AMW106-3.2.0R - SILICON LABS - Datasheet.Directory

Zentri AMW006 / AMW106

Data Sheet

AMWx06 Datasheet

ADS-MWx06-109R AMWx06 Datasheet Page |ii

Disclaimer

While the information provided in this document is

believed to be accurate, it is under development and

Zentri reserves the right to make changes without

further notice to the product described herein to

improve reliability, function, or design, and makes no

guarantee or warranty concerning the accuracy of said

information, nor shall it be responsible for any loss or

damage of whatever nature resulting from the use of,

or reliance upon, such information. Zentri makes no

warranties of any kind, whether express, implied or

arising by custom or course of trade or performance,

and specifically disclaims the implied warranties of title,

non-infringement, merchantability, or fitness for a

particular purpose.

No part of this document may be copied, reproduced,

stored in a retrieval system, or transmitted, in any form

or by any means, electronic, mechanical, photographic,

or otherwise, or used as the basis for manufacture or

sale of any items without the prior written consent of

Zentri.

Trademarks

Zentri and the Zentri logo are trademarks of Zentri.

Other trademarks in this document belong to their

respective owners.

Document Number: ADS-MWx06-109R

Release Date: May 18, 2017

Contact

https://www.zentri.com/contact-us/

About this User Guide

This document provides information on the

AMWx06 802.11b/g/n Wi-Fi networking module from

Zentri.

Modules covered by this datasheet include:

AMWx06 Rev 6

Further information about ZentriOS is available from:

http://docs.zentri.com

Organization

This document is organized into the following sections:

1 General Description .............................................. 1

2 Block Diagram ....................................................... 2

3 Electrical Specifications ......................................... 3

4 WLAN RF Specifications......................................... 5

5 Pinout and Signal Descriptions .............................. 7

6 Design Guidelines .................................................. 9

7 Regulatory Certification ...................................... 15

8 Packaging, Handling and Storage, RoHS ............. 22

9 Ordering Information .......................................... 25

10 Revision History & Glossary ......................... 26

11 References ................................................... 27

AMWx06 Datasheet

ADS-MWx06-109R AMWx06 Datasheet Page |iii

Features

Self-contained ultra-low power Wi-Fi module with

microcontroller and support for ZentriOS-W

firmware (AMW006/AMW106) and ZentriOS-WZ

firmware (AMW106), including industry standard

SSL/TLS secure TCP/IP network stack.

Integrated SPI-serial flash for software upgrades

and user accessible read/write file system

Wi-Fi

Cypress single band 2.4GHz IEEE 802.11b/g/n 1x1

Wi-Fi transceiver

Includes support for all Wi-Fi security modes

including Open, WEP, WPA, and WPA2-PSK

Microprocessor

ARM Cortex® M4 based microprocessor

AMW006: operates up to 84MHz core frequency

AMW106: operates up to 100MHz core frequency

RAM

AMW006: 96 KB

AMW106: 128 KB

Interfaces*

UART: 2 x 4-wire up to 10.5Mbit/s

SPI : SPI-Master (42Mbit/s), SPI-Slave (21Mbit/s)

GPIO: Up to 21 GPIOs (overlaid with peripherals)

A/D converter: 9 channel input, 12-bit resolution,

2.4MSPS sampling in single-shot or scan mode

PWM: Up to 14 PWM outputs

Wake-up: Wake pin for ultra-low power operation

Two external antennas for diversity and improved

range

*Some interfaces share module pins

Operational & Radio

Single operating voltage : 3.3V (typical)

All I/O pins are +5V tolerant

Operational Temperature Range: -30°C to +85°C

Size : 20.3 x 15.2 x 2.7mm (0.80” x 0.60” x 0.11”)

Weight : 0.07 oz (2g)

Current consumption @ 3.3V, 25°C

- VBAT : 0.97µA (with 32k RTC)

- Standby : 2.8µA (3.8uA with 32k RTC)

- Stop : 10µA with RAM retention (113µs wake)

- Wi-Fi Powersave : 0.77mA (DTIM = 3)

- Active receive : 5.7mA @ 1Mbit/s UDP

Active transmit : 11.4mA @ 1Mbit/s UDP

Maximum RF transmit power

- 802.11b/g : +18 dBm

- 802.11n : +14 dBm

Minimum Receive sensitivity

- 802.11b/g : -94 dBm

- 802.11n : -86 dBm

Sustained TCP throughput : 10 Mbit/s

Applications

Industrial, M2M and Home Automation

- Environmental monitoring

- Energy monitoring

- Wireless sensing, remote data logging

- HVAC, power, light, & thermostat control

- Appliance control

Security

- Cameras, Doors/Window monitoring

- Alarms, Smoke Detectors

- Door and entry control

Health & Fitness

- Fitness Equipment

- Home health monitoring e.g. weight scales

Consumer

- Audio, Toys, Robots

AMWx06 Datasheet

ADS-MWx06-109R AMWx06 Datasheet Page |iv

ZentriOS-W/ZentriOS-WZ Firmware Features

The ZentriOS-W/ZentriOS-WZ firmware supplied with

the AMWx06 provides a wide range of features beyond

the underlying hardware, and supports application

development via its command API.

For complete documentation of ZentriOS-W, see:

https://docs.zentri.com/zentrios/w/latest/

The AMW106 supports ZentriOS-WZ firmware, which

adds support for developing ZentriOS apps (ZAPs).

For complete documentation of ZentriOS-WZ, see:

https://docs.zentri.com/zentrios/wz/latest/

Software APIs

 ZentriOS-W command API

 ZentriOS-WZ command API

 ZentriOS-WZ SDK and native API

Interfaces

 Serial (UART, remote terminal)

 SoftAP and WLAN client (concurrent)

 I2C master

 SPI master

Servers

 TCP/TLS, UDP, HTTP(S), DHCP, DNS

 HTTP(S) Server with RESTful API and

Websockets

 Fully customizable mobile responsive Web

application with JavaScript and Python libraries

Clients

 TCP/TLS, UDP, NTP, Secure-SMTP, DHCP, DNS

 HTTP(S) client

 Websocket client

Setup

 Multiple Wi-Fi setup options, including via serial

command and Web setup with SoftAP

Peripherals and Sensors

 GPIOs for control, indication and monitoring

 I2C-master API for interfacing to external

peripherals

 SPI-master API for interfacing to external

peripherals

 Automated broadcast and streaming of sensor

data

 Local caching of sensor data

Update and Recovery

Wireless OTA (Over-the-Air) update to remote

manage firmware using the Zentri DMS (Device

Management Service)

