Data Sheet
August 24, 2010
QRW010/025/035/040 Series Power Modules; dc-dc Converters
36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40 A
* ISO is a registered trademark of the International Organization of Standards
** UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
§ This product is intended for integration into end-use equipment. All of the required procedures of end-use equipment
should be followed.
Document Name: DS03-113 ver.4.4
PDF name: QRW035_Series.pd
f
Features
Compliant to RoHS EU Dire ctive 2002/95/EC (-Z
versions)
Compliant to ROHS EU Directive 2002/95/EC with
lead solder exemption (non-Z versions)
Delivers up to 40A outpu t cur r ent
Ultra High efficiency – 91% at 3.3V full load
Industry standard DOSA Compliant Quarter brick:
57.9 mm x 36.8 mm x 9.5 mm
(2.28 in x 1. 45 in x 0.375 in)
Improved Thermal Performance:
23A at 70º C at 1m/s (200LFM) for 3.3Vo
High power density: 100W /in3
Low output rippl e an d noi se
Low output voltages down to 1V: Supports migration
to future IC and microprocessor supply voltages
2:1 input voltage
Remote Sense
Remote On/Off
Constant switching frequency
Output overvoltage and Overcurrent protection
Overtemperature prot ection
Adjustabl e output volt age (+ 10 % / -20%)
Meets the voltage isolation requ irements f or
ETSI 300-132-2 and complies with and is licensed
for Basic I nsulation rating per EN60950-1
UL** 60950-1 Recognised, CSA† C22.2 No. 60950-
1-03 Certifi e d, an d VDE‡ 0805 (IEC60950, 3rd
Edition) Licens ed
CE mark meets 2006/95/EC directive§
ISO* 9001 certified manufacturing facilities
Applications
Enterprise Networks
Wireless Networks
Access and Optical Network Equipm ent
Enterprise Networks
Latest generation IC’s (DSP, FPGA, ASIC) and
Microprocessor-powered applications.
Options
Positive Remote On/Off logic
Case ground pin (-H Base plate version)
Auto restart after fault shutdown
Description
The QRW-series dc-dc converters are a new generation of DC/DC power modules designed for optimum efficiency
and power density. The QRW series provide up to 40A output current in an industry standard quarter brick, which
makes it an ideal choice for small space, high current and low voltage ap plications. The converter uses synchr onous
rectifi cation technology and innovative packaging techniques to achieve ultra high efficiency reaching 91% at 3.3V
full load. Thanks to the ultra high efficiency of this converter, the power dissipation is such that for most appl ications
a heat sink is not required. In addition, the QRW-series supports future migration of semiconductor and
microprocessor supply voltag es do wn to 1.0 V.
RoHS Compliant
Lineage Power 2
Data Sheet
August 24, 2010 36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40 A
QRW010/025/035/040 Series Power Modules; dc-dc Converters
Absolute Maximum Ratings
Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. These are absolute stress
ratings only, functional operation of the device is not implied at these or any other conditions in excess of those given in the
operations sections of the data sheet. Exposure to absolute maximum ratings for extended periods can adversely affect the
device reliabiltiy.
Electrical Specifications
Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions.
CAUTION: This power module is not internally fused. An input line fuse must always be used.
This power module can be used in a wide variety of applications, ranging from simple stand-alone operation to an integrated
part of a sophisticated power architecture. To preserve maximum flexibility, internal fusing is not included; however, to achieve
maximum safety and system protection, always use an input line fuse. The safety agencies require a normal-blow fuse with a
maximum rating of 10 A (see Safety Considerations section). Based on the information provided in this data sheet on inrush
energy and maximum dc input current, the same type of fuse with a lower rating can be used. Refer to the fuse manufacturer’s
data for further information.
Parameter Device Symbol Min Max Unit
Input Voltage:Continuous
Transient (100ms)
All VI
VI, trans
—
—
80
100
Vdc
Vdc
Operating Ambient Temperature
(See Thermal Considerations section)
All TA –40 85 °C
Storage Temperature All Tstg –55 125 °C
I/O Isolation Voltage (100% factory Hi-Pot tested)
When using optional case ground pin
(option 7)
— — 1500
700
Vdc
Vdc
Parameter Device Symbol Min Typ Max Unit
Operating Input Voltage All VIN 36 48 75 Vdc
Maximum Input Current
(VI = 0 V to 75 V; IO = IO, max)
All — — 4.5 Adc
Inrush Transient All I2t1A
2s
Input Reflected Ripple Current, peak-peak
(5 Hz to 20 MHz, 12 µH source impedance
See Test configuration section)
All 16 mAp-p
Input Ripple Rejection (120 Hz) All 60 dB
Lineage Power 3
Data Sheet
August 24, 2010 36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40 A
QRW010/025/035/040 Series Power Modules; dc-dc Converters
Electrical Specifications (continued)
Output Specifications for the QRW040A0S1R0 (Vo = 1.0Vdc)
Isolation Specifications
General Specifications
Parameter Device Symbol Min Typ Max Unit
Output Voltage Set Point
(VI = 48 Vdc; IO = IO, min to IO, max, TA = 25 °C)
P Vo 0.99 1.0 1.01 Vdc
Output Voltage
(Over all operating input voltage, resistive load, and
temperature conditions at steady state until end of life.)
P Vo 0.98 — 1.02 Vdc
Output Regulation:
Line (VI = VI, min to VI, max)
Load (IO = IO, min to IO, max)
Temperature (TA = TA, min to TA, max)
P—
—
—
—
—
—
0.1
0.1
15
0.3
0.3
50
%, VO, set
%, VO, set
mV
Output Ripple and Noise
RMS (5 Hz to 20 MHz bandwidth)
Peak-to-peak (5 Hz to 20 MHz bandwidth)
P—
—
—
—
30
80
mVrms
mVp-p
External Load Capacitance — 25,000 µF
Output Current
(Vo =90% of VO, nom.)
PIO0.0—40Adc
Output Current-limit Inception
(VO = 90% of VO, set)
P IO, lim — 49 — Adc
Output Short-circuit Current (Average)VO = 0.25 V Latched off
Efficiency
(VI = VIN, nom; IO = IO, max), TA = 25 °C
η—83— %
Switching Frequency All fSW — 300 — kHz
Dynamic Response
(DIO/Dt = 1 A/10 µs, VI = 48 V, TA = 25 °C); tested
with a 220 µF aluminium and a 1.0 µf ceramic
capacitor across the load.):
Load Change from
IO = 50% to 75% of IO, max:
Peak Deviation
Settling Time
(VO < 10% of peak deviation)
Load Change from IO = 50% to 25%
of IO, max :
Peak Deviation
Settling Time
(VO < 10% of peak deviation)
160
200
180
200
mV
µs
mV
µs
Parameter Symbol Min Typ Max Unit
Isolation Capacitance Ciso — 5600 — PF
Isolation Resistance Riso 10 — — MΩ
Parameter Min Typ Max Unit
Calculated MTBF (Io = 80% of Io, max Ta = 40 °C TBD Hours
Weight — 37(1.31) — g (oz.)
Lineage Power 4
Data Sheet
August 24, 2010 36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40 A
QRW010/025/035/040 Series Power Modules; dc-dc Converters
Feature Specifications
Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions.
See Feature Descriptions for additional information.
Parameter Symbol Min Typ Max Unit
Remote On/Off Signal Interface*
(VI = 0 V to 75 V; open collector or equivalent compatible; signal
referenced to VI(–) terminal; see Figure 52
and Feature Descriptions.):
Preferred Logic:
Logic Low—Module On
Logic High—Module Off
Optional Logic:
Logic Low—Module Off
Logic High—Module On
Logic Low:
At Ion/off = 1.0 mA
At Von/off = 0.0 V
Logic High:
At Ion/off = 0.0 µA
Leakage Current
Turn-on Time; see Typical Start-up Curve(IO = IO max;
Vo within ±1% of steady state)
Von/off
Ion/off
Von/off
Ion/off
0
—
—
—
—
—
—
—
2
1.2
1.0
15
50
4
V
mA
V
µA
ms
Output Voltage Adjustment
(See Feature Descriptions):
Output Voltage Remote-sense Range
Output Voltage Set-point Adjustment Range (trim)
—
—
—
80
—
—
10
110
%VO,rated
%V0,nom
Output Overvoltage Protection VO, ovsd 1.25 — 1.5 V
Overtemperature Protection (IO = IO, max) Tref1 — 127 — °C
Lineage Power 5
Data Sheet
August 24, 2010 36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40 A
QRW010/025/035/040 Series Power Modules; dc-dc Converters
Characteristic Curves
The following figures provide typical characteristics curves for the QRW040A0S1R0 (VO = 1.0 V) module at room temperature
(TA = 25 °C).The figures are identical for both on/off configurations.
Figure 1. Input Voltage and Current Characteristics.
Figure 2. Converter Efficiency vs. Output Current.
Figure 3. Output Ripple Voltage (IO = IO, max).
Tested with a 220µF aluminium and a 1.0µF ceramic
capacitor across the load.
Figure 4. Transient Response to Step decrease in
Load from 50% to 25% of Full Load (VI = 48
Vdc).
Figure 5. Transient Response to Step Increase in Load
from 50% to 75% of Full Load (VI = 48 Vdc).
Figure 6. Start-up from Remote On/Off (IO = IO, max).
