LMS1585AIS-3.3 - Texas Instruments High-Performance Analog

Tab is

VOUT

INPUT

OUTPUT

ADJ/GND

VOUT INPUT

OUTPUT

ADJ/GND

LMS1585A/87-3.3VIN 4.75V 3.3V

3A, 5A

+ + C2*

10 µF

* Required for Stability

LMS1585A , LMS1587

www.ti.com

SNVS061G –MONTH 2003–REVISED JULY 2013

LMS1585A 5A/LMS1587 5A and 3A Low Dropout Fast Response Regulators

Check for Samples: LMS1585A ,LMS1587

1FEATURES DESCRIPTION

The LMS1585A and LMS1587 are low dropout

234• Fast Transient Response positive regulators with output load current of 5A and

• Available in Adjustable, 1.5V, and 3.3V 3A respectively. Their low dropout voltage (1.2V) and

versions fast transient response make them an excellent

• Current Limiting and Thermal Protection solution for low voltage microprocessor applications.

• Commercial Temp. Tange: 0°C to 125°C The LMS1585A/87 are available in adjustable

versions, which can set the output voltage with only

• Industrial Temp. Range: −40°C to 125°C two external resistors. In addition, they are also

• Line Regulation 0.005% (typical) available in 1.5V and 3.3V fixed voltage versions(1).

• Load Regulation 0.05% (typical) The LMS1585A/87 circuits include a zener trimmed

• Direct Replacement for LT®1585A/87 bandgap reference, current limiting and thermal

shutdown. The LMS1585A/87 series are available in

APPLICATIONS KTT (TO-263) and NDE (TO-220) packages.

• Pentium®processor supplies

• PowerPC®supplies

• Other microprocessor supplies

• Low voltage logic supplies (1) Consult factory for other fixed voltage options.

Typical Application

Figure 1. NDE (TO-220) Figure 2. KTT (TO-263)

(Top View) (Top View)

1Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of

Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

2PowerPC is a registered trademark of IBM.

3Pentium is a registered trademark of Intel Corporation.

4LT is a registered trademark of Linear Technology.

Products conform to specifications per the terms of the Texas

Instruments standard warranty. Production processing does not

necessarily include testing of all parameters.

Thermal

Limit

VIN

VOUT

Substrate

GND (Fixed Output)

tADJ. (Adjustable Output)ttt

LMS1585A , LMS1587

SNVS061G –MONTH 2003–REVISED JULY 2013

www.ti.com

Table 1. LMS1585A/LMS1587 Device Options

Operating

Part Number Output Voltage Package Drawing Package Type Output Current

Temperature

LMS1585AIS-1.5 1.5V -40°C to 125°C

LMS1585AIS-3.3 3.3V

LMS1585ACS-ADJ Adjustable KTT TO-263 5A

LMS1585ACS-1.5 1.5V

LMS1585ACS-3.3 3.3V 0°C to 125°C

LMS1585ACT-1.5 1.5V NDE TO-220 5A

LMS1585ACT-3.3 3.3V

LMS1587IS-ADJ Adjustable

LMS1587IS-1.5 1.5V –40°C to 125°C

LMS1587IS-3.3 3.3V KTT TO-263

LMS1587CS-ADJ Adjustable

LMS1587CS-3.3 3.3V 0°C to 125°C 3A

LMS1587CS-1.5 1.5V

LMS1587IT-1.5 1.5V –40°C to 125C

LMS1587CT-ADJ Adjustable NDE TO-220

0°C to 125°C

LMS1587CT-3.3 3.3V

These devices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam

during storage or handling to prevent electrostatic damage to the MOS gates.

Product Folder Links: LMS1585A LMS1587

LMS1585A , LMS1587

www.ti.com

SNVS061G –MONTH 2003–REVISED JULY 2013

ABSOLUTE MAXIMUM RATINGS(1)(2)

Maximum Input to Output Voltage (VIN to GND) 13V

Power Dissipation(3) Internally Limited

Junction Temperature (TJ)(3) 150˚C

Storage Temperature Range -65˚C to 150˚C

Lead Temperature 260˚C, 10 sec

ESD Tolerance(4) 2000V

(1) Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for

which the device is intended to be functional, but specific performance is not ensured. For ensured specifications and the test

conditions, see the Electrical Characteristics.