System Management

 System configuration and monitoring via setting

and getting a wide range of variables

 Configurable power states

Sleep/wake timers

File System

 Read/write file system with appendable log

files

 Storage of large files

 Optional additional bulk serial flash

 HTTP download to file system, HTTP upload

from file system

AMWx06 Datasheet

ADS-MWx06-109R AMWx06 Datasheet Page |v

Contents

1 General Description .............................................. 1

2 Block Diagram ....................................................... 2

3 Electrical Specifications ......................................... 3

3.1 Absolute Maximum Ratings ................... 3

3.2 Recommended Operating Conditions ... 3

3.2.1 DC Operating Conditions ................ 3

3.2.2 Environmental Conditions .............. 4

3.3 Power Consumption .............................. 4

3.4 32kHz Crystal ......................................... 4

4 WLAN RF Specifications ........................................ 5

4.1 Summary WLAN Specifications .............. 5

4.2 WLAN Receiver Specifications ............... 5

4.3 WLAN Transmitter Specifications .......... 6

5 Pinout and Signal Descriptions ............................. 7

5.1 Pinout ..................................................... 7

5.2 Pin Description ....................................... 7

6 Design Guidelines .................................................. 9

6.1 Recommended PCB Footprint ............... 9

6.2 Routing Recommendations ................. 10

6.3 Soldering Information .......................... 11

6.4 Module Photograph ............................. 12

6.5 External Antennas ................................ 12

6.5.1 PCB Trace Antenna ....................... 12

6.5.2 Wire Antenna ............................... 12

1.1.1 Chip Antenna ................................ 12

6.5.3 Monopole Antenna ...................... 13

6.6 Application Examples ........................... 14

6.6.1 Operation using ZentriOS ............. 14

7 Regulatory Certification ...................................... 15

7.1 United States ....................................... 15

7.1.1 Labeling and User Information

Requirements ............................................. 15

7.1.2 RF Exposure .................................. 16

7.1.3 Approved External Antenna Types

16

7.1.4 Further Information ..................... 16

7.2 Canada ................................................. 17

7.2.1 Labeling and User Information

Requirements.............................................. 17

7.2.2 External Antenna Types................ 18

7.2.3 Further Information ..................... 18

7.3 Europe .................................................. 18

7.3.1 Labeling and User Information

Requirements.............................................. 19

7.3.1 External Antenna Requirements .. 19

7.3.2 Further Information ..................... 19

7.4 Australia ............................................... 20

7.4.1 External Antenna Requirements .. 20

7.4.2 Further Information ..................... 20

7.5 New Zealand ........................................ 20

7.5.1 External Antenna Requirements .. 20

7.5.2 Further Information ..................... 21

7.6 Japan .................................................... 21

8 Packaging, Handling and Storage, RoHS ............. 22

8.1 Packaging ............................................. 22

8.2 Handling & Storage .............................. 22

8.3 RoHS Directive ..................................... 22

8.4 Tape and Reel Specifications ............... 23

8.5 Cut Tape and Reel Quantity ................. 24

9 Ordering Information .......................................... 25

9.1 Ordering an Unspecified ZentriOS

Version 25

9.2 Ordering a Specific ZentriOS Version or a

Custom Firmware Version .................................. 25

10 Revision History & Glossary ......................... 26

10.1 Revision History ................................... 26

10.2 Glossary ................................................ 26

11 References ................................................... 27

AMWx06 Datasheet

ADS-MWx06-109R AMWx06 Datasheet Page |vi

General Description

ADS-MWx06-109R AMWx06 Datasheet Page |1

1 General Description

The AMW006 and AMW106 modules from Zentri

combine a microcontroller with a BCM43362 Wi-Fi

device to provide an advanced stand-alone Wi-Fi and

networking solution.

The term AMWx06 refers to both modules.

An integrated module avoids difficult RF layout and

enables designers to rapidly embed Wi-Fi and secure

networking functionality into virtually any device.

The ZentriOS serial-to-Wi-Fi application, pre-

programmed into all modules, may be used to fast-

track module integration into end-products.

With dimensions of just 20.3mm x 15.2mm and a wide

temperature range, the module is suitable for

integration into most embedded applications.

The Wi-Fi device from Cypress includes an integrated

RF transmit power amplifier and provides superior

Wi-Fi performance and full compatibility with all

2.4GHz 802.11b/g/n Wi-Fi networks. Connections for

two external antennas provide applications with

maximum radio range and mechanical design

flexibility.

The microprocessor is based on a high-performance

ARM® 32-bit Cortex™-M4.

The AMW006/AMW106 microcontroller core operates

at a frequency up to 84/100MHz providing up to 125

DMIPS or 1.25 DMIPS/MHz (Dhrystone 2.1).

The AMW006 has 96KB of RAM.

The AMW106 has 128KB of RAM.

The AMWx06 module offers extensive I/O and

peripheral interfaces listed below, and provides

additional interface combinations by leveraging

multiplexing and alternate function capabilities.

2 x 4-Wire UART interfaces

2 x SPI interfaces (1 master, 1 slave)

21 x GPIOs

9 x 12-bit A/D converters

14 x PWM outputs

1 x ultra-low power wake input

The module is powered by a 3.3V power supply, a

separate WLAN power supply pin is provided to

minimize noise coupling into the WLAN subsystem.

Various powersave modes offer ultra-low power

operation. Wake from low power sleep mode is

possible using IO pins or the internal real-time clock,

and wake from ultra-low power standby mode is

achieved using the dedicated wake pin.

The module incorporates a 32.768kHz crystal to

maintain an accurate real time clock. A 32kHz clock

output is available on a dedicated module pin in both

active power save modes. The 32kHz clock output may

be used to drive the clock input of other system devices.

This avoids the need for an additional crystal thereby

minimizing total system cost.

The module has FCC & IC modular approval for use in

the United States and Canada, CE approval for use in

Europe, TELEC/MIC approval for use in Japan and

related approvals for use in other countries.

Block Diagram

ADS-MWx06-109R AMWx06 Datasheet Page |2

2 Block Diagram

Figure 1 is a block diagram of the AMWx06 module. The

main components of the module are a microprocessor

and BCM43362 Wi-Fi System-on-Chip (SoC). The

processor and peripherals are driven by a 26MHz

crystal. The integrated real-time clock (RTC) is driven by

a 32.768kHz crystal. An on-board 1MByte serial flash

chip may be used to store user data and configuration,

additional applications, and firmware images as part of

the Zentri secure over the air (OTA) update process.

The WLAN subsystem is controlled by ZentriOS enabling

the module to achieve minimum power consumption

when the Wi-Fi networking interface is not required.

The module includes an antenna diversity switch. The

switch enables static or dynamic control of the external

antenna(s).

Figure 1. AMW006 / AMW106 Architecture

Antenna

Switch

VBAT

3v3 MCU

3v3 Wi-Fi

32kHz Out

ADC

PWM

UART

SPI

GPIO

Reset

ARM

Cortex M4

BCM43362

Wi-Fi

26MHz

32kHz

1 MByte

Serial Flash

AMW006 / AMW106

Antenna 1

Antenna 2

Electrical Specifications

ADS-MWx06-109R AMWx06 Datasheet Page |3

3 Electrical Specifications

3.1 Absolute Maximum Ratings

CAUTION! The absolute maximum ratings in Table 1 and Table 2 indicate levels where permanent damage to the device

can occur, even if these limits are exceeded for only a brief duration. Functional operation is not guaranteed under

these conditions. Operation at absolute maximum conditions for extended periods can adversely affect long-term

reliability of the device.

The values in Table 1 reflect absolute maximum ratings from the respective microprocessor and BCM43362 datasheets.