70
72
74
76
78
80
82
84
86
88
0 5 10 15 20 25 30 35 40
OUTPUT VOLTAGE, Vo (V)
(50 mV/div)
TIME, t (1.00 µs/div)
TIME, t (0.1ms/div)
OUTPUT VOLTAGE, Io (A)
(10A/div)
OUTPUT CURRENT,
(100 mv/div)
Vo ( V
TIME, t (0.1ms/div)
OUTPUT VOLTAGE, Io (A)
(10A/div)
OUTPUT CURRENT,
(100 mv/div)
Vo ( V)
TIME, t (2ms/div)
REMOTE ON/OFF
V on/off (V)
OUTPUT VOLTAGE
(0.5 V/div)
(V)
Lineage Power 6
Data Sheet
August 24, 2010 36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40 A
QRW010/025/035/040 Series Power Modules; dc-dc Converters
Electrical Specifications (continued)
Output Specifications for the QRW040AP (Vo = 1.2Vdc)
Isolation Specifications
General Specifications
Parameter Device Symbol Min Typ Max Unit
Output Voltage Set Point
(VI = 48 Vdc; IO = IO, min to IO, max, TA = 25 °C)
P Vo 1.18 1.2 1.22 Vdc
Output Voltage
(Over all operating input voltage, resistive load, and
temperature conditions at steady state until end of life.)
P Vo 1.16 — 1.24 Vdc
Output Regulation:
Line (VI = VI, min to VI, max)
Load (IO = IO, min to IO, max)
Temperature (TA = TA, min to TA, max)
P—
—
—
—
—
—
0.05
0.05
15
0.3
0.3
50
%, VO, set
%, VO, set
mV
Output Ripple and Noise
RMS (5 Hz to 20 MHz bandwidth)
Peak-to-peak (5 Hz to 20 MHz bandwidth)
P—
—
—
—
30
80
mVrms
mVp-p
External Load Capacitance — 25,000 µF
Output Current
(Vo =90% of VO, nom.)
PIO0.0—40Adc
Output Current-limit Inception
(VO = 90% of VO, set)
P IO, lim — 45 — Adc
Output Short-circuit Current (Average)VO = 0.25 V Latched off
Efficiency
(VI = VIN, nom; IO = IO, max), TA = 25 °C
η—85— %
Switching Frequency All fSW — 300 — kHz
Dynamic Response
(DIO/Dt = 1 A/10 µs, VI = 48 V, TA = 25 °C); tested
with a 220 µF aluminium and a 1.0 µf ceramic
capacitor across the load.):
Load Change from
IO = 50% to 75% of IO, max:
Peak Deviation
Settling Time
(VO < 10% of peak deviation)
Load Change from IO = 50% to 25%
of IO, max :
Peak Deviation
Settling Time
(VO < 10% of peak deviation)
120
200
120
200
mV
µs
mV
µs
Parameter Symbol Min Typ Max Unit
Isolation Capacitance Ciso — 5600 — PF
Isolation Resistance Riso 10 — — MΩ
Parameter Min Typ Max Unit
Calculated MTBF (Io = 80% of Io, max Ta = 40 °C), Issue 1, M1, C1 1,271,000 Hours
Weight — 37(1.31) — g (oz.)
Lineage Power 7
Data Sheet
August 24, 2010 36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40 A
QRW010/025/035/040 Series Power Modules; dc-dc Converters
Feature Specifications
Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions.
See Feature Descriptions for additional information.
* A Minimum OFF Period of 1 sec is recommended.
Parameter Symbol Min Typ Max Unit
Remote On/Off Signal Interface*
(VI = 0 V to 75 V; open collector or equivalent compatible; signal
referenced to VI(–) terminal; see Figure 52
and Feature Descriptions.):
Preferred Logic:
Logic Low—Module On
Logic High—Module Off
Optional Logic:
Logic Low—Module Off
Logic High—Module On
Logic Low:
At Ion/off = 1.0 mA
At Von/off = 0.0 V
Logic High:
At Ion/off = 0.0 µA
Leakage Current
Turn-on Time; see Typical Start-up Curve(IO = IO max;
Vo within ±1% of steady state)
Von/off
Ion/off
Von/off
Ion/off
0
—
—
—
—
—
—
—
2
1.2
1.0
15
50
4
V
mA
V
µA
ms
Output Voltage Adjustment
(See Feature Descriptions):
Output Voltage Remote-sense Range
Output Voltage Set-point Adjustment Range (trim)
—
—
—
80
—
—
10
110
%VO,rated
%V0,nom
Output Overvoltage Protection VO, ovsd 1.42 — 1.58 V
Overtemperature Protection (IO = IO, max) Tref1 — 127 — °C
Lineage Power 8
Data Sheet
August 24, 2010 36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40 A
QRW010/025/035/040 Series Power Modules; dc-dc Converters
Characteristic Curves
The following figures provide typical characteristics curves for the QRW040A0P (VO = 1.2 V) module at room temperature (TA
= 25 °C)
Figure 7. Input Voltage and Current Characteristics.
Figure 8. Converter Efficiency vs. Output Current.
Figure 9. Output Ripple Voltage (IO = IO, max).
Tested with a 220µF aluminium and a 1.0µF ceramic
capacitor across the load.
Figure 10. Transient Response to Step Decrease in
Load from 50% to 25% of Full Load
(VI = 48 Vdc).
Figure 11. Transient Response to Step Increase in
Load from 50% to 75% of Full Load
(VI = 48 Vdc).
Tested with a 10µF aluminium and a 1.0µF tantalum capacitor
across the load.
Figure 12. Start-up from Remote On/Off (IO = IO, max).
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
2
0 1020304050607080
INPUT CURRENT, I
I
(A)
I
O
= 40 A
I
O
= 20 A
I
O
= 4 A
70
72
74
76
78
80
82
84
86
88
0 4 8 1216202428323640
OUTPUT CURRENT, I
O
(A)
EFFICIENCY,
η
(%)
V
I
= 36 V
V
I
= 48 V
V
I
= 75 V
TIME t, (1µs/div)
36V, 40A
48V, 40A
75V, 40A
OUTPUT VOLTAGE, VO (V)
(50 mV/div)
TIME, t (.1 ms/div)
OUTPUT CURRE NT, I (A)
O
(10 A/div)
OUTPUT VOLTAGE, V (V)
O
(100 mV/div)
Lineage Power 9
Data Sheet
August 24, 2010 36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40 A
QRW010/025/035/040 Series Power Modules; dc-dc Converters
Electrical Specifications (continued)
Output Specifications for the QRW040AOM (Vo = 1.5Vdc)
Isolation Specifications
General Specifications
Parameter Device Symbol Min Typ Max Unit
Output Voltage Set Point
(VI = 48 Vdc; IO = IO, min to IO, max, TA = 25 °C)
MVo1.471.51.52Vdc
Output Voltage
(Over all operating input voltage, resistive load, and
temperature conditions at steady state until end of life.)
MVo1.45—1.55Vdc
Output Regulation:
Line (VI = VI, min to VI, max)
Load (IO = IO, min to IO, max)
Temperature (TA = TA, min to TA, max)
M—
—
—
—
—
—
0.05
0.05
15
0.2
0.2
50
%, VO, set
%, VO, set
mV
Output Ripple and Noise
RMS (5 Hz to 20 MHz bandwidth)
Peak-to-peak (5 Hz to 20 MHz bandwidth)
M—
—
—
—
20
100
mVrms
mVp-p
External Load Capacitance — 25,000 µF
Output Current
(Vo =90% of VO, nom.)
MIO0.0—40Adc
Output Current-limit Inception
(VO = 90% of VO, set)
M IO, lim — 47 — Adc
Output Short-circuit Current (Average)VO = 0.25 V Latched off
Efficiency
(VI = VIN, nom; IO = IO, max), TA = 25 °C
η—86.5— %
Switching Frequency All fSW — 300 — kHz
Dynamic Response
(DIO/Dt = 1 A/10 µs, VI = 48 V, TA = 25 °C); tested
with a 220 µF aluminium and a 1.0 µf ceramic
capacitor across the load.):
Load Change from
IO = 50% to 75% of IO, max:
Peak Deviation
Settling Time
(VO < 10% of peak deviation)
Load Change from IO = 50% to 25%
of IO, max :
Peak Deviation
Settling Time
(VO < 10% of peak deviation)
120
200
120
200
mV
µs
mV
µs
Parameter Symbol Min Typ Max Unit
Isolation Capacitance Ciso — 5600 — PF
Isolation Resistance Riso 10 — — MΩ
Parameter Min Typ Max Unit
Calculated MTBF (Io = 80% of Io, max Ta = 40 °C), Issue 1, M1, C1 1,548,000 Hours
Weight — 38(1.54) — g (oz.)
Lineage Power 10
Data Sheet
August 24, 2010 36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40 A
QRW010/025/035/040 Series Power Modules; dc-dc Converters
Feature Specifications
Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions.
See Feature Descriptions for additional information.
* A Minimum OFF Period of 1 sec is recommended.
