

• Moisture Sensitivity: Level 1 per J-STD-020C

• Terminals: Solderable per MIL-STD-202, Method 208

• Lead Free Plating (Matte Tin Finish annealed over

Copper leadframe).

• Terminal Connections: See Diagram

• Marking Information: See Table Below & Page 4

• Ordering Information: See Page 4

• Weight: 0.008 grams (approximate)

P/N R1, R2 (NOM) Type Code

DDTA123EKA

DDTA143EKA

DDTA114EKA

DDTA124EKA

DDTA144EKA

DDTA115EKA

2.2KΩ

4.7KΩ

10KΩ

22KΩ

47KΩ

100KΩ

P04

P08

P13

P17

P20

P24

SC-59

Dim Min Max

A 0.35 0.50

B 1.50 1.70

C 2.70 3.00

D 0.95

G 1.90

H 2.90 3.10

J 0.013 0.10

K 1.00 1.30

L 0.35 0.55

M 0.10 0.20

α 0° 8°

All Dimensions in mm

Maximum Ratings @TA = 25°C unless otherwise specified

Characteristic Symbol Value Unit

Supply Voltage, (3) to (2) VCC -50 V

Input Voltage, (1) to (2) DDTA123EKA

DDTA143EKA

DDTA114EKA

DDTA124EKA

DDTA144EKA

DDTA115EKA

VIN

+10 to –12

+10 to –30

+10 to –40

+10 to -40

Output Current DDTA123EKA

DDTA143EKA

DDTA114EKA

DDTA124EKA

DDTA144EKA

DDTA115EKA

-100

-50

-30

-100

-20

Output Current All IC (Max) -100 mA

Power Dissipation Pd200 mW

Thermal Resistance, Junction to Ambient Air (Note 1) RθJA 625 °C/W

Operating and Storage Temperature Range Tj, TSTG -55 to +150 °C

Notes: 1. Mounted on FR4 PC Board with recommended pad layout at http://www.diodes.com/datasheets/ap02001.pdf.

2. No purposefully added lead.

3. Diodes Inc.'s "Green" policy can be found on our website at http://www.diodes.com/products/lead_free/index.php.

4. Product manufactured with Date Code 0627 (week 27, 2006) and newer are built with Green Molding Compound. Product manufactured prior to

Date Code 0627 are built with Non-Green Molding Compound and may contain Halogens or Sb2O3 Fire Retardants.

Schematic and Pin Configuration Equivalent Inverter Circuit

OUT

IN GND(+)

1 3

GND (+)

IN OUT

DS30341 Rev. 8 - 2

2 of 4

www.diodes.com

DDTA (R1 = R2 SERIES) KA

Electrical Characteristics @TA = 25°C unless otherwise specified

Characteristic Symbol Min Typ Max Unit Test Condition

Vl(off) -0.5 -1.1 ⎯ VCC = -5V, IO = -100μA

Input Voltage Vl(on) ⎯ -1.9 -3 V

VO = -0.3V, IO = -20mA, DDTA123EKA

VO = -0.3V, IO = -20mA, DDTA143EKA

VO = -0.3V, IO = -10mA, DDTA114EKA

VO = -0.3V, IO = -5mA, DDTA124EKA

VO = -0.3V, IO = -2mA, DDTA144EKA

VO = -0.3V, IO = -1mA, DDTA115EKA

Output Voltage VO(on) ⎯ -0.1 -0.3 V

IO/Il = -10mA/-0.5mA, DDTA123EKA

IO/Il = -10mA/-0.5mA, DDTA143EKA

IO/Il = -10mA/-0.5mA, DDTA114EKA

IO/Il = -10mA/-0.5mA, DDTA124EKA

IO/Il = -10mA/-0.5mA, DDTA144EKA

IO/Il = -5mA/-0.25mA, DDTA115EKA

Input Current

DDTA123EKA

DDTA143EKA

DDTA114EKA

DDTA124EKA

DDTA144EKA

DDTA115EKA

Il⎯ ⎯

-3.8

-1.8

-0.88

-0.36

-0.18

-0.15

mA VI = -5V

Output Current IO(off) ⎯ ⎯ -0.5 μA VCC = -50V, VI = 0V

DC Current Gain

DDTA123EKA

DDTA143EKA

DDTA114EKA

DDTA124EKA

DDTA144EKA

DDTA115EKA

⎯ ⎯ ⎯

VO = -5V, IO = -20mA

VO = -5V, IO = -10mA

VO = -5V, IO = -5mA

Input Resistor (R1) Tolerance ΔR1-30 ⎯ +30 % ⎯

Resistance Ratio R2/R10.8 1 1.2 ⎯ ⎯

Gain-Bandwidth Product* fT⎯ 250 ⎯ MHz VCE = -10V, IE = 5mA,

f = 100MHz

* Transistor - F o r Refere nce Only

Typical Curves – DDTA143EKA

-50 050100

250

200

150

100

T , AMBIENT TEMPERAT URE ( C)

Fig. 1 Derating Curve

150

DISSI

ATI

(mW)

0.001

0.01

0.1

010 20 30 40 50

LLE

EMI

E (V)

CE(SAT)

I , COLLECTOR CURRENT (mA)

Fig. 2 V vs. I

CE(SAT) C

I/I = 10

-25 C

75 C

25 C

1.000

100

1110

h, D

100

AIN

I , COLLECTOR CURRENT (mA)

Fig. 3 DC Current Gain

020 30

E (p

)

V , REVERSE BIAS VOL TAGE (V)

Fig. 4 Output Capacitance

515 25

f = 1MHz

0.01

0.1

100

012348910

LLE

(mA)

V , INPUT VOL TAGE (V)

Fig. 5 Collector Current vs. Input V o lt age

567

V = 5V

010203040

I , COLLECTOR CURRENT (mA)

Fig. 6 Input Voltage vs. Collector Current

V = 0.2V

V , INPUT VOL TAGE (V)

75 C

DS30341 Rev. 8 - 2

3 of 4

www.diodes.com

DDTA (R1 = R2 SERIES) KA

Ordering Information (Note 4 & 5)

Device Packaging Shipping

DDTA123EKA-7-F SC-59 3000/Tape & Reel

DDTA143EKA-7-F SC-59 3000/Tape & Reel

DDTA114EKA-7-F SC-59 3000/Tape & Reel

DDTA124EKA-7-F SC-59 3000/Tape & Reel

DDTA144EKA-7-F SC-59 3000/Tape & Reel

DDTA115EKA-7-F SC-59 3000/Tape & Reel

Notes: 5. For packaging details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf.

Marking Information

PXX

PXX = Product Type Marking Code, See Table on Page 1

YM = Date Code Marking

Y = Year ex: T = 2006

M = Month ex: 9 = September

Date Code Key

Year 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012

Code N P R S T U V W X Y Z

Month Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec

Code 1 2 3 4 5 6 7 8 9 O N D

IMPORTANT NOTICE

Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes

without further notice to any product herein. Diodes Incorporated does not assume an y liability arising out of the application or use of any product

described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall

assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website,

harmless against all damages. LIFE SUPPORT

Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written

approval of the President of Diodes Incorporated.

DS30341 Rev. 8 - 2

4 of 4

www.diodes.com

DDTA (R1 = R2 SERIES) KA