Table 1. Absolute Maximum Voltage Ratings

Symbol

Ratings

Min

Max

Unit

VBAT

External power supply voltage to MCU VBAT pin

-0.3

4.0

V

VDD_3V3

External power supply voltage to MCU subsystem

-0.3

4.0

VDD_WIFI

External power supply voltage to WLAN subsystem

-0.5

6.0

Vin

Input voltage on any other MCU pin

GND - 0.3

VDD_3V3 + 4.0

Table 2. Absolute Maximum Environmental Ratings

Characteristic

Note

Min

Max

Unit

Storage Temperature

–

-40

+125

°C

Relative Humidity

Non-condensing (storage)

–

65

%

3.2 Recommended Operating Conditions

Functional operation is not guaranteed outside the limits shown in Table 3 and Table 4, and operation outside these

limits for extended periods can adversely affect long-term reliability of the device.

3.2.1 DC Operating Conditions

Table 3. Recommended DC Operating Conditions

Symbol

Ratings

Min

Typ

Max

Unit

VBAT

External power supply voltage to MCU VBAT pin

3.0

3.3

3.6

V

VDD_3V31

External power supply voltage to MCU subsystem

3.0

3.3

3.6

VDD_WIFI1,2

External power supply voltage to WLAN subsystem

3.0

3.3

3.6

Notes:

1. VDD_3V3 and VDD_WIFI must be at the same voltage when using the Wi-Fi subsystem

2. The performance of the Wi-Fi subsystem is degraded significantly at low voltages

Electrical Specifications

ADS-MWx06-109R AMWx06 Datasheet Page |4

3.2.2 Environmental Conditions

Table 4. Recommended Environmental Conditions

Characteristic

Note

Min

Max

Unit

Ambient Temperature

Limited by WLAN chip specification

-30

+85

°C

Relative Humidity

Non-condensing (operating)

–

85

%

3.3 Power Consumption

Table 5. Power consumption (VDD_3V3, VDD_WIFI, VBAT @ 3.3V)

Operational State

Note

Typ1

Max1

Unit

TA =

25°C

TA =

85°C

VBAT7

MCU VBAT Mode, RTC on, Wi-Fi powered off

0.97

–

3.0

µA

Standby7

MCU Standby Mode, RTC on, Wi-Fi powered off

3.8

5.0

17.0

µA

Stop3, 7

MCU Stop Mode, Wi-Fi powered off

10

28

230

µA

Wi-Fi Powersave2,3

MCU Stop mode, Wi-Fi in powersave

0.77

–

mA

Active Receive2,3,4

MCU Stop mode, Wi-Fi active receive

5.7

–

mA

Active Transmit2,3,5

MCU Stop mode, Wi-Fi active transmit

11.4

–

mA

Wi-Fi Tx Test Mode6

MCU Stop mode, Wi-Fi active transmit

–

320

–

mA

Notes:

1. Total combined current consumed by all power supplies: VBAT, VDD_3V3, VDD_WIFI.

2. 802.11 beacon Interval = 102.4ms, DTIM=3, Beacon Duration = 1ms @ 1Mbps.

3. MCU Stop Mode with 113µs wakeup latency (flash in deep power down mode), VDD_WIFI = 0V

4. Average current receiving 1Mbit/s UDP at 802.11n MCS7

5. Average current transmitting 1Mbit/s UDP at 802.11n MCS7

6. Wi-Fi Transmitting at +18dBm CCK 11Mbit/s with maximum duty cycle

7. Hardware capability; minimum power consumption is dependent on ZentriOS version and external components

connected to AMWx06 pins

3.4 32kHz Crystal

Table 6. 32kHz Crystal Specifications1

Operational State

Note

Min

Typical

Max

Unit

Frequency

–

32768

–

Hz

Frequency Tolerance

–

20

–

ppm

Frequency Ageing

Measured @25°C ±3°C

-3

–

+3

ppm

Notes:

WLAN RF Specifications

ADS-MWx06-109R AMWx06 Datasheet Page |5

1. Reproduced from manufacturer’s datasheet.

4 WLAN RF Specifications

The AMWx06 WLAN radio specifications are derived from the Cypress CYW43362 WLAN radio specifications.

Unless otherwise stated, the specifications in this section apply when the operating conditions are within the limits

specified in Section 3.2, Recommended Operating Conditions. Functional operation outside these limits is not

guaranteed.

All specifications are measured by connecting directly to either of the antenna ports via a short PCB trace with the

other antenna port terminated in 50 ohms.

4.1 Summary WLAN Specifications

Table 7. Summary WLAN Specifications

Feature Supported

Description

WLAN Standard

IEEE 802.11b/g/n 1x1 SISO

Frequency Band

2.400 GHz – 2.484 GHz

WLAN Channels

Channels 1 – 13

Data Rates

802.11b (1, 2, 5.5, 11 Mbps)

802.11g (6, 9, 12, 24, 36, 48, 54 Mbps)

802.11n (HT20 MCS0-MCS7)

Maximum Receive level

@ 2.4GHz

-2.5 dBm @ 1, 2 Mbps (8% PER, 1024 octets)

-8.5 dBm @ 5.5, 11 Mbps (8% PER, 1024 Octets)

-12 dBm @ 6-54 Mbps (10% PER, 1000 Octets)

Maximum RF Tx Output Power

+18 dBm @ 802.11b (EVM < -9 dB)

+14 dBm @ 802.11n MCS7 (EVM < -28 dB)

Carrier Frequency Accuracy

±20 ppm (26MHz crystal with ±10 ppm @ 25C)

4.2 WLAN Receiver Specifications

Table 8. WLAN Receiver Performance Specifications

Parameter

Condition/Notes

Min

Typical

Max

Unit

Frequency Range

–

2400

–

2500

MHz

Operating Temperature1

–

-30

–

+85

°C

Receive Sensitivity2

(8% PER for 1024 octet PSDU)

at either antenna port3

1 Mbps DSSS

–

-94

-91

dBm

11 Mbps CCK

–

-87

-83

Receive Sensitivity2

(10% PER for 1000 octet

PSDU) at either antenna port3

6 Mbps OFDM

–

-86

-81

dBm

54 Mbps OFDM

–

-73

-69

WLAN RF Specifications

ADS-MWx06-109R AMWx06 Datasheet Page |6

Parameter

Condition/Notes

Min

Typical

Max

Unit

Receive Sensitivity2

(10% PER for 4096 octet

PSDU) at either antenna port3.