Parameter Symbol Min Typ Max Unit
Remote On/Off Signal Interface*
(VI = 0 V to 75 V; open collector or equivalent compatible; signal
referenced to VI(–) terminal; see Figure 52
and Feature Descriptions.):
Preferred Logic:
Logic Low—Module On
Logic High—Module Off
Optional Logic:
Logic Low—Module Off
Logic High—Module On
Logic Low:
At Ion/off = 1.0 mA
At Von/off = 0.0 V
Logic High:
At Ion/off = 0.0 µA
Leakage Current
Turn-on Time; see Typical Start-up Curve(IO = IO max;
Vo within ±1% of steady state)
Von/off
Ion/off
Von/off
Ion/off
0
—
—
—
—
—
—
—
2
1.2
1.0
15
50
4
V
mA
V
µA
ms
Output Voltage Adjustment
(See Feature Descriptions):
Output Voltage Remote-sense Range
Output Voltage Set-point Adjustment Range (trim)
—
—
—
80
—
—
10
110
%VO,rated
%V0,nom
Output Overvoltage Protection VO, ovsd 1.69 — 2.07 V
Overtemperature Protection (IO = IO, max) Tref1 — 127 — °C
Lineage Power 11
Data Sheet
June 2, 200936 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40 A
QRW010/025/035/040 Series Power Modules; dc-dc Converters
Characteristic Curves
The following figures provide typical characteristics curves for the QRW040A0M (VO = 1.5 V) module at room temperature (TA
= 25 °C)
Figure 13. Input Voltage and Current Characteristics.
Figure 14. Converter Efficiency vs. Output Current.
Figure 15. Output Ripple Voltage (IO = IO, max).
Tested with a 220µF aluminium and a 1.0µF ceramic capacitor
across the load.
Figure 16. Transient Response to Step Decrease in
Load from 50% to 25% of Full Load (VI = 48
Vdc).
Figure 17. Transient Response to Step Increase in Load
from 50% to 75% of Full Load (VI = 48 Vdc).
Tested with a 10µF aluminium and a 1.0µF tantalum capacitor across
the load.
Figure 18. Start-up from Remote On/Off (IO = IO, max).
0
0.5
1
1.5
2
2.5
0 1020304050607080
INPUT VOLTAGE, VI (V)
INPUT CURRENT, I I (A)
EFFICIENCY, ( %)
η
OUTPUT CURRENT, Io (A)
TIME,t (1 µs/div)
36V, 40A
48V, 40A
75V, 40A
OUTPUT VOLTAGE,
V
O
(V)
(50 mV/div)
TIME, t (.1 ms/div)
OUTPUT CURRENT, I
O
(A)
(10 A/div) OUTPUT VOLTA GE, V
O
(V)
(100 mV/div)
TIME, t (.1 ms/div)
OUTPUT CURRENT, I
O
(A)
(10 A/div) OUTPUT VOLTAGE, V
O
(V)
(100 mV/div)
TIME, t (2 ms/div)
OUTPUT VOLTAGE, V
O
(V)
(.5 V/div)
REMOTE ON/OFF PIN,
V
ON/OFF
(V)
Lineage Power 12
Data Sheet
August 24, 2010 36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40 A
QRW010/025/035/040 Series Power Modules; dc-dc Converters
Electrical Specifications (continued)
Output Specifications for the QRW040A0Y (Vo = 1.8Vdc)
Isolation Specifications
General Specifications
Parameter Device Symbol Min Typ Max Unit
Output Voltage Set Point
(VI = 48 Vdc; IO = IO, min to IO, max, TA = 25 °C)
Y Vo 1.77 1.8 1.83 Vdc
Output Voltage
(Over all operating input voltage, resistive load, and
temperature conditions at steady state until end of life.)
Y Vo 1.75 — 1.85 Vdc
Output Regulation:
Line (VI = VI, min to VI, max)
Load (IO = IO, min to IO, max)
Temperature (TA = TA, min to TA, max)
Y—
—
—
—
—
—
0.05
0.05
15
0.2
0.2
50
%, VO, set
%, VO, set
mV
Output Ripple and Noise
RMS (5 Hz to 20 MHz bandwidth)
Peak-to-peak (5 Hz to 20 MHz bandwidth)
Y—
—
—
—
35
100
mVrms
mVp-p
External Load Capacitance — 25,000 µF
Output Current
(Vo =90% of VO, nom.)
YIO0.0—40Adc
Output Current-limit Inception
(VO = 90% of VO, set)
Y IO, lim — 45 — Adc
Output Short-circuit Current (Average)VO = 0.25 V Latched off
Efficiency
(VI = VIN, nom; IO = IO, max), TA = 25 °C
η—88— %
Switching Frequency All fSW — 300 — kHz
Dynamic Response
(DIO/Dt = 1 A/10 µs, VI = 48 V, TA = 25 °C); tested
with a 220 µF aluminium and a 1.0 µf ceramic
capacitor across the load.):
Load Change from
IO = 50% to 75% of IO, max:
Peak Deviation
Settling Time
(VO < 10% of peak deviation)
Load Change from IO = 50% to 25%
of IO, max :
Peak Deviation
Settling Time
(VO < 10% of peak deviation)
200
200
200
200
mV
µs
mV
µs
Parameter Symbol Min Typ Max Unit
Isolation Capacitance Ciso — 5600 — PF
Isolation Resistance Riso 10 — — MΩ
Parameter Min Typ Max Unit
Calculated MTBF (IO = 80% of IO, max TA = 40 °C) TBD Hours
Weight — 38(1.34) — g (oz.)
Lineage Power 13
Data Sheet
August 24, 2010 36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40 A
QRW010/025/035/040 Series Power Modules; dc-dc Converters
Feature Specifications
Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions.
See Feature Descriptions for additional information.
* A Minimum OFF Period of 1 sec is recommended.
Parameter Symbol Min Typ Max Unit
Remote On/Off Signal Interface*
(VI = 0 V to 75 V; open collector or equivalent compatible; signal
referenced to VI(–) terminal; see Figure 52
and Feature Descriptions.):
Preferred Logic:
Logic Low—Module On
Logic High—Module Off
Optional Logic:
Logic Low—Module Off
Logic High—Module On
Logic Low:
At Ion/off = 1.0 mA
At Von/off = 0.0 V
Logic High:
At Ion/off = 0.0 µA
Leakage Current
Turn-on Time; see Typical Start-up Curve(IO = IO max;
Vo within ±1% of steady state)
Von/off
Ion/off
Von/off
Ion/off
0
—
—
—
—
—
—
—
2
1.2
1.0
15
50
4
V
mA
V
µA
ms
Output Voltage Adjustment
(See Feature Descriptions):
Output Voltage Remote-sense Range
Output Voltage Set-point Adjustment Range (trim)
—
—
—
80
—
—
10
110
%VO,rated
%V0,nom
Output Overvoltage Protection VO, ovsd 2.0 — 2.5 V
Overtemperature Protection (IO = IO, max) Tref1 — 127 — °C
Lineage Power 14
Data Sheet
August 24, 2010 36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40 A
QRW010/025/035/040 Series Power Modules; dc-dc Converters
Characteristic Curves
The following figures provide typical characteristics curves for the QRW040A0Y (VO = 1.8 V) module at room temperature (TA
= 25 °C)
Figure 19. Input Voltage and Current Characteristics.
Figure 20. Converter Efficiency vs. Output Current.
Figure 21. Output Ripple Voltage (IO = IO, max).
Tested with a 220µF aluminium and a 1.0µF ceramic capacitor
across the load.
Figure 22. Transient Response to Step Decrease in
Load from 50% to 25% of Full Load
(VI = 48 Vdc).
Figure 23. Transient Response to Step Increase in
Load from 50% to 75% of Full Load
(VI = 48 Vdc).
Tested with a 10µF aluminium and a 1.0µF tantalum capacitor
across the load.
Figure 24. Start-up from Remote On/Off (IO = IO, max).
3.0
2.5
2.0
1.5
1.0
0.5
0
INPUT CURRENT, II (A)
INPUT V OLTAGE, VI (V)
IO = 50%
0 2040608
0
IO = 100%
IO = 10%
EFFICIENCY, ( %)
η
OUTPUT CURRENT, Io (A)
TIME, t (1 µs/div)
OUTPUT V OLTAGE, V
O
(V)
(50 mV/div)
V
I
= 36 V
V
I
= 48 V
V
I
= 75 V
TIME, t (0.1 ms/div)
OUTPUT V OLTA GE,
VO (V) (100 mV/div)
OUTPUT CURRENT,
IO (A) (10 A/div)
TIME, t (0.1 ms/div)
OUTPUT V OLTAGE,
VO (V) (100 mV/div)
OUTPUT CURRENT,
IO (A) (10 A/div)
TIME, t (2 ms/div)
OUTPUT V OLTA GE,
V
O
(V) (0.5 V/div)
REMOTE ON/OFF,
V
ON/OFF
(5 V/div)
Lineage Power 15
Data Sheet
August 24, 2010 36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40 A
QRW010/025/035/040 Series Power Modules; dc-dc Converters
Electrical Specifications (continued)
Output Specifications for the QRW035A0G (Vo = 2.5Vdc)
Isolation Specifications
General Specifications
Parameter Device Symbol Min Typ Max Unit
Output Voltage Set Point
(VI = 48 Vdc; IO = IO, min to IO, max, TA = 25 °C)
G Vo 2.47 2.5 2.53 Vdc
Output Voltage
(Over all operating input voltage, resistive load, and
temperature conditions at steady state until end of life.)
G Vo 2.42 — 2.58 Vdc
Output Regulation:
Line (VI = VI, min to VI, max)
Load (IO = IO, min to IO, max)
Temperature (TA = TA, min to TA, max)
G—
—
—
—
—
—
0.05
0.05
15
0.2
0.2
50
%, VO, set
%, VO, set
mV
Output Ripple and Noise
RMS (5 Hz to 20 MHz bandwidth)
Peak-to-peak (5 Hz to 20 MHz bandwidth)
G—
—
—
—
35
100
mVrms
mVp-p
External Load Capacitance — 25,000 µF
Output Current
(Vo =90% of VO, nom.)
