Xiamen Hualian Electronics Co. , Ltd. SPECIFICATION DESCRIPTION: RED ULTRA BRIGHT LED MODELHFR805011C-15 HFR805021C-23 HFR805021C-30 05926037469 05926037471 E-mail xmhlec@public.xm.fj.cn Website : www.xmhl.com 361006 PDF "FinePrint pdfFactory Pro" www.fineprint.com.cn RED ULTRA BRIGHT LED SPECIFICATION HFR805011C-15 HFR805021C-23 HFR805021C-30 1FEATURES: Low Drive Current, High Intensity of Light Emission. Fast Response Time , Pulse Driven. Water Clear Plastic Molding. 2ABSOLUTE MAXIMUM RATINGS(Ta=25): PARAMETER (1) SYMBOL RATING UNIT IFPM 100 mA IFM 50 mA VR 5 V PD 150 mW Topr -25+85 Tstg -40+100 Tsol 260 Forward Pulse Current Forward Current Reverse Voltage Power Dissipation Operating Temperature Storage Temperature 5 (2) Soldering Heat (5s) (1) Duty1/10 Frequency1KHz (2) 2 mm Up to 2 mm from the body. 3OPTOELECTRIC CHARACTERISTICS(Ta=25): PARAMETER SYMBOL TEST CONDITION MIN TYP MAX UNIT VF IF=20mA 1.9 2.5 V IR VR=5V 10 A HFR805011C-15 1200 2500 IF=20mA HFR805021C-23 1000 2000 HFR805021C-30 700 1400 Forward Voltage Reverse Current Luminous Intensity Peak Wave Length Dominate Wave Length Spectral Line Half Width 2002 5 IV mcd P IF=20mA 635 nm D IF=20mA 626 nm IF=20mA 20 nm 2 7 PDF "FinePrint pdfFactory Pro" www.fineprint.com.cn RED ULTRA BRIGHT LED SPECIFICATION HFR805011C-15 HFR805021C-23 HFR805021C-30 4DIMENSION 1. Anode 2. Cathode Model HFR805011C-15 HFR805021C-23 HFR805021C-30 2002 5 X 12.70.5 12.20.5 12.00.5 3 7 PDF "FinePrint pdfFactory Pro" www.fineprint.com.cn RED ULTRA BRIGHT LED SPECIFICATION HFR805011C-15 HFR805021C-23 HFR805021C-30 5. Characteristics Curve Ta=25C 100 Forward currentI F(mA) Relative Luminous Intensity I V FORWARD CURRENT VS. FORWARD VOLTAGE RELATIVE LUMINOUS INTENSITY VS.FORWARD CURRENT -- -- 80 60 40 20 0 1.2 1.6 2.0 2.4 2.8 3.0 Ta=25C 2000 1600 1200 800 400 0 0 Forward voltageV F (V) 100 80 60 40 20 0 20 40 60 80 100 Ambient Temperature Ta( C) Rel ative Luminous Intensity I V 80 100 2 1 0.5 0.2 0.1 0 -30 -10 10 30 50 70 RADIATION PATTERN Ta=25C IF=20mA Ta=25 0.8 60 90 Ambient Temperature Ta( C) RELATIVE INTENSITY VS. WAVELENGTH -- 1.0 40 RELATIVE INTENSITY VS. AMBIENT TEMPERATURE -- Relative Luminous Intensity I V Allowable forward currentI F(mA) FORWARD CURRENT VS. AMBIENT TEMPERATURE -- 0 20 Forward Current(mA) HFR805011C-15 0 30 HFR805021C-23 30 0.6 HFR805021C-30 60 0.4 60 0.2 0 580 600 620 640 660 Wavelength(nm) 2002 5 700 90 1.0 0.5 0 90 0.5 1.0 Relative Intensity 4 7 PDF "FinePrint pdfFactory Pro" www.fineprint.com.cn RED ULTRA BRIGHT LED SPECIFICATION HFR805011C-15 HFR805021C-23 HFR805021C-30 Packing 6 6.1 220x110mm2 1000 / Internally packed with 220x110mm2 plastic bag anti-statically, 1000pcs/bag. 6 110 220 40 40 CAUTION TO ELECTROSTATIC DAMAGE XIAMEN HUALIAN ELECTRONICS C O.LTD. MA DE IN CHINA 6.2 (220x220x190mm)3 10000 / Externally Packed with 220x220x190mm3 cartons, 10000 pcs/carton. 6.3 Label Xiamen Hualian Electronics Co.., Ltd. P/N: Lot No. Qty. Insp. 7 Precautions 7.1 Forming 1Leads should be formed before soldering. 2002 5 5 7 PDF "FinePrint pdfFactory Pro" www.fineprint.com.cn RED ULTRA BRIGHT LED SPECIFICATION HFR805011C-15 HFR805021C-23 HFR805021C-30 2Do not form the leads with their bases as a fulcrum. 3 5mm Forming location should be up to 5mm from the epoxy body. 7.2 Installation LED PCB Installation on PCB do not apply physical stress to the leads when mounting LED lamps on PCB. Correct Wrong 7.3 Soldering 1Do not dip epoxy body into solder bath. 2Do not apply stress to the leads while they are heated. 3 30W 3 When soldering LED, the solder iron power should be not more than 30W and with the soldering time not more than 3 seconds. 9.4 Cleaning 1 1 In any case, the cleaning time should be 1 minute or less at a normal temperature. 2 Do not clean LEDs with water as the remains may rust the leads. Alcohol is suggested to be used. 3 LED 300W 30 PCB LED PCB LED When LEDs are ultrasonic-washed, use the ultrasonic output power of less than 300W and the time of less than 30s; do not let the PCB and LEDs touch on the oscillator; do not resonate the LEDs attached on the PCB. 7.5 LED LED 2002 5 6 7 PDF "FinePrint pdfFactory Pro" www.fineprint.com.cn RED ULTRA BRIGHT LED SPECIFICATION HFR805011C-15 HFR805021C-23 HFR805021C-30 The ultra bright LED is an electrostatic insensitive device, so static electricity and surge will damage the LED. It is required to wear a wrist-band when handling the LED. All device, equipment, machinery, desk and ground must be properly grounded. 8 Suggested way of usage. LED 20mA When using LED, it must use a protective resistor in series with DC current about 20 mA. 2002 5 7 7 PDF "FinePrint pdfFactory Pro" www.fineprint.com.cn