Defined for default

parameters: GF, 800ns GI, and

non-STBC

65 Mbps MCS0, HT20

–

-86

-81

dBm

65 Mbps MCS7, HT20

–

-70

-65

Max. Receive Level @ 2.4GHz

@ 1, 2 Mbps (8% PER, 1024 octets)

-2

–

dBm

@ 5.5, 11 Mbps (8% PER, 1024 Octets)

-8

–

@ 6-54 Mbps (10% PER, 1000 Octets)

-11.5

–

Notes:

1. Operation below -20°C and above +65°C with parameter derating per Note 2

2. Derate receive sensitivity by 1.5dB for operation between temperatures of -30°C to -20°C and 65°C to 85°C

3. All measurements performed with the other antenna port terminated in 50 ohms

4.3 WLAN Transmitter Specifications

Table 9. WLAN Transmitter Performance Specifications

Parameter

Condition/Notes

Min

Typical

Max

Unit

Frequency Range

–

2400

–

2500

MHz

Operating Temperature1

–

-30

–

+85

°C

Transmit power2 measured at

either antenna port3 for

highest power level setting at

25°C, VDD-3V3_RF_IN=3.3V

with spectral mask and EVM

compliance

EVM does NOT exceed :

1 Mbps DSSS

-11 dB

+14

+16

+18

dBm

11 Mbps CCK

-11 dB

+14

+16

+18

6 Mbps OFDM

-22 dB

+12

+14

+16

54 Mbps OFDM

-25 dB

+12

+14

+16

MCS0, HT20

-22 dB

+10

+12

+14

MCS7, HT20

-28 dB

+10

+12

+14

Notes:

1. Operation below -20°C and above +65°C with parameter derating per Note 2

2. Derate transmit power by 1.5dB for operation between temperatures of -30°C to -20°C and 65°C to 85°C

3. All measurements performed with the other antenna port terminated in 50 ohms

Pinout and Signal Descriptions

ADS-MWx06-109R AMWx06 Datasheet Page |7

5 Pinout and Signal Descriptions

5.1 Pinout

A top view of the AMWx06 pinout is depicted in Error! Reference source not found.. All dimensions are in thousands

of an inch. A recommended footprint is provided in Section 6.1.

The module orientation can be determined from antenna pins 47 and 43, which show as notches in surrounding

soldered ground pins.

Figure 2 – AMWx06 pin out.

Determine module orientation from antenna pins 47 and 43, which show as notches in surrounding soldered ground pins

5.2 Pin Description

Table 10. AMWx06 ZentriOS Pin Definitions

Name

Type1

Primary Function

Alternate & Other Function(s)

1-2

GND

S

Ground

-

3

VBAT

S

VBAT MCU supply

-

4

GPIO_0

I/O

Factory Reset2

SPI1_MISO (S), GPIO

5

GPIO_1

I/O

GPIO

-

6

GPIO_2

I/O

GPIO

SPI1_SCK (S)

7

GPIO_3

I/O

GPIO

SPI1_CS (S)

8

GPIO_4

I/O

GPIO

-

Pin 1

Pin 47

Pin 43

Pinout and Signal Descriptions

ADS-MWx06-109R AMWx06 Datasheet Page |8

Name

Type1

Primary Function

Alternate & Other Function(s)

9

OSC_32K_OUT

O

OSC_32K_OUT

-

10

VDD_3V3

I/O

3.3V MCU supply

11-12

GND

S

Ground

-

13

GPIO_5

I/O

GPIO

SPI1_MOSI (slave), PWM5

14

GPIO_6

I/O

SPI0_MISO (M) 5

ADC6 (when SPI not in use).

Not available for digital I/O.

15

GPIO_7

I/O

SPI0_SCK (M) 5

ADC5 (when SPI not in use).

Not available for digital I/O.

16

GPIO_8

I/O

SPI0_MOSI (M) 5

ADC7 (when SPI not in use).

Not available for digital I/O.

17

GPIO_9

I/O

GPIO

UART0_RTS

18

GPIO_10

I/O

GPIO

UART0_CTS, PWM0

19

GPIO_11

I/O

UART0_RX

GPIO, PWM0

20

GPIO_12

I/O

UART0_TX

GPIO, PWM0

21

GPIO_13

I/O

GPIO

PWM1

22

GPIO_14

I/O

GPIO

PWM3

23

GPIO_15

I/O

GPIO

PWM3

24

GPIO_16

I/O

GPIO

PWM6

25

GPIO_17

I/O

GPIO

UART1_RX, ADC3, PWM4

26-27

GND

I/O

Ground

-

28

GPIO_18

I/O

GPIO

-

29

GPIO_19

I/O

GPIO

UART1_TX, ADC2, PWM4

30

GPIO_20

I/O

GPIO

ADC9, PWM2

31

GPIO_21

I/O

GPIO

ADC8, PWM2

32

GPIO_22

I/O

GPIO

UART1_CTS, WAKE, ADC0, PWM1

33

GPIO_23

I/O

GPIO

UART1_RTS, ADC1, PWM4

34

RESET_N

I

System Reset4

35

VDD_WIFI

S

3.3V WLAN supply

-

36-42

GND

S

Ground

-

43

ANTENNA_1

O

Wi-Fi Antenna3

-

44-46

GND

S

Ground

-

47

ANTENNA_2

O

Wi-Fi Antenna3

-

Design Guidelines

ADS-MWx06-109R AMWx06 Datasheet Page |9

Name

Type1

Primary Function

Alternate & Other Function(s)

48-52

GND

S

Ground

-

Notes:

1. I = Input, O = Output, S = Supply

2. Factory reset is sampled at power-on-reset and available for other purposes thereafter.

3. Wi-Fi Antenna pins are AC-coupled and have a nominal 50 ohms output impedance.

4. The module Reset pin is connected to the internal MCU via a 1k resistor.

We recommend driving the pin. If the pin is not driven, connect a 0.1uF capacitor to ground close to the pin to

bypass noise which may cause unintended reset.

5. Connected to SPI serial flash inside the module.

6 Design Guidelines

6.1 Recommended PCB Footprint

All dimensions in Figure 3 are in thousands of an inch unless otherwise marked.

Figure 3. AMWx06 Recommended Footprint (Top)

Design Guidelines

ADS-MWx06-109R AMWx06 Datasheet Page |10

6.2 Routing Recommendations

When designing a carrier board, the addition of ground fill directly underneath the AMWx06 module, rather than signal

or power traces, is recommended. If traces must be routed directly beneath the module, avoid routing directly

underneath keepout areas shown in Figure 4 (ground fill is ok). All ground pads adjacent to antenna pins must be

connected to a solid ground plane. Failure to comply with these recommendations may result in degraded performance

of WLAN functionality.

Figure 4. AMWx06 Keepouts (TOP VIEW)

Design Guidelines

ADS-MWx06-109R AMWx06 Datasheet Page |11

6.3 Soldering Information

Figure 5 - Recommended solder reflow profile

Figure 6 - Example solder reflow profile (AMW006-E03 evaluation board)

Note: Zentri recommends a “No-Clean” soldering process to avoid getting contaminants under the shield cans.

Design Guidelines

ADS-MWx06-109R AMWx06 Datasheet Page |12

6.4 Module Photograph

Figure 7. AMW006 Photograph (Top)

6.5 External Antennas

The AMWx06 module supports two external antennas

and per-packet antenna diversity to achieve maximum

range. Antenna selection is available by setting

ZentriOS variables.

NOTE! BOTH antenna ports must be terminated in 50

ohms. If a single antenna is used, the other antenna

port should be terminated with a 50 ohm load. Failure

to terminate both antenna ports may result in

degraded radio performance.