(2) If Military/Aerospace specified devices are required, please contact the TI Sales Office/ Distributors for availability and specifications.

(3) The maximum power dissipation is a function of TJ(max) ,θJA, and TA. The maximum allowable power dissipation at any ambient

temperature is PD= (TJ(max)–T A)/θJA. All numbers apply for packages soldered directly into a PC board.

(4) For testing purposes, ESD was applied using human body model, 1.5 kΩin series with 100 pF.

Product Folder Links: LMS1585A LMS1587

LMS1585A , LMS1587

SNVS061G –MONTH 2003–REVISED JULY 2013

www.ti.com

ELECTRICAL CHARACTERISTICS

Typicals and limits appearing in normal type apply for TJ= 25˚C. Limits appearing in Boldface type apply over the entire

junction temperature range for operation, 0˚C to 125˚C for commercial grade and −40˚C to 125˚C for industrial grade.

Symbol Parameter Conditions Min(1) Typ(2) Max(1) Units

VREF Reference Voltage LMS1585A-ADJ

VIN−VOUT = 3V, IOUT = 10mA 1.238 1.250 1.262 V

10mA ≤IOUT ≤5A, 1.5V ≤VIN−VOUT ≤5.75V 1.225 1.250 1.275 V

LMS1587-ADJ

10mA ≤IOUT ≤3A, 1.5V ≤VIN−VOUT ≤5.75V 1.225 1.250 1.275 V

VOUT Output Voltage LMS1585A-1.5

IOUT = 0mA, VIN = 5V 1.485 1.500 1.515 V

0≤IOUT ≤5A, 3V ≤VIN ≤7V 1.470 1.530 V

LMS1585A-3.3

IOUT = 0mA, V IN = 5V 3.267 3.300 3.333 V

0≤IOUT ≤5A, 4.75V ≤VIN ≤7V 3.235 3.300 3.365 V

LMS1587-1.5

VIN = 5V, I OUT = 0mA, TJ = 25˚C 1.485 1.500 1.515 V

0≤IOUT ≤3A, 3V ≤VIN ≤7V 1.470 1.500 1.530 V

LMS1587-3.3

0≤IOUT ≤3A, 4.75V ≤VIN ≤7V 3.235 3.300 3.365 V

∆VOUT Line Regulation(3) LMS1585A/87-ADJ

IOUT = 10mA, 2.75V ≤VIN ≤7V 0.005 0.2 %

LMS1585A/87-3.3

IOUT = 0mA, 4.75V ≤VIN ≤7V 0.005 0.2 %

LMS1585A/87-1.5

IOUT = 0mA, 3V ≤VIN ≤7V 0.005 0.2 %

∆VOUT Load Regulation(3) LMS1585A-ADJ 0.3 %

VIN−VOUT = 3V, 10mA ≤IOUT ≤5A 0.05 0.5

LMS1585A-1.5/LMS1585A-3.3 0.05 0.3 %

VIN = 5V, 0 ≤IOUT ≤5A 0.05 0.5

LMS1587-ADJ 0.05 0.3

VIN−VOUT = 3V, 10mA ≤IOUT ≤3A 0.05 0.5 %

LMS1587-1.5/LMS1587-3.3 0.05 0.3 %

VIN = 5V, 0 ≤IOUT ≤3A 0.05 0.5 %

VIN−VOUT Dropout Voltage LMS1585A-ADJ/LMS1587-ADJ

∆VREF = 1%, IOUT = 3A 1.15 1.3 V

LMS1585A-3.3/LMS1587-3.3/

LMS1585A-1.5/LMS1587-1.5

∆VOUT = 1%, IOUT = 3A 1.15 1.3 V

LMS1585A-ADJ

∆VREF = 1%, IOUT = 5A 1.2 1.4 V

LMS1585A-1.5/LMS1585A-3.3

∆VOUT = 1%, IOUT = 5A 1.2 1.4 V

(1) All limits are specified by testing or statistical analysis.