GIO0.0—35Adc
Output Current-limit Inception
(VO = 90% of VO, set)
G IO, lim — 39 — Adc
Output Short-circuit Current (Average)VO = 0.25 V Latched off
Efficiency
(VI = VIN, nom; IO = IO, max), TA = 25 °C
η—90— %
Switching Frequency All fSW — 300 — kHz
Dynamic Response
(DIO/Dt = 1 A/10 µs, VI = 48 V, TA = 25 °C); tested
with a 220 µF aluminium and a 1.0 µf ceramic
capacitor across the load.):
Load Change from
IO = 50% to 75% of IO, max:
Peak Deviation
Settling Time
(VO < 10% of peak deviation)
Load Change from IO = 50% to 25%
of IO, max :
Peak Deviation
Settling Time
(VO < 10% of peak deviation)
150
200
150
200
mV
µs
mV
µs
Parameter Symbol Min Typ Max Unit
Isolation Capacitance Ciso — 5600 — PF
Isolation Resistance Riso 10 — — MΩ
Parameter Min Typ Max Unit
Calculated MTBF (IO = 80% of IO, max TA = 40 °C) TBD Hours
Weight — 38(1.34) — g (oz.)
Lineage Power 16
Data Sheet
August 24, 2010 36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40 A
QRW010/025/035/040 Series Power Modules; dc-dc Converters
Feature Specifications
Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions.
See Feature Descriptions for additional information.
* A Minimum OFF Period of 1 sec is recommended.
Parameter Symbol Min Typ Max Unit
Remote On/Off Signal Interface*
(VI = 0 V to 75 V; open collector or equivalent compatible; signal
referenced to VI(–) terminal; see Figure 52
and Feature Descriptions.):
Preferred Logic:
Logic Low—Module On
Logic High—Module Off
Optional Logic:
Logic Low—Module Off
Logic High—Module On
Logic Low:
At Ion/off = 1.0 mA
At Von/off = 0.0 V
Logic High:
At Ion/off = 0.0 µA
Leakage Current
Turn-on Time; see Typical Start-up Curve(IO = IO max;
Vo within ±1% of steady state)
Von/off
Ion/off
Von/off
Ion/off
0
—
—
—
—
—
—
—
2
1.2
1.0
15
50
4
V
mA
V
µA
ms
Output Voltage Adjustment
(See Feature Descriptions):
Output Voltage Remote-sense Range
Output Voltage Set-point Adjustment Range (trim)
—
—
—
80
—
—
10
110
%VO,rated
%V0,nom
Output Overvoltage Protection VO, ovsd 2.9 — 3.2 V
Overtemperature Protection (IO = IO, max) Tref1 — 127 — °C
Lineage Power 17
Data Sheet
August 24, 2010 36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40 A
QRW010/025/035/040 Series Power Modules; dc-dc Converters
Characteristic Curves
The following figures provide typical characteristics curves for the QRW035A0G (VO = 2.5 V) module at room temperature (TA
= 25 °C)
Figure 25. Input Voltage and Current Characteristics.
Figure 26. Converter Efficiency vs. Output Current.
Figure 27. Output Ripple Voltage (IO = IO, max).
Tested with a 220µF aluminium and a 1.0µF ceramic capacitor
across the load.
Figure 28. Transient Response to Step Decrease in
Load from 50% to 25% of Full Load
(VI = 48 Vdc).
Figure 29. Transient Response to Step Increase in
Load from 50% to 75% of Full Load
(VI = 48 Vdc).
Tested with a 10µF aluminium and a 1.0µF tantalum capacitor
across the load.
Figure 30. Start-up from Remote On/Off (IO = IO, max).
0
0.5
1
1.5
2
2.5
3
3.5
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75
INPUT VOLTAGE, V
I
(V)
INPUT CURRENT, I
I
(A)
I
O
= 35 A
I
O
= 17.5 A
I
O
= 3.5 A
70
75
80
85
90
95
0 4 7 1114182125283235
OUTPUT CURRENT, I
O
(A)
EFFICIENCY, η (%)
V
I
= 36 V
V
I
= 48 V
V
I
= 75 V
TIME t, (1µs/div)
OUTPUT VOLT A GE, V
O
(V)
(50 mV/div)
36V, 35A
48V, 35A
75V, 35A
TIME, t (.10 ms/div)
OUTPUT CURRENT, I
O
(A)
(5 A/div) OUTPUT VOLTAGE, V
O
(V
)
(50 mV/div)
TIME, t (.10 ms/div)
OUTPUT CURRENT, I
O
(A)
(5 A/div) OUTPUT VOLTAGE, V
O
(V)
(50 m V/div)
TIME, t (1 ms/div)
REMOTE ON/OFF PIN,
V
ON/OFF
(V) OUTPUT V OLTA GE, V
O
(V)
(1 V/div)
Lineage Power 18
Data Sheet
August 24, 2010 36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40 A
QRW010/025/035/040 Series Power Modules; dc-dc Converters
Electrical Specifications (continued)
Output Specifications for the QRW035A0F (Vo = 3.3Vdc)
Isolation Specifications
General Specifications
Parameter Device Symbol Min Typ Max Unit
Output Voltage Set Point
(VI = 48 Vdc; IO = IO, min to IO, max, TA = 25 °C)
F Vo 3.24 3.3 3.36 Vdc
Output Voltage
(Over all operating input voltage, resistive load, and
temperature conditions at steady state until end of life.)
F Vo 3.2 — 3.4 Vdc
Output Regulation:
Line (VI = VI, min to VI, max)
Load (IO = IO, min to IO, max)
Temperature (TA = TA, min to TA, max)
F—
—
—
—
—
—
0.05
0.05
15
0.2
0.2
50
%, VO, set
%, VO, set
mV
Output Ripple and Noise
RMS (5 Hz to 20 MHz bandwidth)
Peak-to-peak (5 Hz to 20 MHz bandwidth)
F—
—
—
—
30
100
mVrms
mVp-p
External Load Capacitance — 30,000 µF
Output Current
(Vo =90% of VO, nom.)
FIO0.0—35Adc
Output Current-limit Inception
(VO = 90% of VO, set)
F IO, lim — 39 — Adc
Output Short-circuit Current (Average)VO = 0.25 V Latched off
Efficiency
(VI = VIN, nom; IO = IO, max), TA = 25 °C
η—91— %
Switching Frequency All fSW — 300 — kHz
Dynamic Response
(DIO/Dt = 1 A/10 µs, VI = 48 V, TA = 25 °C); tested
with a 220 µF aluminium and a 1.0 µf ceramic
capacitor across the load.):
Load Change from
IO = 50% to 75% of IO, max:
Peak Deviation
Settling Time
(VO < 10% of peak deviation)
Load Change from IO = 50% to 25%
of IO, max :
Peak Deviation
Settling Time
(VO < 10% of peak deviation)
160
300
160
300
mV
µs
mV
µs
Parameter Symbol Min Typ Max Unit
Isolation Capacitance Ciso — 5600 — PF
Isolation Resistance Riso 10 — — MΩ
Parameter Min Typ Max Unit
Calculated MTBF (Io = 80% of Io, max Ta = 40 °C), Issue 1, M1, C1 1,700,000 Hours
Weight — 37(1.31) — g (oz.)
Lineage Power 19
Data Sheet
August 24, 2010 36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40 A
QRW010/025/035/040 Series Power Modules; dc-dc Converters
Feature Specifications
Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions. See
Feature Descriptions for additional information.
* A Minimum OFF Period of 1 sec is recommended.
Parameter Symbol Min Typ Max Unit
Remote On/Off Signal Interface*
(VI = 0 V to 75 V; open collector or equivalent compatible; signal
referenced to VI(–) terminal; see Figure 52
and Feature Descriptions.):
Preferred Logic:
Logic Low—Module On
Logic High—Module Off
Optional Logic:
Logic Low—Module Off
Logic High—Module On
Logic Low:
At Ion/off = 1.0 mA
At Von/off = 0.0 V
Logic High:
At Ion/off = 0.0 µA
Leakage Current
Turn-on Time; see Typical Start-up Curve(IO = IO max;
Vo within ±1% of steady state)
Von/off
Ion/off
Von/off
Ion/off
0
—
—
—
—
—
—
—
2
1.2
1.0
15
50
4
V
mA
V
µA
ms
Output Voltage Adjustment
(See Feature Descriptions):
Output Voltage Remote-sense Range
Output Voltage Set-point Adjustment Range (trim)
—
—
—
80
—
—
0.5
110
V
%V0,nom
Output Overvoltage Protection VO, ovsd 3.8 — 4.6 V
Overtemperature Protection (IO = IO, max) Tref1 — 127 — °C
Lineage Power 20
Data Sheet
August 24, 2010 36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40 A
QRW010/025/035/040 Series Power Modules; dc-dc Converters
Characteristic Curves
The following figures provide typical characteristics curves for the QRW035A0F (VO = 3.3 V) module at room temperature (TA
= 25 °C)
Figure 31. Input Voltage and Current Characteristics.
Figure 32. Converter Efficiency vs. Output Current.
Figure 33. Output Ripple Voltage (IO = IO, max).
Tested with a 220µF aluminium and a 1.0µF ceramic capacitor
across the load.
Figure 34. Transient Response to Step Decrease in
Load from 50% to 25% of Full Load
(VI = 48 Vdc).
Figure 35. Transient Response to Step Increase in
Load from 50% to 75% of Full Load
(VI = 48 Vdc).
Tested with a 10µF aluminium and a 1.0µF tantalum capacitor
across the load.
Figure 36. Start-up from Remote On/Off (IO = IO, max).
