CD62__15B CD67__15B POW-R-BLOKTM Dual SCR/Diode Isolated Module 150 Amperes / Up to 1800 Volts Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 Description: OUTLINE DRAWING Powerex SCR/Diode Modules are designed for use in applications requiring phase control and isolated packaging. The modules are isolated for easy mounting with other components on a common heatsink. TM POW-R-BLOK has been tested and recognized by the Underwriters Laboratories. A D F E B F 6 7 4 5 G S 1 2 3 M "K" (2) "J" (3) R Features: N C P H ~ CD62 3 5 4 CD67 7 2 6 3 + CONNECTION DIAGRAMS - 1 Electrically Isolated Heatsinking DBC Alumina (Al2O3) Insulator Glass Passivated Chips Metal Baseplate Low Thermal Impedance for Improved Current Capability Quick Connect Gate Terminal with Provision for Keyed Mating Plug UL Recognized (E78240) CD62__15B, CD67__15B Dual SCR/Diode Isolated POW-R-BLOKTM Module 150 Amperes / Up to 1800 Volts - 2 + 1 Q ~ Benefits: Ordering Information: CD62__15B, CD67__15B Outline Dimensions Dimension Inches Millimeters A 3.70 94 B 1.38 35 C 1.18 30 D 3.15 80 E 0.67 17 F 0.91 23 G 0.57 14.5 H 0.35 9 J M6 M6 K 0.26 6.5 M .020 5 N 0.28 7 P 1.10 28 Q 1.14 29 R 0.03 0.8 S 0.11 2.8 Select the complete nine digit module part number from the table below. Example: CD621615B is a 1600Volt, 150 Ampere SCR/Diode Isolated POW-R-BLOKTM Module Type CD62 CD67 Voltage Current Volts Amperes (x 10) (x100) 08 12 14 16 18 15 Version B No Additional Insulation Components Required Easy Installation No Clamping Components Required Reduce Engineering Time Applications: Bridge Circuits AC & DC Motor Drives Battery Supplies Power Supplies Large IGBT Circuit Front Ends Lighting Control Heat & Temperature Control Welders Note: Dimensions are for reference only. Revision Date: 04/28/2009 http://store.iiic.cc/ CD62__15B CD67__15B Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 POW-R-BLOKTM Dual SCR/Diode Isolated Module 150 Amperes / Up to 1800 Volts Absolute Maximum Ratings Characteristics Conditions Symbol Units Repetitive Peak Forward and Reverse Blocking Voltage VDRM & VRRM up to 1800 V Non-Repetitive Peak Reverse Blocking Voltage (t < 5 msec) VRSM VRRM + 100 V IT(RMS) 250 A IT(RMS) 355 A 180 Conduction, TC=85C IT(AV) 160 A 180 Conduction, TC=90C IT(AV) 150 A 60 Hz, 100% VRRM reapplied, Tj=125C ITSM 3700 A 60 Hz, No VRRM reapplied, Tj=125C ITSM 5250 A 50 Hz, 100% VRRM reapplied, Tj=125C ITSM 3520 50 Hz, No VRRM reapplied, Tj=125C ITSM 5000 A A RMS Forward Current 180 Conduction, TC=85C 180 Conduction, TC=85C (AC Switch) Average Forward Current Peak One Cycle Surge Current, Non-Repetitive Peak Three Cycle Surge Current, Non-Repetitive 60 Hz, 100% VRRM reapplied, Tj=125C 50 Hz, 100% VRRM reapplied, Tj=125C Peak Ten Cycle Surge Current, Non-Repetitive 2 I t for Fusing for One Cycle 60 Hz, 100% VRRM reapplied, Tj=125C 50 Hz, 100% VRRM reapplied, Tj=125C 8.3 ms, 100% VRRM reapplied, Tj=125C 8.3 ms, No VRRM reapplied, Tj=125C 10 ms, 100% VRRM reapplied, Tj=125C 10 ms, No VRRM reapplied, Tj=125C Maximum Rate-of-Rise of On-State Current, Non Repetitive Peak Gate Power Dissipation Tj=125C, VD=1.0 VDRM (Rated), ITM=400A , IG=0.5 A, Tr < 0.25s, tp > 6s ITSM 2970 A ITSM 2830 A ITSM 2335 A ITSM 2830 A 2 2 It 2 It 57,040 114,840 A sec 2 A sec It 2 61,950 A sec 2 It 125,000 A sec di/dt 300 A/s 2 2 Tp < 5 ms, Tj = 125C PGM 12 W Average Gate Power Dissipation F = 50 Hz, Tj = 125C PG(AV) 3 W Peak Forward Gate Current Tp < 5 ms, Tj = 125C IGFM 3 A Peak Reverse Gate Voltage Tp < 5 ms, Tj = 125C VGRM 10 V Operating Temperature TJ -40 to +125 C Storage Temperature Tstg -40 to +125 C 35 - 50 4-6 35 - 50 4-6 165 in.-Lb. Nm in.