09/2008 26
GENERAL TECHNICAL DATA
Dielectric: polyester lm (polyethylene terephthalate).
Plates: aluminium layer deposited by evaporation under
vacuum.
Winding: non-inductive type.
Leads: tinned wire.
Protection: plastic case, thermosetting resin lled.
Box material is solvent resistant and ame
retardant according to UL94.
Marking: Capacitance, tolerance, D.C. rated voltage.
Climatic category: 55/105/56 IEC 60068-1
Operating temperature range: -55 to +105°C
Related documents: IEC 60384-2
PRODUCT CODE SYSTEM
The part number, comprising 14 digits, is formed as follows:
1 2 3 4 5 6 7 8 9 10 11 12 13 14
R 8 2 C -
Digit 1 to 3 Series code.
Digit 4 d.c. rated voltage:
C = 50V D = 63V E = 100V
I = 250V M = 400V
Digit 5 Pitch: C = 5 mm
Digit 6 to 9 Digits 7 - 8 - 9 indicate the rst three digits of
Capacitance value and the 6th digit indicates
the number of zeros that must be added to
obtain the Rated Capacitance in pF.
Digit 10 to 11 Mechanical version and/or packaging (table1)
Digit 12 Identies the dimensions and electrical
characteristics.
Digit 13 Internal use
Digit 14 Capacitance tolerance:
J=5%; K=10%; M=20%.
Table 1 (for more detailed information, please refer to page 14).
Standard
packaging style
Lead length Ordering code
(mm) (Digit 10 to 11)
AMMO-PACK DQ
Reel Ø 355 mm CK
Loose, short leads 4 +1.5 AA
Loose, long leads 17+1/-2 Z3
R82
MKT Series
METALLIZED POLYESTER FILM CAPACITOR
D.C. MULTIPURPOSE APPLICATIONS
Typical applications: by-passing, blocking, coupling,
decoupling, timing, oscillator circuits.
For inverter applications please refer to RSB Series.
PRODUCT CODE: R82 p = 5mm
single sided metallized
polyester lm
Winding scheme
B≤6 >6
Ød ±0.05 0.5 0.6 Pitch Box thickness (B) Maximum dimensions (mm)
(mm) (mm) B max H max L max
5.0 <4.5 B +0.1 H +0.1 L +0.2
5.0 4.5 B +0.1 H +0.1 L +0.3
Loose Taped
All dimensions are in mm.
Not for new design. Use new F611-F612 Series.
Digitally signed by Marcy Brand
DN: c=US, st=FL, l=Fort Lauderdale, o=KEMET Corporation, ou=Marketing Communications, cn=Marcy Brand, email=marcybrand@kemet.com
Date: 2012.07.18 12:09:19 -04'00'
09/2008
27
R82
MKT Series
METALLIZED POLYESTER FILM CAPACITOR
D.C. MULTIPURPOSE APPLICATIONS
p = 5 mm
PRODUCT CODE: R82
Note: If the working voltage (V) is lower than the rated
voltage (VR), the capacitor may work at higher dv/dt.
In this case the maximum value allowed is obtained
multiplying the above value (see table dv/dt) with the
ratio VR /V.
The pulse characteristic K0 depends on the voltage
wave-form and in any case it cannot overcome the
value given in the above table.
Rated
Cap.
250Vdc/160Vac
Std dimensions
Max
dv/dt
Max K0Part Number
B H L p (V/µs) (V2/µs)
6800 pF 2.5 6.5 7.2 5.0 250 125 E3R82IC 1680--5-
0.010 µF 2.5 6.5 7.2 5.0 250 125 E3 R82IC 2100--5--
0.015 µF 2.5 6.5 7.2 5.0 250 125 E3 R82IC 2150--5--
0.022 µF 3.5 7.5 7.2 5.0 250 125 E3R82IC 2220--5--
0.033 µF 3.5 7.5 7.2 5.0 250 125 E3 R82IC 2330--5--
0.047 µF 4.5 9.5 7.2 5.0 250 125 E3 R82IC 2470--5--
0.068 µF 4.5 9.5 7.2 5.0 250 125 E3 R82IC 2680--5--
0.10 µF 5.0 10.0 7.2 5.0 250 125 E3R82IC 3100--55-
0.15 µF 6.0 11.0 7.2 5.0 250 125 E3R82IC 3150--5--
a) STACKED version
b) WOUND version
Rated
Cap.
50Vdc/30Vac
Std dimensions
Max
dv/dt
Max K0Part Number
B H L p (V/µs) (V2/µs)
a) 2.2 µF 6.0 11.0 7.2 5.0 100 10.0 E3R82CC 4220--7--
b) 3.3 µF 7.2 13.0 7.2 5.0 25 2.5 E3 R82CC 4330--3--
b) 4.7 µF 7.2 13.0 7.2 5.0 25 2.5 E3 R82CC 4470--3--
Rated
Cap.
