Need more information?
Call the AMP Product
Information Center:
1-800-522-6752
The Product Information
Center is staffed with
specialists well versed in all
AMP products. The Center
can provide you with:
■Technical Support
■Catalogs
■Technical Documents
■Product Samples
■AMP Authorized
Distributor Locations
STRATO-THERM
Terminals & Splices for High Temperature Applications Catalog 82011
Revised 3-98
Heat…extreme heat…sear-
ing temperatures up to
1200°F [649°C]. This is one
of the most challenging
environments that electrical/
electronic circuitry has ever
entered.
If heat is an unavoidable
dimension in your circuit
design and production, this
product is an important ally.
In this AMP line of
STRATO-THERM terminals
and splices, you’ll find high
temperature circuit hard-
ware. You’ll also find solu-
tions to other more familiar
circuit problems such as
vibration, corrosion and
flash-over, when they occur
at high temperatures.
Different types of high tem-
perature terminals and
splices found in this catalog
are as follows:
PIDG Terminals and
Splices, and Pre-Insulated
Spare Wire Caps — 550°F
[288°C] Range
PIDG Insulation Restriction
Terminals — 550°F [288°C]
Range
Post-Insulated Terminals
and Splices — 550°F [288°C]
R a n g e
Uninsulated Terminals and
Splices — 650°F [343°C]
Range
Uninsulated Terminals and
Splices — 1200°F [649°C]
Range
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
1
Specifications subject to change.
Consult AMP Incorporated for latest
design specifications.
© Copyright 1965, 1966, 1970, 1972,
1973, 1974, 1975, 1977, 1980, 1983,
1991 and 1998 by AMP Incorporated.
All Rights Reserved.
AMP, STRATO-THERM, PIDG,
DIAMOND GRIP, SOLISTRAND,
CERTI-CRIMP, AMP-TAPETRONIC,
DYNA-CRIMP are Trademarks.
T E F L ON—Trademark of E.I. duPont, Inc.
Product Facts
■Product available in tem-
perature ranges of 500°F
[260°C], 550°F [288°C],
650°F [343°C] and 1200°F
[649°C]
■Product employs the
famous “W” and “C” crimp
■Wide range of wire sizes
■Complete line of related
application tooling
■Accommodates solid
and/or stranded conductors
Catalog 82011
Revised 3-98
Table of Contents
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
2
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3, 4
Insulated Terminals and Splices:
PIDG (Pre-Insulated Diamond Grip)
Ring Tongue Terminals — 550°F [288°C] and 500°F [260°C] . . . . . . . . . . . . . . . . . 5, 6
Insulation Restriction Ring Tongue Terminals — 550°F [288°C] . . . . . . . . . . . . . . . . . 6
Splices — 500°F [260°C] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Spare Wire Caps — 550°F [288°C] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Post Insulated
Ring Tongue Terminals — 500°F [260°C] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Splices — 550°F [288°C] and 500°F [260°C] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Uninsulated Terminals and Splices:
Non-Insulation Support
Heat Resistant 650°F [343°C]—
Ring Tongue Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9, 10
Splices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
High Temperature 1200°F [649°C]—
Ring Tongue Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Spade Tongue Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Splices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Insulation Support
Heat Resistant 650°F [343°C]—
Ring Tongue Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Splices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
High Temperature 1200°F [649°C]—
Ring Tongue Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14, 15
Splices. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Application Tooling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17-21
Numerical Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
STRATO-THERM
Terminals & Splices for High Temperature Applications
STRATO-THERM
Terminals & Splices for High Temperature Applications Catalog 82011
Revised 3-98
Introduction
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
3
PIDG Terminals and
Splices, and Pre-Insulated
Spare Wire Caps
550°F [288°C] Range
Designed for reliable perfor-
mance up to 550°F [288°C],
this line of ring-tongue
terminals, butt splices and
spare wire caps features a
pre-insulation sleeve of
TEFLON TFE insulation
material. A special funnel
entry feature has been
added to assure easy entry
and proper seating of wire.
The body is copper with a
choice of gold over nickel
plating or nickel plating.
The terminal and splice
barrel accommodates
stranded wire conductors
only. The spare wire caps
are designed for unstripped
wire.
PIDG Insulation
Restriction Terminals
550°F [288°C] Range
These pre-insulated insula-
tion restriction terminals
prevent the insulation of
thin-wall insulation wire from
entering the terminal’s wire
crimp area during the
crimping process.
Designed for reliable perfor-
mance up to 550°F [288°C],
these terminals feature a
pre-insulation sleeve of
TEFLON (TFE) insulation
material.
Uninsulated Terminals
and Splices
1200°F [649°C] Range
Nickel material is used for
the body of both the termi-
nal and splice. They are
available with or without
wire insulation support
sleeve of nickel-silver alloy
material. Accommodating
either solid or stranded con-
ductors in different combi-
nations, these terminals and
splices are made to cover a
broad wire size range, listed
in the tabular data section.
Terminals made of alumel
and chromel material with
nickel-silver alloy sleeves
are available for thermo-
couple applications. When
using either alumel or
chromel conductors, a ter-
minal of the same material
should be selected.
Because of features such
as a one-piece constructed
inner sleeve and a wide
funnel entry design which
facilitates wire entry, stan-
dard STRATO-THERM PIDG
tooling may be used to ter-
minate this product.
Post-Insulated
Terminals and Splices
550°F [288°C] Range
The temperature range of
these terminals and splices
is 550°F [288°C] for nickel
plating and gold over nickel
plated copper, and 500°F
[ 2 6 0°C] for silver plating,
These terminals and splices
accommodate solid and/or
stranded conductors.
Uninsulated Terminals
and Splices
650°F [343°C] Range
These terminals and splices
are available with and with-
out wire insulation support.
Both types are manufac-
tured from electrolytic cop-
per, plated with nickel. In the
insulation support type, the
support sleeve is fabricated
from nickel-silver alloy. Both
types accommodate solid or
stranded conductors in vari-
ous combinations. Wire size
range is listed in the tabular
data section.
STRATO-THERM
Terminals & Splices for High Temperature Applications Catalog 82011
Revised 3-98
Introduction (Continued)
Ordering Information
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
4
All terminals and splices are
listed according to wire size
and type of terminal or
splice. If the part number of
the terminal or splice is
known, refer to the
Numerical Index, at the
back of this catalog, for
page location of tabular
data.
In the Tabular Data Section,
part numbers are available
in either loose piece or tape
mounted form.
When ordering tape mount-
ed part numbers, specify
the terminal or splice part
number, the total quantity of
parts desired (if applicable).
The chart to the right lists
by wire size the type of
packaging available and
the quantity per package.
All five types of
STRATO-THERM terminals
and splices provide opti-
mum corrosion and vibration
resistance plus outstanding
tensile characteristics.
All types, except the
STRATO-THERM PIDG ter-
minals, splices and pre-
insulated spare wire caps,
employ the famous “W”
crimp which creates the
precise electromechanical
properties necessary for
solid and/or stranded con-
ductor combinations. A
proper crimp will provide a
uniform and permanent
attachment. When mechani-
cal pressure is applied to
the terminal barrel, the wire
inside is forced into the ser-
rations or dimples of the
barrel. Shown are four typi-
cal photomacrographs of
the “W” crimp, illustrating
the results of crimping vari-
ous conductor combina-
tions. In each case, the
action of the crimp has
compressed the conductors
and the barrel into a
homogenous mass.
The Crimp STRATO-THERM PIDG
terminals and splices
employ the equally reliable
confined “C” crimp plus
multiple position insulation
support crimp for today’s
smaller insulated wires. This
“C” crimp is especially suit-
ed to crimping the terminal
barrel and insulation sleeve
to stranded wire conduc-
tors. The photomacrograph
shows the results of “C”
crimping. Virtually the same
electromechanical proper-
ties are obtained as in the
“W” crimp. Pre-insulated
spare wire caps and post-
insulated splices are
crimped with an “O” crimp
configuration.
