TQS - COMPANY PROPRIETARY INFORMATION SPEC. NO: DAT.CLY2
REV: B
SPEC TITLE: CLY2 DATASHEET
PAGE 1 OF 9
REVISION HISTORY
REV DATE ECN# DESCRIPTION OF CHANGE Internal Web
Site? External Web
Site?
A 10-16-03 22355 New release of CLY2 datasheet (formerly
DAT.057 rev D) ; also replaced S-PAR &
noise match tables, p. 6 & 7 ; replaced
output charasteristics tables, p. 5 ; by R.
Hamilton.
No Yes
B 12-06-04 27162 Updated to reflect Ver 1.8, March 4, 2004;
revised package name to MW6, p.1; deleted
5V electrical characteristics, p. 7; by M.
Rensfeldt
No Yes
MSW
CONTROLLED DISTRIBUTION: 03
NOTE: UNLESS STAMPED WITH A RED "CONTROLLED " STAMP AND STATION NUMBER, THIS IS AN
UNCONTROLLED COPY AND WILL NOT BE UPDATED CONFIRM THAT IT IS CURRENT BEFORE USING.
CLY2
Datasheet
High-Power Packaged GaAs FET
Description:
The CLY2 is a high-breakdown voltage GaAs
FET designed for PA driver applications in the
400 MHz to 3 GHz frequency range. It is ideal
for portable PA applications in mobile phones
and portable WLAN transceivers due to its
easy matching and excellent linearity. The
CLY2 exhibits +23.5 dBm output power with
+3V Vds at 1.8 GHz with an associated gain
of 14.5 dB. Power added efficiencies to 55%
are achievable.
Features:
For frequencies up to 3 GHz
Wide operating voltage range: 2 to 6 V
POUT 23.5 dBm typical at VD=3V,
f=1.8GHz
High efficiency: better than 55 %
Nfmin 0.79 dB typical at 900 MHz
Low Cost
Applications:
Power Amplifiers for
WLAN transceivers
Driver Amplifiers for
WLAN or mobile
phone basestations
Low Noise Amplifier
for basestations and
antenna amplifiers
Package Outline, MW6:
654
3
2
1
Pin Configuration:
1 & 6: Gate
2 & 5: Source
3 & 4: Drain
For further information, please visit www.triquint.com pg. 2/9
Ver 1.8; March 4th, 2004
CLY2 Datasheet
Maximum Ratings:
Parameter Symbol Values Unit
Drain-source voltage VDS 9 V
Drain-gate voltage VDG 12 V
Gate-source voltage VGS -6 V
Drain current ID 600 mA
Channel temperature TCh 150 °C
Storage temperature Tstg -55...+150 °C
Total power dissipation (Ts < 50 °C) 1) P
tot 900 mW
Thermal Resistance
Channel-soldering point 1) R
thChS 110 K/W
1)Ts: Temperature at soldering point
Electrical Specifications:
(TA = 25°C , unless otherwise specified)
Parameter Symbol min typ max Unit
Drain-source saturation current
VDS = 3 V VGS = 0 V IDSS 300 450 650 mA
Drain-source pinch-off current
VDS = 3 V VGS = -3.8 V ID - 5 50 µA
Gate pinch-off current
VDS = 3 V VGS = -3.8 V IG - 5 20 µA
Pinch-off Voltage
VDS= 3 V ID=50µA VGS(p) -3.8 -2.8 -1.8 V
Small Signal Gain*)
VDS = 5 V ID = 180 mA f = 1.8 GHz
Pin = -5 dBm
G - 15.5 - dB
Small Signal Gain*)
VDS = 3 V ID = 180 mA f = 1.8 GHz
Pin = -5 dBm
G - 14.5 - dB
Output Power
VDS = 3 V ID = 180 mA f = 1.8 GHz
Pin = 10 dBm
Po 22.5 23.5 - dBm
For further information, please visit www.triquint.com pg. 3/9
Ver 1.8; March 4th, 2004
CLY2 Datasheet
Electrical Specifications, Continued:
1dB-Compression Point
VDS = 3 V ID = 180 mA f = 1.8 GHz P1dB - 23.5 - dBm
1dB-Compression Point
VDS = 5 V ID = 180 mA f = 1.8GHz P1dB - 27.0 - dBm
Power Added Efficiency
VDS = 3 V ID = 180 mA f = 1.8 GHz
Pin = 10 dBm
PAE - 55 - %
Noise figure
VDS = 3 V ID = 180 mA f = 1.8GHz NF 1.48 dB
*) Matching conditions for maximum small signal gain (not identical with power matching conditions!)
