High Voltage Current Shunt Monitor AD8212 FEATURES Adjustable gain High common-mode voltage range 7 V to 65 V typical 7 V to >500 V with external pass transistor Current output Integrated 5 V series regulator 8-lead MSOP package Operating temperature range of -40C to +125C FUNCTIONAL BLOCK DIAGRAM VSENSE V+ 1 8 AD8212 APPLICATIONS OUTPUT CURRENT COMPENSATION BIAS CIRCUIT 5 2 3 6 IOUT COM BIAS ALPHA 05942-001 Current shunt measurement Motor controls DC-to-DC converters Power supplies Battery monitoring Remote sensing Figure 1. GENERAL DESCRIPTION The AD8212 is a high common-mode voltage, current shunt monitor. It accurately amplifies a small differential input voltage in the presence of large common-mode voltages up to 65 V (>500 V with an external PNP transistor). The AD8212 is ideal for current monitoring across a shunt resistor in applications controlling loads, such as motors and solenoids. The current output of the device is proportional to the input differential voltage. The user can select an external resistor to set the desired gain. The typical common-mode voltage range of the AD8212 is 7 V to 65 V. Another feature of the AD8212 is high voltage operation, which is achieved by using an external high voltage breakdown PNP transistor. In this configuration, the common-mode range of the AD8212 is equal to the breakdown of the external PNP transistor. Therefore, operation at several hundred volts is easily achieved (see Figure 23). The AD8212 features a patented output base current compensation circuit for high voltage operation mode. This ensures that no base current is lost through the external transistor and excellent output accuracy is maintained regardless of commonmode voltage or temperature. Rev. B Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 www.analog.com Fax: 781.461.3113 (c)2007-2009 Analog Devices, Inc. All rights reserved. AD8212 TABLE OF CONTENTS Features .............................................................................................. 1 Normal Operation (7 V to 65 V Supply (V+) Range) ..............9 Applications ....................................................................................... 1 High Voltage Operation Using an External PNP Transistor 10 Functional Block Diagram .............................................................. 1 Output Current Compensation Circuit................................... 10 General Description ......................................................................... 1 Applications Information .............................................................. 11 Revision History ............................................................................... 2 General High-Side Current Sensing ........................................ 11 Specifications..................................................................................... 3 Motor Control............................................................................. 11 Absolute Maximum Ratings............................................................ 4 500 V Current Monitor ............................................................. 11 ESD Caution .................................................................................. 4 Bidirectional Current Sensing .................................................. 12 Pin Configuration and Function Descriptions ............................. 5 Outline Dimensions ....................................................................... 