Wire Range Standard Quantities
AWG Loose Piece Tape Mounted
26–14 1,000 5,000
26–22 — 2,500
12–10 500 2,500
8, 6, 4 100 —
2, 1⁄050 —
Note: Package quantities may vary with specific part numbers.
Confined C
One Stranded
Two Solid
One Solid
Two Stranded
One Solid
“W” Crimp
Tongue Dimensions Wire Part Numbers
Wire Size Material Stud Terminal Insulation Body
Circular Mils Thickness Size WC E L Insulation Diameter Plating1Loose Tape
[mm2]Max. Min. Max. Max. Color Max. Piece Mounted
.203 .211 .542 .646 .082
26-24 .020 45.16 5.36 13.77 16.41 Black 2.08 Nickel 50829 —
238-475 0.51 6.250 .281 .612 .740 .082
[0.12-0.24] M3.5 6.35 7.14 15.54 18.80 Black 2.08 Nickel 50830 —
.281 .250 .631 .774 .100
47.14 6.35 16.03 19.66 Green 2.54 Nickel 50831 —
.281 .250 .631 .774 .100
67.14 6.35 16.03 19.66 Green 2.54 Nickel 50831-1 —
M3.5 .281 .250 .631 .774 .100
7.14 6.35 16.03 19.66 Green 2.54 Gold 1-332433-0 —
22-20 .025 .312 .281 .662 .821 .100
509-1,290 0.64 87.92 7.14 16.81 20.85 Green 2.54 Nickel 50832 50832-2
[0.26-0.65] M4 .312 .281 .662 .821 .100
7.92 7.14 16.81 20.85 Green 2.54 Gold 332434 —
.312 .281 .662 .821 .100
7.92 7.14 16.81 20.85 Green 2.54 Nickel 50832-1 50832-3
10 .312 .281 .662 .821 .100
7.92 7.14 16.81 20.85 Green 2.54 Gold 1-332434-0 —
.218 .156 .560 .672 .135
45.54 3.96 14.22 17.07 Orange 3.43 Nickel 50834 —
.281 .250 .654 .797 .135
67.14 6.35 16.61 20.24 Orange 3.43 Nickel 50835 50835-1
M3.5 .281 .250 .654 .797 .135
7.14 6.35 16.61 20.24 Orange 3.43 Gold 332453 —
.312 .281 .685 .844 .135
18-16 .033 87.92 7.14 17.40 21.44 Orange 3.43 Nickel 50836 —
1,600-2,800 0.84 M4 .312 .281 .685 .844 .135
[0.81-1.42] 7.92 7.14 17.40 21.44 Orange 3.43 Gold 332454 —
.312 .281 .685 .844 .135
7.92 7.14 17.40 21.44 Orange 3.43 Nickel 50836-1 50836-3
10 .312 .281 .685 .844 .135
7.92 7.14 17.40 21.44 Orange 3.43 Gold 1-332454-0 —
1/4 .468 .437 .841 1.078 .135
M6 11.89 11.10 21.36 27.38 Orange 3.43 Nickel 50837 —
.531 .531 .924 1.192 .135
3⁄8 13.49 13.49 23.47 30.28 Orange 3.43 Nickel 50838 —
.250 .171 .575 .703 .150
66.35 4.34 14.61 17.86 White 3.81 Nickel 50839-1 —
M3.5 .250 .171 .575 .703 .150
6.35 4.34 14.61 17.86 White 3.81 Gold 1-332438-0 —
8.343 .281 .685 .859 .150
14 .033 M4 8.71 7.14 17.40 21.82 White 3.81 Nickel 50840 —
4,234 0.84 .343 .281 .685 .859 .150
[2.15] 8.71 7.14 17.40 21.82 White 3.81 Nickel 50840-1 —
10 .343 .281 .685 .859 .150
8.71 7.14 17.40 21.82 White 3.81 Gold 1-332439-0 —
1/4 .468 .437 .841 1.078 .150
M6 11.89 11.10 21.36 27.38 White 3.81 Nickel 50841 —
1Nickel plated parts are to be used with nickel plated wire. Gold plated parts are to be used with silver plated wire.
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
STRATO-THERM
Terminals & Splices for High Temperature Applications Catalog 82011
Revised 3-98
Insulated Terminals and Splices
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
5
Related Product Data
Application Tooling— pages 17-21
Temperature Rating,
Material and Finish
Insulation —TEFLON
Terminal Body— Copper per
ASTM B152
Plating —Nickel per QQ-N-290,
550°F [288°C]. Gold per MIL-G-
45204 over Nickel per QQ-N-290
500°F [260°C]
Metallic Sleeve— Copper per
ASTM B152
Plating —Nickel per QQ-N-290,
550°F [288°C]
PIDG (Pre-Insulated
Diamond Grip)
Ring Tongue Terminals
STRATO-THERM
Terminals & Splices for High Temperature Applications Catalog 82011
Revised 3-98
Insulated Terminals and Splices (Continued)
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
6
Tongue Dimensions Wire Part Numbers
Wire Size Material Stud Terminal Insulation Body
Circular Mils Thickness Size WC E L Insulation Diameter Plating1Loose Tape
[mm2]Max. Min. Max. Max. Color Max. Piece Mounted
.281 .219 .794 .937 .214
47.14 5.56 20.17 23.80 Black 5.44 Nickel 50844 —
6.375 .302 .893 1.083 .214
M3.5 9.53 7.67 22.68 27.51 Black 5.44 Nickel 50845 —
8.375 .302 .893 1.083 .214
M4 9.53 7.67 22.68 27.51 Black 5.44 Nickel 50845-1 —
.375 .302 .893 1.083 .214
12-10 .042 9.53 7.67 22.68 27.51 Black 5.44 Nickel 50845-2 —
5,180-13,100 1.07 10 .375 .302 .893 1.083 .214
[2.62-6.64] 9.53 7.67 22.68 27.51 Black 5.44 Gold 1-332446-1 —
1/4 .531 .437 1.012 1.280 .214
M6 13.49 11.10 25.70 32.51 Black 5.44 Nickel 50846 —
5/16 .531 .468 1.059 1.327 .214
M8 13.49 11.89 26.90 33.71 Black 5.44 Nickel 50847 —
.593 .531 1.106 1.405 .214
3/8 15.06 13.49 28.09 35.69 Black 5.44 Nickel 50848 —
1Nickel plated parts are to be used with nickel plated wire. Gold plated parts are to be used with silver plated wire.
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
PIDG (Pre-Insulated
Diamond Grip)
Ring Tongue Terminals
(Insulation Restricting)
Temperature Rating,
Material and Finish
Insulation —TEFLON
Terminal Body and Metallic
Sleeve —Copper per ASTM B152
Plating —Nickel per QQ-N-290,
550°F [288°C]
Wire Size Tongue Dimensions Wire
Material Stud Terminal Insulation Part Numbers
Circular Mils Thickness Size W C E L Insulation Diameter Loose Piece
[mm2]Max. Min. Max. Max. Color Max.
24 .020 .300 .281 .652 .807 .055
475 0.51 10 7.62 7.14 16.56 20.50 Blue 1.40 55114-1
[0.24]
22 .025 .281 .250 .666 .809 .110
754 0.64 47.14 6.35 16.92 20.55 Green 2.79 53572-1
[0.38]
12 .042 .375 .302 .933 1.123 .200
6,654 1.07 10 9.53 7.67 23.70 28.52 Yellow 5.08 53587-1
[3.37]
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
PIDG (Pre-Insulated
Diamond Grip)
Ring Tongue Terminals
(Continued)
Related Product Data
Application Tooling— pages 17-21
Related Product Data
Application Tooling— pages 17-21
Temperature Rating,
Material and Finish
Insulation —TEFLON
Terminal Body— Copper per
ASTM B152
Plating —Nickel per QQ-N-290,
550°F [288°C]. Gold per MIL-G-
45204 over Nickel per QQ-N-290
500°F [260°C]
Metallic Sleeve— Copper per
ASTM B152
Plating —Nickel per QQ-N-290,
550°F [288°C]
STRATO-THERM
Terminals & Splices for High Temperature Applications Catalog 82011
Revised 3-98
Insulated Terminals and Splices (Continued)
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
7
Wire Tool
Insulation Dimension Ring Part Color
Diameter Color Numbers Guide
Range L Max.