Table 11 - Tested External Antenna Types

Model

Type1

Gain (dBi)

Printed antenna

PCB trace

3.2

Wire

Monopole

2.1

Johanson Tech.

2450AT42A100E

Chip

0.0

ACA-1SRPP-2400

Monopole

0.6

ACA-4HSRPP-

2458

Monopole

1.0

(1) An antenna type comprises antennas having similar

in-band and out-of-band radiation patterns.

6.5.1 PCB Trace Antenna

This 2.4 GHz PCB antenna can fit in an area smaller than

21mm x 10mm, and as small as 15mm x 6mm. To

achieve optimum performance, make an exact copy of

this reference design.

Figure 8 - Trace Antenna (dimensions in mm)

6.5.2 Wire Antenna

A suitable wire antenna is an 18-gauge wire with a

length of 25.4mm ± 2mm. The wire antennas should be

perpendicular to each other, and at 45 degrees to the

line between the antenna bases.

NOTE! Do NOT bend antennas backwards over the

module; doing so will cause poor performance and may

cause undesirable out-of-band radio transmissions.

Figure 9 - AMW006-E03 eval board with wire antennas

1.1.1 Chip Antenna

The AMWx06 is certified for use with a chip antenna

from Johanson, part number 2450AT42A100E. Be sure

Design Guidelines

ADS-MWx06-109R AMWx06 Datasheet Page |13

to follow the antenna layout design guidelines in the

antenna datasheet.

Figure 10 – Chip antenna layout example

6.5.3 Monopole Antenna

A u.FL connector layout such as the one shown below

can be used to connect the whip antenna(s).

Figure 11 - u.FL connector layout

Suitable monopole antennas include the

ACA_1SSRPP_2400 and ACA_4HSRPP_2458, both of

which are available online at http://ack.me.

Figure 12 - ACA-

1SSRPP-2400

Figure 13 - ACA-

4HSRPP-2458

Design Guidelines

ADS-MWx06-109R AMWx06 Datasheet Page |14

6.6 Application Examples

6.6.1 Operation using ZentriOS

To use ZentriOS, the module only requires an external

connection to power and a UART serial interface. A host

processor connects to UART0 (pins 19/20) or UART1

(pins 25/29) as shown in Figure 14.

Figure 14. Using the AMW006 Module with ZentriOS and a UART serial interface

Regulatory Certification

ADS-MWx06-109R AMWx06 Datasheet Page |15

7 Regulatory Certification

The AMW006 module has been certified for operation

in various regulatory domains. This section outlines

certification information specific to the following

countries and regions:

 United States

 Canada

 Europe

 Australia

 New Zealand

 Japan

Should you require regulatory certification for the

AMW006 module in a country or region not listed,

please contact your local Zentri sales office or create a

support request via our website at

http://ack.me/contact.

7.1 United States

The Zentri AMW006 module has received Federal

Communications Commission (FCC) CFR47

Telecommunications, Part 15 Sub-part C “Intentional

Radiators” modular approval in accordance with Part

15.212 Modular Transmitter approval. Modular

approval allows the end user to integrate the AMW006

module into a finished product without obtaining

subsequent and separate FCC approvals for intentional

radiation, provided no changes or modifications are

made to the module circuitry. Changes or modifications

could void the user’s authority to operate the

equipment. The end user must comply with all of the

instructions provided by the Grantee which indicate

installation and/or operating conditions necessary for

compliance.

The finished product is required to comply with all

applicable FCC equipment authorization, regulations,

requirements, and equipment functions not associated

with the transmitter module portion. For example,

compliance must be demonstrated to regulations for

other transmitter components within the host product;

to requirements for unintentional radiators (Part 15

Sub-part B “Unintentional Radiators”), such as digital

devices, computer peripherals, radio receivers, etc.;

and to additional authorization requirements for non-

transmitter functions on the transmitter module (i.e.

Verification, or Declaration of Conformity) (e.g.,

transmitter modules may also contain digital logic

functions) as appropriate.

7.1.1 Labeling and User Information

Requirements

The AMW006 module has been labelled with a unique

FCC ID number, and if the FCC ID is not visible when the

module is installed inside another device, then the

outside of the finished product into which the module

is installed must also display a label referring to the

enclosed module. This exterior label can use wording as

follows:

The user manual for the product should include the

following statement:

Contains FCC ID: 2ABPY-B5BD9

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

Regulatory Certification

ADS-MWx06-109R AMWx06 Datasheet Page |16

Additional information on labeling and user

information requirements for Part 15 devices can be

found in KDB Publication 784748 available at the FCC

Office of Engineering and Technology (OET) Laboratory

Division Knowledge Database (KDB) at the following

website:

https://apps.fcc.gov/oetcf/kdb/index.cfm

7.1.2 RF Exposure

All transmitters regulated by FCC must comply with RF

exposure requirements. OET Bulletin 65, Evaluating

Compliance with FCC Guidelines for Human Exposure to

Radio Frequency Electromagnetic Fields, provides

assistance in determining whether proposed or existing

transmitting facilities, operations or devices comply

with limits for human exposure to Radio Frequency (RF)

fields adopted by the Federal Communications

Commission (FCC). The bulletin offers guidelines and

suggestions for evaluating compliance.

If appropriate, compliance with exposure guidelines for

mobile and unlicensed devices can be accomplished by

the use of warning labels and by providing users with

information concerning minimum separation distances

from transmitting structures and proper installation of

antennas.

The following statement must be included as a

CAUTION statement in manuals and OEM products to

alert users of FCC RF exposure compliance:

If the AMW006 module is used in a portable application

(i.e., the antenna is less than 20 cm from persons during

operation), the integrator is responsible for performing

Specific Absorption Rate (SAR) testing in accordance

with FCC rules 2.1091.

7.1.3 Approved External Antenna Types

Modular approval testing of the AMW006 was

performed with the antenna types listed in Table 11 -

Tested External Antenna Types.

To maintain modular approval in the United States, only

the tested antenna types shall be used. It is permissible

to use different antenna manufacturers provided the

antenna types match: in-band and out-of-band

radiation patterns and antenna gain must be similar to

those tested.

7.1.4 Further Information

Additional information regarding FCC certification and

use of the AMW006 module in the United States is

available from the following sources.

 Federal Communications Commission (FCC)

http://www.fcc.gov.au

 FCC Office of Engineering and Technology (OET)

Laboratory Division Knowledge Database (KDB)

http://apps.fcc.gov/oetcf/kdb/index.cfm

This equipment has been tested and found to com-

ply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses and can radiate radio

frequency energy and if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However,

there is no guarantee that interference will not occur

in a particular installation. If this equipment does

cause harmful interference to radio or television

reception, which can be determined by turning the

equipment off and on, the user is encouraged to try

to correct the interference by one or more of the

following measures:

 Reorient or relocate the receiving antenna.

 Increase the separation between the

equipment and receiver.

 Connect the equipment into an outlet on a

circuit different from that to which the receiver

is connected.

 Consult the dealer or an experienced radio/TV

technician for help.