INPUT V OLTAGE, V
I
(V)
INPUT CURRENT, I
I
(A)
30 35 40 45 50 55 60 65 70 75 8
0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
IO = 35 A
IO = 25 A
IO = 0 A
EFFICIENCY, η (%)
5 101520253035
92
90
88
86
84
82
80
VI = 36 V
VI = 48 V
VI = 75 V
TIME, t (2 µs/div)
OUTPUT V OLT A GE,
VO (V) (20 mV/div)
36 V, 35 A
48 V 35 A
75 V 35 A
OUTPUT CURRENT, I
O
(A)
(10 A/div) OUTPUT VOLTAGE, VO
(V
(100 mV/div)
OUTPUT CURRENT, I
O
(A)
(10 A/div) OUTPUT V OLT A GE, V
O
(V
(100 mV/div)
TIME, t (2 ms/div)
REMOTE ON/ OFF ( V)
(V on/off)
OUTPUT VOLTAGE, Vo (V)
(1 V/div)
Lineage Power 21
Data Sheet
August 24, 2010 36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40 A
QRW010/025/035/040 Series Power Modules; dc-dc Converters
Electrical Specifications (continued)
Output Specifications for the QRW025A0A (Vo = 5.0 Vdc)
Isolation Specifications
General Specifications
Parameter Device Symbol Min Typ Max Unit
Output Voltage Set Point
(VI = 48 Vdc; IO = IO, min to IO, max, TA = 25 °C)
A Vo 4.95 5.0 5.05 Vdc
Output Voltage
(Over all operating input voltage, resistive load, and
temperature conditions at steady state until end of life.)
A Vo 4.85 — 5.15 Vdc
Output Regulation:
Line (VI = VI, min to VI, max)
Load (IO = IO, min to IO, max)
Temperature (TA = TA, min to TA, max)
A—
—
—
—
—
—
0.05
0.05
15
0.2
0.2
50
%, VO, set
%, VO, set
mV
Output Ripple and Noise
RMS (5 Hz to 20 MHz bandwidth)
Peak-to-peak (5 Hz to 20 MHz bandwidth)
A—
—
—
—
30
100
mVrms
mVp-p
External Load Capacitance — 10,000 µF
Output Current
(Vo =90% of VO, nom.)
AIO0.0—25Adc
Output Current-limit Inception
(VO = 90% of VO, set)
A IO, lim — 30 — Adc
Output Short-circuit Current (Average)VO = 0.25 V Latched off
Efficiency
(VI = VIN, nom; IO = IO, max), TA = 25 °C
η— 91.5 — %
Switching Frequency All fSW — 300 — kHz
Dynamic Response
(DIO/Dt = 1 A/10 µs, VI = 48 V, TA = 25 °C); tested
with a 220 µF aluminium and a 1.0 µf ceramic
capacitor across the load.):
Load Change from
IO = 50% to 75% of IO, max:
Peak Deviation
Settling Time
(VO < 10% of peak deviation)
Load Change from IO = 50% to 25%
of IO, max :
Peak Deviation
Settling Time
(VO < 10% of peak deviation)
250
200
250
200
mV
µs
mV
µs
Parameter Symbol Min Typ Max Unit
Isolation Capacitance Ciso — 5600 — PF
Isolation Resistance Riso 10 — — MΩ
Parameter Min Typ Max Unit
Calculated MTBF (Io = 80% of Io, max Ta = 40 °C), Issue 1, M1,C1 1,219,777 Hours
Weight — 37(1.31) — g (oz.)
Lineage Power 22
Data Sheet
August 24, 2010 36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40 A
QRW010/025/035/040 Series Power Modules; dc-dc Converters
Feature Specifications
Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions.
See Feature Descriptions for additional information.
* A Minimum OFF Period of 1 sec is recommended.
Parameter Symbol Min Typ Max Unit
Remote On/Off Signal Interface*
(VI = 0 V to 75 V; open collector or equivalent compatible; signal
referenced to VI(–) terminal; see Figure 52
and Feature Descriptions.):
Preferred Logic:
Logic Low—Module On
Logic High—Module Off
Optional Logic:
Logic Low—Module Off
Logic High—Module On
Logic Low:
At Ion/off = 1.0 mA
At Von/off = 0.0 V
Logic High:
At Ion/off = 0.0 µA
Leakage Current
Turn-on Time; see Typical Start-up Curve(IO = IO max;
Vo within ±1% of steady state)
Von/off
Ion/off
Von/off
Ion/off
0
—
—
—
—
—
—
—
1
1.2
1.0
15
50
4
V
mA
V
µA
ms
Output Voltage Adjustment
(See Feature Descriptions):
Output Voltage Remote-sense Range
Output Voltage Set-point Adjustment Range (trim)
—
—
—
80
—
—
0.5
110
V
%V0,nom
Output Overvoltage Protection VO, ovsd 5.6 — 6.8 V
Overtemperature Protection (IO = IO, max) Tref1 — 127 — °C
Lineage Power 23
Data Sheet
August 24, 2010 36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40 A
QRW010/025/035/040 Series Power Modules; dc-dc Converters
Characteristic Curves
The following figures provide typical characteristics curves for the QRW025A0A (VO = 5.0V) module at room temperature (TA =
25 °C)
Figure 37. Input Voltage and Current Characteristics.
Figure 38. Converter Efficiency vs. Output Current.
Figure 39. Output Ripple Voltage (IO = IO, max).
Tested with a 220µF aluminium and a 1.0µF ceramic capacitor
across the load.
Figure 40. Transient Response to Step Decrease in
Load from 50% to 25% of Full Load
(VI = 48 Vdc).
Figure 41. Transient Response to Step Increase in Load
from 50% to 75% of Full Load
(VI = 48 Vdc).
Tested with a 10µF aluminium and a 1.0µF tantalum capacitor across
the load.
Figure 42. Start-up from Remote On/Off (IO = IO, max).
25 30 35 40 45 50 55 60 65 70 7
5
4
3.5
3
2.5
2
1.5
1
0.5
0
INPUT V OLTAGE, V
I
(V)
INPUT CURRENT, I
I
(A)
IO = 25 A
IO = 12.5 A
IO = 0.5 A
0 5 10 15 20 2
5
95
90
85
80
75
70
OUTPUT CURRENT, I
O
(A)
EFFICENCY, η (%)
VI = 36 V
VI = 48 V
VI = 75 V
TIME, t (1 µs/div)
OUTPUT V OLTAGE, V
O
(V)
(50 mV/div)
VI = 36 V
VI = 48 V
VI = 75 V
TIME, t (100 µs/div)
OUTPUT CURRENT, I
O
(A)
( 5 A/div)
OUTPUT V OLTAGE, V
O
(V)
(200 mV/div)
TIME, t (100 µs/div)
OUTPUT CURRENT, I
O
(A)
( 5 A/div)
OUTPUT V OLTA GE, V
O
(V)
(200 mV/div)
TIME, t (1 ms/div)
REMOTE ON/OFF,
V
ON/OFF
(V) OUTPUT V OLTAGE
, (
(2 V/div)
Lineage Power 24
Data Sheet
August 24, 2010 36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40 A
QRW010/025/035/040 Series Power Modules; dc-dc Converters
Electrical Specifications (continued)
Output Specifications for the QRW010A0B (Vo = 12.0 Vdc)
Isolation Specifications
General Specifications
Parameter Device Symbol Min Typ Max Unit
Output Voltage Set Point
(VI = 48 Vdc; IO = IO, min to IO, max, TA = 25 °C)
B Vo 11.76 12 12.24 Vdc
Output Voltage
(Over all operating input voltage, resistive load, and
temperature conditions at steady state until end of life.)
B Vo 11.64 — 12.36 Vdc
Output Regulation:
Line (VI = VI, min to VI, max)
Load (IO = IO, min to IO, max)
Temperature (TA = TA, min to TA, max)
B—
—
—
—
—
—
0.05
0.05
15
0.2
0.2
50
%, VO, set
%, VO, set
mV
Output Ripple and Noise
RMS (5 Hz to 20 MHz bandwidth)
Peak-to-peak (5 Hz to 20 MHz bandwidth)
B—
—
—
—
30
100
mVrms
mVp-p
External Load Capacitance — 2200 µF
Output Current
(Vo =90% of VO, nom.)
BIO0.0—10Adc
Output Current-limit Inception
(VO = 90% of VO, set)
B IO, lim — 12 — Adc
Output Short-circuit Current (Average)VO = 0.25 V Latched off
Efficiency
(VI = VIN, nom; IO = IO, max), TA = 25 °C
η— 92.5 — %
Switching Frequency All fSW — 300 — kHz
Dynamic Response
(DIO/Dt = 1 A/10 µs, VI = 48 V, TA = 25 °C); tested
with a 220 µF aluminium and a 1.0 µf ceramic
capacitor across the load.):
Load Change from
IO = 50% to 75% of IO, max:
Peak Deviation
Settling Time
(VO < 10% of peak deviation)
Load Change from IO = 50% to 25%
of IO, max :
Peak Deviation
Settling Time
(VO < 10% of peak deviation)
360
300
360
300
mV
µs
mV
µs
Parameter Symbol Min Typ Max Unit
Isolation Capacitance Ciso — 5600 — PF
Isolation Resistance Riso 10 — — MΩ
Parameter Min Typ Max Unit
Calculated MTBF (Io = 80% of Io, max, Ta = 40 °C), Issue 1, M1,C1 1,227,000 Hours
Weight — 37(1.31) — g (oz.)
Lineage Power 25
Data Sheet
August 24, 2010 36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40 A
QRW010/025/035/040 Series Power Modules; dc-dc Converters
Feature Specifications
Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature conditions.
