1N5391 - 1N5399 SILICON RECTIFIERDIODES DO - 41 PRV : 50 - 1000 Volts Io : 1.5 Amperes FEATURES : * * * * * High current capability High surge current capability High reliability Low reverse current Low forward voltage drop 1.00 (25.4) MIN. 0.107 (2.7) 0.080 (2.0) 0.205 (5.2) 0.166 (4.2) MECHANICAL DATA : 1.00 (25.4) MIN. 0.034 (0.86) 0.028 (0.71) * Case : DO-41 Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Axial lead solderable per MIL-STD-202, Method 208 guaranteed * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 0.34 gram Dimensions in inches and ( millimeters ) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. RATING SYMBOL 1N 1N 1N 1N 1N 1N 1N 1N 1N 5391 5392 5393 5394 5395 5396 5397 5398 5399 UNIT Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 300 400 500 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 210 280 350 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 300 400 500 600 800 1000 V Maximum Average Forward Current 0.375"(9.5mm) Lead Length Ta = 70C Peak Forward Surge Current 8.3ms Single half sine wave Superimposed on rated load (JEDEC Method) Maximum Forward Voltage at IF = 1.5 Amps. Maximum DC Reverse Current Ta = 25 C 1.5 A IFSM 50 A VF 1.4 V IR 5.0 A IR(H) 50 A Typical Junction Capacitance (Note1) CJ 15 pF Typical Thermal Resistance (Note2) RJA 26 C/W Junction Temperature Range TJ - 65 to + 175 C Storage Temperature Range TSTG - 65 to + 175 C at rated DC Blocking Voltage Ta = 100 C IF Notes : (1) Measured at 1.0 MHz and applied reverse voltage of 4.0VDC (2) Thermal resistance from Junction to Ambient at 0.375" (9.5mm) Lead Lengths, P.C. Board Mounted. Page 1 of 2 Rev. 01 : Mar 23, 2002 RATING AND CHARACTERISTIC CURVES ( 1N5391 - 1N5399 ) FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 50 1.5 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT, AMPERES FIG.1 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 1.2 0.9 0.6 0.3 Ta = 25 C 40 30 20 10 0 0 0 25 50 75 100 125 150 175 1 AMBIENT TEMPERATURE, ( C) 4 6 10 20 40 60 100 FIG.4 - TYPICAL REVERSE CHARACTERISTICS 10 10 REVERSE CURRENT, MICROAMPERES FORWARD CURRENT, AMPERES FIG.3 - TYPICAL FORWARD CHARACTERISTICS 1.0 Pulse Width = 300 s 2% Duty Cycle 0.1 TJ = 25 C 0.01 Ta = 100 C 1.0 0.1 Ta = 25 C 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 FORWARD VOLTAGE, VOLTS Page 2 of 2 2 NUMBER OF CYCLES AT 60Hz 1.8 2.0 0 20 40 60 80 100 120 140 PERCENT OF RATED REVERSE VOLTAGE, (%) Rev. 01 : Mar 23, 2002