1999 Apr 29 79
BC Components Product specification
Metallized polyester film capacitors MKT 365/366/367
MKT RADIAL EPOXY LACQUERED TYPE PITCH 5 mm (kinked, straight and bent back leads)
PITCH 7.5 mm (kinked and straight leads)
Fig.1 Simplified outlines.
handbook, full pagewidth
365 366 367
CBA774
FEATURES
•Low-inductive wound cell of
metallized (PETP) film
•Cell protected by epoxy lacquer
•Radial leads of solder-coated wire
•Resistant to solvents and rinsing
liquids.
APPLICATIONS
•Blocking and coupling
•Bypass and energy reservoir.
DETAIL SPECIFICATION
For more detailed data and test
requirements see
“Type detail
specification HQN-384-02/105”
.
QUICK REFERENCE DATA
DESCRIPTION VALUE
Capacitance range (E12 series) 0.01 to 1.0 µF
Capacitance tolerance ±10%; ±5%
Rated (DC) voltage 63 V; 100 V; 250 V; 400 V
Rated (AC) voltage 40 V; 63 V; 160 V; 220 V
Climatic category 55/100/56
Rated temperature 85 °C
Maximum application temperature 100 °C
Tangent of loss angle at 10 kHz 100 ×10−4
Reference specification IEC 60384-2
Performance grade grade 1 (long life)
1999 Apr 29 80
BC Components Product specification
Metallized polyester film capacitors MKT 365
COMPOSITION OF CATALOGUE NUMBER
TYPE AND PITCHES
365 5.0 mm
TYPE PACKAGING LEAD CONFIGURATION C-TOL 63 V 100 V 250 V 400 V
365
ammopack
kinked leads;
H=16.0 mm; P0=12.7 mm ±10% 75 85 − −
±5% 76 86 − −
bent back kinked leads;
H=16.0 mm; P0=12.7 mm ±10% 15 25 45 55
±5% 16 26 46 56
taped on reel
kinked leads;
H=16.0 mm; P0=12.7 mm ±10% 71 81 − −
±5% 72 82 − −
bent back kinked leads;
H=16.0 mm; P0=12.7 mm ±10% 11 21 41 51
±5% 12 22 42 52
MULTIPLIER
(nF)
0.1 2
13
10 4
100 5
CAPACITANCE
(numerically)
2222 365 XX XX X
Example:
104 =10 ×10 =100 nF
1999 Apr 29 81
BC Components Product specification
Metallized polyester film capacitors MKT 366/367
TYPE PACKAGING LEAD CONFIGURATION C-TOL 63 V 100 V 250 V 400 V
366 loose in box
kinked;
lead length 4.0 mm ±10% 75 85 − −
±5% 76 86 − −
kinked;
lead length 17.0 mm ±10% 71 81 − −
±5% 72 82 − −
367 loose in box
straight;
lead length 4.0 mm ±10% 75 85 − −
±5% 76 86 − −
straight;
lead length 22.0 mm ±10% 71 81 − −
±5% 72 82 − −
Available on request with pitch =7.5 mm 63 V 100 V 250 V 400 V
366 loose in box
kinked;
lead length 4.0 mm ±10% 15 25 45 55
±5% 16 26 46 56
kinked;
lead length 17.0 mm ±10% 11 21 41 51
±5% 12 22 42 52
367 loose in box
straight;
lead length 4.0 mm ±10% 15 25 45 55
±5% 16 26 46 56
straight;
lead length 22.0 mm ±10% 11 21 41 51
±5% 12 22 42 52
2222 36. XX XX X
TYPE AND PITCHES
366 5.0 mm
7.5 mm
367
MULTIPLIER
(nF)
0.1 2
13
10 4
100 5
CAPACITANCE
(numerically)
Example:
104 =10 ×10 =100 nF
1999 Apr 29 82
BC Components Product specification
Metallized polyester film capacitors MKT 365/366/367
MKT 365/366/367 GENERAL DATA PITCH 5 mm (kinked and straight leads)
Specific reference data for the 63 V DC capacitors
Available 63 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
.
2. H =in-tape height; for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE
at 1 kHz at 10 kHz at 100 kHz
Tangent of loss angle:
C≤0.1 µF≤75 ×10−4≤130 ×10−4≤225 ×10−4
0.1 µF<C≤0.47 µF≤75 ×10−4≤130 ×10−4≤300 ×10−4
0.47 µF<C≤1.0 µF≤75 ×10−4≤130 ×10−4−
Rated voltage pulse slope (dU/dt)R at 63 V (DC) 110 V/µs
R between leads, for C ≤0.33 µF at 10 V; 1 minute >15000 MΩ
RC between leads, for C >0.33 µF at 100 V; 1 minute >5000 s
R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding voltage DC (cut off current 10 mA);
rise time 100 V/s 100 V; 1 minute
PACKAGING(1) DIMENSIONS LEAD
CONFIGURATION PITCH
(mm)
FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
C-tol =±10% C-tol =±5%
Ammopack H=16.0 mm; note 2 kinked
5 2222 365 75... 2222 365 76... preferred
Taped on reel 5 2222 365 71... 2222 365 72... on request
Loose in box lt=4.0 +1.0/−0.5 mm 5 2222 366 75... 2222 366 76... on request
lt=17.0 ±4.0 mm 5 2222 366 71... 2222 366 72... on request
Loose in box lt=4.0 +1.0/−0.5 mm straight 5 2222 367 75... 2222 367 76... on request
lt=22.0 ±4.0 mm 5 2222 367 71... 2222 367 72... on request
Fig.4 Outline.