.036–.043 .500
0.91–1.09 12.70 Red and Green 328854 Green
.044–.051 .500
1.12–1.30 12.70 Blue and Green 328855 Green
.052–.056 .500
1.32–1.42 12.70 Yellow and Green 328856 Green
.056–.064 .500
1.42–1.63 12.70 Brown and Green 328857 Green
.065–.074 .500
1.65–1.88 12.70 Violet and Green 328858 Green
.075–.087 .500
1.91–2.21 12.70 Black and Orange 328859 Orange
.088–.110 .500
2.24–2.79 12.70 Gray and Orange 328860 Orange
.125–.138 .500
3.18–3.51 12.70 Nickel and Nickel 328861 White
Related Product Data
Application Tooling— shown this
p a g e
Pre-Insulated
Spare Wire Caps
(For Unstripped Wire)
Temperature Rating,
Material and Finish
Insulation —TEFLON
Ring —Copper per ASTM B152
Plating —Nickel per QQ-N-290,
550°F [288°C]
Tool Part No.
69272-1
Wire Size Dimension Metallic Wire
Insulation Part Numbers
Circular Mils L Max. Sleeve Diameter Loose Piece
[mm2] Color Max.
22-20 1.156 .100
509-1,290 29.36 Natural 2.54 330377
[0.26-0.65]
18-16 1.531 .140
1,600-2,800 38.89 Red 3.56 330378
[0.81-1.42]
14-12 1.781 .170
3,831-6,654 45.24 Blue 4.32 330379
[1.94-3.37]
Related Product Data
Application Tooling— pages 17-21
Pre-Insulated
Butt Splices Temperature Rating,
Material and Finish
Insulation —TEFLON
Splice Body —Copper per
ASTM B152
Plating —Gold per MIL-G-45204
over Nickel per QQ-N-290, 500°F
[260°C]
Metallic Sleeve— Copper per
ASTM B152
Plating —Nickel per QQ-N-290,
550°F [288°C]
Wire Size Dimension Ring Part No.
Circular Mils L Dim. Approx. Splice Ring Ring Color Wire Insulation Loose
[mm2](After Crimping) Plating Material Plating Code Diameter Range Piece
26-24 .937 .040-.050
238-475 23.80 Gold Aluminum — Yellow 1.02-1.27 324370
[0.12-0.24] 1.062 .080-.100
22-20 26.97 Silver Copper Nickel Natural 2.03-2.54 3268351
509-1,290 1.650 .050-.068
[0.26-0.65] 41.91 Nickel Aluminum — Red 1.27-1.73 55235-1
18-16 1.312 .064-.088
1,600-2,800 33.32 Gold Aluminum — Red 1.63-2.24 329647
[0.81-1.42]
81.921 .215-.255
13,100-20,800 48.79 Gold Aluminum — Red 5.46-6.48 329716
[6.64-10.5]
1No bushing
STRATO-THERM
Terminals & Splices for High Temperature Applications Catalog 82011
Revised 3-98
Insulated Terminals and Splices (Continued)
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
8
Post-Insulated
Splices
Plating —Silver per QQ-S-365,
500°F [260°C], Gold per MIL-G-
45204 over Nickel per QQ-N-290,
500°F [260°C]
Ring —Copper per ASTM B152,
Aluminum per QQ-A-250/1
Temperature Rating,
Material and Finish
Insulation —TEFLON
Terminal Body— Copper per
ASTM B152
Wire Size Tongue Dimensions Wire Part No.
Material Stud W L Dim. Body Ring Ring Ring Insulation
Circular Mils Thickness Size Approx. Plating Material Plating Color Diameter Loose
[mm2]Max. (After Crimping) Code Range Piece
22-20 .025 8.312 .906 .046-.063
509-1,290 0.64 M4 7.92 23.01 Silver Copper Nickel Natural 1.17-1.60 326760
[0.26-0.65]
8.051 .469 1.560 .215-.255
13,100-20,800 1.30 10 11.91 39.62 Gold Aluminum — Red 5.46-6.48 329580
[6.64-10.5]
6.060 .468 1.870 .270-.310
20,800-33,100 1.52 10 11.89 47.50 Gold Aluminum — Blue 6.86-7.87 329583
[10.5-16.8]
Post-Insulated
Ring Tongue Terminals
Plating —Nickel per QQ-N-290,
550°F [288°C]
Related Product Data
Application Tooling— pages 17-21
Plating —Gold per MIL-G-45204
over Nickel per QQ-N-290, 500°F
[260°C], Nickel per QQ-N-290,
550°F [288°C], Silver per QQ-S-
365, 500°F [260°C]
Ring —Aluminum per QQ-A-250/1,
Copper per ASTM B152
Temperature Rating,
Material and Finish
Insulation —TEFLON
Bushing —TEFLON
Splice Body —Copper per
ASTM B152
Plating —Nickel per QQ-N-290,
550°F [288°C]
Related Product Data
Application Tooling— pages 17-21
STRATO-THERM
Terminals & Splices for High Temperature Applications Catalog 82011
Revised 3-98
Uninsulated Terminals and Splices
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
9
Solistrand
Heat Resistant
Ring Tongue Terminals
Temperature Rating,
Material and Finish
Terminal Body— Copper per
ASTM B152
Plating —Nickel per QQ-N-290,
650°F [343°C]
Related Product Data
Application Tooling— pages 17-21
Non-Insulation Support Non-Insulation Support
(Wire Range 2 & 1/0)
Tongue Dimensions Part Numbers
Wire Size Material Stud Style
Circular Mils Thickness Size W C E L Loose Tape
[mm2]Max. Max. Max. Piece Mounted
.218 .156 .337 .449
6A5.54 3.96 8.56 11.40 322797 —
M3.5 .281 .250 .436 .574
22-16 .033 A7.14 6.35 11.07 14.58 323219 —
509-3,260 0.84 8.281 .250 .436 .574
[0.26-1.65] M4 A7.14 6.35 11.07 14.58 322798 —
.281 .250 .436 .574
10 A 7.14 6.35 11.07 14.58 322799 —
.343 .281 .462 .636
6A8.71 7.14 11.73 16.15 322693 —
M3.5 .250 .171 .352 .480
A6.35 4.34 8.94 12.19 322805 —
16-14 .033 8.343 .281 .462 .636
2,050-5,180 0.84 M4 A8.71 7.14 11.73 16.15 322694 —
[1.04-2.62] .343 .281 .462 .636
10 A 8.71 7.14 11.73 16.15 322695* 2-322695-2
1/4 .469 .437 .618 .855
M6 A11.91 11.10 15.70 21.72 322733 —
6.375 .302 .575 .765
M3.5 A9.53 7.67 14.61 19.43 323060 —
8.375 .302 .575 .765
M4 A9.53 7.67 14.61 19.43 323061 —
.375 .302 .575 .765
12-10 .042 10 A 9.53 7.67 14.61 19.43 323062 2-323062-2
5,180-13,100 1.07 1/4 .531 .468 .736 1.004
[2.62-6.64] M6 A13.49 11.89 18.69 25.50 323063 —
5/16 .531 .468 .736 1.004
M8 A13.49 11.89 18.69 25.50 323064 —
.593 .531 .799 1.098
3/8 A 15.06 13.49 20.29 27.89 323065 —
8.406 .359 .743 .949
M4 A10.31 9.12 18.87 24.10 2-324061-5 —
.406 .359 .743 .949
10 A 10.31 9.12 18.87 24.10 323165 —
8.051 1/4 .469 .359 .696 .933
13,100-20,800 1.30 M6 A11.91 9.12 17.68 23.70 323166 —
[6.64-10.5] 5/16 .562 .406 .790 1.074
M8 A14.27 10.31 20.07 27.28 323167 —
.594 .531 .868 1.168
3/8 A 15.09 13.49 22.05 29.67 323168 —
.468 .531 .931 1.168
10 A 11.89 13.49 23.65 29.67 323169 —
1/4 .468 .531 .931 1.168
6.060 M6 A11.89 13.49 23.65 29.67 323170 —
20,800-33,100 1.52 5/16 .625 .531 .931 1.246
[10.5-16.8] M8 A15.88 13.49 23.65 31.65 323171 —
.625 .531 .931 1.246
3/8 A 15.88 13.49 23.65 31.65 323172 —
*Available in small packaging quantities.
