Copyright © 2001 Panduit Corp. All Rights Reserved.
Product Bulletin
Self-Laminating Labels for Laser
AND Ink Jet Printers
• Same label can be printed on laser or ink jet printer
• White print-on area with clear overlaminate for
permanent protected identification
• Thin film with permanent adhesive
US Letter Sheet Format (8.5" x 11" / 215.9mm x 279.4 mm)
DIN A4 Sheet Format (8.26" x 11.69" / 210 mm x 297 mm)
†Labels available with TIA Specified Colored Print-On Area. To order, insert color designation after ‘Y3” in part number: BLU for blue, BRN for Brown,
GRN for Green, GRY for Gray, ORN for Orange, PUR for Purple, RED for Red, or YEL for Yellow. I.E. order LSJL4-Y3BLU-2.5 for Blue
Print-On Area.
*Order number of labels required in multiples of Std. Pkg. Qty.
Part Number Material
Label Size
A x B x C
In. (mm)
Nominal Cable
O.D. Range
In. (mm)
Typ ic al
Electrical
(THHN)
Typical
UTP
Std.
Pkg.
Qty.*
LJSL1-Y3-5 GMY6
Self-
Laminating
Pol ye st er
0.50 x 0.75 x 0.34 (12.7 x 19.1 x 8.6) 0.11 - 0.13 (2.7 - 3.3) 12 AWG — 5000
LJSL2-Y3-5 0.50 x 1.50 x 0.50 (12.7 x 38.1 x 12.7) 0.16 - 0.32 (4.0 - 8.1) 8-6 AWG 4 Pair 5000
LJSL3-Y3-2.5 1.00 x 0.75 x 0.34 (25.4 x 19.1 x 8.6) 0.11 - 0.13 (2.7 - 3.3) 12 AWG — 2500
LJSL3-Y3-5 5000
LJSL4-Y3-2.5†1.00 x 1.00 x 0.34 (25.4 x 25.4 x 8.6) 0.11 - 0.21 (2.7 - 5.3) 12-10 AWG — 2500
LJSL5-Y3-1 1.00 x 1.33 x 0.47 (25.4 x 33.8 x 11.9) 0.15 - 0.27 (3.8 - 6.8) 10-6 AWG 4 Pair 1000
LJSL5-Y3-2.5†2500
LJSL20-Y3-1 1.00 x 1.33 x 0.50 (25.4 x 33.8 x 12.7) 0.16 - 0.26 (4.0 - 6.7) 8-6 AWG 4 Pair 1000
LJSL6-Y3-1 1.00 x 3.17 x 0.97 (25.4 x 80.5 x 24.6) 0.31 - 0.70 (7.8 - 17.8) 4 AWG-4/0 4-50 Pair 1000
LJSL19-Y3-1 1.00 x 5.45 x 1.00 (25.4 x 138.4 x 25.4) 0.32 - 1.42 (8.1 - 36.0) 4 AWG-
1000 MCM
4-300
Pair
1000
LJSL18-Y3-1 1.88 x 3.17 x 0.97 (47.8 x 80.5 x 24.6) 0.31 - 0.70 (7.8 - 17.8) 4 AWG-4/0 4-50 Pair 1000
LJSL7-Y3-1 2.00 x 1.50 x 0.50 (50.8 x 38.1 x 12.7) 0.16 - 0.32 (4.0 - 8.1) 8-6 AWG 4 Pair 1000
LJSL8-Y3-1 2.00 x 3.17 x 1.00 (50.8 x 80.5 x 25.4) 0.32 - 0.69 (8.1 - 17.5) 4 AWG-4/0 4-50 Pair 1000
Part Number Material
Label Size
A x B x C
In. (mm)
Nominal Cable
O.D. Range
In. (mm)
Typ ic al
Electrical
(THHN)
Typical
UTP
Std.
Pkg.