(1) Hole ∅1.0 for dt=0.5 mm.
(2) 0 ≤α<50°.
handbook, full pagewidth
seating plane(1)
lb
P
(2)
∅dt
∅dt
lt
h
CBA775
A
∅1.3
≤1.5
P
l
lt
h
b
α
1999 Apr 29 83
BC Components Product specification
Metallized polyester film capacitors MKT 365/366/367
URdc =63 V; URac =40 V Pitch 5 mm (kinked and straight leads)
Notes
1. Dimensions in brackets for straight leads.
2. The shading indicates preferred types.
C
(µF)
DIMENSIONS(1)
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOGUE NUMBER
AMMOPACK; H =16.0 mm
C-tol =±10% C-tol =±5%
catalogue number(2) last 5 digits(2)
Pitch =5.0 +0.4/−0.2 mm; dt=0.50 ±0.05 mm; A =1.7 ±0.3 mm
0.047
4.0 ×12.5 (7.5) ×7.3 0.3
2222 365 75473 .. 76473
0.056 2222 365 75563 .. 76563
0.068 2222 365 75683 .. 76683
0.082 2222 365 75823 .. 76823
0.1 2222 365 75104 .. 76104
0.12 2222 365 75124 .. 76124
0.15 4.0 ×13.0 (8.0) ×7.3 0.3 2222 365 75154 .. 76154
0.18 4.0 ×13.5 (8.5) ×7.3 0.4 2222 365 75184 .. 76184
0.22 4.2 ×13.5 (8.5) ×7.3 0.4 2222 365 75224 .. 76224
0.27 4.5 ×14.0 (9.0) ×7.3 0.4 2222 365 75274 .. 76274
0.33 4.5 ×14.5 (10.5) ×7.3 0.4 2222 365 75334 .. 76334
0.39 2222 365 75394 .. 76394
0.47 4.5 ×15.5 (11.5) ×7.3 0.4 2222 365 75474 .. 76474
0.56 5.0 ×14.0 (10.0) ×7.3 0.4 2222 365 75564 .. 76564
0.68 5.5 ×14.5 (10.5) ×7.3 0.4 2222 365 75684 .. 76684
0.82 5.5 ×15.0 (11.0) ×7.3 0.5 2222 365 75824 .. 76824
1.0 5.5 ×15.5 (11.5) ×7.3 0.5 2222 365 75105 .. 76105
1999 Apr 29 84
BC Components Product specification
Metallized polyester film capacitors MKT 365/366/367
MKT 365/366/367 GENERAL DATA PITCH 5 mm (bent back leads)
PITCH 7.5 mm (kinked and straight leads)
Specific reference data for the 63 V DC capacitors
Available 63 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
.
2. H =in-tape height; for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE
at 1 kHz at 10 kHz at 100 kHz
Tangent of loss angle:
C≤0.1 µF≤75 ×10−4≤130 ×10−4≤225 ×10−4
0.1 µF<C≤0.47 µF≤75 ×10−4≤130 ×10−4≤300 ×10−4
0.47 µF<C≤1.0 µF≤75 ×10−4≤130 ×10−4−
Rated voltage pulse slope (dU/dt)R at 63 V (DC) 110 V/µs
R between leads, for C ≤0.33 µF at 10 V; 1 minute >15000 MΩ
RC between leads, for C >0.33 µF at 100 V; 1 minute >5000 s
R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA);
rise time 100 V/s 100 V; 1 minute
PACKAGING(1) DIMENSIONS LEAD
CONFIGURATION PITCH
(mm)
FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
C-tol =±10% C-tol =±5%
Ammopack H=16.0 mm; note 2 bent back 5 2222 365 15... 2222 365 16... preferred
Taped on reel 5 2222 365 11... 2222 365 12... on request
Loose in box lt=4.0 +1.0/−0.5 mm kinked 7.5 2222 366 15... 2222 366 16... on request
lt=17.0 ±4.0 mm 7.5 2222 366 11... 2222 366 12... on request
Loose in box lt=4.0 +1.0/−0.5 mm straight 7.5 2222 367 15... 2222 367 16... on request
lt=22.0 ±4.0 mm 7.5 2222 367 11... 2222 367 12... on request
Fig.5 Outline.
(1) Hole ∅1.0 for dt=0.6 mm.
(2) 0 ≤α<50°.
handbook, full pagewidth
CBA948
seating
plane(1)
l
h
lt
A
(2)
l
∅1.3
≤1.5
l
P P
h
lt
A∅dt
b
P∅dt
b
h
lt
α
(2)
α
1999 Apr 29 85
BC Components Product specification
Metallized polyester film capacitors MKT 365/366/367
URdc =63 V; URac =40 V Pitch 5 mm (bent back leads)
Notes
1. The shading indicates preferred types.
2. Pitch =7.5 mm (kinked and straight leads) is available on request; for dimensions and package quantities see
“Type detail specification HQN-384-02/105”
.
