MSO/DS2000A Series Digital Oscilloscope Bandwidth up to 300MHz, standard with 50 input Lower noise floor, Wider vertical range: 500uV/div ~ 10V/div Max. Sample Rate: Analog channel up to 2G Sa/s ,Digital channel up to 1G Sa/s(MSO) Memory Depth :Analog channel up to14Mpts /56Mpts(Opt.),Digital channel up to 14Mpts/28Mpts(Opt.) Innovative "UltraVision" technology Waveform capture rate up to 50,000 wfs/s Up to 256 Levels intensity grading waveform display Up to 65,000 frames Hardware based Real Time waveform, Record, Replay & Analysis functions(Std.) A variety of trigger and serial bus decoding functions (RS232,I2C,SPI,CAN) Built-in 2 Ch Waveform generator (MSO/DS2000A-S) Complete connectivity: USB Host& Device, LAN(LXI), AUX 8 inch TFT (800x480) WVGA MSO/DS2000A Series is the new mainstream digital scope to meet the customer's applications with its innovative technology. MSO2000A Series has 2+16channels, target for the embedded design and test market with its industry leading specifications, powerful trigger functions and broad analysis capabilities. MSO/DS2000A Series Digital Oscilloscope RUN/STOP/SINGLE Source Waveform record&replay Independent control 16 Digital channels(MSO) for each channel Decoding Product Dimensions: Width X Height X Depth=361.6 mmx179.6 mmx130.8 mm Weight: 3.9 kg 0.5 kg(Without Package) Innovative UltraVision technology(Analog Channel) Deeper Memory Depth (Up to 56Mpts) Higher Waveform Capture Rate (Up to 50,000 wfms/s) Realtime Waveform Record,Replay & Analysis (Up to 65,000 frames) Multi-level Intensity Grading Display (Up to 256 Levels) Models and Key Specifications Model Number DS2072A DS2072A-S DS2102A DS2102A-S DS2202A DS2202A-S DS2302A DS2302A-S MSO2072A MSO2072A-S MSO2102A MSO2102A-S MSO2202A MSO2202A-S MSO2302A MSO2302A-S Analog BW 70 MHz 100MHz 200 MHz 300 MHz Analog Channels 2 Digital Channel(MSO 16 Analog Channel: Max. 2 GSa/s single channel, 1 GSa/s dual channel; Max. Sample rate Digital Channel: 1GSa/s(8 CH), 500MSa/s(16 CH) Analog channel: 7 Mpts(2 CH) / 14 Mpts( 1 CH) std.; 28 Mpts(2 CH) / 56 Mpts( 1 CH) opt.; Max. Memory Depth Digital channel: 7 Mpts(16 CH) / 14 Mpts(8 CH) std.; 14 Mpts(16 CH) / 28 Mpts(8 CH) opt. Max. Waveform Capture rate 50, 000 wfms/s Real Time waveform Record, Up to 65, 000 FramesLA Channel turn off Replay and Analysis function Up to 32, 000 FramesLA Channel turn on Std. Probes RP3300A 350MHz BW Passive Probe:2 sets1 set RPL2316 LA Probe(MSO only) Built-in 2Ch 25MHz Source No Yes No Yes No Yes No Yes 1 RIGOL Wider Vertical range(500uV/div~10V/div ),Lower noise floor, Better for small signal capturing Built-in 2CH Source (MSO/DS2000A-S) UltraVision: Deeper memory(Std.14Mpts,Opt.56Mpts) UltraVision: Up to 50,000 wfms/s Waveform capture rate UltraVision:Realtime waveform record,replay,analysis function (std.) UltraVision: Deeper Memory with Multi-Level intensity grading display(Up to 256 levels) Serial bus Trigger&Decoding functions (RS232,I2C,SPI,CAN) Versatile Trigger Functions(Runt, Nth Edge,Setup/Hold ...) RIGOL 2 MSO2000A Series Mixed Signal Oscilloscope Besides the powerful functions of DS2000A, you could get more from MSO2000A