(2,54mm) .100"
IDSS, IDSD, IDMS, IDMD SERIES
IDMD–24–S–12.00–G
WWW.SAMTEC.COM
IDSS, IDSD
For complete specifi cations
see www.samtec.com?IDSS
or www.samtec.com?IDSD
Insulator Material:
Black Glass Filled
Polyester
Plating:
Au over 50µ" (1,27µm) Ni or
Sn over 100µ" (2,54µm) Cu or
50µ" (1,27µm) Ni
Wire:
28 AWG 7/36 stranded Tinned
Copper
Temperature Range:
-20°C to +105°C
(Rainbow Cable)
-40°C to +105°C
(Gray Cable)
Contact:
BeCu
Current Rating:
1A
Contact Resistance:
15 mΩ max delta from initial
Lead Size Range:
(0,56mm) .022" SQ to
(0,71mm) .028" SQ
Lead Insertion Depth:
(5,59mm) .220" to
(6,22mm) .245"
Insertion Force:
(Single contact only)
4oz avg.
((0,64mm) .025" SQ probe)
Withdrawal Force:
(Single contact only)
3oz avg.
((0,64mm) .025" SQ probe)
RoHS Compliant: Ye s
DOUBLE
Full size (72 positions):
(92,71) 3.650
Less than 72 positions:
No. Positions/row x (2,54) .100 + (1,50) .059
SINGLE
Full size (36 positions):
(91,69) 3.610
Less than 36 positions:
No. Positions/row x (2,54) .100 + (0,48) .019
(2,54)
.100
(0,76)
.030
SQ
(9,27)
.365
REF
(5,08)
.200
(2,54)
.100
END
AS SEM BLY
ROW
OPTION
NO. PINS
PER ROW
TYPE
STRIP
–02 thru –32
–02 thru –36
IDM
= Standard Tail Male Plug
IDS
= Socket
Mates with:
TSW, MTSW,
TSM, EJH, PHT
IDSD Mates with:
TST, HTST, ZST
IDMD
(Double)
S
= Single
D
= Double
(Color coded
cable N/A for
31 thru 36
pins/row.
See –G
option.)
IDMS
(Single)
IDSD
(Double)
IDSS
(Single)
Socket or Male Plug on one end
Male Plug on one end with socket on
other. Begin part number with IDM.
–T =Transfer
End
Note:
This Series is non-standard,
non-returnable.
(0,48)
.019
DOUBLE
Full size (64 positions):
(82,55) 3.250
Less than 64 positions:
No. Positions/row X (2,54) .100 + (1,68) .066
SINGLE
Full size (32 positions):
(81,53) 3.210
Less than 32 positions:
No. Positions/row X (2,54) .100 + (0,71) .028
(0,46)
.018
x
(0,48)
.019
(2,54)
.100
(2,54)
.100
(2,54)
.100
(5,08)
.200
(6,10)
.240
MAX
(3,18)
.125
(For square or long tail see HCMX Series)
SPECIFICATIONS
IDMS, IDMD
For complete specifi cations
see www.samtec.com?IDMS
or www.samtec.com?IDMD
Insulator Material:
Black Glass Filled
Polyester
Plating:
Au over 50µ" (1,27µm) Ni or
Sn over 100µ" (2,54µm) Cu
or 50µ" (1,27µm) Ni
Wire:
28 AWG 7/36 stranded
Tinned Copper
Temperature Range:
-20°C to +105°C
(Rainbow Cable)
-40°C to +105°C
(Gray Cable)
Terminal:
Phosphor Bronze
Current Rating:
1A
RoHS Compliant:
Ye s
SPECIFICATIONS
–S =Single
End
–D =Double
End
Socket or Male Plug on each end
SLIM BODY FLAT RIBBON IDC CABLES
ALSO AVAILABLE
Molded-To-Position
IDC Assemblies
• Low Profi le
• Skinny side locks
• Dual beam contacts
• Single and double row
• (6,35mm) .025"
square and
(5,84mm) .230"
length tail
available
Call
Samtec
for HCXX
Series.
•
(6
,
35
mm)
.
025
square and
(
5,84mm) .230"
length tail
ava
ilabl
e
Ca
ll
S
amtec
for H
C
XX
S
eries
.
F-212
IDSD–24–S–05.00
IDSD–05–D–04.25–S02
WWW.SAMTEC.COM
EJECTOR HEADERS
& LOCKING CLIPS
See EJH Series.
LOCKING
CLIP
PC
BOARD
IDSS or IDSD
STRIP ASSEMBLY
.025" SQ
TERMINAL
STRIP (TSW)
See TSW Series.
When mating double row
connector with two single row
connectors, the outer most
single will be connected to
Conductor #1 and the inside
single to Conductor #2.
1/8" (3,18)
1/4" (6,35)
1/2" (12,70)
3/8" (9,53)
–ST8
–ST4
–ST2
–ST3
“XX”
5"max.
2"min.
–O
= Outside Reversed
OPTION
ASSEMBLED
LENGTH
–T
–C
–A
–P “XX”
=Polarized
–R
= Reversed
–D “XX”
= Daisy Chain, Double
–W “XX”
= Wiring Reversed
Daisy Chain, Single
–ST “X”
= Stripped & Tinned –S “XX”
= Daisy Chain Single
–G
= Gray Cable
1
2
3
Specify –G for Gray cable. Gray
cable has one red edge. IDSS
and IDMS uses .100" centerline
cable. IDSD and IDMD uses
.050" centerline cable. Cable is
28 AWG 7/36 copper wire.
Standard cable is same as
above except color coded.
Specify “XX” as position. For
Double the same position will
be polarized on both ends.
(Not available on IDM or EDM,
unless transfer, then only the
socket is polarized.)
Standard plating is selective
gold over BeCu contact for IDS;
Selective gold over phosphor
bronze for IDM.
Same as –S “XX” except outer
strip connected to Conductor
#2 and inside strip connected
to Conductor #1.
7
7
7
0204
0103
72
71
Assembled Length in
INCHES (±
1
/
8
" )
(2 inches minimum)
Specify Suffi x from table.
All dimensions are ± 1/16".
Not available in 28 positions and higher.
4
–B “XX”
= Breakout
Specify “XX” as number of
conductors to be broken out.
Breakout starts with Number 1
lead indicated by brown wire or
red stripe. Shown on top side. 5
–RW
= Reversed Wiring
#1 wire opposite position #1.
8
–M
= Middle Reversed
8
Requires –SXX, –WXX or –DXX
Requires –SXX, –WXX or –DXX
8
6
2"
min.
4" minimum
“XX” ± 1⁄8"
Single Row
Connectors
(IDSS)
Outer Most
2"
min.
4" minimum
“XX” ± 1⁄8"
Double Row
Connectors
(IDSD or
IDMD)
Outer Most
Optional polarizing key for
use with IDSS & IDSD
Series. Also polarizes
SSW, SSQ, ESW & ESQ
Series. Black High
Temperature Ther mo plas tic
Order: Part Number PK-01-06
(Available in wheels of six each)
–R
= Reversed
(5,84)
.230
(0,64) .025
SQ
= Tin Plating
(Both ends)
=
Tin IDM
10µ" (0,25µm) Gold IDS
(-T End Assembly Required)
=
10µ" (0,25µm) Gold IDM
Tin IDS
(-T End Assembly Required)
– “XX.XX”
= Assembled Length POLARIZING KEY
• Ejector headers
• Locking clips