To satisfy FCC RF Exposure requirements for mobile

and base station transmission devices, a separation

distance of 20 cm or more should be maintained

between the antenna of this device and persons

during operation. To ensure compliance, operation

at closer than this distance is not recommended.

The antenna(s) used for this transmitter must not

be co-located or operating in conjunction with any

other antenna or transmitter

Regulatory Certification

ADS-MWx06-109R AMWx06 Datasheet Page |17

7.2 Canada

The AMW006 module has been certified for use in

Canada under Industry Canada (IC) Radio Standards

Specification (RSS) RSS-210 and RSSGen. Modular

approval permits the installation of a module in a host

device without the need to recertify the device.

7.2.1 Labeling and User Information

Requirements

Labeling Requirements for the Host Device (from

Section 3.2.1, RSS-Gen, Issue 3, December 2010): The

host device shall be properly labeled to identify the

module within the host device.

The Industry Canada certification label of a module

shall be clearly visible at all times when installed in the

host device, otherwise the host device must be labeled

to display the Industry Canada certification number of

the module, preceded by the words “Contains

transmitter module”, or the word “Contains”, or similar

wording expressing the same meaning, as follows:

User Manual Notice for License-Exempt Radio

Apparatus (from Section 7.1.3 RSS-Gen, Issue 3,

December 2010): User manuals for license-exempt

radio apparatus shall contain the following or

equivalent notice in a conspicuous location in the user

manual or alternatively on the device or both:

Transmitter Antenna Notification (from Section 7.1.2

RSS-Gen, Issue 3, December 2010): User manuals for

transmitters shall display the following notice in a

conspicuous location:

The above notice may be affixed to the device instead

of displayed in the user manual.

Contains transmitter module IC: 11685A-61F8D

This device complies with Industry Canada license-

exempt RSS standard(s). Operation is subject to the

following two conditions: (1) this device may not

cause interference, and (2) this device must accept

any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie

Canada applicables aux appareils radio exempts de

licence. L'exploitation est autorisée aux deux

onditions suivantes: (1) l'appareil ne doit pas

produire de brouillage, et (2) l'utilisateur de l'appareil

doit accepter tout brouillage radioélectrique subi,

meme si le brouillage est susceptible d'en

compromettre le fonctionnement.

Under Industry Canada regulations, this radio

transmitter may only operate using an antenna of a

type and maximum (or lesser) gain approved for the

transmitter by Industry Canada. To reduce potential

radio interference to other users, the antenna type

and its gain should be so chosen that the equivalent

isotropically radiated power (EIRP) is not more than

that necessary for successful communication.

Conformément à la réglementation d'Industrie Can-

ada, le présent émetteur radio peut fonctionner avec

une antenne d'un type et d'un gain maximal (ou

inférieur) approuvé pour l'émetteur par Industrie

Canada. Dans le but de réduire les risques de brouil-

lage radioélectrique à l'intention des autres utilisa-

teurs, il faut choisir le type d'antenne et son gain de

sorte que la puissance isotrope rayonnée

équivalente (p.i.r.e.) ne dépasse pas l'intensité

nécessaire à l'établissement d'une communication

satisfaisante.

Regulatory Certification

ADS-MWx06-109R AMWx06 Datasheet Page |18

User manuals for transmitters equipped with detach-

able antennas shall also contain the following notice in

a conspicuous location:

Immediately following the above notice, the

manufacturer shall provide a list of all antenna types

approved for use with the transmitter, indicating the

maximum permissible antenna gain (in dBi) and

required impedance for each.

7.2.2 External Antenna Types

Modular approval testing of the AMW006 was

performed with the antenna types listed in Table 11 -

Tested External Antenna Types.

Transmitter Antenna (from Section 7.1.2 RSS-Gen, Issue

3, December 2010):

The AMW006 module can only be sold or operated with

antennas with which it was approved. Transmitter may

be approved with multiple antenna types. An antenna

type comprises antennas having similar in-band and

out-of-band radiation patterns. Testing shall be

performed using the highest gain antenna of each

combination of transmitter and antenna type for which

approval is being sought, with the transmitter output

power set at the maximum level. Any antenna of the

same type having equal or lesser gain as an antenna

that had been successfully tested with the transmitter,

will also be considered approved with the transmitter,

and may be used and marketed with the transmitter.

When a measurement at the antenna connector is used

to determine RF output power, the effective gain of the

device's antenna shall be stated, based on

measurement or on data from the antenna

manufacturer.

For transmitters of output power greater than 10

milliwatts, the total antenna gain shall be added to the

measured RF output power to demonstrate compliance

to the specified radiated power limits.

7.2.3 Further Information

Additional information may be obtained from the

Industry Canada website at http://www.ic.gc.ca

7.3 Europe

The AMW006 module is an R&TTE Directive assessed

radio module that is CE marked and has been

manufactured and tested with the intention of being

integrated into a final product.

The AMW006 module has been tested to R&TTE

Directives as summarized in Table 12. European

Compliance Testing. Opinion has also been issued. All

AMW006 test reports are available on the Zentri

website at https://www.zentri.com/contact-us.

The R&TTE Compliance Association provides guidance

on modular devices in the document titled Technical

Guidance Note 01 available on the website at

http://www.rtteca.com/html/download_area.htm.

This radio transmitter (identify the device by

certification number, or model number if Category II)

has been approved by Industry Canada to operate

with the antenna types listed below with the

maximum permissible gain and required antenna

impedance for each antenna type indicated. Antenna

types not included in this list, having a gain greater

than the maximum gain indicated for that type, are

strictly prohibited for use with this device.

Le présent émetteur radio (identifier le dispositif par

son numéro de certification ou son numéro de

modèle s'il fait partie du matériel de catégorie I) a été

approuvé par Industrie Canada pour fonctionner

avec les types d'antenne énumérés ci-dessous et

ayant un gain admissible maximal et l'impédance

requise pour chaque type d'antenne. Les types

d'antenne non inclus dans cette liste, ou dont le gain

est supérieur au gain maximal indiqué, sont

strictement interdits pour l'exploitation de

l'émetteur.

Regulatory Certification

ADS-MWx06-109R AMWx06 Datasheet Page |19

7.3.1 Labeling and User Information

Requirements

The label on the final product which contains the

AMW006 module must follow CE marking

requirements. The R&TTE Compliance Association

Technical Guidance Note 01 provides guidance on final

product CE marking

7.3.1 External Antenna Requirements

From R&TTE Compliance Association document

Technical Guidance Note 01:

Provided the integrator installing an assessed radio

module with an integral or specific antenna and

installed in conformance with the radio module

manufacturer’s installation instructions requires no

further evaluation under Article 3.2 of the R&TTE

Directive and does not require further involvement of

an R&TTE Directive Notified Body for the final product.

[Section 2.2.4]

The European Compliance Testing listed in Table 12.

European Compliance Testing was performed using

antenna types listed in Table 11 - Tested External

Antenna Types.

7.3.2 Further Information

A document that can be used as a starting point in

understanding the use of Short Range Devices (SRD) in

Europe is the European Radio Communications

Committee (ERC) Recommendation 70-03 E, which can

be downloaded from the European Radio

Communications Office (ERO) at: http://www.ero.dk.