(2) Typical Values represent the most likely parametric norm.

(3) Load and line regulation are measured at constant junction temperature, and are ensured up to the maximum power dissipation of 30W.

Power dissipation is determined by the input/output differential and the output current. Ensured maximum power dissipation will not be

available over the full input/output range.

Product Folder Links: LMS1585A LMS1587

LMS1585A , LMS1587

www.ti.com

SNVS061G –MONTH 2003–REVISED JULY 2013

ELECTRICAL CHARACTERISTICS (continued)

Typicals and limits appearing in normal type apply for TJ= 25˚C. Limits appearing in Boldface type apply over the entire

junction temperature range for operation, 0˚C to 125˚C for commercial grade and −40˚C to 125˚C for industrial grade.

ILIMIT Current Limit LMS1585A-ADJ/LMS1585A-3.3/LMS1585A-1.5

VIN−VOUT = 5.5V 5.0 6.6 A

LMS1587-ADJ/LMS1587-3.3/LMS1587-1.5

VIN−VOUT = 5.5V 3.1 4.3 A

Minimum Load LMS1585A/87-ADJ

Current (4) 1.5V ≤VIN−VOUT ≤5.75V 2.0 10.0 mA

Quiescent Current LMS1585A-3.3/LMS1587-3.3/

LMS1585A-1.5/LMS1587-1.5

VIN = 5V 7.0 13.0 mA

Thermal Regulation TA = 25˚C, 30ms Pulse 0.003 %/W

Ripple Rejection LMS1585A-ADJ

fRIPPLE = 120Hz, VIN−VOUT = 3V,

IOUT = 5A, COUT = 25µF Tantalum 72 dB

LMS1585A-1.5

fRIPPLE = 120Hz, COUT = 25µF

Tantalum, IOUT = 5A, VIN = 4.5V 60 72 dB

LMS1585A-3.3

fRIPPLE = 120Hz, COUT = 25µF

Tantalum, IOUT = 5A, VIN = 6.3V 72 dB

LMS1587-ADJ

fRIPPLE = 120 Hz, VIN−VOUT = 3V, IOUT = 3A

COUT = 25 µF Tantalum 72 dB

LMS1587-1.5

fRIPPLE = 120 Hz, COUT = 25µF Tantalum,

IOUT = 3A, VIN = 4.5V 60 72 dB

LMS1587-3.3

fRIPPLE = 120 Hz, COUT = 25µF Tantalum,

IOUT = 3A, VIN = 6.3V 72 dB

Adjust Pin Current 55 120 µA

Adjust Pin Current 10mA ≤IOUT ≤IFULLLOAD,

1.5V ≤VIN−VOUT ≤5.75V(5) 0.2 µA

Temperature Stability 0.5 %

Long Term Stability TA = 125˚C, 1000Hrs 0.03 %

RMS Output Noise 10Hz ≤f≤10kHz 0.003 %

(% of VOUT)

Thermal Resistance 3-Lead KTT (TO-263): Control/Output Section 0.65/2.7 *C/W

Junction-to-Case 3-Lead NDE (TO-220): Control/Output Section 0.65/2.7 *C/W

(4) The minimum output current required to maintain regulation.

(5) IFULLLOAD is 5A for LMS1585A and 3A for LMS1587.

Product Folder Links: LMS1585A LMS1587

VOUT

VIN

10 µF

VREF

10 µF

IADJ

VIN VOUT

ADJ

VOUT = VREF (1 + R2) + IADJR2

LMS1585A , LMS1587

SNVS061G –MONTH 2003–REVISED JULY 2013

www.ti.com

APPLICATION NOTE

OUTPUT VOLTAGE

The adjustable version develops at 1.25V reference voltage, (VREF), between the output and the adjust terminal.

As shown in Figure 3, this voltage is applied across resistor R1 to generate a constant current I1. This constant

current then flows through R2. The resulting voltage drop across R2 adds to the reference voltage to sets the

desired output voltage.