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
PACKAGING
AMMOPACK; H =16.0 mm
C-tol =±10% C-tol =±5%
catalogue number(1) last 5 digits(1)
Pitch =5.0 +0.4/−0.2 mm; dt=0.60 ±0.06 mm; A =1.7 ±0.3 mm(2)
0.12
4.0 ×13.5 ×10.0 0.4
2222 365 15124 .. 16124
0.15 2222 365 15154 .. 16154
0.18 2222 365 15184 .. 16184
0.22 2222 365 15224 .. 16224
0.27 4.5 ×14.0 ×10.0 0.5 2222 365 15274 .. 16274
0.33 5.0 ×14.5 ×10.0 0.6 2222 365 15334 .. 16334
0.39 2222 365 15394 .. 16394
0.47
5.5 ×15.0 ×10.0 0.7
2222 365 15474 .. 16474
0.56 2222 365 15564 .. 16564
0.68 2222 365 15684 .. 16684
0.82 2222 365 15824 .. 16824
1.0 2222 365 15105 .. 16105
1999 Apr 29 86
BC Components Product specification
Metallized polyester film capacitors MKT 365/366/367
MKT 365/366/367 GENERAL DATA PITCH 5 mm (kinked and straight leads)
Specific reference data for the 100 V DC capacitors
Available 100 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
.
2. H =in-tape height; for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE
at 1 kHz at 10 kHz at 100 kHz
Tangent of loss angle:
C≤0.1 µF≤75 ×10−4≤130 ×10−4≤225 ×10−4
0.1 µF<C≤0.47 µF≤75 ×10−4≤130 ×10−4≤225 ×10−4
Rated voltage pulse slope (dU/dt)R at 100 V (DC) 110 V/µs
R between leads, for C ≤0.33 µF at 100 V; 1 minute >15000 MΩ
RC between leads, for C >0.33 µF at 100 V; 1 minute >5000 s
R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA);
rise time 100 V/s 160 V; 1 minute
PACKAGING(1) DIMENSIONS LEAD
CONFIGURATION PITCH
(mm)
FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
C-tol =±10% C-tol =±5%
Ammopack H=16.0 mm; note 2 kinked
5 2222 365 85... 2222 365 86... preferred
Taped on reel 5 2222 365 81... 2222 365 82... on request
Loose in box lt=4.0 +1.0/−0.5 mm 5 2222 366 85... 2222 366 86... on request
lt=17.0 ±4.0 mm 5 2222 366 81... 2222 366 82... on request
Loose in box lt=4.0 +1.0/−0.5 mm straight 5 2222 367 85... 2222 367 86... on request
lt=22.0 ±4.0 mm 5 2222 367 81... 2222 367 82... on request
Fig.6 Outline.
(1) Hole ∅1.0 for dt=0.5 mm.
(2) 0 ≤α<50°.
handbook, full pagewidth
seating plane(1)
lb
P
(2)
∅dt
∅dt
lt
h
CBA775
A
∅1.3
≤1.5
P
l
lt
h
b
α
1999 Apr 29 87
BC Components Product specification
Metallized polyester film capacitors MKT 365/366/367
URdc =100 V; URac =63 V Pitch 5 mm (kinked and straight leads)
Notes
1. Dimensions in brackets for straight leads.
2. The shading indicates preferred types.
C
(µF)
DIMENSIONS(1)
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOGUE NUMBER
AMMOPACK; H =16.0 mm
C-tol =±10% C-tol =±5%
catalogue number(2) last 5 digits(2)
Pitch =5.0 +0.4/−0.2 mm; dt=0.50 ±0.05 mm; A =1.7 ±0.3 mm
0.01
3.7 ×12.5 (7.5) ×7.3 0.3
2222 365 85103 .. 86103
0.012 2222 365 85123 .. 86123
0.015 2222 365 85153 .. 86153
0.018 2222 365 85183 .. 86183
0.022 2222 365 85223 .. 86223
0.027 2222 365 85273 .. 86273
0.033 2222 365 85333 .. 86333
0.039 2222 365 85393 .. 86393
0.047 4.0 ×12.5 (7.5) ×7.3 0.3 2222 365 85473 .. 86473
0.056 2222 365 85563 .. 86563
0.068 2222 365 85683 .. 86683
0.082 4.0 ×13.0 (8.0) ×7.3 0.3 2222 365 85823 .. 86823
0.1
4.0 ×13.5 (8.5) ×7.3 0.4
2222 365 85104 .. 86104
0.12 2222 365 85124 .. 86124
0.15 2222 365 85154 .. 86154
0.18 2222 365 85184 .. 86184
0.22 4.2 ×13.5 (8.5) ×7.3 0.4 2222 365 85224 .. 86224
0.27 4.5 ×14.0 (9.0) ×7.3 0.4 2222 365 85274 .. 86274
1999 Apr 29 88
BC Components Product specification
Metallized polyester film capacitors MKT 365/366/367
MKT 365/366/367 GENERAL DATA PITCH 5 mm (bent back leads)
PITCH 7.5 mm (kinked and straight leads)
Specific reference data for the 100 V DC capacitors
Available 100 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
.