Qty.*
LJSL9-Y3-2.5†GMY6
Self-
Laminating
Pol ye st er
0.70 x 1.33 x 0.33 (17.8 x 33.8 x 8.4) 0.11 - 0.32 (2.7 - 8.1) 12-6 AWG 4 Pair 2500
LJSL10-Y3-1 0.90 x 2.17 x 0.50 (22.9 x 55.0 x 12.7) 0.16 - 0.53 (4.0 - 13.5) 8 AWG-1/0 4-25 Pair 1000
LJSL21-Y3-1†0.90 x 2.17 x 0.67 (22.9 x 55.0 x 17.0) 0.21 - 0.48 (5.3 - 12.1) 8-1 AWG 4-25 Pair 1000
LJSL11-Y3-1†1.00 x 2.67 x 0.67 (25.4 x 67.8 x 16.9) 0.21 - 0.64 (5.3 - 16.2) 8 AWG-3/0 4-50 Pair 1000
LJSL12-Y3-1 1.20 x 2.67 x 0.83 (30.5 x 67.8 x 21.1) 0.26 - 0.58 (6.6 - 14.9) 6 AWG-2/0 4-25 Pair 1000
LJSL17-Y3-0.5†1.40 x 3.67 x 1.00 (35.6 x 93.1 x 25.4) 0.32 - 0.85 (8.1 - 21.6) 4 AWG-
350 MCM
4-50
Pair
500
LJSL14-Y3-0.5 1.40 x 5.50 x 1.00 (35.6 x 139.7 x 25.4) 0.32 - 1.40 (8.1 - 35.6) 4 AWG-
1000 MCM
4-300
Pair
500
LJSL15-Y3-0.5 1.80 x 5.50 x 1.17 (45.7 x 139.7 x 29.6) 0.37 - 1.38 (9.5 - 35.0) 2 AWG-
1000 MCM
4-300
Pair
500
LJSL21-PO3-1 GMPO6
Polyolefin
0.90 x 2.17 x 0.67 (22.9 x 55.0 x 17.0) 0.21 - 0.48 (5.3 - 12.1) 8-1 AWG 4-25 Pair 1000
A
B
C
This warranty is made in lieu of and excludes all other warranties, expressed or implied. THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR USE
ARE SPECIFICALLY EXCLUDED. Neither seller nor manufacturer shall be liable for any other
injury, loss or damage, whether direct or consequential, arising out of the use of, or the inability to
use, the product.
The information contained in this literature is based on our experience to date and is believed to
be reliable. It is intended as a guide for use by persons having technical skill at their own discre-
tion and risk. We do not guarantee favorable results or assume any liability in connection with its
use. Dimensions contained herein are for reference purposes only. For specific dimensional
requirements consult the factory. This publication is not to be taken as a license to operate under,
or a recommendation to infringe any existing patents. This supersedes and voids all previous lit-
erature, etc.
Our products are warranted to be free from defects in material and workmanship at the time of
sale but our obligation under this warranty is limited to the replacement of any product proved to
be defective within 6 months (for product) or 90 days (for tools) from the date of delivery. Tool
warranty is void if Panduit tools are modified, altered or misused in any way. Use of Panduit tool-
ing with any product other than the specified Panduit products for which the tool was designed,
constitutes misuse. Before using, user shall determine the suitability of the product for his
intended use and user assumes all risk and liability whatsoever in connection therewith.
Contact Heilind Electronics for all of your Panduit needs
at (800)400-7041