STRATO-THERM
Terminals & Splices for High Temperature Applications Catalog 82011
Revised 3-98
Uninsulated Terminals and Splices (Continued)
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
10
Solistrand
Heat Resistant
Ring Tongue Terminals
(Continued)
Solistrand
Heat Resistant
Splices
Temperature Rating,
Material and Finish
Splice Body —Copper per
ASTM B152
Plating —Nickel per QQ-N-290,
650°F [343°C]
Related Product Data
Application Tooling— pages 17-21
Style-A
Non-Insulation
Support
Butt Splice
Style-B
Non-Insulation
Support
Parallel Splice
Style-C
Non-Insulation
Support
Butt Splice
Tongue Dimensions Part Numbers
Wire Size Material Stud Style
Circular Mils Thickness Size W C E L Loose Tape
[mm2]Max. Max. Max. Piece Mounted
1/4 .500 .437 .946 1.199
M6 A12.70 11.10 24.03 30.45 323173 —
4.073 5/16 .625 .500 1.009 1.324
33,100-52,600 1.85 M8 A15.88 12.70 25.63 33.63 323174 —
[16.8-26.7] .625 .500 1.009 1.324
3/8 A 15.88 12.70 25.63 33.63 323175 —
2.073 .625 .540 1.212 1.527
52,600-83,700 1.85 3/8 B 15.88 13.72 30.78 38.79 323177 —
[26.7-42.4]
1/0 .073 .807 .625 1.519 1.925
83,700-119,500 1.85 3/8 B 20.50 15.88 38.58 48.90 323180 —
[42.4-60.6]
Wire Size Material Dimensions Part Numbers
Circular Mils Thickness Style L ID OD Loose
[mm2] Max. Max. Min. Max. Piece
.578 .061 .141
A14.68 1.55 3.58 323796
22-16 .033 .301 .061 .141
509-3,260 0.84 B7.65 1.55 3.58 323030
[0.26-1.65] .591 .061 .141
C15.01 1.55 3.58 322822
.567 .085 .165
A14.40 2.16 4.19 323795
16-14 .033 .301 .085 .165
2,050-5,180 0.84 B7.65 2.16 4.19 323794
[1.04-2.62] .529 .085 .165
C13.44 2.16 4.19 322824
.565 .129 .226
A14.35 3.28 5.74 323755
12-10 .042 .333 .129 .226
5,180-13,100 1.07 B8.46 3.28 5.74 323754
[2.62-6.64] .703 .129 .226
C17.86 3.28 5.74 323756
8.051 .375 .172 .296
13,100-20,800 1.30 B9.53 4.37 7.52 2-34318-1
[6.64-10.5]
Temperature Rating,
Material and Finish
Terminal Body— Copper per
ASTM B152
Plating —Nickel per QQ-N-290,
650°F [343°C]
Related Product Data
Application Tooling— pages 17-21
Non-Insulation Support Non-Insulation Support
(Wire Range 2 & 1/0)
STRATO-THERM
Terminals & Splices for High Temperature Applications Catalog 82011
Revised 3-98
Uninsulated Terminals and Splices (Continued)
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
11
S o l i s t r a n d
High Temperature
Ring Tongue Terminals
Tongue Dimensions Part Numbers
Wire Size Material Color Stud
Circular Mils Thickness Code Size W C E L Loose Tape
[mm2]Max. Min. Max. Max. Piece Mounted
.218 .156 .337 .449
45.54 3.96 8.56 11.40 321884 2-321884-2
5.218 .156 .337 .449
M3 5.54 3.96 8.56 11.40 321885 —
.281 .250 .431 .574
67.14 6.35 10.95 14.58 321889* 2-321889-3
M3.5 .312 .281 .462 .621
22-16 .033 7.92 7.14 11.73 15.77 322872 —
509-3,260 0.84 Orange .281 .250 .431 .574
[0.26-1.65] 87.14 6.35 10.95 14.58 321890* —
M4 .312 .281 .462 .621
7.92 7.14 11.73 15.77 321895 —
.281 .250 .431 .574
10 7.14 6.35 10.95 14.58 321891* —
.312 .281 .462 .621
7.92 7.14 11.73 15.77 321896 2-321896-4
.250 .171 .352 .480
46.35 4.34 8.94 12.19 322328 —
.250 .171 .352 .480
66.35 4.34 8.94 12.19 322329 2-322329-2
M3.5 .343 .281 .462 .636
8.71 7.14 11.73 16.15 322333 2-322333-3
8.343 .281 .462 .636
16-14 .033 M4 8.71 7.14 11.73 16.15 322334* —
2,050-5,180 0.84 Orange .343 .281 .462 .636
[1.04-2.62] 10 8.71 7.14 11.73 16.15 322335* 2-322335-5
1/4 .468 .437 .618 .855
M6 11.89 11.10 15.70 21.72 322339 —
5/16 .468 .437 .618 .855
M8 11.89 11.10 15.70 21.72 322340 —
.531 .546 .727 .995
3/8 13.49 13.87 18.47 25.27 322343 —
6.375 .281 .549 .739
M3.5 9.53 7.14 13.94 18.77 323059 —
8.375 .281 .549 .739
M4 9.53 7.14 13.94 18.77 323745* —
.375 .281 .549 .739
12-10 .042 10 9.53 7.14 13.94 18.77 323680* 2-323680-5
5,180-13,100 1.07 Orange 1/4 .531 .468 .736 1.004
[2.62-6.64] M6 13.49 11.89 18.69 25.50 323683* 2-323683-2
5/16 .531 .468 .736 1.004
M8 13.49 11.89 18.69 25.50 323746 —
.593 .531 .799 1.098
3/8 15.06 13.49 20.29 27.89 323747 —
8.051 .406 .359 .743 .949
13,100-20,800 1.30 Orange 10 10.31 9.12 18.87 24.10 328822 —
[6.64-10.5]
*Available in small packaging quantities.
Temperature Rating
and Material
Terminal Body— Nickel per
ASTM B162, 1200°F [649°C]
Related Product Data
Application Tooling— pages 17-21
Non-Insulation Support
STRATO-THERM
Terminals & Splices for High Temperature Applications Catalog 82011
Revised 3-98
Uninsulated Terminals and Splices (Continued)
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
12
Tongue Dimensions
Wire Size Material Color Stud Part Number
Circular Mils Thickness Code Size W C E L X
[mm2]Max. Min. Max. Max. Loose Piece
16-14 .033 8.385 .312 .493 .685 .187
2,050-5,180 0.84 Orange M4 9.78 7.92 12.52 17.40 4.75 323905
[1.04-2.62]
S o l i s t r a n d
High Temperature
Spade Tongue Terminals
Temperature Rating
and Material
Terminal Body— Nickel per
ASTM B162, 1200°F [649°C]
Related Product Data
Application Tooling— pages 17-21
Solistrand
High Temperature
Splices
Temperature Rating
and Material
Splice Body —Nickel per
ASTM B162, 1200°F [649°C]
Related Product Data
Application Tooling— pages 17-21
Style-A
Non-Insulation
Support
Butt Splice
Style-B
Non-Insulation
Support
Parallel Splice
Style-C
Non-Insulation
Support
Butt Splice
Dimensions Part Numbers
Wire Size Material Color Style
Circular Mils Thickness Code L ID OD Loose
[mm2] Max. Max. Min. Max. Piece
.578 .061 .141
A14.68 1.55 3.58 322324*
22-16 .033 .301 .061 .141
509-3,260 0.84 Orange B7.65 1.55 3.58 322326
[0.26-1.65] .529 .061 .141
C13.44 1.55 3.58 323876
.567 .085 .165
A14.40 2.16 4.19 322345
16-14 .033 .301 .085 .165
2,050-5,180 0.84 Orange B7.65 2.16 4.19 322347
[1.04-2.62] .529 .085 .165
C13.44 2.16 4.19 323878
.567 .129 .226
A14.40 3.28 5.74 323696*
12-10 .042 .333 .129 .226
5,180-13,100 1.07 Orange B8.46 3.28 5.74 323672
[2.62-6.64] .703 .129 .226
C17.86 3.28 5.74 323698
*Available in small packaging quantities.