2. H =in-tape height; for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE
at 1 kHz at 10 kHz at 100 kHz
Tangent of loss angle:
C≤0.1 µF≤75 ×10−4≤130 ×10−4≤225 ×10−4
0.1 µF<C≤0.47 µF≤75 ×10−4≤130 ×10−4≤225 ×10−4
Rated voltage pulse slope (dU/dt)R at 100 V (DC) 110 V/µs
R between leads, for C ≤0.33 µF at 100 V; 1 minute >15000 MΩ
RC between leads, for C >0.33 µF at 100 V; 1 minute >5000 s
R between interconnecting leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA);
rise time 100 V/s 160 V; 1 minute
PACKAGING(1) DIMENSIONS LEAD
CONFIGURATION PITCH
(mm)
FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
C-tol =±10% C-tol =±5%
Ammopack H=16.0 mm; note 2 bent back 5 2222 365 25... 2222 365 26... preferred
Taped on reel 5 2222 365 21... 2222 365 22... on request
Loose in box lt=4.0 +1.0/−0.5 mm kinked 7.5 2222 366 25... 2222 366 26... on request
lt=17.0 ±4.0 mm 7.5 2222 366 21... 2222 366 22... on request
Loose in box lt=4.0 +1.0/−0.5 mm straight 7.5 2222 367 25... 2222 367 26... on request
lt=22.0 ±4.0 mm 7.5 2222 367 21... 2222 367 22... on request
Fig.7 Outline.
(1) Hole ∅1.0 for dt=0.6 mm.
(2) 0 ≤α<50°.
handbook, full pagewidth
CBA948
seating
plane(1)
l
h
lt
A
(2)
l
∅1.3
≤1.5
l
P P
h
lt
A∅dt
b
P∅dt
b
h
lt
α
(2)
α
1999 Apr 29 89
BC Components Product specification
Metallized polyester film capacitors MKT 365/366/367
URdc =100 V; URac =63 V Pitch 5 mm (bent back leads)
Notes
1. The shading indicates preferred types.
2. Pitch =7.5 mm (kinked and straight leads) is available on request; for dimensions and package quantities see
“Type detail specification HQN-384-02/105”
.
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOGUE NUMBER
AMMOPACK; H =16.0 mm
C-tol =±10% C-tol =±5%
catalogue number(1) last 5 digits(1)
Pitch =5.0 +0.4/−0.2 mm; dt=0.60 ±0.06 mm; A =1.7 ±0.3 mm(2)
0.039
4.0 ×13.5 ×10.0 0.4
2222 365 25393 .. 26393
0.047 2222 365 25473 .. 26473
0.056 2222 365 25563 .. 26563
0.068 2222 365 25683 .. 26683
0.082 2222 365 25823 .. 26823
0.1 2222 365 25104 .. 26104
0.12 4.5 ×14.0 ×10.5 0.5 2222 365 25124 .. 26124
0.15 5.0 ×14.5 ×10.5 0.6 2222 365 25154 .. 26154
0.18 2222 365 25184 .. 26184
0.22 5.5 ×15.0 ×10.5 0.7 2222 365 25224 .. 26224
0.27
6.0 ×15.5 ×10.5 0.7
2222 365 25274 .. 26274
0.33 2222 365 25334 .. 26334
0.39 2222 365 25394 .. 26394
0.47 2222 365 25474 .. 26474
1999 Apr 29 90
BC Components Product specification
Metallized polyester film capacitors MKT 365/366/367
MKT 365/366/367 GENERAL DATA PITCH 5 mm (bent back leads)
PITCH 7.5 mm (kinked and straight leads)
Specific reference data for the 250 V DC capacitors
Available 250 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
.
2. H =in-tape height; for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE
at 1 kHz at 10 kHz at 100 kHz
Tangent of loss angle:
C≤0.1 µF≤75 ×10−4≤130 ×10−4≤225 ×10−4
0.1 µF<C≤0.15 µF≤75 ×10−4≤120 ×10−4≤225 ×10−4
Rated voltage pulse slope (dU/dt)R at 250 V (DC) 70 V/µs
R between leads, for C ≤0.33 µF at 100 V; 1 minute >30000 MΩ
R between interconnected leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA);
rise time 100 V/s 400 V; 1 minute
PACKAGING(1) DIMENSIONS LEAD
CONFIGURATION PITCH
(mm)
FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
C-tol =±10% C-tol =±5%
Ammopack H=16.0 mm; note 2 bent back 5 2222 365 45... 2222 365 46... preferred
Taped on reel 5 2222 365 41... 2222 365 42... on request
Loose in box lt=4.0 +1.0/−0.5 mm kinked 7.5 2222 366 45... 2222 366 46... on request
lt=17.0 ±4.0 mm 7.5 2222 366 41... 2222 366 42... on request
Loose in box lt=4.0 +1.0/−0.5 mm straight 7.5 2222 367 45... 2222 367 46... on request
lt=22.0 ±4.0 mm 7.5 2222 367 41... 2222 367 42... on request
Fig.8 Outline.