See Feature Descriptions for additional information.
* A Minimum OFF Period of 1 sec is recommended.
Parameter Symbol Min Typ Max Unit
Remote On/Off Signal Interface*
(VI = 0 V to 75 V; open collector or equivalent compatible; signal
referenced to VI(–) terminal; see Figure 52
and Feature Descriptions.):
Preferred Logic:
Logic Low—Module On
Logic High—Module Off
Optional Logic:
Logic Low—Module Off
Logic High—Module On
Logic Low:
At Ion/off = 1.0 mA
At Von/off = 0.0 V
Logic High:
At Ion/off = 0.0 µA
Leakage Current
Turn-on Time; see Typical Start-up Curve(IO = IO max;
Vo within ±1% of steady state)
Von/off
Ion/off
Von/off
Ion/off
0
—
—
—
—
—
—
—
2
1.2
1.0
15
50
4
V
mA
V
µA
ms
Output Voltage Adjustment
(See Feature Descriptions):
Output Voltage Remote-sense Range
Output Voltage Set-point Adjustment Range (trim)
—
—
—
80
—
—
0.5
110
V
%V0,nom
Output Overvoltage Protection VO, ovsd 13.5 15 16.5 V
Overtemperature Protection (IO = IO, max) Tref1 — 127 — °C
Lineage Power 26
Data Sheet
August 24, 2010 36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40 A
QRW010/025/035/040 Series Power Modules; dc-dc Converters
Characteristic Curves
The following figures provide typical characteristics curves for the QRW010A0B (VO = 12.0V) module at room temperature (TA
= 25 °C)
Figure 43. Input Voltage and Current Characteristics.
Figure 44. Converter Efficiency vs. Output Current.
Figure 45. Output Ripple Voltage (IO = IO, max).
Tested with a 220µF aluminium and a 1.0µF ceramic capacitor
across the load.
Figure 46. Transient Response to Step Decrease in
Load from 50% to 25% of Full Load
(VI = 48 Vdc).
Figure 47. Transient Response to Step Increase in Load
from 50% to 75% of Full Load
(VI = 48 Vdc).
Tested with a 10µF aluminium and a 1.0µF tantalum capacitor across
the load.
Figure 48. Start-up from Remote On/Off (IO = IO, max).
0
0.5
1
1.5
2
2.5
3
3.5
4
25 35 45 55 65 7
5
INPUT VOLTAGE, V
I
(V)
INPUT CURRENT, I
I
(A)
IO = 10 A
IO = 5 A
IO = 0 A
EFFICIENCY, ( %)
η
OUTPUT CURRENT, Io (A)
TIME, t (1 µs/div)
OUTPUT V OLTAGE, V
O
(V)
(50 mV/div)
V
I
= 36 V
V
I
= 48 V
V
I
= 75 V
TIME, t (100 µs/div)
OUTPUT V OLTAGE, V
O
(
V)
(200 mV/div)
O
UTPUT CURRENT, I
O
(A)
(2 A/div)
TIME, t (100 µs/div)
OUTPUT V OLTAGE, V
O
(V)
(200 mV/div)
O
UTPUT CURRENT, I
O
(A)
(2 A/div)
2
Lineage Power 27
Data Sheet
August 24, 2010 36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40 A
QRW010/025/035/040 Series Power Modules; dc-dc Converters
Test Configurations
Note:Measure input reflected-ripple current with a simulated
source inductance (LTEST) of 12 µH. Capacitor CS off-
sets possible battery impedance. Measure current as
shown above.
Figure 49. Input Reflected-Ripple Test Setup.
Note:Use a 1.0 µF ceramic capacitor and a 10 µF aluminum
or
tantalum capacitor. Scope measurement should be
made using a BNC socket. Position the load between
51 mm and 76 mm (2 in. and 3 in.) from the module.
Figure 50. Peak-to-Peak Output Noise Measurement Test
Setup.
Note:All measurements are taken at the module terminals.
When socketing, place Kelvin connections at module
terminals to avoid measurement errors due to socket
contact resistance.
Figure 51. Output Voltage and Efficiency Measurement.
Design Considerations
Input Source Impedance
The power module should be connected to a low
ac-impedance input source. Highly inductive source imped-
ances can affect the stability of the power
module. For the test configuration in 49,
a 33 µF electrolytic capacitor (ESR < 0.7 W at 100 kHz)
mounted close to the power module helps ensure
stability of the unit. For other highly inductive source imped-
ances, consult the factory for further application guidelines.
Output Capacitance
High output current transient rate of change (high di/dt) loads
may require high values of output capacitance to supply the
instantaneous energy requirement to the load. Tp minimize
the output voltage transient drop
during this transient, low E.S.R. (equivalent series resistance)
capacitors may be required, since a high E.S.R. will produce
a correspondingly higher voltage drop during the current tran-
sient.
Output capacitance and load impedance interact with the
power module’s output voltage regulation control system and
may produce an ’unstable’ output condition for the required
values of capacitance and E.S.R.. Minimum and maximum
values of output capacitance and of the capacitor’s associ-
ated E.S.R. may be dictated, depending on the module’s con-
trol system.
The process of determining the acceptable values
of capacitance and E.S.R. is complex and is
load-dependant. Lineage provides Web-based tools to assist
the power module end-user in appraising and adjusting the
effect of various load conditions and output capacitances
on specific power modules for various load conditions.
Safety Considerations
For safety-agency approval of the system in which the power
module is used, the power module must be installed in com-
pliance with the spacing and separation requirements of the
end-use safety agency standard, i.e., UL60950, CSA C22.2
No. 60950-00, and VDE 0805:2001-12 (IEC60950, 3rd Ed).
These converters have been evaluated to the spacing
requirements for Basic Insulation, per the above safety stan-
dards and 1500 Vdc is applied from VI to VO to 100% of out-
going production.
For end products connected to –48 Vdc, or –60 Vdc nomianl
DC MAINS (i.e. central office dc battery plant), no further fault
testing is required.
Note:–60 V dc nominal bettery plants are not available in the
U.S. or Canada.
For all input voltages, other than DC MAINS, where the input
voltage is less than 60 Vdc, if the input meets all of the
requirements for SELV, then:
V
I
(+)
V
I
(–)
CURRENT
PROBE
TO
OSCILLOSCOPE
L
TEST
12
μ
H
BATTERY
C
S
220
μ
F
ESR < 0.1
Ω
@ 20 ºC 100 kHz
COPPER STRIPS
1.0
μ
F10
μ
FSCOPE
V
O
(+)
RESISTIVE
V
O
(-)
LOAD
CONTACT AND
SUPPLY
I
I
CONTACT
V
I
(+)
V
I
(–)
V
O
(+)
DISTRIBUTION LOSSES
RESISTANCE
I
O
LOAD
V
O
(–)
SENSE(–)
SENSE(+)
ηVO(+) VO(-)–[]IO
VI(+) VI(-)–[]II
----------------------------------------------
⎝⎠
⎛⎞
100 %×=
Lineage Power 28
Data Sheet
August 24, 2010 36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40 A
QRW010/025/035/040 Series Power Modules; dc-dc Converters
n
The output may be considered SELV. Output voltages will
remain withing SELV limits even with internally-generated
non-SELV voltages. Single component failure and fault
tests were performed in the power converters.
n
One pole of the input and one pole of the output are to be
grounded, or both circuits are to be kept floating, to main-
tain the output voltage to ground voltage within ELV or
SELV limits.
For all input sources, other than DC MAINS, where the input
voltage is between 60 and 75 Vdc (Classified as TNV-2 in
Europe), the following must be adhered to, if the converter’s
output is to be evaluated for SELV:
n
The input source is to be provided with reinforced insula-
tion from any hazardous voltage, including the AC mains.
n
One VI pin and one VO pin are to be reliably earthed, or
both the input and output pins are to be kept floating.
n
Another SELV reliability test is conducted on the whole
system, as required by the safety agencies, on the combi-
nation of supply source and the subject module to verify
that under a single fault, hazardous voltages do not
appear at the module’s output.
The power module has ELV (extra-low voltage) outputs
when all inputs are ELV.
All flammable materials used in the manufacturing of these
modules are rated 94V-0, and UL60950A.2 for reduced
thicknesses. The input to these units is to be provided with a
maximum 10A normal-blow fuse in the ungrounded lead.
Lineage Power 29
Data Sheet
August 24, 2010 36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40 A
QRW010/025/035/040 Series Power Modules; dc-dc Converters
Feature Descriptions
Overcurrent Protection
To provide protection in a fault output overload condition, the
module is equipped with internal current-limiting circuitry and
can endure current limit for few seconds. If overcurrent per-
sists for few seconds, the module will shut down and remain
latch-off.
The overcurrent latch is reset by either cycling the input
power or by toggling the on/off pin for one second. If the out-
put overload condition still exists when the module restarts, it
will shut down again. This operation will continue indefinitely
until the overcurrent condition is corrected.
An auto-restart option is also available.
Remote On/Off
Two remote on/off options are available. Positive logic remote
on/off turns the module on during a logic-high voltage on the
ON/OFF pin, and off during a logic low. Negative logic remote
on/off turns the module off during a logic high and on during a
logic low. Negative logic, device code suffix "1," is the factory-
preferred configuration.
To turn the power module on and off, the user must supply a
switch to control the voltage between the on/off terminal and
the VI(-) terminal (Von/off). The switch can be an open collec-
tor or equivalent (see Figure 10). A logic low is Von/off = 0 V
to I.2 V. The maximum Ion/off during a logic low is 1 mA. The
switch should maintain a logic-low voltage while sinking 1
mA.