Non-Insulation Support
STRATO-THERM
Terminals & Splices for High Temperature Applications Catalog 82011
Revised 3-98
Uninsulated Terminals and Splices (Continued)
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
13
Tongue Dimensions Wire Part Numbers
Wire Size Material Stud Insulation
Circular Mils Thickness Size W C E L Diameter Loose Tape
[mm2]Max. Min. Max. Max. Max. Piece Mounted
.218 .156 .512 .624 .140
45.54 3.96 13.00 15.85 3.56 322363 —
.218 .156 .512 .624 .140
5.54 3.96 13.00 15.85 3.56 322364 —
6.218 .156 .530 .645 .110
M3.5 5.54 3.96 13.46 16.38 2.79 323151 —
.281 .250 .611 .749 .140
7.14 6.35 15.52 19.02 3.56 323199 —
22-16 .281 .250 .611 .749 .140
509-3,260 .033 87.14 6.35 15.52 19.02 3.56 322365 —
[0.26-1.65] 0.84 M4 .281 .250 .629 .770 .110
7.14 6.35 15.98 19.56 2.79 323152 323152-1
.281 .250 .611 .749 .140
10 7.14 6.35 15.52 19.02 3.56 322366 —
.281 .250 .629 .770 .110
7.14 6.35 15.98 19.56 2.79 323153 —
.469 .437 .793 1.031 .140
1/4 11.91 11.10 20.14 26.19 3.56 322367 —
M6 .469 .437 .810 1.051 .110
11.91 11.10 20.57 26.70 2.79 323154 —
.250 .171 .527 .655 .170
46.35 4.34 13.39 16.64 4.32 322371 —
.343 .281 .637 .811 .170
68.71 7.14 16.18 20.60 4.32 322373 —
M3.5 .250 .171 .549 .680 .130
6.35 4.34 13.94 17.27 3.30 323158 —
.343 .281 .637 .811 .170
16-14 88.71 7.14 16.18 20.60 4.32 322374 —
2,050-5,180 .033 M4 .343 .281 .659 .836 .130
[1.04-2.62] 0.84 8.71 7.14 16.74 21.23 3.30 323160 —
.343 .281 .637 .811 .170
10 8.71 7.14 16.18 20.60 4.32 322375 —
.343 .281 .659 .836 .130
8.71 7.14 16.74 21.23 3.30 323161 —
.469 .437 .793 1.030 .170
1/4 11.91 11.10 20.14 26.16 4.32 322376 —
M6 .469 .437 .815 1.055 .130
11.91 11.10 20.70 26.80 3.30 323162 —
6.375 .302 .841 1.034 .230
M3.5 9.53 7.67 21.36 26.26 5.84 323066 —
8.375 .302 .841 1.034 .230
12-10 M4 9.53 7.67 21.36 26.26 5.84 323067 —
5,180-13,100 .042 .375 .302 .841 1.034 .230
[2.62-6.64] 1.07 10 9.53 7.67 21.36 26.26 5.84 323068 323068-1
.375 .302 .840 1.030 .250
9.53 7.67 21.34 26.16 6.35 325154 —
1/4 .531 .468 1.002 1.273 .230
M6 13.49 11.89 25.45 32.33 5.84 323069 —
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
Temperature Rating,
Material and Finish
Terminal Body— Copper per
ASTM B152
Plating —Nickel per QQ-N-290,
650°F [343°C]
Metallic Sleeve— Nickel Silver per
ASTM B122
Insulation Support
Diamond Grip
Heat Resistant
Ring Tongue Terminals
Related Product Data
Application Tooling— pages 17-21
STRATO-THERM
Terminals & Splices for High Temperature Applications Catalog 82011
Revised 3-98
Uninsulated Terminals and Splices (Continued)
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
14
Temperature Rating,
Material and Finish
Splice Body —Copper per
ASTM B152
Plating —Nickel per QQ-N-290,
650°F [343°C]
Metallic Sleeve— Nickel Silver per
ASTM B122
Related Product Data
Application Tooling— pages 17-21
Insulation
Support
Butt Splice
Dimension Wire Part Numbers
Wire Size Material Insulation
Circular Mils Thickness L Diameter Loose
[mm2] Max. Max. Max. Piece
22-16 .033 .889 .140
509-3,260 0.84 22.58 3.56 322823
[0.26-1.65]
16-14 .033 .889 .170
2,050-5,180 0.84 22.58 4.32 322825
[1.04-2.62]
12-10 .042 1.261 .230
5,180-13,100 1.07 32.03 5.84 323757
[2.62-6.64]
Tongue Dimensions Wire Part Numbers
Wire Size Material Stud Body Sleeve Insulation
Circular Mils Thickness Size WC E L Material Color Diameter Loose Tape
[mm2]Max. Min. Max. Max. Code Max. Piece Mounted
.218 .156 .512 .624 .140
45.54 3.96 13.00 15.85 Nickel Orange 3.56 321887 —
.281 .250 .611 .749 .140
7.14 6.35 15.52 19.02 Nickel Orange 3.56 321892 —
6.312 .281 .637 .796 .140
M3.5 7.92 7.14 16.18 20.22 Nickel Orange 3.56 322873 —
.312 .281 .637 .796 .140
7.92 7.14 16.18 20.22 Chromel Gray 3.56 2-322873-1 —
.281 .250 .611 .749 .140
7.14 6.35 15.52 19.02 Nickel Orange 3.56 321893 —
.312 .281 .637 .796 .140
87.92 7.14 16.18 20.22 Nickel Orange 3.56 321897 —
22-16 M4 .312 .281 .637 .796 .140
509-3,260 .033 7.92 7.14 16.18 20.22 Chromel Gray 3.56 1-321897-0 —
[0.26-1.65] 0.84 .312 .281 .637 .796 .140
7.92 7.14 16.18 20.22 Alumel Green 3.56 1-321897-3 —
.468 .437 .793 1.031 .140
11.89 11.10 20.14 26.19 Nickel Orange 3.56 184204-1 —
.281 .250 .611 .749 .140
7.14 6.35 15.52 19.02 Nickel Orange 3.56 321894 —
.312 .281 .637 .796 .140
10 7.92 7.14 16.18 20.22 Nickel Orange 3.56 321898 —
.312 .281 .637 .796 .140
7.92 7.14 16.18 20.22 Chromel Gray 3.56 1-321897-4 —
.312 .281 .637 .796 .140
7.92 7.14 16.18 20.22 Alumel Green 3.56 1-321898-0 —
1/4 .468 .437 .793 1.031 .140
M6 11.89 11.10 20.14 26.19 Nickel Orange 3.56 322320 —
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
Temperature Rating and
Material
Terminal Body— See table, 1200°F
[649°C], Nickel per ASTM B162,
Alumel —, Chromel—
Metallic Sleeve— Nickel Silver per
ASTM B122
Insulation Support
Diamond Grip
High Temperature
Ring Tongue Terminals
Related Product Data
Application Tooling— pages 17-21
Diamond Grip
Heat Resistant
S p l i c e s
STRATO-THERM
Terminals & Splices for High Temperature Applications Catalog 82011
Revised 3-98
Uninsulated Terminals and Splices (Continued)
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
15
Tongue Dimensions Wire Part Numbers
Wire Size Material Stud Body Sleeve Insulation
Circular Mils Thickness Size WC E L Material Color Diameter Loose Tape
[mm2]Max. Min. Max. Max. Code Max Piece Mounted
.250 .171 .527 .655 .170
66.35 4.34 13.39 16.64 Nickel Orange 4.32 322332 —
M3.5 .343 .281 .637 .811 .170
8.71 7.14 16.18 20.60 Nickel Orange 4.32 322336 2-322336-2
.343 .281 .637 .811 .170
8.71 7.14 16.18 20.60 Nickel Orange 4.32 322337 1-322337-2
8.343 .281 .637 .811 .170
M4 8.71 7.14 16.18 20.60 Chromel Gray 4.32 1-322337-0 —
.343 .281 .637 .811 .170