(1) Hole ∅1.0 for dt=0.6 mm.
(2) 0 ≤α<50°.
handbook, full pagewidth
CBA948
seating
plane(1)
l
h
lt
A
(2)
l
∅1.3
≤1.5
l
P P
h
lt
A∅dt
b
P∅dt
b
h
lt
α
(2)
α
1999 Apr 29 91
BC Components Product specification
Metallized polyester film capacitors MKT 365/366/367
URdc =250 V; URac =160 V Pitch 5 mm (bent back leads)
Notes
1. The shading indicates preferred types.
2. Pitch =7.5 mm (kinked and straight leads) is available on request; for dimensions and package quantities see
“Type detail specification HQN-384-02/105”
.
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOGUE NUMBER
AMMOPACK; H =16.0 mm
C-tol =±10% C-tol =±5%
catalogue number(1) last 5 digits(1)
Pitch =5.0 +0.4/−0.2 mm; dt=0.60 ±0.06 mm; A =1.7 ±0.3 mm(2)
0.018
4.0 ×13.5 ×10.0 0.4
2222 365 45183 .. 46183
0.022 2222 365 45223 .. 46223
0.027 2222 365 45273 .. 46273
0.033 2222 365 45333 .. 46333
0.039 2222 365 45393 .. 46393
0.047 2222 365 45473 .. 46473
0.056 2222 365 45563 .. 46563
0.068 4.5 ×13.0 ×10.0 0.5 2222 365 45683 .. 46683
0.082 2222 365 45823 .. 46823
0.1 5.0 ×13.5 ×10.0 0.6 2222 365 45104 .. 46104
0.12 5.5 ×14.0 ×10.0 0.6 2222 365 45124 .. 46124
0.15 5.5 ×15.5 ×10.0 0.7 2222 365 45154 .. 46154
1999 Apr 29 92
BC Components Product specification
Metallized polyester film capacitors MKT 365/366/367
MKT 365/366/367 GENERAL DATA PITCH 5 mm (bent back leads)
PITCH 7.5 mm (kinked and straight leads)
Specific reference data for the 400 V DC capacitors
Available 400 V DC versions
Notes
1. For SPQ refer to this handbook, chapter
“Packaging information”
.
2. H =in-tape height; for detailed specifications refer to this handbook, chapter
“Packaging information”
.
DESCRIPTION VALUE
at 1 kHz at 10 kHz at 100 kHz
Tangent of loss angle:
C≤0.056 µF≤75 ×10−4≤120 ×10−4≤200 ×10−4
C≤0.1 µF≤75 ×10−4≤130 ×10−4≤225 ×10−4
Rated voltage pulse slope (dU/dt)R at 400 V (DC) 110 V/µs
R between leads, for C ≤0.33 µF at 100 V; 1 minute >30000 MΩ
R between interconnected leads and casing; 100 V; 1 minute >30000 MΩ
Withstanding (DC) voltage (cut off current 10 mA);
rise time 100 V/s 640 V; 1 minute
PACKAGING(1) DIMENSIONS LEAD
CONFIGURATION PITCH
(mm)
FIRST 9 DIGITS OF
CATALOGUE NUMBER ORDERING
C-tol =±10% C-tol =±5%
Ammopack H=16.0 mm; note 2 bent back 5 2222 365 55... 2222 365 56... preferred
Taped on reel 5 2222 365 51... 2222 365 52... on request
Loose in box lt=4.0 +1.0/−0.5 mm kinked 7.5 2222 366 55... 2222 366 56... on request
lt=17.0 ±4.0 mm 7.5 2222 366 51... 2222 366 52... on request
Loose in box lt=4.0 +1.0/−0.5 mm straight 7.5 2222 367 55... 2222 367 56... on request
lt=22.0 ±4.0 mm 7.5 2222 367 51... 2222 367 52... on request
Fig.9 Outline.
(1) Hole ∅1.0 for dt=0.6 mm.
(2) 0 ≤α<50°.
handbook, full pagewidth
CBA948
seating
plane(1)
l
h
lt
A
(2)
l
∅1.3
≤1.5
l
P P
h
lt
A∅dt
b
P∅dt
b
h
lt
α
(2)
α
1999 Apr 29 93
BC Components Product specification
Metallized polyester film capacitors MKT 365/366/367
URdc =400 V; URac =220 V Pitch 5 mm (bent back leads)
Notes
1. The shading indicates preferred types.
2. Pitch =7.5 mm (kinked and straight leads) is available on request; for dimensions and package quantities see
“Type detail specification HQN-384-02/105”
.
