ALUMINUM ELECTROLYTIC CAPACITORS VX Standard, For General Purposes - Axial Lead Type (02 type) series (Through 100V only) Axial lead type of standard series for general purposes. Compliant to the RoHS directive (2002/95/EC). Specifications Item Performance Characteristics Category Temperature Range - 40 to +85C (6.3 to 250V), - 25 to +85C (315 to 450V) Rated Voltage Range 6.3 to 450V Rated Capacitance Range 0.47 to 10000F Capacitance Tolerance 20% at 120Hz, 20C Rated voltage (V) 6.3 to 100 160 to 450 In case of CV 1000 After 1 minute's application of rated voltage, not more than 0.1CV+40 (A) . In case of CV > 1000 After 1 minute's application of rated voltage, not more than 0.04CV+100 (A) . After 1 minute's application of rated voltage, not more than 0.03CV or 4 (A) , whichever is greater. Leakage Current Leakage current After 2 minutes' application of rated voltage, not more than 0.01CV or 3 (A) , whichever is greater. Measurement frequency : 120Hz, Temperature : 20C Rated voltage (V) Tangent of loss angle (tan ) 6.3 0.24 tan (MAX.) 10 0.20 16 0.16 25 0.14 35 0.12 50 0.10 63 to 100 160 to 315 350 to 450 0.08 0.20 0.25 For capacitance of more than 1000F, add 0.02 for every increase of 1000F. Measurement frequency : 120Hz Rated voltage (V) Z- 25C / Z+20C Impedance rat io ZT / Z20 (MAX.) Z- 40C / Z+20C Stability at Low Temperature 6.3 4 10 10 3 8 16 2 6 25 2 4 35 to 100 160 to 250 315 * 350 400 * 450 2 4 6 15 3 12 -- -- Endurance The specifications listed at right shall be met when the capacitors are restored to 20C after the rated voltage is applied for 2000 hours at 85C. Capacitance change tan Leakage current Within 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Shelf Life After storing the capacitors under no load at 85C for 1000 hours and then performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20C, they shall meet the characteristic requirements at right. Capacitance change tan Leakage current Within 20% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Marking Printed with white color letter on purple blue sleeve. Type numbering system (Example : 10V 330F) Axial Lead Type 1 Pressure relief vent Sleeve (P.E.T.) Sealing rubber packing (10up) 2 3 4 5 6 7 8 9 10 11 T V X 1 A 3 3 1 MAD d +0.5MAX Configuration Capacitance tolerance ( 20%) D Rated capacitance (330F) Rated voltage (10V) L+ 35 MIN MAX 35 MIN Series name Type Configuration (mm) ( D < 10) 1 ( D 10) 2 D 5 to 13 d 0.6 16 to 18 0.8 D Pb-free leadwire Pb-free PET sleeve 5 to 8 AD 10 to 18 CD Please refer to page 22 about the taped product spec. Please refer to page 4 for the minimum order quantity. Dimension table in next page. CAT.8100Z ALUMINUM ELECTROLYTIC CAPACITORS VX (02 type) series Dimensions V Cap.(F) 6.3 0J Code 0.47 1 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 2200 3300 4700 6800 10000 R47 010 2R2 3R3 4R7 100 220 330 470 101 221 331 471 102 222 332 472 682 103 5 x 12 6.3 x 16 6.3 x 16 8 x 16 10 x 21 13 x 26 13 x 26 16 x 31.5 16 x 31.5 16 x 41.5 V Cap.(F) Code 1 2.2 3.3 4.7 10 22 33 47 100 010 2R2 3R3 4R7 100 220 330 470 101 10 1A 110 200 250 330 600 1020 1200 1500 1840 2260 6.3 x 12 6.3 x 16 8 x 16 8 x 16 10 x 21 13 x 26 13 x 31.5 16 x 31.5 16 x 41.5 18 x 41 160 2C 6.3 x 12 6.3 x 16 8 x 16 8 x 16 8 x 20 10 x 26 13 x 26 13 x 31.5 16 x 41.5 13 23 33 39 60 120 170 230 430 16 1C 25 1E 5 x 12 6.3 x 16 8 x 16 8 x 16 8 x 20 10 x 26 13 x 31.5 16 x 31.5 16 x 41.5 18 x 41 130 210 300 350 640 1090 1390 1730 1930 2350 200 2D 6.3 x 12 6.3 x 16 8 x 16 8 x 16 10 x 21 13 x 26 13 x 26 13 x 31.5 16 x 41.5 13 23 33 39 70 140 170 230 430 85 160 260 320 430 770 1180 1620 1840 2310 35 1V 5 x 12 80 6.3 x 12 100 6.3 x 16 170 8 x 16 280 8 x 20 380 10 x 26 510 13 x 26 900 16 x 31.5 1480 16 x 41.5 1710 18 x 41 2170 250 2E 6.3 x 16 8 x 16 8 x 16 8 x 20 10 x 21 13 x 26 13 x 31.5 16 x 31.5 16 x 41.5 14 27 33 45 70 140 190 260 430 5 x 12 70 6.3 x 12 90 120 6.3 x 16 210 8 x 16 8 x 20 340 10 x 21 460 10 x 26 610 13 x 31.5 1060 16 x 31.5 1580 16 x 41.5 2050 315 2F 6.3 x 16 8 x 16 8 x 20 8 x 20 10 x 26 13 x 31.5 16 x 31.5 16 x 31.5 14 27 36 45 80 150 210 260 50 1H 5 x 12 5 5 x 12 10 23 5 x 12 28 5 x 12 34 5 x 12 50 5 x 12 85 6.3 x 12 110 6.3 x 16 130 6.3 x 16 220 8 x 16 410 10 x 21 560 10 x 26 730 13 x 26 16 x 31.5 1260 18 x 41 1920 350 2V 6.3 x 16 8 x 16 8 x 20 10 x 21 13 x 26 13 x 31.5 16 x 31.5 16 x 41.5 12 24 32 46 85 140 190 260 63 1J 5 x 12 55 6.3 x 12 90 6.3 x 16 120 160 8 x 16 8 x 20 260 10 x 26 480 13 x 26 650 13 x 31.5 840 16 x 31.5 1330 400 2G 8 x 16 8 x 20 10 x 21 10 x 21 13 x 26 16 x 31.5 16 x 41.5 18 x 41 14 28 38 46 85 150 210 290 100 2A 5 x 12 5 x 12 5 x 12 5 x 12 5 x 12 6.3 x 12 8 x 16 8 x 16 8 x 20 10 x 26 13 x 26 13 x 31.5 16 x 31.5 450 2W 8 x 16 10 x 21 10 x 21 10 x 26 13 x 26 16 x 31.5 18 x 41 10 18 28 34 40 60 120 150 190 340 560 750 970 14 31 38 50 85 150 230 Case size Rated D x L (mm) ripple Rated ripple current (mArms) at 85C 120Hz Frequency coefficient of rated ripple current V Frequency Cap.(F) 0.47 to 47 6.3 to 100 100 to 470 1000 to 10000 160 to 450 1 to 100 120 Hz 300 Hz 1kHz 10kHz or more 1.00 1.35 1.57 2.00 1.00 1.23 1.34 1.50 1.00 1.10 1.13 1.15 1.00 1.25 1.40 1.60 CAT.8100Z