The current IADJ from the adjustment terminal introduces an output error. But since it is small (120μA max), it

becomes negligible when R1 is in the 100Ωrange.

For fixed voltage devices, R1 and R2 are integrated inside the devices.

Figure 3. Basic Adjustable Regulator

Product Folder Links: LMS1585A LMS1587

PACKAGE OPTION ADDENDUM

www.ti.com 18-Jul-2013

Addendum-Page 1

PACKAGING INFORMATION

Orderable Device Status

(1)

Package Type Package

Drawing Pins Package

Qty Eco Plan

(2)

Lead/Ball Finish MSL Peak Temp

(3)

Op Temp (°C) Device Marking

(4/5)

Samples

LMS1585ACS-1.5 ACTIVE DDPAK/

TO-263 KTT 3 45 TBD Call TI Call TI 0 to 125 LMS1585

ACS-1.5

LMS1585ACS-1.5/NOPB ACTIVE DDPAK/

TO-263 KTT 3 45 Pb-Free (RoHS

Exempt) CU SN Level-3-245C-168 HR 0 to 125 LMS1585

ACS-1.5

LMS1585ACS-3.3 ACTIVE DDPAK/

TO-263 KTT 3 45 TBD Call TI Call TI 0 to 125 LMS1585

ACS-3.3

LMS1585ACS-3.3/NOPB ACTIVE DDPAK/

TO-263 KTT 3 45 Pb-Free (RoHS

Exempt) CU SN Level-3-245C-168 HR 0 to 125 LMS1585

ACS-3.3

LMS1585ACSX-1.5 ACTIVE DDPAK/

TO-263 KTT 3 500 TBD Call TI Call TI 0 to 125 LMS1585

ACS-1.5

LMS1585ACSX-1.5/NOPB ACTIVE DDPAK/

TO-263 KTT 3 500 Pb-Free (RoHS

Exempt) CU SN Level-3-245C-168 HR 0 to 125 LMS1585

ACS-1.5

LMS1585ACSX-3.3 ACTIVE DDPAK/

TO-263 KTT 3 500 TBD Call TI Call TI 0 to 125 LMS1585

ACS-3.3

LMS1585ACSX-3.3/NOPB ACTIVE DDPAK/

TO-263 KTT 3 500 Pb-Free (RoHS

Exempt) CU SN Level-3-245C-168 HR 0 to 125 LMS1585

ACS-3.3

LMS1585ACSX-ADJ ACTIVE DDPAK/

TO-263 KTT 3 500 TBD Call TI Call TI 0 to 125 LMS1585

ACS-ADJ

LMS1585ACSX-ADJ/NOPB ACTIVE DDPAK/

TO-263 KTT 3 500 Pb-Free (RoHS

Exempt) CU SN Level-3-245C-168 HR 0 to 125 LMS1585

ACS-ADJ

LMS1585ACT-1.5 ACTIVE TO-220 NDE 3 45 TBD Call TI Call TI 0 to 125 LMS1585ACT

1.5

LMS1585ACT-1.5/NOPB ACTIVE TO-220 NDE 3 45 Green (RoHS

& no Sb/Br) CU SN Level-1-NA-UNLIM 0 to 125 LMS1585ACT

1.5

LMS1585ACT-3.3 ACTIVE TO-220 NDE 3 45 TBD Call TI Call TI 0 to 125 LMS1585

ACT-3.3

LMS1585ACT-3.3/NOPB ACTIVE TO-220 NDE 3 45 Green (RoHS

& no Sb/Br) CU SN Level-1-NA-UNLIM 0 to 125 LMS1585

ACT-3.3

LMS1585AIS-1.5 ACTIVE DDPAK/

TO-263 KTT 3 45 TBD Call TI Call TI -40 to 125 LMS1585

AIS-1.5

LMS1585AIS-1.5/NOPB ACTIVE DDPAK/

TO-263 KTT 3 45 Pb-Free (RoHS

Exempt) CU SN Level-3-245C-168 HR -40 to 125 LMS1585

AIS-1.5

LMS1585AIS-3.3/NOPB ACTIVE DDPAK/

TO-263 KTT 3 45 Pb-Free (RoHS

Exempt) CU SN Level-3-245C-168 HR -40 to 125 LMS1585

AIS-3.3

PACKAGE OPTION ADDENDUM

www.ti.com 18-Jul-2013

Addendum-Page 2

Orderable Device Status

(1)

