Ordering number:ENN784E NPN Epitaxial Planar Silicon Transistor 2SD1145 High-Current Driver Applications Applications Package Dimensions * Relay drivers, hammer drivers, lamp drivers, strobe DC-DC converters, motor drivers. unit:mm 2006B [2SD1145] Features 6.0 5.0 4.7 8.5 * Low saturation voltage. * Large current capacity and wide ASO. 14.0 6.0 3.0 0.5 0.6 0.5 0.5 1 : Emitter 2 : Collector 3 : Base SANYO :MP 1 2 3 Specifications 1.45 1.45 Absolute Maximum Ratings at Ta = 25C Parameter Symbol Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Conditions Ratings Unit VCBO VCEO 60 V 20 V VEBO IC 6 V 5 A Collector Current (Pulse) ICP Collector Dissipation PC Junction Temperature Tj Storage Temperature Tstg 100ms, single pulse 8 A 0.9 W 150 C -55 to +150 C Electrical Characteristics at Ta = 25C Parameter Symbol Ratings Conditions min typ max Unit Collector Cutoff Current ICBO VCB=50V, IE=0 1.0 A Emitter Cutoff Current IEBO VEB=5V, IC=0 1.0 A hFE1 VCE=2V, IC=0.5A VCE=2V, IC=3A (Pulse) DC Current Gain hFE2 Gain-Bandwidth Product fT Output Capacitance Base-to-Emitter Saturation Voltage 120 VCB=10V, f=1MHz VCE(sat) VBE(sat) * : The 2SD1145 is classified by 0.5A hFE as follows : 560* 75 VCE=10V, IC=50mA Cob Collector-to-Emitter Saturation Voltage 100* MHz 45 IC=3A, IB=60mA (Pulse) IC=3A, IB=60mA (Pulse) Rank E F G hFE 100 to 200 160 to 320 280 to 560 pF 0.5 V 1.5 V Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 31005TN (PC)/21599TH (KT)/2090MO/5257KI/3095KI, 6212KI, ki No.784-1/3 2SD1145 IC -- VCE 5 m 40mA 60 Collector Current, IC - A 4 20mA Collector Current, IC - A A 50m A A 40m 3 15mA 2 10mA 5mA 1 IB=0 0 0 IC -- VCE 5 30mA 1 2 3 15mA 10mA 2 5mA 1 5 IB=0 0 0.2 0.4 0.6 0.8 1.0 Collector-to-Emitter Voltage, VCE - V ITR09962 IC -- VBE 5 20mA 3 0 4 Collector-to-Emitter Voltage, VCE - V 30mA 4 hFE -- IC 1000 VCE=2V (Pulse) ITR09963 VCE=2V (Pulse) 7 5 DC Current Gain, hFE 25C 3 25C Ta=75C 3 2 --25C 2 --25C C 100 Ta=7 5 Collector Current, IC - A 4 7 5 3 1 2 10 0 0 0.4 0.8 1.2 1.6 2.0 Base-to-Emitter Voltage, VBE - V 3 5 0.1 2 3 5 2 1.0 3 7 5 3 2 100 7 5 3 5 10 ITR09965 Cob -- VCB 2 f=1MHz VCE=10V (Pulse) Output Capacitance, Cob - pF Gain-Bandwidth Product, fT - MHz 2 0.01 Collector Current, IC - A f T -- IC 1000 100 7 5 3 2 2 10 10 2 3 5 7 100 2 3 5 Collector Current, IC - mA 10 1.0 7 1000 ITR09966 3 2 C 25 7 5 C Ta=75 3 --25C 2 10 5 7 2 10 3 5 7 100 ITR09967 VBE(sat) -- IC IC / IB=50 (Pulse) 7 Base-to-Emitter Saturation Voltage, VBE (sat) - V 5 100 3 10 IC / IB=50 (Pulse) 7 2 Collector-to-Base Voltage, VCB - V VCE(sat) -- IC 1000 Collector-to-Emitter Saturation Voltage, VCE (sat) - mV 5 ITR09964 5 3 2 25C 1.0 Ta=75C 7 5 --25C 3 2 0.1 5 7 0.01 2 3 5 7 0.1 2 3 5 7 1.0 Collector Current, IC - A 2 3 5 7 10 ITR09968 5 7 0.01 2 3 5 7 0.1 2 3 5 7 1.0 Collector Current, IC - A 2 3 5 7 10 ITR09969 No.784-2/3 2SD1145 ASO 2 Collector Dissipation, PC - mW 5 ICP=8A IC=5A 0m 10 3 lse pu s( 2 DC 1.0 7 ) Collector Current, IC - A 10 7 op era tio 5 n 3 2 0.1 7 5 Ta=25C 3 0.1 2 PC -- Ta 1000 800 600 400 200 0 3 5 7 1.0 2 3 5 7 10 Collector-to-Emitter Voltage, VCE - V 2 3 ITR09970 0 20 40 60 80 100 120 140 Ambient Temperature, Ta - C 160 ITR09971 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of March, 2005. Specifications and information herein are subject to change without notice. PS No.784-3/3