63Vdc/40Vac
Std dimensions
Max
dv/dt
Max K0Part Number
B H L p (V/µs) (V2µs)
0.10 µF 2.5 6.5 7.2 5.0 160 20 E3R82DC 3100--5--
0.15 µF 2.5 6.5 7.2 5.0 160 20 E3 R82DC 3150--6--
0.22 µF 2.5 6.5 7.2 5.0 160 20 E3 R82DC 3220--6--
0.33 µF 3.5 7.5 7.2 5.0 160 20 E3 R82DC 3330--6--
0.47 µF 3.5 7.5 7.2 5.0 160 20 E3 R82DC 3470--6--
0.68 µF 4.5 9.5 7.2 5.0 160 20 E3R82DC 3680--6--
1.0 µF 5.0 10.0 7.2 5.0 160 20 E3 R82DC 4100--6--
1.5 µF 6.0 11.0 7.2 5.0 160 20 E3 R82DC 4150--6--
Rated
Cap.
100Vdc/63Vac
Std dimensions
Max
dv/dt
Max K0Part Number
B H L p (V/µs) (V2/µs)
1000 pF 2.5 6.5 7.2 5.0 200 40 E3R82EC 1100--5--
1500 pF 2.5 6.5 7.2 5.0 200 40 E3 R82EC 1150--5--
2200 pF 2.5 6.5 7.2 5.0 200 40 E3 R82EC 1220--5--
3300 pF 2.5 6.5 7.2 5.0 200 40 E3 R82EC 1330--5--
4700 pF 2.5 6.5 7.2 5.0 200 40 E3 R82EC 1470--5--
6800 pF 2.5 6.5 7.2 5.0 200 40 E3 R82EC 1680--5--
0.010 µF 2.5 6.5 7.2 5.0 200 40 E3 R82EC 2100--5--
0.015 µF 2.5 6.5 7.2 5.0 200 40 E3 R82EC 2150--5--
0.022 µF 2.5 6.5 7.2 5.0 200 40 E3 R82EC 2220--5--
0.033 µF 2.5 6.5 7.2 5.0 200 40 E3R82EC 2330--5--
0.047 µF 2.5 6.5 7.2 5.0 200 40 E3R82EC 2470--6--
0.068 µF 2.5 6.5 7.2 5.0 200 40 E3 R82EC 2680--6--
0.10 µF 2.5 6.5 7.2 5.0 200 40 E3 R82EC 3100--7--
0.15 µF 3.5 7.5 7.2 5.0 200 40 E3 R82EC 3150--7--
0.22 µF 3.5 7.5 7.2 5.0 200 40 E3 R82EC 3220--7--
0.33 µF 4.5 9.5 7.2 5.0 200 40 E3R82EC 3330--7--
0.47 µF 4.5 9.5 7.2 5.0 200 40 E3 R82EC 3470--7--
0.68 µF 5.0 10.0 7.2 5.0 200 40 E3 R82EC 3680--7--
1.0 µF 6.0 11.0 7.2 5.0 200 40 E3 R82EC 4100--7--
STACKED version
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
Rated
Cap.
250Vdc/140Vac
REDUCED SIZES
Std dimensions
Max
dv/dt
Max K0Part Number
B H L p (V/µs) (V2/µs)
0.022 µF 2.5 6.5 7.2 5.0 130 65 E3 R82IC 2220--6--
0.047 µF 3.5 7.5 7.2 5.0 130 65 E3 R82IC 2470--6--
0.068 µF 3.5 7.5 7.2 5.0 130 65 E3 R82IC 2680--6--
0.10 µF 4.5 9.5 7.2 5.0 130 65 E3 R82IC 3100--6--
0.15 µF 5.0 10.0 7.2 5.0 130 65 E3 R82IC 3150--6--
0.22 µF 6.0 11.0 7.2 5.0 130 65 E3 R82IC 3220--6--
Mechanical version and packaging (Table1)
Internal use
Tolerance: J (±5%); K (±10%); M (±20%)
Rated
Cap.
400Vdc/160Vac
REDUCED SIZES
Std dimensions
Max
dv/dt
Max K0Part Number
B H L p (V/µs) (V2µs)
6800 pF 2.5 6.5 7.2 5.0 200 160 E3 R82MC1680--6--
0.015 µF 3.5 7.5 7.2 5.0 200 160 E3 R82MC2150--6--
0.033 µF 4.5 9.5 7.2 5.0 200 160 E3R82MC2330--6--
0.047 µF 5.0 10.0 7.2 5.0 200 160 E3 R82MC2470--6--
0.068 µF 6.0 11.0 7.2 5.0 200 160 E3 R82MC2680--6--
Rated
Cap.