During a logic high, the maximum Von/off generated by the
power module is 15 V. The maximum allowable leakage cur-
rent of the switch at Von/off = 15V is 50 µA.
If not using the remote on/off feature, do one of the following
to turn the unit on
For negative logic, short ON/OFF pin to VI(-).
For positive logic: leave ON/OFF pin open.
Figure 52. Remote On/Off Implementation.
Remote Sense
Remote sense minimizes the effects of distribution losses by
regulating the voltage at the remote-sense connections. The
voltage between the remote-sense pins and the output termi-
nals must not exceed the output voltage sense range given in
the Feature Specifications table i.e.:
[Vo(+) – Vo(-)] – [SENSE(+) – SENSE(-)] £ 10% of Vo, rated
The voltage between the Vo(+) and Vo(-) terminals must not
exceed the minimum output overvoltage shutdown value indi-
cated in the Feature Specifications table. This limit includes
any increase in voltage due to remote-sense compensation
and output voltage set-point adjustment (trim). See Figure 53.
If not using the remote-sense feature to regulate the output at
the point of load, then connect SENSE(+) to Vo(+) and
SENSE(-) to Vo(-) at the module.
Although the output voltage can be increased by both the
remote sense and by tine trim, the maximum increase for the
output voltage is not the sum of both. The maximum increase
is the larger of either the remote sense or the trim.
The amount of power delivered by the module is defined as
the voltage at the output terminals multiplied by the output
current. When using remote sense and trim: the output volt-
age of the module can be increased, which at the same out-
put current would increase the power output of the module.
Care should be taken to ensure that the maximum output
power of the module remains at or below the maximum rated
power.
Figure 53. Effective Circuit Configuration for
Single-Module Remote-Sense Operation
Output Voltage.
Output Overvoltage Protection
The output overvoltage protection consists of circuitry that
monitors the voltage on the output terminals. If the voltage on
the output terminals exceeds the over
voltage protection threshold, then the module will
shutdown and latch off. The overvoltage latch is reset by
either cycling the input power for one second or by toggling
the on/off signal for one second.
The protection mechanism is such that the unit can continue
in this condition until the fault is cleared.
Overtemperature Protection
These modules feature an overtemperature protection circuit
to safeguard against thermal damage. The circuit shuts down
and latches off the module when the maximum device refer-
ence temperature is exceeded. The module can be restarted
by cycling the dc input power for at least one second or by
toggling the remote on/off signal for at least one second.
SENSE(+)
V
O
(+)
SENSE(–)
V
O
(–)
V
I
(–)
+
–
I
on/off
ON/OFF
V
I
(+)
LOAD
V
on/off
SENSE(+)
SENSE(–)
VI(+)
VI(–)
IOLOAD
CONTACT AND
SUPPLY II
CONTACT
VO(+)
VO(–)
DISTRIBUTION LOSSESRESISTANCE
Lineage Power 30
Data Sheet
August 24, 2010 36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40 A
QRW010/025/035/040 Series Power Modules; dc-dc Converters
Feature Descriptions (Continued)
Output Voltage Set-Point Adjustment (Trim)
Trimming allows the user to increase or decrease the output
voltage set point of a module. This is accomplished by con-
necting an external resistor between the TRIM pin and either
the SENSE(+) or SENSE(-) pins. The trim resistor should be
positioned close to the module
.
If not using the trim feature, leave the TRIM pin open.
With an external resistor between the TRIM and SENSE(-)
pins (Radj-down), the output voltage set point (Vo,adj)
decreases (see Figure 54). The following equation deter-
mines the required external-resistor value to obtain a per-
centage output voltage change of D%.
For Output Voltage: 1.0V - 12V
With an external resistor connected between the TRIM and
SENSE(+) pins (Radj-up), the output voltage set point
(Vo,adj) increases (see Figure 55).
The following equation determines the required external-
resistor value to obtain a percentage output voltage change
of D%
For Output Voltage: 1.5V - 12V
For Output Voltage: 1.2V, 1.0V
The voltage between the Vo(+) and Vo(-) terminals must not
exceed the minimum output overvoltage shut-down value
indicated in the Feature Specifications table. This limit
includes any increase in voltage due to remote-sense com-
pensation and output voltage set-point adjustment (trim).
See Figure 53.
Although the output voltage can be increased by both the
remote sense and by the trim, the maximum increase for the
output voltage is not the sum of both. The maximum
increase is the larger of either the remote sense or the trim.
The amount of power delivered by the module is defined as
the voltage at the output terminals multiplied by the output
current. When using remote sense and trim, the output volt-
age of the module can be increased, which at the same out-
put current would increase the power output of the module.
Care should be taken to ensure that the maximum output
power of the module remains at or below the maximum rated
power.
Figure 54. Circuit Configuration to Decrease Output
Voltage.
Figure 55. Circuit Configuration to Increase Output
Voltage.
VI
(+)
VI(–)
ON/OFF
CASE
VO(+)
VO(–)
SENSE(+)
TRIM
SENSE(–)
Radj-down
RLOAD
VI
(+)
VI(–)
ON/OFF
CASE
VO(+)
VO(–)
SENSE(+)
TRIM
SENSE(–)
Radj-up
RLOAD
Lineage Power 31
Data Sheet
August 24, 2010 36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40 A
QRW010/025/035/040 Series Power Modules; dc-dc Converters
Thermal Considerations
The power modules operate in a variety of thermal environ-
ments; however, sufficient cooling should be provided to help
ensure reliable operation of the unit. Heat-dissipating compo-
nents are mounted on the top side of the module. Heat is
removed by conduction, convection and radiation to the sur-
rounding environment. Proper cooling can be verified by
measuring the temperature of selected components on the
topside of the power module (See 56). Peak temperature
(Tref) can occur at any of these positions indicated in Figure
50.
Note:Top view, pin locations are for reference only.
Figure 56. Temperature Measurement Location.
The temperature at any one of these locations should not
exceed per 1 to ensure reliable operation of the power mod-
ule. The output power of the module should not exceed the
rated power for the module as listed in the Ordering Informa-
tion table.
Although the maximum Tref temperature of the power mod-
ules is per 1, you can limit these temperatures to a lower
value for extremely high reliability.
Table 1. Device Temperature
Heat Transfer Without Heat Sinks
Increasing airflow over the module enhances the heat trans-
fer via convection. Figures 57 through 64 shows the maxi-
mum current that can be delivered by the corresponding
module without exceeding the maximum case temperature
versus local ambient temperature (TA) for natural convection
through 2 m/s (400 ft./min.).
Note that the natural convection condition was measured at
0.05 m/s to 0.1 m/s (10ft./min. to 20 ft./min.); however, sys-
tems in which these power modules may be used typically
generate natural convection airflow rates of 0.3 m/s (60 ft./
min.) due to other heat dissipating components in the system.
The use of output power derating curve is shown in the fol-
lowing example.
What is the minimum airflow necessary for a QRW035A0F
operating at VI = 48 V, an output current of 23A, and a maxi-
mum ambient temperature of 70 °C.
Solution
Given: VI = 48V
Io = 23A
TA = 7 0 °C
Determine airflow (v) (Use Figure 62):
v = 1m/sec. (200ft./min.)
Figure 57. Output Power Derating for QRW040A0S1R0
(Vo = 1.0V) in Transverse Orientation with No
Baseplate; Airflow direction from VIN (+) to
VIN (–); VIN = 48V.
Figure 58. Output Power Derating for QRW040A0P (Vo =
1.2V) in Transverse Orientation with No
Baseplate; Airflow direction from VIN (+) to
VIN (–); VIN = 48V.
Output Voltage Device Temperature (°C)
1.0V Tref1 116
1.2V Tref1 119
1.5V Tref1 118
1.8V Tref1 117
2.5V Tref1 118
3.3V Tref1
Tref2
Tref3
114
112
130
5V Tref1 113
12V Tref1 118
OUTPUT
INPUT
Airflow
Thermocouple
Location Tref 3Thermocouple
Location Tref 2
Thermocouple
Location Tref 1
LOCAL AMBIENT TEMPERATURE, T (°C)
A
OUTPUT CURRENT, I (A)
O
40
35
30
25
20
15
10
5
0
20 30 40 50 60 70 80 90
LOCAL AMBIENT TEMPERATURE, T (°C)
A
OUTPUT CURRENT, I ( A)
O
Lineage Power 32
Data Sheet
August 24, 2010 36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40 A
QRW010/025/035/040 Series Power Modules; dc-dc Converters
Thermal Considerations (continued)
Figure 59. Output Power Derating for QRW040A0M (Vo
= 1.5V) in Transverse Orientation with No
Baseplate; Airflow direction from VIN (+) to
VIN (–); VIN = 48V.
Figure 60. Output Power Derating for QRW040A0Y (Vo
= 1.8V) in Transverse Orientation with No
Baseplate; Airflow direction from VIN (+) to
VIN (–); VIN = 48V.
Figure 61. Output Power Derating for QRW0350G (Vo =
2.5) in Transverse Orientation with No
Baseplate; Airflow direction from VIN (+) to
VIN (–); VIN = 48V.
Figure 62. Output Power Derating for QRW035A0F (Vo
= 3.3V) in Transverse Orientation with No
Baseplate; Airflow direction from VIN (+) to
VIN (–); VIN = 48V.
Figure 63. Output Power Derating for QRW025A0A (Vo
= 5V) in Transverse Orientation with No
Baseplate; Airflow direction from VIN (+) to
VIN (–); VIN = 48V.
