Plastic Film Capacitors Stacked Metallized PPS Film Chip Capacitor Type: ECHU(X) Stacked metallized PPS film as dielectric with simple mold-less construction Features * Small in size (minimum size 1.6 mm 0.8 mm) * 85 C, 85 %RH, W.V. 1.0 for 500 hours * For reflow soldering * RoHS directive compliant Recommended Applications * Time-constant * Filtering * Oscillation and resonance Explanation of Part Numbers 1 2 3 4 E C H U Product code Dielectric & construction 5 6 7 8 9 10 11 X Rated voltage Capacitance Cap. Tol. Suffix G 2 % J 5 % 1C 16 VDC 1H 50 VDC Specifications Category temp. range (Including temperature-rise on unit surface) Rated voltage 12 Tape width Reel diameter Tape width 8 mm and diameter 8 mm 5 size o180 mm o330 mm reel is prepared. 12 mm 9 size o330 mm -55 to 125 16 VDC50 VDC (50 VDC: 0.12 F or more: Derating or rated voltage by 1.25 % / at more than 105 ) Capacitance range 0.00010 F to 0.22 F (E12) Capacitance tolerance 2 %(G), 5 %(J) Withstand voltage Between terminals : Rated volt. (VDC)150 % 60 s Dissipation factor (tan ) tan0.6 % (20 , 1 kHz) 16 VDCIR3000 M (20 , 10 VDC, 60 s) 50 VDCIR3000 M (20 , 50 VDC, 60 s) Insulation resistance (IR) Soldering conditions Suffix Reflow soldering : 260 C max. and 95 sec max. at more than 220 C (Temp. at cap. surface) Please consult us for flow soldering In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of "Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage". Construction Dimensions in mm (not to scale) saize code L W H e g K1 1.6 0.8 0.7 0.35 0.4 J1 J2 H1 2.0 2.0 3.2 1.25 1.25 1.6 0.9 1.1 0.9 0.45 0.45 0.65 0.6 0.6 1.0 H2 H3 3.2 3.2 1.6 1.6 1.1 1.5 0.65 0.65 1.0 1.0 G1 G2 G3 3.2 3.2 3.2 2.5 2.5 2.5 1.1 1.5 2.1 0.65 0.65 0.65 1.0 1.0 1.0 E1 E2 4.8 4.8 3.3 3.3 1.5 2.1 0.80 0.80 2.0 2.0 D1 D3 D4 6.0 6.0 6.0 4.1 4.1 4.1 1.9 2.5 2.8 0.80 0.80 0.80 2.0 2.0 2.0 Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. Plastic Film Capacitors Taping Specification for Automatic Mounting Refer to the page of taping specifications Rating, Dimensions & Quantity/Reel Capacitance tolerance : 2 % (G), 5 % (J) Rated volt. 16 VDC Cap. (F) 0.00010 0.00012 0.00015 0.00018 0.00022 0.00027 0.00033 0.00039 0.00047 0.00056 0.00068 0.00082 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 Part No. ECHU1C101X5 ECHU1C121X5 ECHU1C151X5 ECHU1C181X5 ECHU1C221X5 ECHU1C271X5 ECHU1C331X5 ECHU1C391X5 ECHU1C471X5 ECHU1C561X5 ECHU1C681X5 ECHU1C821X5 ECHU1C102X5 ECHU1C122X5 ECHU1C152X5 ECHU1C182X5 ECHU1C222X5 ECHU1C272X5 ECHU1C332X5 ECHU1C392X5 ECHU1C472X5 ECHU1C562X5 ECHU1C682X5 ECHU1C822X5 ECHU1C103X5 ECHU1C123X5 ECHU1C153X5 ECHU1C183X5 ECHU1C223X5 ECHU1C273X5 ECHU1C333X5 ECHU1C393X5 ECHU1C473X5 ECHU1C563X5 ECHU1C683X5 ECHU1C823X5 ECHU1C104X5 Dimensions (mm) L 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 2.0 2.0 2.0 2.0 2.0 2.0 2.0 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 W 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 2.5 2.5 2.5 2.5 H 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.9 0.9 0.9 0.9 0.9 1.1 1.1 0.9 0.9 0.9 0.9 1.1 1.1 1.5 1.5 1.5 1.5 2.1 2.1 Rated volt. 50 VDC Size Code K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 J1 J1 J1 J1 J1 J2 J2 H1 H1 H1 H1 H2 H2 H3 H3 G2 G2 G3 G3 Q'ty Part No. ECHU1H101X5 ECHU1H121X5 ECHU1H151X5 ECHU1H181X5 ECHU1H221X5 ECHU1H271X5 ECHU1H331X5 ECHU1H391X5 4000 ECHU1H471X5 ECHU1H561X5 ECHU1H681X5 ECHU1H821X5 ECHU1H102X5 ECHU1H122X5 ECHU1H152X5 ECHU1H182X5 ECHU1H222X5 ECHU1H272X5 ECHU1H332X5 ECHU1H392X5 ECHU1H472X5 ECHU1H562X5 ECHU1H682X5 ECHU1H822X5 3000 ECHU1H103X5 ECHU1H123X5 ECHU1H153X5 ECHU1H183X5 ECHU1H223X5 ECHU1H273X5 ECHU1H333X5 ECHU1H393X5 ECHU1H473X9 2000 ECHU1H563X9 ECHU1H683X9 ECHU1H823X9 ECHU1H104X9 ECHU1H124X9 ECHU1H154X9 ECHU1H184X9 ECHU1H224X9 Dimensions (mm) L 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 4.8 4.8 4.8 4.8 4.8 6.0 6.0 6.0 6.0 W 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.6 1.6 1.6 1.6 1.6 1.6 1.6 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3.3 3.3 3.3 3.3 3.3 4.1 4.1 4.1 4.1 H 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 1.1 1.1 1.1 1.1 1.5 1.5 1.5 2.1 2.1 1.5 1.5 1.5 2.1 2.1 1.9 1.9 2.5 2.8 Size Code J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 H1 H1 H1 H1 H1 H2 H2 G1 G1 G2 G2 G2 G3 G3 E1 E1 E1 E2 E2 D1 D1 D3 D4 Cap. tol. code Recommended for Land Dimensions (mm) Land dimensions Size Code Reflow soldering A K1 J1,J2 H1,H2,H3 G1,G2,G3 E1,E2 D1,D3,D4 0.6 0.8 1.8 1.8 3.0 4.0 B C 2.0 2.4 3.6 3.6 5.6 7.0 0.7 1.1 1.4 2.3 3.0 3.8 It is not warrantable that you can mount the capacitor without trouble under all the mounting condition when "Recommender for Land dimensions" is adopted. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. Q'ty 3000 2000 3000 2000