with: 16 Digital channels Sample rate of Digital channel up to 1 GSa/s Memory depth of Digital channel up to 28Mpts Waveform capture rate of Digital channel up to 50,000wfms/s Real Time Waveform Record, Replay and analysis functions, up to 65,000 frames Triggering and Decoding across Analog and Digital channels Easy to be grouped for digital channels Support a variety of logic levels Time correlation display for both analog and digital signals Innovative UltraVision technology(Digital Channel) Deeper Memory Depth( Up to 28Mpts ) Higher Waveform capture rate(Up to 50,000wfms/s) Real Time waveform record & replay(Up to 65,000 frames) Multi-level intensity grading display Mixed Signal Analysis with analog and digital channels Easy to be grouped and labeled for digital channels Serial bus triggering and decoding on digital channels Support a variety of logic levels 3 RIGOL RIGOL Probes supported by MSO/DS2000A Series: RIGOL Passive Probes Model Number Type RIGOL Active & Current Probes Description Model Number Type Description Current Probe BW:DC~300kHz, Max.DC:100A, AC P-P:200A,AC RMS:70A CompatibilityAll RIGOL Scopes. Current Probe BW:DC~1MHz, Max.DC:70A, AC P-P:140A,AC RMS:50A Compatibility All RIGOL Scopes. Current Probe RP1003C BW:DC~50MHz, Max.AC RMS:30A AC Peak:50A(Noncontinuous) Compatibility All RIGOL Scopes. Must order RP1000P Power supply. Current Probe RP1004C BW:DC~100MHz, Max. AC RMS:30A, AC Peak:50A(Noncontinuous) Compatibility All RIGOL Scopes. Must order RP1000P Power supply. Current Probe RP1005C BW:DC~10MHz, Max.150 A rms, 300 A peak (Noncontinuous), 500 A peak (@pulse width <=30 ms) Compatibility All RIGOL Scopes. Must order RP1000P Power supply. Power Supply Power supply for RP1003C,RP1004C,RP1005C, support 4 channels. High Voltage Differential Probe BW:25MHz; Max. Voltage 1400Vpp Compatibility All RIGOL Scopes. High Voltage Differential Probe BW:50MHz; Max. Voltage 7000Vpp Compatibility All RIGOL Scopes. High Voltage Differential Probe BW:100MHz; Max. Voltage 7000Vpp Compatibility: All RIGOL scopes 1X: DC~7MHz High Z 10X:DC~150MHz Probe Compatibility All RIGOL Scopes. RP1001C RP2200 10X:DC~350MHz High Z Compatibility Probe All RIGOL Scopes. RP1002C RP3300A DC~500MHz High Z Compatibility Probe All RIGOL Scopes. RP3500A High Voltage Probe DC~300MHz CATI 2000V(DC+AC), CATII 1500 V(DC+AC) Compatibility All RIGOL Scopes. RP1300H High Voltage Probe RP1010H High Voltage Probe DC~50MHz DC:0~10KV DC,AC:pulse <=20KVp-p, AC:sine wave <=7KVrms Compatibility All RIGOL Scopes. DC~150MHz DC+AC Peak:18KV CAT II AC RMS : 12KVrms CAT II Compatibility All RIGOL Scopes. RP1000P RP1025D RP1018H RP1050D Logic analysis Probe Logic analysis (For MSO4000 & Probe MSO2000A) RPL2316 RP1100D RIGOL 4 Specifications All the specifications are guaranteed except the parameters marked with "Typical" and the oscilloscope needs to operate for more than 30 minutes under the specified operation temperature. Sample Sample Mode Maximum Sample Rate Peak Detect Averaging High Resolution Minimum Detectable Pulse Width Memory Depth Real-time Sample Analog channel: 2 GSa/s (single-channel), 1 GSa/s (dual-channel) Digital channel: 1GSa/s(8CH), 500MSa/s(16CH) Analog channel: 500 ps (single-channel), 1 ns (dual-channel) Digital channel: 1ns(8 CH), 2ns(16CH) After all the channels finish N samples at the same time, N can be 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048, 4096 or 8192. 