C
(µF)
DIMENSIONS
bmax ×hmax ×lmax
(mm)
MASS
(g)
CATALOGUE NUMBER
AMMOPACK; H =16.0 mm
C-tol =±10% C-tol =±5%
catalogue number(1) last 5 digits(1)
Pitch =5.0 +0.4/−0.2 mm; dt=0.60 ±0.06 mm; A =1.7 ±0.3 mm(2)
0.0033
4.0 ×13.5 ×10.0 0.4
2222 365 55332 .. 56332
0.0039 2222 365 55392 .. 56392
0.0047 2222 365 55472 .. 56472
0.0056 2222 365 55562 .. 56562
0.0068 2222 365 55682 .. 56682
0.0082 2222 365 55822 .. 56822
0.01 2222 365 55103 .. 56103
0.012 2222 365 55123 .. 56123
0.015 2222 365 55153 .. 56153
0.018 4.5 ×13.0 ×10.0 0.6 2222 365 55183 .. 56183
0.022 5.0 ×13.5 ×10.0 0.7 2222 365 55223 .. 56223
0.027 4.0 ×12.5 ×10.0 0.4 2222 365 55273 .. 56273
0.033 4.5 ×13.0 ×10.0 0.5 2222 365 55333 .. 56333
0.039 5.0 ×13.5 ×10.0 0.5 2222 365 55393 .. 56393
0.047 5.0 ×13.5 ×10.0 0.6 2222 365 55473 .. 56473
0.056 5.5 ×14.0 ×10.0 0.7 2222 365 55563 .. 56563
1999 Apr 29 94
BC Components Product specification
Metallized polyester film capacitors MKT 365/366/367
CONSTRUCTION
Description
•Low-inductive wound cell of metallized polyethylene
terephthalate film
•Protected by a hard, water repellent, solvent resistant
epoxy lacquer
•Radial leads, solder coated:
– Copper clad steel wire for pitch =5 mm (kinked and
straight leads)
– Copper wire for pitch =5 mm (bent back leads) and
pitch =7.5 mm (kinked and straight leads).
Fig.10 Construction.
handbook, halfpage
connecting wire
metallized polyester film
metal spray layer
CBA073
Mounting
NORMAL USE
The capacitors are designed for mounting on
printed-circuit boards. The capacitors packed in bandoliers
are designed for mounting on printed-circuit boards by
means of automatic insertion machines.
For detailed tape specifications refer to this handbook,
chapter
“Packaging information”
.
SPECIFIED METHOD OF MOUNTING TO WITHSTAND VIBRATION
AND SHOCK
In order to withstand vibration and shock tests, it must be
ensured that the underside of the kinks are in good contact
with the printed-circuit board:
•For pitches ≤15 mm the capacitors shall be
mechanically fixed by the leads.
•For larger pitches the capacitors shall be mounted in the
same way and the body clamped.
Storage temperature
•Storage temperature: Tstg =−25 to +40 °C with RH
maximum 80% without condensation.
RATINGS AND CHARACTERISTICS REFERENCE
CONDITIONS
Unless otherwise specified all electrical values apply at an
ambient free air temperature of 23 ±1°C, an atmospheric
pressure of 86 to 106 kPa and a relative humidity of
50 ±2%.
For reference testing, a conditioning period shall be
applied over 96 ±4 hours by heating the products in a
circulating air oven at the rated temperature and a relative
humidity not exceeding 20%.
1999 Apr 29 95
BC Components Product specification
Metallized polyester film capacitors MKT 365/366/367
CHARACTERISTICS
Capacitance
Fig.11 Capacitance change as a function of frequency: typical curve.
handbook, full pagewidth
CBA074
−3
2
102103104105
−2
−1
0
f (Hz)
1
∆C
C
(%)
Fig.12 Capacitance change at 1 kHz as a function of ambient free air temperature.
handbook, full pagewidth
CBA919
100−60 −20 6020
4
2
0
−2
−4
−6
6
typical
max.
min.
Tamb (°C)
∆C
C
(%)
1999 Apr 29 96
BC Components Product specification
Metallized polyester film capacitors MKT 365/366/367
Impedance
Maximum DC and AC voltage as a function of temperature
Fig.13 Impedance as a function of frequency: typical curves.
handbook, full pagewidth
CBA076
104105106107108
102
10−3
10−2
10−1
1
10
f (Hz)
Impedance
(Ω)
63V; 100 nF
63V; 1 µF
MKT 365
Fig.14 Multiplying factor for DC and AC voltage as a function of temperature.
handbook, full pagewidth
CBA086
1.2
0
0.8
0.4
1.0
0.6
0.2
factor
−60 −20 8040−40 0 20 60 100
Tamb (°C)
1999 Apr 29 97
BC Components Product specification
Metallized polyester film capacitors MKT 365/366/367
Maximum RMS voltage (sinewave) as a function of frequency
Fig.15 AC voltage (RS value) as a function of frequency at Tamb ≤85 °C for Rdc =63 V.
handbook, full pagewidth
CBA077
MKT 365/366/367
47 nF
100 nF
470 nF
1000 nF
AC voltage
(V)
f (Hz)
102
10 103104105
102
1
10
Fig.16 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤100 °C for URdc =63 V.
handbook, full pagewidth
CBA776
MKT 365/366/367
47 nF
100 nF
470 nF
1000 nF
AC voltage
(V)
f (Hz)
102
10 103104105
102
1
10
1999 Apr 29 98
BC Components Product specification
Metallized polyester film capacitors MKT 365/366/367
Fig.17 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C, for URdc =100 V.