Further information may be obtained from the

following websites:

 Radio and Telecommunications Terminal

Equipment (R&TTE)

http://ec.europa.eu/enterprise/rtte/index_en.ht

m

 European Conference of Postal and

Telecommunications Administrations (CEPT)

http://www.cept.org

 European Telecommunications Standards

Institute (ETSI)

http://www.etsi.org

 European Radio Communications Office (ERO)

http://www.ero.dk

The Radio and Telecommunications Terminal

Equipment Compliance Association (R&TTE CA)

http://www.rtteca.com/

NOTE: To maintain conformance to the testing listed

in Table 12. European Compliance Testing, the

module shall be installed in accordance with the

installation instructions in this data sheet and shall

not be modified.

When integrating a radio module into a completed

product the integrator becomes the manufacturer of

the final product and is therefore responsible for

demonstrating compliance of the final product with

the essential requirements of the R&TTE Directive.

Regulatory Certification

ADS-MWx06-109R AMWx06 Datasheet Page |20

Table 12. European Compliance Testing

Certification

Standard

Report Number

Date

Laboratory

Safety

EN 60950-1:2006, A11:2009,

A1:2010, A12:2011, A2:2013

W6M21410-

14584-L

Jan 15, 2015

Worldwide Testing

Services (Taiwan) Co.,

Ltd.

EMF

EN 62311:2008

EA560122

Jul 1, 2015

Sporton International, Inc.

(Taiwan)

EMC

EN 301 489-1 v1.9.2 (2011-09), Class

B

EN 301 489-17 v2.2.1 (2012-09)

EN 55022:2010/AC:2011, Class B

EN 55024:2010

EH560122

Jul 1, 2015

Radio

EN 300 328 v1.9.1 (2015-02)

ER560122

Jul 1, 2015

Notified Body

Opinion

1177

TCF-1334TC15

Jul 5, 2015

TIMCO Engineering, Inc.

7.4 Australia

Australian radio regulations do not provide a modular

approval policy similar to the United States (FCC) and

Canada (IC). However, AMW006 module test reports

may be used in part to demonstrate compliance in

accordance with ACMA Radio communications “Short

Range Devices” Standard 2004 which references

Australia/New Zealand industry standard AS/NZS-

4268:2012. AMW006 RF transmitter test reports may

be used as part of the product certification and

compliance folder. For further information regarding

the availability of RF test reports, please contact Zentri

at https://www.zentri.com/contact-us.

7.4.1 External Antenna Requirements

Compliance tests were performed using antenna types

listed in Table 11 - Tested External Antenna Types.

If an external antenna is used with the AMW006

module, additional testing of the end product is needed

to meet Australian regulatory requirements.

7.4.2 Further Information

Additional information may be obtained from the

Australian Communications and Media Authority

website at http://www.acma.gov.au.

7.5 New Zealand

New Zealand radio regulations do not provide a

modular approval policy similar to the United States

(FCC) and Canada (IC). However, AMW006 module test

reports may be used in part to demonstrate compliance

with the New Zealand “General User Radio License for

Short Range Devices”. New Zealand Radio

communications (Radio Standards) Notice 2010

references Australia/New Zealand industry standard

AS/NZS-4268:2012. AMW006 RF transmitter test

reports may be used as part of the product certification

and compliance folder. For further information

regarding the availability of RF test reports, please

contact Zentri at https://www.zentri.com/contact-us.

7.5.1 External Antenna Requirements

Compliance tests were performed using antenna types

listed in Table 11 - Tested External Antenna Types.

If an external antenna is used with the AMW006

module, additional testing of the end product is needed

to meet New Zealand regulatory requirements.

Regulatory Certification

ADS-MWx06-109R AMWx06 Datasheet Page |21

7.5.2 Further Information

Additional information may be obtained from the New

Zealand Radio Spectrum Ministry of Economic

Development website at http://www.rsm.govt.nz.

7.6 Japan

The AMW006 has been tested to comply with the radio

regulations set forth by the Japanese Ministry of

Internal Affairs and Communications (MIC) as

documented in

Table 13. The module is certified for operation with

each of the antenna types listed in Table 11 - Tested

External Antenna Types.

Table 13. Japan Compliance Testing

Certification

Standard

Report Number

Date

Laboratory

Verification of

Compliance

VCCI V-3/2014.04 Class B ITE

JV560122

Jul 1, 2015

Sporton International, Inc.

(Taiwan)

Radio

Notice No. 88 Appendix No. 43

JRF560122

Jul 1, 2015

Equipment

Marking

152150256/AA/00

Jul 6, 2015

Telefication, BV.

(The Netherlands)

Packaging, Handling and Storage, RoHS

ADS-MWx06-109R AMWx06 Datasheet Page |22

8 Packaging, Handling and Storage, RoHS

8.1 Packaging

AMWx06 modules should be hand-soldered ONLY!

If reflow is required, AMWx06 modules must be baked first according to Joint Industry Standard J-STD-033C.

Modules are shipped in cut tape in lengths of 100 modules, with ESD-safe packaging, or in reels of 900 units.

Reels are shipped inside a moisture resistant sealed bag. The shelf life of the sealed reel is 12 months at 40°C and <90%

Relative Humidity (RH). Please refer to the bag seal date and the following section for handling and storage.

8.2 Handling & Storage

CAUTION

MSL3 Sensitive Device!

The AMW006 module is a moisture sensitive device rated at Moisture Sensitive Level 3 (MSL3) per IPC/JEDEC J-STD-

20.

After opening the moisture sealed storage bag, modules that will be subjected to reflow solder or other high

temperature processes must be:

1. mounted to a circuit board within 168 hours at factory conditions (≤30°C and <60% RH)

OR

2. continuously stored per IPC/JEDEC J-STD-033

Modules that have been exposed to moisture and environmental conditions exceeding packaging and storage

conditions MUST be baked before mounting according to IPC/JEDEC J-STD-033.

Failure to meet packaging and storage conditions will result in irreparable damage to modules during solder reflow.

8.3 RoHS Directive

The AMWx06 module is produced according to the RoHS (Restriction of the use of certain Hazardous Substances in

electrical and electronic equipment) directive and complies with the directive.

Packaging, Handling and Storage, RoHS

ADS-MWx06-109R AMWx06 Datasheet Page |23

8.4 Tape and Reel Specifications

Figure 15 - Tape Specifications

Symbol

A0

B0

D0

E

F

K0

Specification (mm)

15.6 ± 0.10

20.8 ± 0.10

1.5 ± 0.10

1.75 ± 0.10

20.2 ± 0.10

3.10 ± 0.10

Symbol

P

P0

P2

T

W

Specification (mm)

20.0 ± 0.10

4.00 ± 0.10

2.00 ± 0.10

0.30 ± 0.05

44.0 ± 0.30

 Tape material : black PS material, in line with ROHS environmental management substances

 Tape thickness: 0.3 mm ± 0.05 mm

 Tape width: 44mm (1.76")

 Protection zone: black PS material

 Distance between chain hole centers within the range of ± 0.2 mm of cumulative error

 Anti-camber at 1 mm / 250 mm

 All dimensions in line with the requirements of EIA-481-D

Packaging, Handling and Storage, RoHS

ADS-MWx06-109R AMWx06 Datasheet Page |24

Figure 16 - Reel Specifications

Symbol

A

B

C1

D

E

H

T

Specification (mm)

2.5 ± 0.2

11 ± 0.2

330 ± 1

99.5 ± 0.1

13.2 ± 0.2

44.8 + 0.3 / -0.2

2.25 ± 0.2

8.5 Cut Tape and Reel Quantity

Cut tape is available in lengths of 100 units.