12 bits of resolution when 5 s/div @ 1 GSa/s (or 10 s/div @ 500 MSa/s). Digital channel: 5 ns Analog channel: single-channel: Auto, 14k pts, 140k pts, 1.4M pts, 14M pts and 56M pts (option) are available dual-channel: Auto, 7k pts, 70k pts, 700k pts, 7M pts and 28M pts (option) are available Digital channel: 7Mpts(16 CH), 14Mpts(8 CH) std.;14Mpts(16 CH), 28Mpts(8 CH) opt. Input Number of Channels Input Coupling Input Impedance Probe Attenuation Coefficient Maximum Input Voltage (1M) MSO2XX2A/2XX2A-S: 2-analog-channel + 16-digital-channel DS2XX2A/2XX2A-S: 2-analog-channel DC, AC or GND Analog channel: (1 M1%) || (16 pF3 pF) or 50 1.5% Digital channel: (101 k1%) || (9 pF1 pF) Analog channel: 0.01X to 1000X, in 1-2-5 step Analog channel: CAT I 300 Vrms, CAT II 100 Vrms, Transient Overvoltage 1000 Vpk with RP2200 10:1 probe: CAT II 300 Vrms with RP3300A 10:1 probe: CAT II 300 Vrms with RP3500A 10:1 probe: CAT II 300 Vrms with RP5600A 10:1 probe: CAT II 300 Vrms Digital channel: CAT I 40 Vrms, transient overvoltage 800 Vpk Horizontal Time Base Scale Channel-to-Channel Skew Time-base Range Maximum Record Length Time Base Accuracy[1] Time Base Drift Delay Range Time Base Mode Number of X-Ys Waveform Capture Rate[2] MSO/DS2302A/2302A-S: 1 ns/div to 1.000 ks/div MSO/DS2202A/2202A-S: 2.000 ns/div to 1.000 ks/div MSO/DS2102A/2102A-S/2072A/2072A-S: 5.000 ns/div to 1.000 ks/div 1 ns (typical), 2 ns (maximum) 1 ns -1000 s 14 Mpts per channel 25 ppm 5 ppm/year negative delay: 1 screen width positive delay: 1 s to 100,000 s Y-T, X-Y, Roll 1 path 50,000 wfms/s (dots display) Vertical Bandwidth (-3dB) Single Bandwidth Vertical Resolution Vertical Scale Offset Range Bandwidth Limit[1] Low Frequency Response (AC Coupling -3dB) Calculated Rise Time[1] DC Gain Accuracy 5 RIGOL MSO/DS2302A/2302A-SDC 300 MHz MSO/DS2202A/2202A-SDC 200 MHz MSO/DS2102A/2102A-SDC 100 MHz MSO/DS2072A/2072A-SDC 70 MHz MSO/DS2302A/2302A-SDC 300 MHz MSO/DS2202A/2202A-SDC 200 MHz MSO/DS2102A/2102A-SDC 100 MHz MSO/DS2072A/2072A-SDC 70 MHz Analog channel: 8 bits Digital channel: 1 bit 500 V/div to 1 V/div50 500 V/div to 10 V/div1 M 500 V /div to 50 mV/div2 V 51 mV/div to 200 mV/div10 V 205 mV/div to 2 V/div50 V 2.05 V/div to 10 V/div100 V MSO/DS2302A/2302A-S/2202A/2202A-S : 20 MHz/100 MHz MSO/DS2102A/2102A-S/2072A/2072A-S : 20 MHz 5 Hz (on BNC) MSO/DS2302A/2302A-S1.2ns MSO/DS2202A/2202A-S1.8 ns MSO/DS2102A/2102A-S3.5 ns MSO/DS2072A/2072A-S5 ns 2% full scale DC Offset Accuracy Channel to Channel Isolation 0.1 div 2 mV 1% offset value DC to maximum bandwidth: >40 dB Vertical (Digital Channel) Threshold LevelType Threshold range Threshold accuracy Dynamic range Min Voltage Swing Input Impedance Probe Loading Vertical resolution 1 group with 8 channels adjustable threshold TTL (1.4 V) 5.0 V CMOS (+2.5 V), 3.3 V CMOS (+1.65 V) 2.5 V CMOS (+1.25 V), 1.8 V CMOS (+0.9 V) ECL (-1.3 V) PECL (+3.7 V) LVDS (+1.2 V) 0V User 20.0 V, in 10 mV step (100 mV + 3% of threshold setting) 10 V + threshold 500 mVpp //101 K 8 pF 1 bit Trigger Trigger Level Range Trigger Mode Holdoff Range High Frequency Rejection[1] Low Frequency Rejection[1] Trigger Sensitivity Edge Trigger Internal 5 div from center of the screen EXT 4 V Auto, Normal, Single 100 ns to 10 s 75 kHz 75 kHz 1 div (below 10 mV or noise rejection is enabled) 0.3 div (above 10 mV and noise rejection is disabled) Edge Type Rising, Falling, Rising/Falling Pulse Condition Pulse Width Range Positive Pulse Width (greater than, lower than, within specific interval) Negative Pulse Width (greater than, lower than, within specific interval) 2 ns to 4 s Pulse Condition Pulse Polarity Pulse Range None, >, <, <> Positive, Negative 2 ns to 4 s Windows Type Trigger Position Windows Time Rising, Falling, Rising/Falling Enter, Exit, Time 16 ns to 4 s Edge Type Idle Time Number of Edges Rising, Falling 16 ns to 4 s 1 to 65535 Slope Condition Positive Slope (greater than, lower than, within specific interval) Negative Slope (greater than, lower than, within specific interval) 10 ns to 1 s Pulse Trigger Runt Trigger Windows Trigger (Option) Nth Edge Trigger (Option) Slope Trigger Time Setting Video Trigger (HDTV Option) Signal Standard Pattern Trigger NTSC, PAL/SECAM, 480P, 576P (option), 720P, 1080P and 1080I (option) Pattern Setting H, L, X, Rising Edge, Falling Edge Edge Type Delay Type Delay Time Rising, Falling >, <, <>, >< 2 ns to 4 s Edge Type Timeout time Rising, Falling, Rising/Falling 16 ns to 4 s Pattern Setting Trigger Condition H, L, X >, <, <> 2 ns to 4 s Edge Type Data Type Setup Time Hold Time Rising, Falling H, L 2 ns to 1 s 2 ns to 1 s Polarity Trigger Condition Baud Normal, Invert Start, Error, Check Error, Data 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps, User Delay Trigger (Option) TimeOut Trigger (Option) Duration Trigger (Option) Duration Time Setup/Hold Trigger RS232/UART Trigger RIGOL 6 Data Bits 5 bit, 6 bit, 7 bit, 8 bit Trigger Condition Address Bits Address Range Byte Length SPI Trigger Trigger Condition Timeout Value Data Bits Data Setting Start, Restart, Stop, Missing ACK, Address, Data, A&D 7 bit, 8 bit, 10 bit 0 to 127, o to 255, 0 to 1023 1 to 5 Signal Type Trigger Condition Baud Rx, Tx, CAN_H, CAN_L, Differential SOF, EOF, Frame Type, Frame Error 10 kbps, 20 kbps, 33.3 kbps, 50 kbps, 62.5 kbps, 83.3 kbps, 100 kbps, 125 kbps, 250 kbps, 500 kbps, 800 kbps, 1 Mbps, User 5% to 95% Data, Remote, Error, Over Load Bit Fill, Answer Error, Check Error, Format Error, Random Error I2C Trigger CAN Trigger (Option) Sample Point Frame Type Error Type USB Trigger (Option) Signal Speed Trigger condition Timeout 100 ns to 1 s 4 bit to 32 bit H, L, X Low Speed, Full Speed SOP, EOP, RC, Suspend, Exit Suspend Measure Cursor Manual Mode Auto Measurement Number of Measurements Measurement Range Measurement Statistic Frequency Counter Voltage Deviation between Cursors ( V) Time Deviation between Cursors ( T) Reciprocal of T (Hz) (1/ T) Voltage and Time Values of the Waveform Point Allow to display cursors during