16-14 .033 8.71 7.14 16.18 20.60 Alumel Green 4.32 1-322338-1 —
2,050-5,180 0.84 .343 .281 .637 .811 .170
[1.04-2.62] 8.71 7.14 16.18 20.60 Nickel Orange 4.32 322338 1-322338-2
.343 .281 .637 .811 .170
10 8.71 7.14 16.18 20.60 Chromel Gray 4.32 1-322337-1 —
.343 .281 .637 .811 .170
8.71 7.14 16.18 20.60 Alumel Green 4.32 1-322338-0 —
1/4 .468 .437 .793 1.030 .170
M6 11.89 11.10 20.14 26.16 Nickel Orange 4.32 322341 —
.531 .546 .902 1.170 .170
3/8 13.49 13.87 22.91 29.72 Nickel Orange 4.32 322344 —
6.375 .281 .815 1.008 .230
M3.5 9.53 7.14 20.70 25.60 Nickel Orange 5.84 323748 —
.375 .281 .815 1.008 .230
89.53 7.14 20.70 25.60 Nickel Orange 5.84 323749 —
M4 .375 .281 .815 1.008 .230
9.53 7.14 20.70 25.60 Chromel Gray 5.84 2-323749-1 —
12-10 .042 .375 .281 .815 1.008 .230
5,180-13,100 1.07 10 9.53 7.14 20.70 25.60 Nickel Orange 5.84 323750 2-323750-5
[2.62-6.64] .375 .281 .815 1.008 .230
9.53 7.14 20.70 25.60 Alumel Green 5.84 2-323750-1 —
1/4 .531 .468 1.002 1.273 .230
M6 13.49 11.89 25.45 32.33 Nickel Orange 5.84 323751 —
5/16 .531 .468 1.002 1.273 .230
M8 13.49 11.89 25.45 32.33 Nickel Orange 5.84 323752 —
Note: “C” dimension applies from edge of metal wire barrel to center of stud hole.
Diamond Grip
High Temperature
Ring Tongue Terminals
(Continued)
STRATO-THERM
Terminals & Splices for High Temperature Applications Catalog 82011
Revised 3-98
Uninsulated Terminals and Splices (Continued)
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
16
Temperature Rating
and Material
Splice Body —See table, 1200°F
[649°C], Nickel per ASTM B162,
Alumel —, Chromel—
Metallic Sleeve— Nickel Silver per
ASTM B122
Related Product Data
Application Tooling— pages 17-21
Insulation
Support
Butt Splice
Dimension Wire Part Numbers
Wire Size Material Splice Sleeve Insulation
Circular Mils Thickness L Body Color Diameter Loose
[mm2]Max. Max. Material Code Max. Piece
.889 .140
22.58 Nickel Orange 3.56 322325
22-16 .033 .889 .140
509-3,260 0.84 22.58 Alumel Green 3.56 1-322325-0
[0.26-1.65] .889 .140
22.58 Chromel Gray 3.56 1-322325-1
.889 .170
22.58 Nickel Orange 4.32 322346
16-14 .033 .889 .170
2,050-5,180 0.84 22.58 Alumel Green 4.32 1-322346-0
[1.04-2.62] .889 .170
22.58 Chromel Gray 4.32 1-322346-1
12-10 .042 1.261 .230
5,180-13,100 1.07 32.03 Nickel Orange 5.84 323699
[2.62-6.64]
Diamond Grip
High Temperature
Splices
STRATO-THERM
Terminals & Splices for High Temperature Applications Catalog 82011
Revised 3-98
Application Tooling Information for STRATO-THERM Insulated Heat
Resistant and High Temperature Terminals and Splices
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
17
Pneumatic Tooling For
Tooling Tape Mounted Products
AMP Dies for 626 Pneumatic Tools Dies for 69875
Product Wire Hand 189721-[ ] and 189722-[ ] AMP-TAPETRONIC
Type Size Tools require Straight Action Adapter1AMP-O-LECTRIC2
217200-1 or “C” Head Adapter 318161-1 Requires Applicator
Dies also fit 69710-1 Hand Tool AMPOMATOR CLS IV2
Requires Applicators
26-24 69731 —
Pre-Insulated 22-20 69692-1 69732 69936
Terminals 18-16 69733 69937
14 69693-1 69734 —
12-10 — 69735 —
Pre-Insulated 22-20 — 69327 —
Splices 18-16 — 69328 —
14-12 — 69329 —
1Straight Action Adapter 217200-1 is used with Tools 189721-1 or 189722-1. “C”Head Adapter 318161-1 is used with
Tools 189721-2 or 189722-2. Both adapters require the use of non-ratchet tool holder 189928-1 or ratchet tool holder
3 5 6 3 0 4 - 1 .
2Call Tooling Assistance Center for Machine and Applicator part numbers.
Wire Size Range
AWG 26-10
Hydraulic and Battery Powered
AMP Tools With Interchangeable Dies
Product Wire Hand 690972690992
Type Size Tools “C” Head “C”
Nest Indent Head
26-24 45730 — — —
Post Insulated 22-20 46467, 464681— — —
Terminals 18-16 46468 — — —
and Splices 8 — 46146 46145 69216
6 — 46134 46133 69217
1Part Number 55235-1 only
2These crimping heads are recommended for use only with AMP Hydraulic Hand Pump 314979-1, DYNA-CRIMP
Hydraulic Power Units 69120-1 (115 VAC) and 69120-2 (230 VAC), and with DYNA-CRIMP II Battery Operated
Hydraulic Power Unit 122271-1. See pages 20 & 21.
Wire Size Range
AWG 26-6
Pneumatic Tooling For
Tooling Tape Mounted Products
Dies for 69875
Product AMP Hand Crimping Heads for AMP-TAPETRONIC
Type Wire Tools 626 Pneumatic Tool AMP-O-LECTRIC2
Size 189721-1 and 189722-11Requires Applicator
AMPOMATOR CLS IV2
Requires Applicators
Uninsulated 46673
Terminals 22-16 46673-1 356744-1 69930
and Splices 46988
with Insulation 16-14 59294 356744-2 69931
Support 12-10 59461 904870-1 69932
Uninsulated 22-16 69954
Terminals
and Splices 16-14 46447 217206-1 69955
with Non-Insulation
Support 12-10 69956
1Crimping Heads require the use of non-ratchet tool holder 189767-1 or ratchet tool holder 356302-1.
2Call Tooling Assistance Center for Machine and Applicator part numbers.
STRATO-THERM
Terminals & Splices for High Temperature Applications Catalog 82011
Revised 3-98
Application Tooling Information for STRATO-THERM Uninsulated Heat
Resistant and High Temperature Terminals and Splices
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
18
Wire Size Range
AWG 22-10
Pneumatic Hydraulic Tools WIth Hydraulic and Battery Powered
Tooling Self Contained Dies Tools with Interchangeable Dies
Product AMP Hand 59973-1 Hand Tool,
Type Wire Tools 69015 Hand Latch 690652& 690672690972690992
Size Head Tool Head Latch Heads “C” Head “C”
Nest Indent Nest Indent Head
8 69355149956 48126 48355 — — 69216
Uninsulated 59083
Terminals 6 No CERTI- 48172 48128 — — 69217
and Splices CRIMP 59975-1 690692
with 4 — 48173 48129 48127 46135 69218
Non-Insulation 46133
Support 2 — 48174 48130 46136 45433
1/0 — 48183 — — 48132 48131 46138 46137 45436
1CERTI-CRIMPHand Tool.