ELECTRICAL GROUP
Cross Reference to Other Panduit Part Numbers
The new LJSL series is replacing many older Panduit label parts. Users of JSL, PEL and PLL self-laminating
labels should refer to the chart below to determine the new LJSL part number to order.
Self-Laminating Labels for Laser and Ink Jet Printers
Old Part Number LJSL Part Number
JSL1-Y3-5 LJSL1-Y3-5
JSL2-Y3-5 LJSL2-Y3-5
JSL3-Y3-2.5 LJSL3-Y3-2.5
JSL4-Y3-2.5 LJSL4-Y3-2.5
JSL5-Y3-1 LJSL5-Y3-1
JSL5-Y3-2.5 LJSL5-Y3-2.5
JSL6-Y3-1 LJSL6-Y3-1
JSL7-Y3-1 LJSL7-Y3-1
JSL8-Y3-1 LJSL8-Y3-1
JSL9-Y3-2.5 LJSL9-Y3-2.5
JSL10-Y3-1 LJSL10-Y3-1
JSL11-Y3-1 LJSL11-Y3-1
JSL12-Y3-1 LJSL12-Y3-1
PEL-17-BLU-2.5 LJSL9-Y3BLU-2.5
PEL-17-BRN-2.5 LJSL9-Y3BRN-2.5
PEL-17-GRN-2.5 LJSL9-Y3GRN-2.5
PEL-17-GRY-2.5 LJSL9-Y3GRY-2.5
PEL-17-ORN-2.5 LJSL9-Y3ORN-2.5
PEL-17-PUR-2.5 LJSL9-Y3PUR-2.5
PEL-17-RED-2.5 LJSL9-Y3RED-2.5
PEL-17-Y3-2.5 LJSL9-Y3-2.5
PEL-17-YEL-2.5 LJSL9-Y3YEL-2.5
PEL-18-BLU-1 LJSL21-Y3BLU-1
PEL-18-BRN-1 LJSL21-Y3BRN-1
PEL-18-GRN-1 LJSL21-Y3GRN-1
PEL-18-GRY-1 LJSL21-Y3GRY-1
PEL-18-ORN-1 LJSL21-Y3ORN-1
PEL-18-PO3-1 LJSL21-PO3-1
PEL-18-PUR-1 LJSL21-Y3PUR-1
PEL-18-RED-1 LJSL21-Y3RED-1
PEL-18-Y3-1 LJSL21-Y3-1
PEL-18-YEL-1 LSJL21-Y3YEL-1
PEL-19-BLU-1 LJSL11-Y3BLU-1
PEL-19-BRN-1 LJSL11-Y3BRN-1
PEL-19-GRN-1 LJSL11-Y3GRN-1
PEL-19-GRY-1 LJSL11-Y3GRY-1
PEL-19-ORN-1 LJSL11-Y3ORN-1
PEL-19-PUR-1 LJSL11-Y3PUR-1
PEL-19-RED-1 LJSL11-Y3RED-1
PEL-19-Y3-1 LJSL11-Y3-1
PEL-19-YEL-1 LJSL11-Y3YEL-1
PEL-20-Y3-1 LJSL12-Y3-1
PEL-21-BLU-0.5 LJSL17-Y3BLU-.5
PEL-21-BRN-0.5 LJSL17-Y3BRN-.5
PEL-21-GRN-0.5 LJSL17-Y3GRN-.5
PEL-21-GRY-0.5 LJSL17-Y3GRY-.5
PEL-21-ORN-0.5 LJSL17-Y3ORN-.5
PEL-21-PUR-0.5 LJSL17-Y3PUR-.5
PEL-21-RED-0.5 LJSL17-Y3RED-.5
PEL-21-Y3-0.5 LJSL17-Y3-0.5
PEL-21-YEL-0.5 LJSL17-Y3YEL-.5
PEL-22-Y3-0.5 LJSL14-Y3-0.5
PEL-23-Y3-0.5 LJSL15-Y3-0.5
PEL-30-Y3-1 LJSL10-Y3-1
PLL-3-Y3-5 LJSL1-Y3-5
PLL-10-Y3-2.5 LJSL3-Y3-2.5
Old Part Number LJSL Part Number
PLL-10-Y3-5 LJSL3-Y3-5
PLL-11-Y3-2.5 LJSL4-Y3-2.5
PLL-11-Y3B-2.5 LJSL4-Y3BLU-2.5
PLL-11-Y3BR-2.5 LJSL4-Y3BRN-2.5
PLL-11-Y3G-2.5 LJSL4-Y3GRN-2.5
PLL-11-Y3IG-2.5 LJSL4-Y3GRY-2.5
PLL-11-Y3OR-2.5 LJSL4-Y3ORN-2.5
PLL-11-Y3PR-2.5 LJSL4-Y3-PUR-2.5
PLL-11-Y3-RD-2.5 LJSL4-Y3RED-2.5
PLL-11-Y3Y-2.5 LJSL4-Y3YEL-2.5
PLL-12-Y3-1 LJSL5-Y3-1
PLL-12-Y3-2.5 LJSL5-Y3-2.5
PLL-12-Y3B-2.5 LJSL5-Y3BLU-2.5
PLL-12-Y3BR-2.5 LJSL5-Y3BRN-2.5
PLL-12-Y3G-2.5 LJSL5-Y3GRN-2.5
PLL-12-Y3IG-2.5 LJSL5-Y3GRY-2.5
PLL-12-Y3OR-2.5 LJSL5-Y3ORN-2.5
PLL-12-Y3PR-2.5 LJSL5-Y3PUR-2.5
PLL-12-Y3RD-2.5 LJSL5-Y3RED-2.5
PLL-12-Y3Y-2.5 LJSL5-Y3YEL-2.5
PLL-13-Y3-1 LJSL6-Y3-1
PLL-21-Y3-1 LJSL8-Y3-1
PLL-33-Y3-5 LJSL2-Y3-5
PLL-37-Y3-1 LJSL18-Y3-1
PLL-38-Y3-1 LJSL19-Y3-1
PLL-39-Y3-1 LJSL20-Y3-1
PLL-40-Y3-1 LJSL7-Y3-1
Old Part Number LJSL Part Number