auto measurement Track Mode Auto Mode Analog channel: Measurements of Maximum, Minimum, Peak-Peak Value, Top Value, Bottom Value, Amplitude, Average, Mean Square Root, Overshoot, Pre-shoot, Area, Period Area, Frequency, Period, Rise Time, Fall Time, Positive Pulse Width, Negative Pulse Width, Positive Duty Cycle, Negative Duty Cycle, Delay 12 , Delay 12 , Phase 12 , Phase 12 Digital channel: Frequency, Period, Positive Pulse Width, Negative Pulse Width, Positive Duty Cycle, Negative Duty Cycle, Delay 12 , Delay 12 , Phase 12 , Phase 12 Display 5 measurements at the same time. Screen Region or Cursor Region Current, Average, Max, Min, Standard Deviation, Number of Measurements Hardware 6 bits frequency counter (channels are selectable) Math Operation Waveform Operation FFT Window FFT Display FFT Vertical Scale Logic Operation Math Function Number of Buses for Decoding Decoding Type A+B, A-B, AxB, A/B, FFT, Editable Advanced Operation, Logic Operation Rectangle, Hanning, Blackman, Hamming Split, Full Screen Vrms, dB AND, OR, NOT, XOR Intg, Diff, Lg, Exp, Sqrt, Sine, Cosine, Tangent 2 Parallel (standard), RS232 (option), I2C (option) , SPI (option), CAN (option) Display Display Type Display Resolution Display Color Persistence Time Display Type Real-time Clock 8.0 inches (203 mm) TFT LCD display 800 Horizontal xRGBx480 Vertical Pixel 160,000 Color (TFT) Min, 50 ms, 100 ms, 200 ms, 500 ms, 1 s, 2 s, 5 s, 10 s, 20 s, Infinite Dots, Vectors Time and Date (user adjustable) Signal Source (MSO2000A-S/DS2000A-S) Channels Sample Rate Vertical Resolution Max. Frequency Standard Waveform Built-in Waveform Sine 7 RIGOL 2 200 MSa/s 14 bits 25 MHz Sine, Square, Pulse, Ramp, Noise, DC Sinc, Exponential Rise, Exponential Fall, ECG, Gauss, Lorentz, Haversine Frequency Range 100 mHz to 1 MHz Flatness 0.5 dB (relative to 1 kHz) Harmonic Distortion -40 dBc Stray(Non-harmonic) -40 dBc Total Harmonic Distortion 1% S/N Ratio 40 dB Square/Pulse Frequency Range Rise/Fall Time Overshoot Duty Cycle Frequency Duty Cycle Resolution Min. Pulse Width Pulse Width Resolution Jitter Frequency Range Linearity Symmetry Bandwidth Frequency Range Frequency Range Waveform Length Internal Storage Location Accuracy Amplitude Resolution Output Range DC Offset Resolution Accuracy Range Modulation Resolution Accuracy AM, FM Ramp Noise Built-in Waveform Arbitrary Waveform Square: 100 mHz to 15 MHz Pulse: 100 mHz to 1 MHz <15 ns <5% Square: 50% Pulse: 10% to 90% (user adjustable) 1% or 10 ns (the larger of the two) 20 ns 10 ns or 5 bits (the larger of the two) 500 ps 100 mHz to 100 kHz 1% 0 to 100% 25 MHz (typical) 100 mHz to 1 MHz 100 mHz to 10 MHz 2 to 16k points 10 100 ppm (lower than 10 kHz) 50 ppm (higher than 10 kHz) 100 mHz or 4 bits, the larger of the two 20 mVpp to 5 Vpp, HighZ 10 mVpp to 2.5 Vpp, 50 100 V or 3 bits, the larger of the two 2% (1 kHz) 2.5 V, HighZ 1.25 V, 50 100 V or 3 bits, the larger of the two Offset setting Value2% I/O Standard Ports Printer Compatibility USB HOST (support USB-GPIB), USB DEVICE, LAN, Aux Output (TrigOut/PassFail) PictBridge General Specifications Probe Compensation Output Output Voltage[1] Frequency[1] About 