2These crimping heads are recommended for use only with AMP Hydraulic Hand Pump 314979-1, DYNA-CRIMP Hydraulic Power Units 69120-1 (115 VAC)
and 69120-2 (230 VAC), and with DYNA-CRIMP II Battery Operated Hydraulic Power Unit 122271-1. See Pages 20 & 21.
Wire Size Range
AWG 8-1/0
For additional tooling information, call 1-800-722-1111.
Catalog 82011
Revised 3-98
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
19
STRATO-THERM
Terminals & Splices for High Temperature Applications
Application Tooling Information for STRATO-THERM Heat Resistant and
High Temperature Terminals and Splices
Loose Form Terminal
and Splice Tooling CERTI-CRIMP Hand Tools
Pneumatic Tools
Hydraulic Hand Tools
“C” Head Straight
Action Hand Tool
Part No. 69710-1
Straight Action Double
Action Hand Tool
Double Action
Hand Tool Heavy Head Hand Tool
Part No. 69355
T-Head Tool
Part No. 69015
Part No. 59973-1
(Dies Required)
Part No. 59975-1
(Self Contained Dies)
6-26 Pneumatic Tool
Part No. 189721-1
For additional tooling information, call 1-800-722-1111.
Catalog 82011
Revised 3-98
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
20
STRATO-THERM
Terminals & Splices for High Temperature Applications
Application Tooling Information for STRATO-THERM Heat Resistant and
High Temperature Terminals and Splices (Continued)
Tape Mounted
AMP-TAPETRONIC Machine
69875, 68250-1
(Requires Dies)
AMP-O-LECTRIC, Model “G” Machine
(Requires Applicator and Dies) AMPOMATOR CLS IV Machine 217500-1
(Requires Applicators and Dies)
Part No.
69099
Part No.
69065
Part No. 69069
(Self Contained Dies)
Part No.
69067
Part No.
69097
For additional tooling information, call 1-800-722-1111.For additional tooling information, call 1-800-722-1111.
Latch Heads and Dies
STRATO-THERM
Terminals & Splices for High Temperature Applications Catalog 82011
Revised 3-98
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
21
AMP application tools are designed to
produce a carefully controlled uniform
pressure crimp, regardless of how they
are powered. All tools shown are
specially designed for AMP products
and are precision machined from hard
tool steel.
Hand Operated Power Unit
314979-12(Hose, head and dies not included)
Refer to the table below for accessories.
Part No. 122271-14Power Unit Only
(Includes Pressure Release)
115 Volts (60 Hz)—69120-13
230 Volts (60 Hz)—69120-23
DYNA-CRIMP Electric
Hydraulic Power Unit
DYNA-CRIMP II
Battery Operated
Hydraulic Power Unit
Power Units Accessories
For Use With Accessory Description Accessory Remarks
Power Unit No. Part No.
7' Handle Control Assembly—Hose & Cord 59907-7
15' Handle Control Assembly—Hose & Cord 1-59907-5
21' Handle Control Assembly—Hose & Cord 2-59907-1
28' Handle Control Assembly—Hose & Cord 2-59907-8
369120-1315' Foot Switch Assembly 68284-1 Need Hose Assembly
369120-233' Hose Assembly 59909-3 68284-1 Foot Switch
314979-127' Hose Assembly 59909-7 Assembly needed with
122271-1415' Hose Assembly 1-59909-5 these Hose Assemblies
21' Hose Assembly 2-59909-1 and 69120
2' Hose Assembly (1/4" I.D.) 314990-1 More Flexible, Lighter Weight.
3' Hose Assembly (1/4" I.D.) 314990-2 Recommended for use with
7' Hose Assembly (1/4" I.D.) 314990-3 DYNA-CRIMP II Battery
15' Hose Assembly (1/4" I.D.) 314990-4 Operated Hydraulic Power Un i t
69120-133-Way Multi-Directional Valve 592201For use with
69120-233-Way Multi-Directional Valve (Elec.Ctl.) 59220-21Foot Switch only
1Contact AMP Incorporated for usage recommendations.
2Also see AMP Customer Manual 409-5860.
3Also see AMP Customer Manual 409-1950.
4Also see AMP Customer Manual 409-5869.
Note: All Hoses and Handle Control Assemblies have a 3/8" high flow male coupler (311470-1) on each end.
All Power Units and Heads have a 3/8" high flow female coupler (311471-1).
Typical interchangable hose,
head and dies not included
Handle
Control Hose
Assembly Foot
Control Multidirectional
Valve
Application Tooling Information for STRATO-THERM Heat Resistant and
High Temperature Terminals and Splices
For additional tooling information, call 1-800-722-1111.
34318 10
50829 5
50830 5
50831 5
50832 5
50834 5
50835 5
50836 5
50837 5
50838 5
50839 5
50840 5
50841 5
50844 6
50845 6
50846 6
50847 6
50848 6
53572 6
53587 6
55114 6
55235 8
184204 14
321884 11
321885 11
321887 14
321889 11
321890 11
321891 11
321892 14
321893 14
321894 14
321895 11
321896 11
321897 14
321898 14
322320 14
322324 12
322325 16
322326 12
322328 11
322329 11
322332 15
322333 11
322334 11
322335 11
322336 15
322337 15
322338 15
322339 11
322340 11
322341 15
322343 11
322344 15
322345 12
322346 16
322347 12
322363 13
322364 13
322365 13
322366 13
Part No. Page 322367 13
322371 13
322373 13
322374 13
322375 13
322376 13
322693 9
322694 9
322695 9
322733 9
322797 9
322798 9
322799 9
322805 9
322822 10
322823 14
322824 10
322825 14
322872 11
322873 14
323030 10
323059 11
323060 9
323061 9
323062 9
323063 9
323064 9
323065 9
323066 13
323067 13
323068 13
323069 13
323151 13
323152 13
323153 13
323154 13
323158 13
323160 13
323161 13
323162 13
323165 9
323166 9
323167 9
323168 9
323169 9
323170 9
323171 9
323172 9
323173 10
323174 10
323175 10
323177 10
323180 10
323199 13
323219 9
323672 12
323680 11
323683 11
323696 12
323698 12
323699 16
Part No. Page 323745 11
323746 11
323747 11
323748 15
323749 15
323750 15
323751 15
323752 15
323754 10
323755 10
323756 10
323757 14
323794 10
323795 10
323796 10
323876 12
323878 12
323905 12
324061 9
324370 8
325154 13
326760 8
326835 8
328822 11
328854 7
328855 7
328856 7
328857 7
328858 7
328859 7
328860 7
328861 7
329580 8
329583 8
329647 8
329716 8
330377 7
330378 7
330379 7
332433 5
332434 5
332438 5
332439 5
332446 6
332453 5
332454 5
Part No. Page
N o t e : This index lists all cataloged parts by
base no. only. Complete part nos. (with
prefixes and/or suffixes) are shown on the
page(s) indicated.
STRATO-THERM
Terminals & Splices for High Temperature Applications Catalog 82011
Revised 3-98
For drawings, technical data or samples, contact your AMP sales engineer or call the AMP Product Information Center 1-800-522-6752.
Dimensions are in inches and millimeters unless otherwise specified. Values in brackets are metric equivalents.
Specifications subject to change. Consult AMP for latest specifications.
22
Part Number Index
STRATO-THERM
Terminals & Splices for High Temperature Applications Catalog 82011
Revised 3-98
23
Engineering Notes
AMP Incorporated, Harrisburg, PA 17105; Phone: 717-564-0100; FAX: 717-986-7575
Product Information Center; Phone: 1-800-522-6752
AMP Incorporated, Harrisburg, PA 1710 5-3608. Contact your regiona l center : USA 717-564-0 100. Canada 905-470-4425.