Package Type Package

Drawing Pins Package

Qty Eco Plan

(2)

Lead/Ball Finish MSL Peak Temp

(3)

Op Temp (°C) Device Marking

(4/5)

Samples

LMS1587CS-1.5 ACTIVE DDPAK/

TO-263 KTT 3 45 TBD Call TI Call TI 0 to 125 LMS1587

CS-1.5

LMS1587CS-1.5/NOPB ACTIVE DDPAK/

TO-263 KTT 3 45 Pb-Free (RoHS

Exempt) CU SN Level-3-245C-168 HR 0 to 125 LMS1587

CS-1.5

LMS1587CS-3.3 ACTIVE DDPAK/

TO-263 KTT 3 45 TBD Call TI Call TI 0 to 125 LMS1587

CS-3.3

LMS1587CS-3.3/NOPB ACTIVE DDPAK/

TO-263 KTT 3 45 Pb-Free (RoHS

Exempt) CU SN Level-3-245C-168 HR 0 to 125 LMS1587

CS-3.3

LMS1587CS-ADJ ACTIVE DDPAK/

TO-263 KTT 3 45 TBD Call TI Call TI 0 to 125 LMS1587

CS-ADJ

LMS1587CS-ADJ/NOPB ACTIVE DDPAK/

TO-263 KTT 3 45 Pb-Free (RoHS

Exempt) CU SN Level-3-245C-168 HR 0 to 125 LMS1587

CS-ADJ

LMS1587CSX-1.5 ACTIVE DDPAK/

TO-263 KTT 3 500 TBD Call TI Call TI 0 to 125 LMS1587

CS-1.5

LMS1587CSX-1.5/NOPB ACTIVE DDPAK/

TO-263 KTT 3 500 Pb-Free (RoHS

Exempt) CU SN Level-3-245C-168 HR 0 to 125 LMS1587

CS-1.5

LMS1587CSX-3.3 ACTIVE DDPAK/

TO-263 KTT 3 500 TBD Call TI Call TI 0 to 125 LMS1587

CS-3.3

LMS1587CSX-3.3/NOPB ACTIVE DDPAK/

TO-263 KTT 3 500 Pb-Free (RoHS

Exempt) CU SN Level-3-245C-168 HR 0 to 125 LMS1587

CS-3.3

LMS1587CSX-ADJ ACTIVE DDPAK/

TO-263 KTT 3 500 TBD Call TI Call TI 0 to 125 LMS1587

CS-ADJ

LMS1587CSX-ADJ/NOPB ACTIVE DDPAK/

TO-263 KTT 3 500 Pb-Free (RoHS

Exempt) CU SN Level-3-245C-168 HR 0 to 125 LMS1587

CS-ADJ

LMS1587CT-3.3 ACTIVE TO-220 NDE 3 45 TBD Call TI Call TI 0 to 125 LMS1587

CT-3.3

LMS1587CT-3.3/NOPB ACTIVE TO-220 NDE 3 45 Green (RoHS

& no Sb/Br) CU SN Level-1-NA-UNLIM 0 to 125 LMS1587

CT-3.3

LMS1587CT-ADJ ACTIVE TO-220 NDE 3 45 TBD Call TI Call TI 0 to 125 LMS1587

CT-ADJ

LMS1587CT-ADJ/NOPB ACTIVE TO-220 NDE 3 45 Green (RoHS

& no Sb/Br) CU SN Level-1-NA-UNLIM 0 to 125 LMS1587

CT-ADJ

LMS1587IS-1.5 ACTIVE DDPAK/

TO-263 KTT 3 45 TBD Call TI Call TI -40 to 125 LMS1587

IS-1.5

LMS1587IS-1.5/NOPB ACTIVE DDPAK/

TO-263 KTT 3 45 Pb-Free (RoHS

Exempt) CU SN Level-3-245C-168 HR -40 to 125 LMS1587

IS-1.5

PACKAGE OPTION ADDENDUM

www.ti.com 18-Jul-2013

Addendum-Page 3

Orderable Device Status

(1)