-Lb. Nm G Max. Mounting Torque, M6 Mounting Screw on Terminals Max. Mounting Torque, Module to Heatsink Module Weight, Typical V Isolation @ 25C 5.82 Oz. Tj= 25C, 1 second Vrms 3600 V Tj= 25C, 1 minute Vrms 3000 V Revision Date: 04/28/2009 http://store.iiic.cc/ CD62__15B CD67__15B POW-R-BLOKTM Dual SCR/Diode Isolated Module 150 Amperes / Up to 1800 Volts Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 Electrical Characteristics, TJ=25C unless otherwise specified Characteristics Symbol Test Conditions Repetitive Peak Forward Leakage Current IDRM Up to 1600V, TJ=125C 50 mA Repetitive Peak Reverse Leakage Current IRRM Up to 1600V, TJ=125C 50 mA Peak On-State Voltage Min. Max. Units VTM / VFM ITM / IFM =500A 1.6 V Threshold Voltage, Low-level Slope Resistance, Low-level V(TO)1 rT1 TJ = 125C, I = 16.7% x IT(AV) to IT(AV) 0.85 1.5 V m Minimum dV/dt dV/dt Exponential to 2/3 VDRM Tj=125C, Gate Open Turn-Off Time (Typical) t off Gate Trigger Current IGT Gate Trigger Voltage VGT Non-Triggering Gate Voltage Non-Triggering Gate Current 1000 50 - 200 TJ = 125C, IT= 300A, Rgk = 100 Vr = 50V, -dI/dt=15 A/s Re-Applied dV/dt = 20V/s, Linear to 2/3 VDRM Tj= 25C, VD=6V, Ra=1 Resistive Load VGDM Tj= 25C, VD=6V, Ra=1, Resistive Load Tj=125C, VD=VDRM IGDM Tj=125C, VD=VDRM V/s (Typical) s 150 mA 2.0 Volts 0.25 Volts 10 mA Holding Current IH TJ=25C 150 (Typical) mA Latching Current IL TJ=25C 300 (Typical) mA Max. Units Thermal Characteristics Characteristics Symbol Thermal Resistance, Junction to Case DC Operation RJ-C Per Module, both conducting Per Junction, both conducting 0.085 0.17 C/W C/W Thermal Resistance, Case to Sink Lubricated RC-S Per Module 0.05 C/W Information presented is based upon manufacturers testing and projected capabilities. This information is subject to change without notice. The manufacturer makes no claim as to the suitability of use, reliability, capability, or future availability of this product. Revision Date: 04/28/2009 http://store.iiic.cc/ CD62__15B CD67__15B POW-R-BLOKTM Dual SCR/Diode Isolated Module 150 Amperes / Up to 1800 Volts Powerex, Inc., Hillis Street, Youngwood, Pennsylvania 15697 (724) 925-7272 Maximum Transient Thermal Impedance Maximum On-State Forward Voltage Drop (Junction to Case) ( Tj = 125 C ) 0.180 5 Thermal Impedance - Rjc - C/W On-State Voltage - Vtm / Vfm - Volts 0.160 4 3 2 1 0.140 0.120 0.100 0.080 0.060 0.040 0.020 0 10 100 1000 0.000 0.01 10000 0.1 1 Maximum Allowable Case Temperature Maximum On-State Power Dissipation (Sinusoidal Waveform) (Sinusoidal Waveform) 125 120 220 180 90 200 Max. Case Temperature - Tcase -C_ Max. Power Dissipation Per Junction - Watts_ 240 60 180 160 30 15 140 120 100 80 60 180 0 40 360 CONDUCTION ANGLE 20 120 115 180 0 110 360 CONDUCTION ANGLE 105 15 100 30 60 95 90 90 180 120 85 0 0 20 40 60 80 100 120 140 160 0 180 20 40 60 80 100 120 140 160 180 Average On-State Current - It(av) / If(av) - Amperes Average On-State Current - It(av) / If(av) - Amperes Maximum Allowable Case Temperature Maximum On-State Power Dissipation (Rectangular Waveform) (Rectangular Waveform) 125 320 300 280 260 240 220 200 180 160 140 120 100 80 60 40 20 0 270 360 120 180 Max. Case Temperature - Tcase -C_ Max. Power Dissipation Per Junction - Watts_ 10 Time - t - Seconds Instantaneous On-State Current - Itm / Ifm - Amperes 120 90 60 15 30 180 0 360 115 100 15 95 30 60 90 90 85 20 40 60 80 100 120 140 160 180 200 220 240 260 Average On-State Current - It(av) / If(av) - Amperes 120 360 180 270 75 0 360 CONDUCTION ANGLE 105 80 CONDUCTION ANGLE 180 0 110 0 20 40 60 80 100 120 140 160 180 200 220 240 260 Average On-State Current - It(av) / If(av) - Amperes Revision Date: 04/28/2009 http://store.iiic.cc/