United Kingdom 44-1753 - 676800. Singapore 65-482-0311. Japan 81-44-813-8 502. O n the internet at http://www.amp.com
82011—1.5M—AG—AMP—3-98—1405 AMP and Connecting at a Higher Level are trademarks. Rev. 1, 10/97
Printed in USA
Americas
Argentina – Buenos Aires
Phone: + 54-1-733-2000
Fax: + 54-1-717-0988
Brazil – Sao Paulo
Phone: + 55-11-861-1311
Fax: + 55-11-861-0397
Canada – Toronto
Phone: + 1-905-475-6222
Fax: + 1-905-474-5520
E u r o pe/Middle East/A f r i c a
Austria – Vienna
Inside: Phone: + 0222-277-97-0
Fax: + 0222-270-26-61
Outside: Phone: + 43-1-277-97-0
Fax: + 43-1-270-26-61
Belgium – Brussels
Phone: + 32-2-719-2511
Fax: + 32-2-725-4928
Bulgaria – Sofia
Phone: + 359-2-971-2152
Fax: + 395-2-971-2153
Croatia – Zagreb
Phone: + 385-1-67-04-46
Fax: + 385-1-69-16-04
Czech Republic – Kurim
Phone: + 420-5-41-162-111
Fax: + 420-5-41-162-223
Denmark – Viby
Phone: + 45-86-295-055
Fax: + 45-86-295-133
Egypt – Cairo
Phone: + 202-417-76-47
Fax: + 202-419-23-34
Estonia – Tallinn
Phone: + 372-6205-800
Fax: + 372-6205-804
Finland – Helsinki
Phone: + 358-9-512-3420
Fax: + 358-9-512-34250
France – Pontoise
Phone: + 33-1-34-20-88-88
Fax: + 33-1-34-20-86-00
Germany – Langen
Phone: + 49-6103-709-0
Fax: + 49-6103-709-223
Related Businesses
AMP Circuits Division
Greenville, SC, USA
Phone: + 1-864-297-4100
Fax: + 1-864-675-7099
AMP Circuits and Packaging,
EMEA
Dublin, Ireland
Phone: + 353-1-820-6500
Fax: + 353-1-820-6501
AMP Packaging and
Carroll Touch Systems Division
Round Rock TX, USA
Phone: + 1-512-244-5100
Fax: + 1-512-244-7040
AMP-Simel S.A.
Gevrey-Chambertin, France
Phone: + 33-3-8058-3200
Fax: + 33-3-8034-1015
ARA-Applied Robotics Division
Rousset, France
Phone: + 33-4-42-29-1200
Fax: + 33-4-42-29-1212
Carroll Touch International, Ltd.
Tokyo, Japan
Phone: + 81-03-5306-2100
Fax: + 81-03-5306-2105
DSM Decolletage S.A.
Saint-Maurice
Phone: + 41-24-486-2486
Fax: + 41-24-486-2400
Fibernet Division
Rowville, Australia
Phone: + 61-3-9764-2111
Fax: + 61-3-9764-2120
Wellington, New Zealand
Phone: + 64-4-237-9195
Fax: + 64-4-237-9195
HTS Elektrotechnik GmbH
Neunkirchen, Germany
Phone: + 49-2247-305-0
Fax: + 49-2247-305-22
M/A-COM Division
Americas
Lowell, MA, USA
Phone: + 1- 978-442-5000
Fax: + 1-978-442-5354
Europe/Middle East/Africa
Bracknell, England
Phone: + 44-1344-869-595
Fax: + 44-1344-300-020
Asia/Pacific
Hong Kong
Phone: + 85-2-2111-8088
Fax: + 85-2-2111-8087
Madison Cable Corporation
Worcester, MA, USA
Phone: + 1-508-752-7320
Fax: + 1-508-752-4230
Madison Cable Ltd.
Dundee, Scotland
Phone: + 44-1382-508080
Fax: + 44-1382-505060
Precision Interconnect Division
Portland, OR, USA
Phone: + 1-503-620-9400
Fax: + 1-503-620-7131
AMP Business Centers, Worldwide
Chile – Santiago
Phone: + 56-2-236-4267
Fax: + 56-2-235-0061
Columbia – Bogata
Phone: + 57-1-369-0045
Fax: + 57-1-269-7525
Mexico – Mexico City
Phone: + 52-5-398-76-11
Fax: + 52-5-398-79-64
United States – Harrisburg, PA
Phone: + 1-717-564-0100
Fax: + 1-717-986-7575
For Latin/South American
Countries not shown
Phone: +54-1-733-2015
Fax: +54-1-733-2083
Great Britain – London
Phone: + 44-181-954-2356
Fax: + 44-181-954-6234
Greece – Athens
Phone: + 30-1-902-5515
Fax: + 30-1-902-4237
Holland – ’s-Hertogenbosch
Phone: + 31-73-624-6246
Fax: + 31-73-621-2365
Hungary – Budapest
Phone: + 36-1-344-2633
Fax: + 36-1-344-2634
Ireland – Dublin
Phone: + 353-1-820-3000
Fax: + 353-1-820-9790
Israel – Tel Aviv
Phone: + 972-3-645-07-07
Fax: + 972-3-649-24-13
Italy – Torino
Phone: + 39-11-4012-111
Fax: + 39-11-4031-116
Lithuania – Vilnius
Phone: + 370-2-231402
Fax: + 370-2-231403
Norway – Oslo
Phone: + 47-66-77-88-50
Fax: + 47-66-77-88-55
Poland – Warsaw
Phone: + 48-22-672-47-90/91/92
Fax: + 48-22-672-47-88
Portugal – Lisbon
Phone: + 351-1-387-70-16
Fax: + 351-1-387-71-72
Romania – Bucharest
Phone: + 40-1-311-3479/3596
Fax: + 40-1-312-0574
Russia
Moscow
Phone: + 7-095-926-5506/07/08/09
Fax: + 7-095-926-5505
St. Petersburg
Phone: + 7-812-325-3083
Fax: + 7-812-326-3288
Slovakia – Bystrica
Phone: + 421-88-761-120/121
Fax: + 421-88-761-122
Slovenia – Ljubljana
Phone: + 386-61-161-3270
Fax: + 386-61-161-3240
South Africa – Johannesburg
Phone: + 27-11-805-65-35
Fax: + 27-11-805-65-40
Spain – Barcelona
Phone: + 34-3-291-0330
Fax: + 34-3-201-7879
Sweden – Stockholm
Phone: + 46-8-580-833-00
Fax: + 46-8-580-194-70
Switzerland – Steinach
Phone: + 41-71-447-0447
Fax: + 41-71-447-0444
Turkey – Istanbul
Phone: + 90-212-281-8181
Fax: + 90-212-281-8184
For Middle East/African
Countries not shown
Phone: +33-1-34-20-83-83
Fax: +33-1-34-20-86-09
Asia/Pacific
Australia – Sidney
Phone: + 61-2-9840-8200
Fax: + 61-2-9899-5649
India – Bangalore
Phone: + 91-80-845-3014
Fax: + 91-80-845-3038
Indonesia – Jakarta
Phone: + 6221-526-7852
Fax: + 6221-526-7856
Japan – Tokyo
Phone: + 81-44-844-8111
Fax: + 81-44-812-3207
Korea – Seoul
Phone: + 82-3274-0535
Fax: + 82-3274-0524
Malaysia – Kuala Lampur
Phone: + 603-705-3055
Fax: + 603-705-3066
New Zealand – Auckland
Phone: + 64-9-634-4580
Fax: 64-9-634-4586
Peoples Republic of China
Hong Kong
Phone: + 852-2-35-1628
Fax: + 852-2-35-0243
Shangha
Phone: + 86-21-6485-0602
Fax: + 86-21-6485-0728
Shunde
Phone: + 86-765-7751368
Fax: + 86-765-7752823
Philippines – Manila
Phone: + 632-811-0437
Fax: + 632-811-0441
Singapore – Singapore
Phone: + 65-482-0311
Fax: + 65-482-1012
Taiwan – Taipei
Phone: + 886-2-704-4815
Fax: + 886-2-704-4940
Thailand – Bangkok
Phone: + 91-662-513-9888
Fax: + 91-662-513-9889
Vietnam – Ho Chi Minh City
Phone: + 84-8823-2546
Fax: + 84-8823-1443
w w w . a m p . c o m