Package Type Package

Drawing Pins Package

Qty Eco Plan

(2)

Lead/Ball Finish MSL Peak Temp

(3)

Op Temp (°C) Device Marking

(4/5)

Samples

LMS1587IS-3.3 ACTIVE DDPAK/

TO-263 KTT 3 45 TBD Call TI Call TI -40 to 125 LMS1587

IS-3.3

LMS1587IS-3.3/NOPB ACTIVE DDPAK/

TO-263 KTT 3 45 Pb-Free (RoHS

Exempt) CU SN Level-3-245C-168 HR -40 to 125 LMS1587

IS-3.3

LMS1587IS-ADJ ACTIVE DDPAK/

TO-263 KTT 3 45 TBD Call TI Call TI -40 to 125 LMS1587

IS-ADJ

LMS1587IS-ADJ/NOPB ACTIVE DDPAK/

TO-263 KTT 3 45 Pb-Free (RoHS

Exempt) CU SN Level-3-245C-168 HR -40 to 125 LMS1587

IS-ADJ

LMS1587ISX-3.3 ACTIVE DDPAK/

TO-263 KTT 3 500 TBD Call TI Call TI -40 to 125 LMS1587

IS-3.3

LMS1587ISX-3.3/NOPB ACTIVE DDPAK/

TO-263 KTT 3 500 Pb-Free (RoHS

Exempt) CU SN Level-3-245C-168 HR -40 to 125 LMS1587

IS-3.3

LMS1587ISX-ADJ ACTIVE DDPAK/

TO-263 KTT 3 500 TBD Call TI Call TI -40 to 125 LMS1587

IS-ADJ

LMS1587ISX-ADJ/NOPB ACTIVE DDPAK/

TO-263 KTT 3 500 Pb-Free (RoHS

Exempt) CU SN Level-3-245C-168 HR -40 to 125 LMS1587

IS-ADJ

LMS1587IT-1.5 ACTIVE TO-220 NDE 3 45 TBD Call TI Call TI -40 to 125 LMS1587

IT-1.5

LMS1587IT-1.5/NOPB ACTIVE TO-220 NDE 3 45 Green (RoHS

& no Sb/Br) CU SN Level-1-NA-UNLIM -40 to 125 LMS1587

IT-1.5

(1) The marketing status values are defined as follows:

ACTIVE: Product device recommended for new designs.

LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.

NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.

PREVIEW: Device has been announced but is not in production. Samples may or may not be available.

OBSOLETE: TI has discontinued the production of the device.

(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability

information and additional product content details.

TBD: The Pb-Free/Green conversion plan has not been defined.

Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that

lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.

Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between

the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.

Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight

in homogeneous material)

PACKAGE OPTION ADDENDUM

www.ti.com 18-Jul-2013

Addendum-Page 4

(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.

(4) There may be additional marking, which relates to the logo, the lot trace code information, or the environmental category on the device.

(5) Multiple Device Markings will be inside parentheses. Only one Device Marking contained in parentheses and separated by a "~" will appear on a device. If a line is indented then it is a continuation

of the previous line and the two combined represent the entire Device Marking for that device.

Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information

provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and

continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.

TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.

In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.