400Vdc/200Vac
Std dimensions
Max
dv/dt
Max K0Part Number
B H L p (V/µs) (V2µs)
1000 pF 2.5 6.5 7.2 5.0 400 320 E3 R82MC1100--5--
1500 pF 2.5 6.5 7.2 5.0 400 320 E3R82MC1150--5--
2200 pF 2.5 6.5 7.2 5.0 400 320 E3 R82MC1220--5--
3300 pF 2.5 6.5 7.2 5.0 400 320 E3 R82MC1330--5--
4700 pF 2.5 6.5 7.2 5.0 400 320 E3 R82MC1470--5--
6800 pF 3.5 7.5 7.2 5.0 400 320 E3R82MC1680--5--
0.010 µF 3.5 7.5 7.2 5.0 400 320 E3R82MC2100--5--
0.015 µF 4.5 9.5 7.2 5.0 400 320 E3 R82MC2150--5--
0.022 µF 4.5 9.5 7.2 5.0 400 320 E3 R82MC2220--5--
0.033 µF 5.0 10.0 7.2 5.0 400 320 E3 R82MC2330--5--
0.047 µF 6.0 11.0 7.2 5.0 400 320 E3R82MC2470--5--
All dimensions are in mm.
Not for new design. Use new F611-F612 Series.
09/2008 28
R82
MKT Series
METALLIZED POLYESTER FILM CAPACITOR
D.C. MULTIPURPOSE APPLICATIONS
p = 5 mm
PRODUCT CODE: R82
ELECTRICAL CHARACTERISTICS
Rated voltage (VR):
50 Vdc 63 Vdc 100 Vdc
250 Vdc 400 Vdc
Rated temperature (TR): +85 °C
Temperature derated voltage:
for temperatures between +85°C and +105°C a decreasing
factor of 1.25% per degree °C on the rated voltage VR (d.c.
and a.c.) has to be applied.
Capacitance range: 1000pF to 4.7µF
Capacitance values: E6 series (IEC 60063 Norm).
Capacitance tolerances (measured at 1 kHz):
±5% (J); ±10% (K); ±20% (M).
Total self-inductance (L): ≈7nH
max 1 nH per 1 mm lead and capacitor length.
Dissipation factor (DF):
tgδ 10-4 at +25°C ±5°C
kHz C 0.1µF C > 0.1µF
1
10
100
80
120
250
80
120
Insulation resistance:
Test conditions
Temperature: +25°C±5°C
Voltage charge time: 1 min
Voltage charge:
50 Vdc for VR <100 Vdc
100 Vdc for VR ≥100 Vdc
Performance
For VR ≤100 Vdc
15000 MΩ for C ≤ 0.33µF
5000 s for C > 0.33µF and ≤1µF
1000 s for C > 1µF
For VR >100 Vdc
30000 MΩ
*Typical value
Test voltage between terminations:
1.4xVR applied for 2 s at +25°C±5°C.
TEST METHOD AND PERFORMANCE
Damp heat, steady state:
Test conditions
Temperature: +40°C±2°C
Relative humidity (RH): 93% ±2%
Test duration: 56 days
Performance
Capacitance change |∆C/C|: ≤ 5%
DF change (∆tgδ): ≤ 50x10-4 at 1kHz
Insulation resistance: ≥ 50% of initial limit.
Endurance:
Test conditions
Temperature: +105°C ±2°C
Test duration: 2000 h
Voltage applied: 1.25xVC
Performance
Capacitance change |∆C/C|: ≤ 5%
DF change (∆tgδ): ≤ 30x10-4 at 10kHz for C≤1µF
≤ 20x10-4 at 1kHz for C>1µF
Insulation resistance: ≥50% of initial limit.
Resistance to soldering heat:
Test conditions
Solder bath temperature: +260°C±5°C
Dipping time (with heat screen):10 s ±1 s
Performance
Capacitance change |∆C/C|: ≤2%
DF change (∆tgδ): ≤ 30x10-4 at 10kHz for C≤ 1µF
≤ 20x10-4 at 1kHz for C> 1µF
Insulation resistance: ≥ initial limit.
Long term stability (after two years):
Storage: standard environmental conditions (see page 12).
Performance
Capacitance change |∆C/C|: ≤ 3% for C≤ 0.1µF
≤ 2% for C> 0.1µF
RELIABILITY:
Reference MIL HDB 217
Application conditions:
Temperature: +40°C±2°C
Voltage: 0.5xVR
Failure rate: ≤ 1 FIT
(1 FIT = 1x10-9 failures/components x h)
Failure criteria:
(according to DIN 44122)
Short or open circuit
Capacitance change |∆C/C|: > 10%
DF change (∆tgδ): > 2 x initial limit.
Insulation resistance: < 0.005 x initial limit.
Not for new design. Use new F611-F612 Series.
09/2008
29
R82
MKT Series
METALLIZED POLYESTER FILM CAPACITOR
D.C. MULTIPURPOSE APPLICATIONS
p = 5 mm
PRODUCT CODE: R82
MAX. VOLTAGE (Vr.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th 40°C)
Not for new design. Use new F611-F612 Series.
R82
MKT Series
METALLIZED POLYESTER FILM CAPACITOR
D.C. MULTIPURPOSE APPLICATIONS
p = 5 mm
PRODUCT CODE: R82
MAX. CURRENT (Ir.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th 40°C)
1
Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute
and we specifically disclaim any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise
provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.
Not for new design. Use new F611-F612 Series.