http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
1
o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
2010.9.9
Inductors (Coils) > Chip Inductor (Chip Coil) > for High Frequency Multilayer Type
1.6±0.15
0.3±0.2 Polarity Marking
0.8±0.15
(in mm)
0.8±0.15
Chip Inductor (Chip Coil) for High Frequency Multilayer Type
LQG18H Series (0603 Size)
Dimensions Packaging
Code Packaging Minimum Quantity
D180mm Paper Tape 4000
J330mm Paper Tape 10000
BBulk(Bag) 1000
Rated Value (p: packaging code)
Part Number Inductance Test Frequency Rated Current Max. of DC resistance Q (min.) Test Frequency Self Resonance Frequency (min.)
LQG18HN1N2S00p
1.2nH±0.3nH 100MHz 500mA 0.10ohm 12 100MHz 6000MHz
LQG18HN1N5S00p
1.5nH±0.3nH 100MHz 500mA 0.10ohm 12 100MHz 6000MHz
LQG18HN1N8S00p
1.8nH±0.3nH 100MHz 500mA 0.10ohm 12 100MHz 6000MHz
LQG18HN2N2S00p
2.2nH±0.3nH 100MHz 500mA 0.10ohm 12 100MHz 6000MHz
LQG18HN2N7S00p
2.7nH±0.3nH 100MHz 500mA 0.15ohm 12 100MHz 6000MHz
LQG18HN3N3S00p
3.3nH±0.3nH 100MHz 500mA 0.15ohm 12 100MHz 6000MHz
LQG18HN3N9S00p
3.9nH±0.3nH 100MHz 450mA 0.15ohm 12 100MHz 6000MHz
LQG18HN4N7S00p
4.7nH±0.3nH 100MHz 450mA 0.20ohm 12 100MHz 6000MHz
LQG18HN5N6S00p
5.6nH±0.3nH 100MHz 430mA 0.20ohm 12 100MHz 5000MHz
LQG18HN6N8J00p
6.8nH±5% 100MHz 430mA 0.25ohm 12 100MHz 5000MHz
LQG18HN8N2J00p
8.2nH±5% 100MHz 400mA 0.25ohm 12 100MHz 4000MHz
LQG18HN10NJ00p
10nH±5% 100MHz 400mA 0.30ohm 12 100MHz 3500MHz
LQG18HN12NJ00p
12nH±5% 100MHz 400mA 0.35ohm 12 100MHz 3000MHz
LQG18HN15NJ00p
15nH±5% 100MHz 350mA 0.40ohm 12 100MHz 2800MHz
LQG18HN18NJ00p
18nH±5% 100MHz 350mA 0.45ohm 12 100MHz 2600MHz
LQG18HN22NJ00p
22nH±5% 100MHz 300mA 0.50ohm 12 100MHz 2300MHz
LQG18HN27NJ00p
27nH±5% 100MHz 300mA 0.55ohm 12 100MHz 2000MHz
LQG18HN33NJ00p
33nH±5% 100MHz 300mA 0.60ohm 12 100MHz 1700MHz
LQG18HN39NJ00p
39nH±5% 100MHz 300mA 0.65ohm 12 100MHz 1500MHz
LQG18HN47NJ00p
47nH±5% 100MHz 300mA 0.70ohm 12 100MHz 1200MHz
LQG18HN56NJ00p
56nH±5% 100MHz 300mA 0.75ohm 12 100MHz 1100MHz
LQG18HN68NJ00p
68nH±5% 100MHz 300mA 0.80ohm 12 100MHz 1000MHz
LQG18HN82NJ00p
82nH±5% 100MHz 300mA 0.85ohm 12 100MHz 900MHz
Operating Temperature Range: -40°C to +85°C
Only for reflow soldering.
Continued on the following page.
Continued from the preceding page.
http://www.murata.com/
Data Sheet
!
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2
o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design.
2010.9.9
Inductors (Coils) > Chip Inductor (Chip Coil) > for High Frequency Multilayer Type
Part Number Inductance Test Frequency Rated Current Max. of DC resistance Q (min.) Test Frequency Self Resonance Frequency (min.)
LQG18HNR10J00p
100nH±5% 100MHz 300mA 0.90ohm 12 100MHz 800MHz
100 1000 10000
Frequency (MHz)
200
160
120
80
40
0
3.3nH
10nH
68nH
Q
100 1000 10000
1000
100
10
1
68nH
10nH
3.3nH
Frequency (MHz)
Inductance (nH)
Operating Temperature Range: -40°C to +85°C
Only for reflow soldering.
Q-Frequency Characteristics (Typ.) Inductance-Frequency Characteristics (Typ.)
!Caution (Rating)
Do not use products beyond the rated current as
this may create excessive heat.
Notice
Solderability of Tin plating termination chip might be
deteriorated when low temperature soldering profile
where peak solder temperature is below the Tin melting
point is used. Please confirm the solderability of Tin
plating termination chip before use.
!Caution/Notice