handbook, full pagewidth
CBA078
MKT 365/366/367
470 nF
100 nF
47 nF
10 nF
AC voltage
(V)
f (Hz)
102
10 103104105
102
1
10
Fig.18 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤100 °C for URdc =100 V.
handbook, full pagewidth
CBA777
MKT 365/366/367
470 nF
100 nF
47 nF
10 nF
AC voltage
(V)
f (Hz)
102
10 103104105
102
1
10
1999 Apr 29 99
BC Components Product specification
Metallized polyester film capacitors MKT 365/366/367
Fig.19 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C, for URdc =250 V.
handbook, full pagewidth
CBA079
MKT 365/366/367
47 n F
18 n F
AC voltage
(V)
f (Hz)
102
10 103104105
103
102
1
10
Fig.20 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤100 °C for URdc =250 V.
handbook, full pagewidth
AC voltage
(V)
f (Hz)
102
10 103104105
103
102
1
10
CBA778
47 n F
18 n F
MKT 365/366/367
1999 Apr 29 100
BC Components Product specification
Metallized polyester film capacitors MKT 365/366/367
Maximum RMS current (sinewave) as a function of frequency
The maximum RMS current is defined by .
Uac is the maximum AC voltage depending on the ambient temperature in Figs 15 to 22.
Fig.21 AC voltage (RMS value) as a function of frequency at Tamb ≤85 °C, for URdc =400 V.
handbook, full pagewidth
AC voltage
(V)
f (Hz)
102
10 103104105
103
102
1
10
CBA080
3.3 n F
15 n F
MKT 365/366/367
Fig.22 AC voltage (RMS value) as a function of frequency at 85 °C<Tamb ≤100 °C for URdc =400 V.
handbook, full pagewidth
AC voltage
(V)
f (Hz)
102
10 103104105
103
102
1
10
CBA779
3.3 n F
15 n F
MKT 365/366/367
Iac ωCU
ac
××=
1999 Apr 29 101
BC Components Product specification
Metallized polyester film capacitors MKT 365/366/367
Tangent of loss angle
Insulation resistance
Fig.23 Tangent of loss angle as a function of frequency: typical curve.
handbook, full pagewidth
102103104105
103
10
102
dissipation
factor
(× 10−4)
f (Hz)
CBA087
Fig.24 RC product as a function of ambient free air temperature: typical curve.
CBA088
100−50 0 50
105
102
104
103
RC
(s)
Tamb (°C)
1999 Apr 29 102
BC Components Product specification
Metallized polyester film capacitors MKT 365/366/367
Maximum allowed component temperature rise (∆T) as a function of the ambient temperature (Tamb)
Heat conductivity (G) as a function of pitch and capacitor body thickness in mW/°C
Table 1 Heat conductivity
Power dissipation and maximum component temperature rise
The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a
function of the free air ambient temperature.
Power dissipation can be calculated in accordance with chapter
“Introduction”
, section
“Maximum power dissipation”.
The component temperature rise (∆T) can be measured (see section “Measuring the component temperature” for more
details) or calculated by :
•∆T=component temperature rise (°C).
•P=power dissipation of the component (mW).
•G=heat conductivity of the component (mW/°C).
bmax
(mm) ORIGINAL PITCH (mm)
5 7.5
3.5 1.5 3.0
4.0 2.0 3.5
4.5 2.5 3.5
5.0 2.5 4.0
5.5 3.0 4.0
6.0 3.5 4.5
6.5 −5.0
Fig.25 Maximum allowed component temperature rise as a function of the ambient temperature.
handbook, full pagewidth
CBA821
20
15
0
−60 −20 80
10
5
40
−40 0 20 60 100
Tamb (°C)
∆T
(°C)
∆TPG⁄=
1999 Apr 29 103
BC Components Product specification
Metallized polyester film capacitors MKT 365/366/367
Measuring the component temperature
A thermocouple must be attached to the capacitor body; see Fig.26.
The temperature is measured in unloaded (Tamb) and maximum loaded
condition (Tc).
The temperature rise is given by .
To avoid radiation or convection, the capacitor should be tested in a wind-free
box.
Fig.26 Mounting the thermocouple.
handbook, halfpage
thermocouple
CBA771
∆TT
c
T
amb
–=
1999 Apr 29 104
BC Components Product specification
Metallized polyester film capacitors MKT 365/366/367
Application note and limiting conditions
These capacitors are not suitable for mains applications as across-the-line capacitors without additional
protection, as described below. These mains applications are strictly regulated by safety standards and
therefore electromagnetic interference suppression capacitors conforming to the standards must be used.
To select the capacitor for a certain application, the following conditions must be checked:
1. The peak voltage (Up) shall not be greater than the rated DC voltage (URdc).
2. The peak-to-peak voltage (Up-p) shall not be greater than the maximum Up-p to avoid the ionisation inception level.
3. The voltage pulse slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and
without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied
by URdc and divided by the applied voltage.