13 Typical Performance Characteristics ............................................. 6 Ordering Guide .......................................................................... 13 Theory of Operation ........................................................................ 9 REVISION HISTORY 5/09--Rev. A to Rev. B Changes to Ordering Guide .......................................................... 13 11/07--Rev. 0 to Rev. A Increased Operating Temperature Range........................ Universal 5/07--Revision 0: Initial Version Rev. B | Page 2 of 16 AD8212 SPECIFICATIONS VS = 15 V, TOPR = -40C to +125C, TA = 25C, unless otherwise noted. Table 1. Parameter SUPPLY VOLTAGE (V+) SUPPLY CURRENT 2 VOLTAGE OFFSET Offset Voltage (RTI) Over Temperature (RTI) Offset Drift INPUT Input Impedance Differential Common Mode (VCM) Voltage Range Differential VSENSE (Pin 8) Current 3 OUTPUT Transconductance Current Range (IOUT) Gain Error for TOPR Impedance Voltage Range REGULATOR Nominal Value PSRR Bias Current (IBIAS) DYNAMIC RESPONSE Small Signal -3 dB Bandwidth Settling Time ALPHA PIN INPUT CURRENT NOISE 0.1 Hz to 10 Hz, RTI Spectral Density, 1 kHz, RTI TEMPERATURE RANGE For Specified Performance (TOPR) Conditions/Comments No external pass transistor With external PNP transistor 1 (ISUPPLY = IOUT + IBIAS) V+ = 7 V to 65 V High voltage operation, using external PNP Min 7 7 Typ 220 200 TA TOPR TOPR V+ = 7 V to 65 V 2 5 Maximum voltage between V+ and VSENSE V+ = 7 V to 65 V, TOPR 100 Max 65 >500 Unit V V 720 1500 A A 2 3 10 mV mV V/C k M 500 200 1000 7 V V+ 65 V, 0 mV to 500 mV differential input 7 V V+ 65 V, with respect to 500 A full scale 500 1 20 0 7 V V+ 65 V 7 V V+ 65 V TOPR, 7 V V+ 65 V TOPR, high voltage operation 4.80 80 V+ - 5 5.20 185 200 1000 V dB A A 25 kHz kHz kHz s A 1000 500 100 2 1.1 40 -40 1 A/V A % M V 5 200 Gain = 10 Gain = 20 Gain = 50 Within 0.1% of the true output, gain = 20 mV nA V p-p nV/Hz +125 C Range dependent on the VCE breakdown of the transistor. The AD8212 supply current in normal voltage operation (V+ = 7 V to 65 V) is the bias current (IBIAS) added to output current (IOUT). Output current varies upon input differential voltage and can range from 0 A to 500 A. IBIAS in this mode of operation is typically 185 A and 200 A maximum. For high voltage operation mode, refer to the High Voltage Operation Using an External PNP Transistor section. 3 The current of the amplifier into VSENSE (Pin 8) increases when operating in high voltage mode. See the High Voltage Operation Using an External PNP Transistor section for more information. 2 Rev. B | Page 3 of 16 AD8212 ABSOLUTE MAXIMUM RATINGS ESD CAUTION TOPR = -40C to +125C, unless otherwise noted. Table 2. Parameter Supply Voltage Continuous Input Voltage Reverse Supply Voltage Operating Temperature Range Storage Temperature Range Output Short-Circuit Duration Rating 65 V 68 V 0.3 V -40C to +125C -40C to +150C Indefinite Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Rev. B | Page 4 of 16 AD8212 PIN CONFIGURATION AND FUNCTION DESCRIPTIONS AD8212 8 VSENSE 7 NC BIAS 3 NC = NO CONNECT 3 Table 3. Pin Function Descriptions Mnemonic V+ COM BIAS NC IOUT ALPHA NC VSENSE X Coordinate -393 -392 -392 - +386 +386 +386 +386 5 Figure 3. Metallization Diagram Figure 2. Pin Configuration Pin No. 1 2 3 4 5 6 7 8 8 6 05942-002 6 ALPHA TOP VIEW NC 4 (Not to Scale) 5 IOUT 1 2 05942-025 V+ 1 COM 2 Y Coordinate +219 +67 -145 - -82 +23 +118 +210 Description Supply Voltage (Inverting Amplifier Input). Regulator Low Side. Bias Circuit Low Side. No Connect. Output Current. Current Compensation Circuit Input. No Connect. Noninverting Amplifier Input. Rev. B | Page 5 of 16 AD8212 TYPICAL PERFORMANCE CHARACTERISTICS 195 1200 1000 T = +125C 185 180 T = +25C INPUT VOS (V) T = -40C 175 800 600 400 170 200 160 05942-005 165 5 10 15 20 25 30 35 40 45 50 55 60 05942-008 QUIESCENT CURRENT (A) 190 0 -40 65 -20 0 20 SUPPLY VOLTAGE (V) Figure 4. Supply Current vs. Supply (Pin V+) (IOUT = 0 mA) 100 120 5.1 T = -40C T = +25C 5.0 4.9 05942-006 T = +125C 5 10 15 20 25 30 35 40 45 50 55 60 +125C 0.8 0.7 0.6 +25C 0.5 0.4 -40C 0.3 0.2 05942-009 OFFSET VOLTAGE RTI (mV) REGULATOR VOLTAGE (V) 80 1.0 0.9 0.1 0 65 7 12 17 22 SUPPLY VOLTAGE (V) 45 9 40 G = +50 30 G = +20 25 20 G = +10 10 5 42 47 52 57 62 8 7 6 5 4 3 2 1 10k 100k FREQUENCY (Hz) 1M 10M 0 05942-021 0 1k 37 05942-010 OUTPUT CURRENT DRIFT (nA/C) 10 15 32 Figure 8 .Input Offset Voltage vs. Supply (Pin V+) 50 35 27 VOLTAGE SUPPLY (V) Figure 5. Regulator Voltage vs. Supply (Pin V+) GAIN (dB) 60 Figure 7. Input Offset Voltage vs. Temperature 5.2 4.8 40 TEMPERATURE (C) 0 50 100 150 200 250 300 350 400 450 DIFFERENTIAL INPUT VOLTAGE (mV) Figure 6. Gain vs. Frequency Figure 9. Output Current Drift vs. Differential Input Voltage Rev. B | Page 6 of 16 500 AD8212 100 VIN 20mV/DIV V+ = 15V ROUT = 50k 1 G = +10 VOUT 500mV/DIV G = +20 0V 0.1 05942-014 0 10 20 30 40 50 60 70 80 90 100 500 DIFFERENTIAL INPUT VOLTAGE (mV) 5s/DIV 05942-023 0.01 G = +50 Figure 10. Total Output Error Due to Input Offset vs. Differential Input Voltage Figure 13. Step Response (Gain = 50) VIN 20mV/DIV VIN 100mV/DIV V+ = 15V ROUT = 5k V+ = 15V ROUT = 5k VOUT 50mV/DIV VOUT 200mV/DIV 05942-012 05942-015 0V 5s/DIV 5s/DIV Figure 11. Step Response (Gain = 5) Figure 14. Step Response (Gain = 5) VIN 20mV/DIV VIN 100mV/DIV V+ = 15V ROUT = 20k V+ = 15V ROUT = 20k VOUT 1V/DIV VOUT 200mV/DIV 0V 05942-016 0V 05942-013 OUTPUT ERROR (%) 10 5s/DIV 5s/DIV Figure 15. Step Response (Gain = 20) Figure 12. Step Response (Gain = 20) Rev. B | Page 7 of 16 AD8212 5.2 V+ = 15V ROUT = 50k VOUT 2V/DIV 05942-017 0V 5.1 T = -40C T = +25C 5.0 T = +125C 4.9 4.8 100 5s/DIV 200 300 400 500 600 700 800 900 1000 1100 1200 BIAS CURRENT (A) 05942-024 REGULATOR VOLTAGE (V) VIN 100mV/DIV Figure 19. Regulator Voltage High Voltage Mode (IOUT = 0 mA) vs. Bias Current Figure 16. Step Response (Gain = 50) 5.2 REGULATOR VOLTAGE (V) VIN 100mV/DIV V+ = 15V ROUT = 20k VOUT 2V/DIV 5.1 V+ = 300V V+ = 100V 5.0 V+ = 200V 4.9 4.8 -40 2s/DIV 05942-007 05942-018 0V -25 -10 5 20 35 50 65 80 95 110 125 TEMPERATURE (C) Figure 20. Regulator Voltage vs. Temperature (High Voltage Operation) Figure 17. Step Response Falling 550 500 VIN 100mV/DIV V+ OPERATING RANGE (V) 450 V+ = 15V ROUT = 20k VOUT 2V/DIV 350 300 250 200 150 V+ MAXIMUM RANGE V+ MINIMUM RANGE 100 05942-019 50 0 10 2s/DIV 20 30 50 70 100 150 200 250 300 350 400 450 500 RBIAS (k) Figure 18. Step Response Rising Figure 21. Supply Range (V+) vs. Bias Resistor Value (High Voltage Operation) Rev. B | Page 8 of 16 05942-020 0V 400 AD8212 THEORY OF OPERATION BATTERY RSHUNT 1 NORMAL OPERATION (7 V TO 65 V SUPPLY (V+) RANGE) ILOAD 8 AD8212 R1 LOAD In typical applications, the AD8212 measures a small differential input voltage generated by a load current flowing through a shunt resistor. R2 A1 The operational amplifier (A1) is connected across the shunt resistor (RSHUNT) with its inverting