Series 42 Wedge Lok SERIES 42 WEDGE LOK DSCC 84103 & CID 59590 RECOMMENDED GAP WIDTH PCB + 6.35 (.250) RECOMMENDED TORQUE 80 N-cm (7 in-lbs) WEIGHT .89 g/cm (.080 oz/in) MATERIALS AND FINISH WEDGES Material: Aluminum Alloy 6061-T6 per QQ-A-200/8 Finish: See finish table on opposite page SCREW .09-in. or 2.5-mm hex. socket head cap screw, depending on mounting configuration Material: 300 series stainless steel per QQ-S-763 ASTM A-582 Finish: Passivated per AMS2700 OPTIONAL LOCK AND FLAT WASHER Material: 300 series stainless steel per QQ-S-763 and ASTM A-582 Finish: Passivated per AMS2700 OPTIONAL LOCKNUT Material: Type A286 stainless steel per ASTM AMS 5525 Finish: Silver plate per AMS 2410 80 N-cm (7 in-lbs) nVent.com/SCHROFF1-800-854-7086 SERIES 42 WEDGE LOK Part Number Code example: 42VI-12-LF Series 41 42 VI - 10 - B - LF - LN - S - L Visual Indicator ________________________ VI None ____________________________ Length in 12.7 ) increments ____ 4 [50.8 ___________________________to 24 [304.8 Series 42 WEDGE-LOK Three-piece, 152.4 (6.00) long, with Visual Indicator option, Chem Film finish, standard rivet hole mounting, and Lock and Flat Washer option. CODE -5541, ] ] Finish CC -5541, Black Anodized_________________________________B or select code letter from Finish Table L-46010 Lock Washer and Flat Washer ______________________ LF None ______________________________________ Lock Nut __________________________________________ LN None _________________________________________ 2-56 UNC-2B Tapped Holes_________________________________ S Or select code letter from Mounting Method Table Lock Patch__________________________________________________ L None ________________________________________________ CODE S T nVent may modify standard parts without prior notice to or approval from customers. These modifications may change product appearance, but will not have a detrimental effect on form, fit or function. (c)2018 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.