TAPE AND REEL INFORMATION

*All dimensions are nominal

Device Package

Type Package

Drawing Pins SPQ Reel

Diameter

(mm)

Reel

Width

W1 (mm)

(mm) B0

(mm) K0

(mm) P1

(mm) W

(mm) Pin1

Quadrant

LMS1585ACSX-1.5 DDPAK/

TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2

LMS1585ACSX-1.5/NOPB DDPAK/

TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2

LMS1585ACSX-3.3 DDPAK/

TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2

LMS1585ACSX-3.3/NOPB DDPAK/

TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2

LMS1585ACSX-ADJ DDPAK/

TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2

LMS1585ACSX-ADJ/NOP

BDDPAK/

TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2

LMS1587CSX-1.5 DDPAK/

TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2

LMS1587CSX-1.5/NOPB DDPAK/

TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2

LMS1587CSX-3.3 DDPAK/

TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2

LMS1587CSX-3.3/NOPB DDPAK/

TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2

LMS1587CSX-ADJ DDPAK/ KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2

PACKAGE MATERIALS INFORMATION

www.ti.com 18-Jul-2013

Pack Materials-Page 1

Device Package

Type Package

Drawing Pins SPQ Reel

Diameter

(mm)

Reel

Width

W1 (mm)

(mm) B0

(mm) K0

(mm) P1

(mm) W

(mm) Pin1

Quadrant

TO-263

LMS1587CSX-ADJ/NOPB DDPAK/

TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2

LMS1587ISX-3.3 DDPAK/

TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2

LMS1587ISX-3.3/NOPB DDPAK/

TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2

LMS1587ISX-ADJ DDPAK/

TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2

LMS1587ISX-ADJ/NOPB DDPAK/

TO-263 KTT 3 500 330.0 24.4 10.75 14.85 5.0 16.0 24.0 Q2

*All dimensions are nominal

Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)

LMS1585ACSX-1.5 DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0

LMS1585ACSX-1.5/NOPB DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0

LMS1585ACSX-3.3 DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0

LMS1585ACSX-3.3/NOPB DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0

LMS1585ACSX-ADJ DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0

LMS1585ACSX-ADJ/NOP

BDDPAK/TO-263 KTT 3 500 367.0 367.0 45.0

LMS1587CSX-1.5 DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0

PACKAGE MATERIALS INFORMATION

www.ti.com 18-Jul-2013

Pack Materials-Page 2

Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)

LMS1587CSX-1.5/NOPB DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0

LMS1587CSX-3.3 DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0

LMS1587CSX-3.3/NOPB DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0

LMS1587CSX-ADJ DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0

LMS1587CSX-ADJ/NOPB DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0

LMS1587ISX-3.3 DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0

LMS1587ISX-3.3/NOPB DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0

LMS1587ISX-ADJ DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0

LMS1587ISX-ADJ/NOPB DDPAK/TO-263 KTT 3 500 367.0 367.0 45.0

PACKAGE MATERIALS INFORMATION

www.ti.com 18-Jul-2013

Pack Materials-Page 3

MECHANICAL DATA

NDE0003B

www.ti.com

MECHANICAL DATA

KTT0003B

www.ti.com

BOTTOM SIDE OF PACKAGE

TS3B (Rev F)

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other

changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest

issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and

complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale

supplied at the time of order acknowledgment.

TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms

and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary

to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily

performed.

TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and

applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide

adequate design and operating safeguards.

TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or

other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information

published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or

endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the

third party, or a license from TI under the patents or other intellectual property of TI.

Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration

and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered

documentation. Information of third parties may be subject to additional restrictions.

Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service

voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.

TI is not responsible or liable for any such statements.

Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements

concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support

that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which

anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause

harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use

of any TI components in safety-critical applications.

In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to

help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and

requirements. Nonetheless, such components are subject to these terms.

No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties

have executed a special agreement specifically governing such use.

Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in

military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components

which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and

regulatory requirements in connection with such use.

TI has specifically designated certain components as meeting ISO/TS16949 requirements, mainly for automotive use. In any case of use of

non-designated products, TI will not be responsible for any failure to meet ISO/TS16949.

Products Applications

Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive

Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications

Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers

DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps

DSP dsp.ti.com Energy and Lighting www.ti.com/energy

Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial

Interface interface.ti.com Medical www.ti.com/medical

Logic logic.ti.com Security www.ti.com/security

Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense

Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video

RFID www.ti-rfid.com

OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com

Wireless Connectivity www.ti.com/wirelessconnectivity

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265