input connected to the battery/supply side, and the noninverting input connected to the load side of the system. Amplifier A1 is powered via an internal series regulator (depicted as a Zener diode in Figure 22). This regulator maintains a constant 5 V between the battery/supply terminal of the AD8212 and COM (Pin 2), which represents the lowest common point of the internal circuitry. Q1 BIAS CIRCUIT 5 A load current flowing through the external shunt resistor produces a voltage at the input terminals of the AD8212. Amplifier A1 responds by causing Transistor Q1 to conduct the necessary current through Resistor R1 to equalize the potential at both the inverting and noninverting inputs of Amplifier A1. The current through the emitter of Transistor Q1 (IOUT) is proportional to the input voltage (VSENSE), and, therefore, the load current (ILOAD) through the shunt resistor (RSHUNT). The output current (IOUT) is converted to a voltage by using an external resistor, the value of which is dependent on the input to output gain equation desired in the application. The transfer function for the AD8212 is IOUT = (gm x VSENSE) OUTPUT CURRENT COMPENSATION VOUT 2 3 6 IOUT 05942-003 ROUT Figure 22. Typical Connection (7 V to 65 V Supply (Pin V+) Range) When using the AD8212 as described, the battery/supply voltage in the system must be between 7 V to 65 V. The 7 V minimum supply range is necessary to turn on the internal regulator (shown as a Zener diode in Figure 22). This regulated voltage then remains a constant 5 V, regardless of the supply (V+) voltage. The 65 V maximum limit in this mode of operation is due to the breakdown voltage limitation of the AD8212 process. Typically, a 1% resistor can be used to convert the output current to a voltage. Table 4 provides suggested ROUT values. VSENSE = ILOAD x RSHUNT VOUT = IOUT x ROUT Table 4. Suggested ROUT Values VOUT = (VSENSE x ROUT)/1000 where: gm = 1000 A/V. In normal voltage operation mode, the bias circuit is connected to GND, as shown in Figure 22. In this mode, IBIAS is typically 185 A throughout the 7 V to 65 V (V+) range. Gain (V/V) 1 10 20 50 100 Rev. B | Page 9 of 16 ROUT (k) 1 10 20 49.9 100 AD8212 HIGH VOLTAGE OPERATION USING AN EXTERNAL PNP TRANSISTOR The AD8212 offers features that simplify measuring current in the presence of common-mode voltages greater than 65 V. This is achieved by connecting an external PNP transistor at the output of the AD8212, as shown in Figure 23. The VCE breakdown voltage of this PNP becomes the operating common-mode range of the AD8212. PNP transistors with breakdown voltages exceeding 300 V are inexpensive and readily available in small packages. BATTERY RSHUNT 1 8 AD8212 R2 LOAD R1 In this mode of operation, the supply current (IBIAS) of the AD8212 circuit increases based on the supply range and the RBIAS resistor chosen. For example if V+ = 500 V and RBIAS = 500 k IBIAS = (V+ - 5 V)/RBIAS then, IBIAS = (500 - 5)/500 k = 990 A In high voltage operation, it is recommended that IBIAS remain within 200 A to 1 mA. This ensures that the bias circuit is turned on, allowing the device to function as expected. At the same time, the current through the bias circuit/regulator is limited to 1 mA. Refer to Figure 19 and Figure 21 for IBIAS and V+ information when using the AD8212 in a high voltage configuration. A1 When operating the AD8212, as depicted in Figure 23, Transistor Q2 can be a FET or a bipolar PNP transistor. The latter is much less