Figure 64. Output Power Derating for QRW010A0B (Vo
= 12V) in Transverse Orientation with No
Baseplate; Airflow direction from VIN (+) to
VIN (–); VIN = 48V.
40
35
30
25
20
15
10
5
0
20 30 40 50 60 70 80 90
LOCAL AMBIENT TEMPERATURE, T
(
°C
)
A
OUTPUT CURRENT, I (A)
O
40
35
30
25
20
15
10
5
0
20 30 40 50 60 70 80 90
LOCAL AMBIENT TEMPERATURE
,
T
(
°C
)
A
O
U
T
P
U
T
C
U
R
R
EN
T
, I (A)
O
40
35
30
25
20
15
10
5
0
20 30 40 50 60 70 80 90
LOCAL AMBIENT TEMPERATURE, T (°C)
A
OUTPUT CURRENT, I (A)
O
Lineage Power 33
Data Sheet
August 24, 2010 36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40 A
QRW010/025/035/040 Series Power Modules; dc-dc Converters
Outline Diagram
Dimensions are in millimeters and (inches)
Tolerences: x.x mm 0.5 mm (x.xx in. 0.02 in.)
x.xx mm 0.25 mm (x.xxx in. 0.010 in.)
1-0454
*Top Side label includes Lineage name, product designation, and data code.
†Optional Features, Pin is not present unless one of these options is specified.
Top View
Side View
Bottom View
Lineage Power 34
Data Sheet
August 24, 2010 36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40 A
QRW010/025/035/040 Series Power Modules; dc-dc Converters
Recommended Hole Pattern
Dimensions are in millimeters and (inches).
Name Pin No. Function
Vi(+) 1 Positive input voltage
N/
A
2
ON/OFF 3 Remote On/Off signal
CASE* 4 Connected to base plate
Vi(-) 5 Negative input voltage
Vo(-) 6 Negative output voltage
-SENSE 7 Negative remote sense
TRIM 8 Output voltage trim
+SENSE 9 Positive remote sense
Vo(+) 10 Positive output voltage
* CASE pin only available on -H option modules.
Lineage Power 35
Data Sheet
August 24, 2010 36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40 A
QRW010/025/035/040 Series Power Modules; dc-dc Converters
Through-Hole Lead-Free Soldering Infor-
mation
The RoHS-compliant through-hole products use the SAC
(Sn/Ag/Cu) Pb-free solder and RoHS-compliant components.
They are designed to be processed through single or dual
wave soldering machines. The pins have an RoHS-compli-
ant finish that is compatible with both Pb and Pb-free wave
soldering processes. A maximum preheat rate of 3°C/s is
suggested. The wave preheat process should be such that
the temperature of the power module board is kept below
210°C. For Pb solder, the recommended pot temperature is
260°C, while the Pb-free solder pot is 270°C max. Not all
RoHS-compliant through-hole products can be processed
with paste-through-hole Pb or Pb-free reflow process. If addi-
tional information is needed, please consult with your
Lineage Power System representative for more details.
Post Solder Cleaning and Drying Considerations
Post solder cleaning is usually the final circuit-board
assembly process prior to electrical board testing. The result
of inadequate cleaning and drying can affect both the
reliability of a power module and the testability of the finished
circuit-board assembly. For guidance on appropriate
soldering, cleaning and drying procedures, refer to Lineage
Power Board Mounted Power Modules: Soldering and
Cleaning Application Note (AP01-056EPS).
Data Sheet
August 24, 2010 QRW010/025/035/040 Series Power Modules; dc-dc Converters
36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40
A
Lineage Power 36
Ordering Information
Please contact your Lin ea ge Po wer Sales R epres entative for pricing , avai l abil ity and optional features.
Table 1. Product Codes
Input Voltage Output
Voltage Output
Current Efficiency Connector Type Product Codes Comcodes
48V (36-75Vdc) 12V 10A 91% Through hole QRW010A0B1 108967167
48V (36-75Vdc) 12V 10A 91% Through hole QRW010A0B41 108983032
48V (36-75Vdc) 12V 10A 91% Through hole QRW010A0B1Z CC109102992
48V (36-75Vdc) 12V 10A 91% Through hole QRW010A0B41-HZ CC109143228
48V (36-75Vdc) 5.0V 25A 92% Through hole QRW025A0A1 108965500
48V (36-75Vdc) 5.0V 25A 92% Through hole QRW025A0A41 108969288
48V (36-75Vdc) 5.0V 25A 92% Through hole QRW025A0A1Z CC109101474
48V (36-75Vdc) 5.0V 25A 92% Through hole QRW025A0A6Z CC109142675
48V (36-75Vdc) 5.0V 25A 92% Through hole QRW025A0A41Z CC109127214
48V (36-75Vdc) 5.0V 25A 92% Through hole QRW025A0A641Z CC109143211
48V (36-75Vdc) 5.0V 25A 92% Through hole QRW025A0A41-H 108982810
48V (36-75Vdc) 5.0V 25A 92% Through hole QRW025A0A71-H 108987264
48V (36-75Vdc) 5.0V 25A 92% Through hole QRW025A0A1-HZ CC109120755
48V (36-75Vdc) 5.0V 25A 92% Through hole QRW025A0A741-HZ CC109114204
48V (36-75Vdc) 3.3V 35A 91% Through hole QRW035A0F1 108965518
48V (36-75Vdc) 3.3V 35A 91% Through hole QRW035A0F1Z 108995230
48V (36-75Vdc) 3.3V 35A 91% Through hole QRW035A0F1-H 108967720
48V (36-75Vdc) 3.3V 35A 91% Through hole QRW035A0F1-HZ CC109144440
48V (36-75Vdc) 3.3V 35A 91% Through hole QRW035A0F61 108975491
48V (36-75Vdc) 3.3V 35A 91% Through hole QRW035A0F41Z CC109107612
48V (36-75Vdc) 3.3V 35A 91% Through hole QRW035A0F641Z CC109138970
48V (36-75Vdc) 3.3V 35A 91% Through hole QRW035A0F841-H 108981283
48V (36-75Vdc) 3.3V 35A 91% Through hole QRW035A0F741-HZ CC109114212
48V (36-75Vdc) 2.5V 35A 90% Through hole QRW035A0G1 108965526
48V (36-75Vdc) 2.5V 35A 90% Through hole QRW035A0G1-H 108968546
48V (36-75Vdc) 1.8V 40A 87% Through hole QRW040A0Y41 108969247
48V (36-75Vdc) 1.5V 40A 86% Through hole QRW040A0M1 108965534
Data Sheet
August 24, 2010 QRW010/025/035/040 Series Power Modules; dc-dc Converters
36 Vdc - 75 Vdc Input, 1.0 to 12 Vdc Output; 10 A to 40
A
Document Name: DS03-113 ver.4.4
PDF name: QRW035_Series.pdf
World Wide Headqua rters
Lineage Power Corpo ration
601 Shiloh Road, Plano, TX 75074, USA
+1-800-526-7819
(Outside U.S.A.: +1-972-244-9428)
www.lineagepower.com
e-mail: techsupport1@lineagepo wer.com
Asia- Pacific Headquarters
Tel: +65 6593 7211
Europe, M iddle-Ea st and Africa Hea dquart ers
Tel : +49 89 87 8067- 280
India Headquarters
Tel : +91 80 28 411633
Lineage Power reserves the right to make changes to the product(s) or information contained herein without notice. No liability is assumed as a result of their use or
a
pplication. No rights under any patent accompany the sale of any such product(s) or information.
Lineage Power DC-DC products are protecte d under various patents. Information on these patents is available at www.lineagepower.com/patents.
©
2009 Linea
g
e Power Cor
p
oration
,
(
Plano
,
Texas
)
All Inter national Ri
g
h ts Re served .
Table 2. Device Options
Characteristic Definition
Form F act or Q Q = Q uart e r B ri ck
Fam i l y Desi gnator R Fam i l y Designator
Input Vol tage W W = Wi de Range, 36V-75V
Output Current 035A0 035A 0 = 035. 0 Amps Maxim um Ou t put Current
BB = 12V no m inal
AA = 5.0V nom i nal
FF = 3. 3V nomi nal
GG = 2.5V nom inal
YY = 1.8V nom i nal
MM = 1. 5V nom i nal
P P = 1.2V nom i nal
S S = 1.0V nom i nal
Om it = Default Pi n Length shown i n M echanical O ut l i ne F i gures
8 8 = P i n Length: 2. 79 m m ± 0. 25m m , (0.110 i n. ± 0. 010 i n.)
7 7 = Cas e P i n (onl y avai l abl e with H opti on )
6 6 = P i n Length: 3. 68 m m ± 0. 25m m , (0.145 i n. ± 0. 010 i n.)
Om it = Lat ching M ode
4 4 = Auto-res tart fol lowi ng shut down (Overc u rrent /O vervol tage)
Om it = P osit ive Logi c
1 1 = Negat i ve Logi c
Om it = S ta ndard open F rame M odu l e
H H = Heat pl ate, for us e wi t h hea t sinks or col d-wal l s
Cus tom e r S peci fic XY XY = Custo m er S pecific Modi fied Code, O m i t for S tandard Code
Om it = RoHS 5/ 6, Lead Based S ol der Us ed
Z Z = RoHS 6/6 Compl i ant, Le ad free
Out put V oltage
Ratings
Charact er and Posit ion
Options
P i n L ength
A ction foll owi ng
P rot ect i ve S hut down
On/ O ff Logic
Mechanical F eatures
RoHS