Smaller quantities may be available from some distributors. If smaller quantities are purchased, ensure that modules

are managed in accordance with Moisture Sensitive Level 3 (MSL3) per IPC/JEDEC J-STD-20.

Each reel contains 900 units.

Ordering Information

ADS-MWx06-109R AMWx06 Datasheet Page |25

9 Ordering Information

You can order AMWx06 as either cut tape loaded with an unspecified ZentriOS, or as a full reel loaded with either a

specific ZentriOS version or a version of your embedded custom application.

When you order, refer to the OPN (Orderable Part Number), as described below. For examples, see Table 14. Ordering

Information.

9.1 Ordering an Unspecified ZentriOS Version

Order OPN: AMWx06

You can order an unspecified ZentriOS version as cut tape. The OPN is of the form <platform>, where <platform> is

AMW006 or AMW106.

When ZentriOS version is unspecified, orders of AMW006 or AMW106 modules ship with whatever versions of

ZentriOS are available. The firmware is not guaranteed to be the same for all items shipped. Cut tape is suitable for

sampling, evaluation, and pilot builds.

Upon delivery, you can update modules individually, via OTA (Over-The-Air update), with a specific firmware version.

9.2 Ordering a Specific ZentriOS Version or a Custom Firmware Version

ZentriOS version order OPN: AMWx06-x.y.zR

Custom firmware version OPN: AMWx06-xxxxxxR

Volume orders are delivered in reels, as indicated by the R suffix. To ensure consistency, an OPN is specified,

corresponding to a specific version.

ZentriOS version: the OPN is of the form <platform>-x.y.zR, where <platform> is AMW006 or AMW106, and x is major

version, y is minor version and z is patch version.

Custom firmware version: the OPN is of the form <platform>-xxxxxx, where <platform> is AMW006 or AMW106, and

xxxxxx is a unique ID indicating a specific product version. Zentri ships reels with the product version specified.

Custom firmware can be a product bundle for the AMW006 or AMW106. A custom product bundle includes a specific

version of ZentriOS. An AMW106 ZAP product bundle also contains a ZAP (ZentriOS application).

Table 14. Ordering Information

Order Type

Delivery Format

Example OPN

Unspecified firmware

Cut tape

AMW006

AMW106

Specified ZentriOS

version

Full reel box

AMW006-3.3.0R

AMW106-3.2.2R

Custom firmware

Full reel box

AMW006-H35GHJR

AMW106-FG7L21R

Revision History & Glossary

ADS-MWx06-109R AMWx06 Datasheet Page |26

10 Revision History & Glossary

10.1 Revision History

Table 15: Document Revision History

Revision

Date

Change Description

ADS-MW006-100R

Oct 20, 2014

Initial preliminary release

ADS-MW006-101R

Nov 25, 2014

Updated schematic, PCB trace antenna

ADS-MW006-102R

Mar 20, 2015

Added note on reset pin

ADS-MW006-103R

Apr 10, 2015

Added note on MLS3 non-compliance, and note on power consumption

ADS-MW006-104R

May 5, 2015

Added solder reflow charts, AMW106 properties

ADS-MW006-105R

Jun 9, 2015

Removed AMW106 properties; updated GPIO and ADC details

ADS-MWx06-106R

Sep 1, 2015

Added AMW106

Updated/added ETSI/CE v1.9.1 and Japan certification

Added tape and reel specifications.

ADS-MWx06-107R

June 6, 2016

Converted to Zentri branding.

ADS-MWx06-108R

Dec 21, 2016

Corrected tape specifications. Added firmware note in Ordering

Information. Adding “No Clean” process note in Soldering Information.

ADS-MWx06-109R

May 1, 2017

Added label orientation diagram. Added firmware features page. Revised

Ordering Information

10.2 Glossary

In most cases, acronyms and abbreviations are defined on first use. A comprehensive list of acronyms and other

terms used in Zentri documents are provided at https://docs.zentri.com/zentri/glossary.

References

ADS-MWx06-109R AMWx06 Datasheet Page |27

11 References

Throughout this data sheet, references to other documents are listed. The following documents provide additional

material:

1. IEEE 802.11 Standard – 2012

Institute of Electrical and Electronics Engineers.

http://standards.ieee.org

http://www.silabs.com

Silicon Laboratories Inc.

400 West Cesar Chavez

Austin, TX 78701

USA

Smart.

Connected.

Energy-Friendly.

Products

www.silabs.com/products

Quality

www.silabs.com/quality

Support and Community

community.silabs.com

Disclaimer

Silicon Labs intends to provide customers with the latest, accurate, and in-depth documentation of all peripherals and modules available for system and software implementers using or

intending to use the Silicon Labs products. Characterization data, available modules and peripherals, memory sizes and memory addresses refer to each specific device, and "Typical"

parameters provided can and do vary in different applications. Application examples described herein are for illustrative purposes only. Silicon Labs reserves the right to make changes

without further notice and limitation to product information, specifications, and descriptions herein, and does not give warranties as to the accuracy or completeness of the included

information. Silicon Labs shall have no liability for the consequences of use of the information supplied herein. This document does not imply or express copyright licenses granted

hereunder to design or fabricate any integrated circuits. The products are not designed or authorized to be used within any Life Support System without the specific written consent of

Silicon Labs. A "Life Support System" is any product or system intended to support or sustain life and/or health, which, if it fails, can be reasonably expected to result in significant

personal injury or death. Silicon Labs products are not designed or authorized for military applications. Silicon Labs products shall under no circumstances be used in weapons of mass

destruction including (but not limited to) nuclear, biological or chemical weapons, or missiles capable of delivering such weapons.

Trademark Information

Silicon Laboratories Inc.® , Silicon Laboratories®, Silicon Labs®, SiLabs® and the Silicon Labs logo®, Bluegiga®, Bluegiga Logo®, Clockbuilder®, CMEMS®, DSPLL®, EFM®,

EFM32®, EFR, Ember®, Energy Micro, Energy Micro logo and combinations thereof, "the world’s most energy friendly microcontrollers", Ember®, EZLink®, EZRadio®, EZRadioPRO®,

Gecko®, ISOmodem®, Precision32®, ProSLIC®, Simplicity Studio®, SiPHY®, Telegesis, the Telegesis Logo®, USBXpress® and others are trademarks or registered trademarks of

Silicon Labs. ARM, CORTEX, Cortex-M3 and THUMB are trademarks or registered trademarks of ARM Holdings. Keil is a registered trademark of ARM Limited. All other products or

brand names mentioned herein are trademarks of their respective holders.