expensive, however the magnitude of IOUT conducted to the output resistor (ROUT) is reduced by the amount of current lost through the base of the PNP. This leads to an error in the output voltage reading. Q1 OUTPUT CURRENT COMPENSATION BIAS CIRCUIT 5 2 3 The AD8212 includes an integrated patented circuit, which compensates for the output current that is lost through the base of the external PNP transistor. This ensures that the correct transconductance of the amplifier is maintained. The user can opt for an inexpensive bipolar PNP, instead of a FET, while maintaining a comparable level of accuracy. 6 Q2 VOUT RBIAS OUTPUT CURRENT COMPENSATION CIRCUIT 05942-004 ROUT Figure 23. High Voltage Operation Using External PNP The AD8212 features an integrated 5 V series regulator. This regulator ensures that at all times COM (Pin 2), which is the most negative of all the terminals, is always 5 V less than the supply voltage (V+). Assuming a battery voltage (V+) of 100 V, it follows that the voltage at COM (Pin 2) is (V+) - 5 V = 95 V The base emitter junction of Transistor Q2, in addition to the Vbe of one internal transistor, makes the collector of Transistor Q1 approximately equal to 95 V + 2(Vbe(Q2)) = 95 V + 1.2 V = 96.2 V This voltage appears across external Transistor Q2. The voltage across Transistor Q1 is 100 V - 96.2 V = 3.8 V In this manner, Transistor Q2 withstands 95.6 V and the internal Transistor Q1 is only subjected to voltages well below its breakdown capability. The base of the external PNP, Q2, is connected to ALPHA (Pin 6) of the AD8212. The current flowing in this path is mirrored inside the current compensation circuit. This current then flows in Resistor R2, which is the same value as Resistor R1. The voltage created by this current across Resistor R2, displaces the noninverting input of Amplifier A1 by the corresponding voltage. Amplifier A1 responds by driving the base of Transistor Q1 so as to force a similar voltage displacement across Resistor R1, thereby increasing IOUT. Because the current generated by the output compensation circuit is equal to the base current of Transistor Q2, and the resulting displacements across Resistor R1 and Resistor R2 result in equal currents, the increment of current added to the output current is equivalent to the base current of Transistor Q2. Therefore, the integrated output current compensation circuit has corrected IOUT such that no error results from the base current lost at Transistor Q2. This feature of the AD8212 greatly improves IOUT accuracy and allows the user to choose an inexpensive bipolar PNP (with low beta) with which to monitor current in the presence of high voltages (typically several hundred volts). Rev. B | Page 10 of 16 AD8212 APPLICATIONS INFORMATION GENERAL HIGH-SIDE CURRENT SENSING 500 V CURRENT MONITOR The AD8212 output is intended to drive high impedance nodes. Therefore, if interfacing with a converter, it is recommended that the output voltage across ROUT be buffered, so that the gain of the AD8212 is not affected. As noted in the High Voltage Operation Using an External PNP Transistor section, the AD8212 common-mode voltage range is extended by using an external PNP transistor. This mode of operation is achievable with many amplifiers featuring a current output. However, typically an external Zener regulator must be added, along with a FET device, to withstand the common-mode voltage and maintain output current accuracy. ILOAD BATTERY