3 V, peak-peak 1 kHz Power Voltage Power Fuse 100 V to 240 V, 45 Hz to 440 Hz Maximum 50 W 2 A, T Degree, 250 V Temperature Range Operating: 0 to +50 Non-operating: -40 to +70 Fan cooling 0 to +30 : 95 Relative Humidity +30 to +40 : 75 Relative Humidity +40 to +50 : 45 Relative Humidity Operating: under 3,000 meters Non-operating: under 15,000 meters Power Environment Cooling Method Humidity Range Altitude Physical Characteristics [3] Size Weight[4] Calibration Interval WidthxHeightxDepth = 361.6 mmx 179.6 mmx130.8 mm Package Excluded 3.9 kg 0.5 kg Package Included 4.5 kg 0.5 kg The recommended calibration interval is one year. Regulatory Information Electromagnetic Compatibility Safety 2004/108/EC Execution standard EN 61326-1:2006 EN 61326-2-1:2006 UL 61010-1:2004; CAN/CSA-C22.2 NO. 61010-1-2004; EN 61010-1:2001; IEC 61010-1:2001 Note[1]: Typical value. Note[2]: Maximum value. 20ns, single-channel mode, dots display, auto memory depth. Note[3]: Supporting legs and handle folded, knob height included. Note[4]: Standard configuration. RIGOL 8 Ordering Information Model Standard Accessories Optional Accessories Deep Memory Option Advanced trigger functions Decoding Options Description DS2072A70MHz2CH DS2072A-S70MHz2CH + 2 CH Source MSO2072A70MHz2+16 MSO MSO2072A-S70MHz2+16 MSO + 2 CH Source DS2102A100MHz2CH DS2102A-S100MHz2CH + 2 CH Source MSO2102A100MHz2+16 MSO MSO2102A-S100MHz2+16 MSO + 2 CH Source DS2202A200MHz2CH DS2202A-S200MHz2CH + 2 CH Source MSO2202A200MHz2+16 MSO MSO2202A-S200MHz2+16 MSO + 2 CH Source DS2302A300MHz2CH DS2302A-S300MHz2CH + 2 CH Source MSO2302A300MHz2+16 MSO MSO2302A-S300MHz2+16 MSO + 2 CH Source Power Cord conforming to the standard of the country USB Data Cable 2 Passive Probes (350 MHz) 1 Set LA probe(MSO only) Quick Guide Resource CD (User's Guide and Application Software) Rack Mount Kit Analog channel and Digital channel(MSO) memory Depth upgraded upto 24Mpts Windows, Nth Edge,HDTV,Delay, Time Out, Duration, USB RS232,I2C,SPI Decoding Kit CAN Analysis kit(Trigger+Decoding) Order Number DS2072A DS2072A-S MSO2072A MSO2072A-S DS2102A DS2102A-S MSO2102A MSO2102A-S DS2202A DS2202A-S MSO2202A MSO2202A-S DS2302A DS2302A-S MSO2302A MSO2302A-S CB-USBA-USBB-FF-150 RP3300A RPL2316 RM-DS2000A MEM-DS2000A AT-DS2000A SD-DS2000A CAN-DS2000A Warranty Three-year warranty,excluding probes and accessories. Headquarter RIGOL TECHNOLOGIES, INC. No.156,Cai He Village, Sha He Town, Chang Ping District, Beijing, 102206 P.R.China Tel:+86-10-80706688 Fax:+86-10-80705070 Email: support@rigol.com USA RIGOL TECHNOLOGIES USA,INC. 7401 First Place,Suite N Oakwood Village OH 44146,USA Tel/Fax: 440-232-4488x111 Toll free: 877-4-RIGOL-1x111 Email: info@rigol.com Europe RIGOL TECHNOLOGIES EU, GmbH Lindbergh str. 4 82178 Puchheim, Germany Tel: +49(0)89-8941895-0 Email: info-europe@rigol.com RIGOL(R) is the registered trademark of RIGOL Technologies, Inc. Product information in this document subject to update without notice. For the latest information about RIGOL's products, applications and services, please contact local RIGOL office or access RIGOL official website: www.rigol.com V01-14