**) Power matching conditions: f=1.8GHz:
Source Match: Γms: MAG = 0.74, ANG 132°; Load Match: Γml: ;MAG 0.61, ANG -153°
For further information, please visit www.triquint.com pg. 4/9
Ver 1.8; March 4th, 2004
CLY2 Datasheet
Electrical Characteristics, Continued:
Output characteristics:
0.00
0.05
0.10
0.15
0.20
0.25
0.30
0.35
0.40
0.45
0.50
01234567
Drain-Source Voltage [V]
Draincurrent [A]
VG=0 V
VG=-0,5V
VG=-1,0V
VG=-1,5V
VG=-2V
VG=-2,5V
Ptot DC
Compression Power vs. Drain-Source Voltage
f = 1.8GHz; IDS = 0.5 Idss
P1dB
0
5
10
15
20
25
30
35
40
[dBm]
0123456
[V]
Dra in-Source Vol ta ge
η
D
0
10
20
30
40
50
60
70
80
[%]
For further information, please visit www.triquint.com pg. 5/9
Ver 1.8; March 4th, 2004
CLY2 Datasheet
Electrical Characteristics, Continued:
Typical Common Source S-Parameters and noise data
V
DS = 3 V ID = 180 mA Zo = 50
Freq. [GHz] |S11| <S11 |S21| <S21 |S12| <S12 |S22| <S22
100 0.992 -13.3 10.120 170.7 0.008 101.1 0.115 -34.6
200 0.974 -26.4 9.778 162.6 0.014 74.1 0.140 -57.5
300 0.950 -38.6 9.278 154.7 0.021 74.0 0.171 -72.3
400 0.922 -49.5 8.683 147.8 0.025 68.0 0.200 -82.0
500 0.896 -59.1 8.042 141.8 0.031 64.8 0.226 -89.1
600 0.871 -67.1 7.444 137.0 0.033 63.0 0.248 -93.8
700 0.849 -74.0 6.880 132.5 0.036 60.6 0.267 -96.9
800 0.828 -79.9 6.373 129.1 0.038 60.2 0.284 -98.8
900 0.813 -85.0 5.900 125.9 0.039 59.1 0.299 -100.1
1,000 0.800 -89.2 5.485 123.4 0.041 59.5 0.312 -100.4
1,100 0.790 -92.6 5.110 121.3 0.041 59.4 0.323 -100.5
1,200 0.780 -95.5 4.780 119.3 0.043 60.2 0.335 -100.0
1,300 0.773 -97.7 4.498 117.7 0.043 61.6 0.345 -99.3
1,400 0.766 -99.6 4.225 116.2 0.044 62.3 0.354 -98.2
1,500 0.760 -100.9 3.987 115.3 0.045 64.1 0.364 -97.1
1,600 0.754 -102.0 3.769 114.4 0.045 65.9 0.372 -95.7
1,700 0.751 -102.7 3.588 113.6 0.045 67.7 0.380 -94.3
1,800 0.748 -103.3 3.426 112.9 0.046 70.0 0.388 -92.6
1,900 0.743 -103.5 3.268 112.3 0.046 71.8 0.397 -90.9
2,000 0.741 -103.8 3.119 111.7 0.047 74.525 0.404 -89.2
f Fmin Γopt Rn rn
GHz dB MAG ANG
0.9 0.79 0.564 61 13.4 0.267
1.8 1.47 0.585 99 13.6 0.272
Additional S-Parameter and noise data available on data disc!
For further information, please visit www.triquint.com pg. 6/9
Ver 1.8; March 4th, 2004
CLY2 Datasheet
Electrical Characteristics, Continued:
Total Power Dissipation
Ptot = f(Ts)
0
0.2
0.4
0.6
0.8
1.0
[W]
0 50 100 150
Ts
C
O
Permissible Pulse Load
Ptotmax/PtotDC = f(tp)
For further information, please visit www.triquint.com pg. 7/9
Ver 1.8; March 4th, 2004
CLY2 Datasheet
Package Dimensions:
Dim. min. nom. max. Gradient Remark
A 1.1
A1 0.1
A2 1.0
b 0.3
b1 0.6
c 0.08 0.15
D 2.8 3.0
E 1.2 1.4
|e| 0.95
|e1| 1.9
HE 2.6
LE 0.6
a max 10° 1
q 2°...30°
1. MSL Rating: 1/260C
2. Pb Free
For further information, please visit www.triquint.com pg. 8/9
Ver 1.8; March 4th, 2004
CLY2 Datasheet
Package Marking:
Package Orientation on Reel:
Ordering Information:
Type Marking Pin Configuration
. 1 2 3 4 5 6 Package 1)
CLY 2 CY2 G S D D S G MW 6
ESD: Electrostatic discharge sensitive device,
observe handling precautions!
Additional Information
For latest specifications, additional product information, worldwide sales and distribution locations, and information about TriQuint:
Web: www.triquint.com Tel: (503) 615-9000
Email: info_wireless@tqs.com Fax: (503) 615-8902
For technical questions and additional information on specific applications:
Email: info_wireless@tqs.com
The information provided herein is believed to be reliable; TriQuint assumes no liability for inaccuracies or omissions. TriQuint assumes no responsibility for the use of
this information, and all such information shall be entirely at the user's own risk. Prices and specifications are subject to change without notice. No patent rights or
licenses to any of the circuits described herein are implied or granted to any t hird part y.
TriQuint does not authorize or war rant any TriQuint product for use in life-support devices and/or systems.
Copyright © 2004TriQuint Semiconductor, Inc. All rights reserved.
Revision 1.8 March 4, 2004
P 9 of 9 For additional information and latest specifications, see our website: www.triquint.com
This datasheet has been download from:
www.datasheetcatalog.com
Datasheets for electronics components.