RSHUNT V+ 2 COM VSENSE 8 NC 7 3 BIAS ALPHA 6 4 NC 5 IOUT ADC AD8661 IOUT ROUT 05942-026 1 The AD8212 features an integrated regulator (which acts as a Zener regulator). It offers output current compensation that allows the user to maintain excellent output current accuracy by using any PNP transistor. Reliability is increased due to lower component count. Most importantly, the output current accuracy is high, allowing the user to choose an inexpensive PNP transistor to withstand the increased common-mode voltage. LOAD AD8212 ILOAD NOTES 1. NC = NO CONNECT. 500V RSHUNT MOTOR CONTROL The AD8212 is a practical solution for high-side current sensing in motor control applications. In cases where the shunt resistor is referenced to battery and the current flowing is unidirectional, as shown in Figure 25, the AD8212 monitors the current with no additional supply pin necessary. BATTERY AD8212 IMOTOR 1 V+ 2 COM VSENSE 8 NC 3 BIAS ALPHA 7 6 4 NC 5 IOUT MOTOR VOUT NOTES 1. NC = NO CONNECT. 05942-028 ROUT Figure 25. High-Side Current Sensing for Motor Control Rev. B | Page 11 of 16 AD8212 1 V+ 2 COM VSENSE 8 3 BIAS ALPHA 6 4 NC NC 7 IOUT 5 VOUT ROUT 500k NOTES 1. TRANSISTOR VCE BREAKDOWN VOLTAGE MUST BE 500V. 2. NC = NO CONNECT. 05942-027 Careful calculations must be made when choosing a gain resistor so as not to exceed the input voltage range of the converter. The output of the AD8212 can be as high as (V+) - 5 V. However, the true output maximum voltage is dependent upon the differential input voltage, and the resulting output current across ROUT, which can be as high as 500 A (based on a 500 mV maximum input differential limit). LOAD Figure 24. Normal Voltage Range Operation Figure 26. High Voltage Operation Using External PNP AD8212 BIDIRECTIONAL CURRENT SENSING VOUT1 increases as ILOAD flows through the shunt resistor. VOUT2 increases when ICHARGE flows through the input shunt resistor. The AD8212 is a unidirectional current sensing device. Therefore, in power management applications where both the charge and load currents must be monitored, two devices can be used and connected as shown in Figure 27. In this case, ILOAD ICHARGE V+ VSENSE 8 8 VSENSE AD8212 V+ OUTPUT CURRENT COMPENSATION OUTPUT CURRENT COMPENSATION BIAS CIRCUIT IOUT 5 BIAS CIRCUIT COM 2 1 AD8212 LOAD 1 CHARGE BATTERY RSHUNT BIAS 3 ALPHA 6 ALPHA BIAS 6 IOUT COM 3 2 5 VOUT1 VOUT2 ROUT1 05942-011 ROUT2 Figure 27. Bidirectional Current Sensing Rev. B | Page 12 of 16 AD8212 OUTLINE DIMENSIONS 3.20 3.00 2.80 8 3.20 3.00 2.80 5 1 5.15 4.90 4.65 4 PIN 1 0.65 BSC 0.95 0.85 0.75 1.10 MAX 0.15 0.00 0.38 0.22 0.23 0.08 COPLANARITY 0.10 8 0 0.80 0.60 0.40 SEATING PLANE COMPLIANT TO JEDEC STANDARDS MO-187-AA Figure 28. 8-Lead Mini Small Outline Package [MSOP] (RM-8) Dimensions shown in millimeters ORDERING GUIDE Model AD8212YRMZ 1 AD8212YRMZ-RL1 AD8212YRMZ-R71 AD8212WYRMZ1 AD8212WYRMZ-RL1 AD8212WYRMZ-R71 1 Temperature Range -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C -40C to +125C Package Description 8-Lead MSOP 8-Lead MSOP, 13" Tape and Reel 8-Lead MSOP, 7" Tape and Reel 8-Lead MSOP 8-Lead MSOP, 13" Tape and Reel 8-Lead MSOP, 7" Tape and Reel Z = RoHS Compliant Part. Rev. B | Page 13 of 16 Package Option RM-8 RM-8 RM-8 RM-8 RM-8 RM-8 Branding Y04 Y04 Y04 Y25 Y25 Y25 AD8212 NOTES Rev. B | Page 14 of 16 AD8212 NOTES Rev. B | Page 15 of 16 AD8212 NOTES (c)2007-2009 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D05942-0-5/09(B) Rev. B | Page 16 of 16