For all other pulses following equation must be fulfilled:
T is the pulse duration.
The rated voltage pulse slope is valid for ambient temperatures up to 85 °C. For higher temperatures a derating factor
of 3% per K shall be applied.
4. The maximum component surface temperature rise must be lower than the limits in 0.
5. Since in circuits used at voltages over 280 V peak-to-peak the risk for an intrinsically active flammability after a
capacitor breakdown (short circuit) increases, it is recommended that the power to the component is limited to
100 times the values mentioned in Table 1.
6. When using these capacitors as across-the-line capacitor in the input filter for mains applications or as series
connected with an impedance to the mains the applicant must guarantee that following conditions are fulfilled in any
case (spikes and surge voltages from the mains included).
VOLTAGE CONDITIONS FOR 6ABOVE
ALLOWED VOLTAGES Tamb ≤85 °C85°C<T
amb ≤100 °C
Maximum continuous RMS voltage URac 0.8 ×URac
Maximum temporary RMS overvoltage (<24 hours) 1.25 ×URac URac
Maximum peak voltage (Vo-p) (<2 s) 1.6 ×URdc 1.3 ×URdc
2dU
dt
--------
2
0
T
∫dt×× URdc dU
dt
--------
rated
×<
1999 Apr 29 105
BC Components Product specification
Metallized polyester film capacitors MKT 365/366/367
Example
C=330 nF - 63 V used for the voltage signal shown in Fig.27.
Up-p =40 V; Up=35 V; T1=100 µs; T2=200 µs.
The ambient temperature is 35 °C.
Checking the conditions:
1. The peak voltage Up=35 V is lower than 63 V (DC).
2. The peak-to-peak voltage 40 V is lower than .
3. The voltage pulse slope dU/dt =40 V/100 µs=0.4 V/µs.
This is lower than 110 V/µs (see specific reference data for each version).
4. The dissipated power is 16.2 mW as calculated with Fourier terms.
The temperature rise for bmax =4.5 mm and pitch =5 mm will be .
This is lower than 15 °C temperature rise at 35 °C; see Fig.25.
5. Not applicable.
6. Not applicable.
2 2 40V (AC)×× 113 Upp–
=
16.2 mW
2.5 mW °C⁄
--------------------------------- 6.5 °C=
Fig.27 Voltage signal.
handbook, full pagewidth
time
voltage
CBA865
T1
T2
Up
Up-p
1999 Apr 29 106
BC Components Product specification
Metallized polyester film capacitors MKT 365/366/367
MARKING
Product marking
COUNTRY OF ORIGIN:BELGIUM
The capacitors are marked on the top with black ink
(see Figs 28 and 29), containing the following information:
1. Rated capacitance code in nF or µF
2. Tolerance on rated capacitance: K =±10%; J =±5%
3. Rated (DC) voltage. Fig.28 Example of marking for capacitors with
pitch =5 mm (kinked and straight leads).
handbook, halfpage
0.047
K 63
CBA091
Fig.29 Example of marking for capacitors with
pitch =5 mm (bent back leads) and
pitch =7.5 mm (kinked and straight leads).
handbook, halfpage
470 K 100
CBA092
COUNTRY OF ORIGIN: PRC (PEOPLE’SREPUBLIC OF CHINA)
The capacitors are marked on the side with black ink
(see Fig.30), containing the following information:
1. Rated capacitance code in nF or µF
2. Tolerance on rated capacitance: K =±10%; J =±5%
3. Rated (DC) voltage.
Fig.30 Example of marking for capacitors with
pitch =5 and 7.5 mm.
handbook, halfpage
CBA465
100n
K100
1999 Apr 29 107
BC Components Product specification
Metallized polyester film capacitors MKT 365/366/367
Package marking
The package containing the capacitors is marked as shown in Fig.31.
handbook, full pagewidth
CCA337
1.
2.
3.
4.
5.
8.
7.
6.
9.
10.
Fig.31 Barcode label.
Barcode label marking
LINE MARKING EXPLANATION
1 Manufacturer's name
2 Country of origin
3 Sub-family
4 Type description
5 Capacitance value in µF, tolerance, voltage
and climatic category
(“IEC 60068-1”)
6 Batchnumber (only for capacitors from PRC)
7•Country of origin: Belgium
Preference origin code: A
Country of origin in code: 170 (Belgium)
Responsible production centre: HQ
Work order: WO
•Country of origin: China
Preference origin code: N
Country of origin in code: 260 (PRC)
Responsible production centre: 07
8 Product type description
9 Quantity and production period, year and week
code
10 Product code (12NC)
Please note:
In due time BC COMPONENTS
will replace PHILIPS COMPONENTS
1999 Apr 29 108
BC Components Product specification
Metallized polyester film capacitors MKT 365/366/367
QUICK REFERENCE TEST REQUIREMENTS (see note 1)
Notes
1. For detailed information, see
“Type detail specification HQN-384-02/105”
.
2. Measuring frequency 100 kHz for C ≤470 nF and 10 kHz for C >470 nF.
TEST PROCEDURE
(quick reference) REQUIREMENTS
Robustness of leads
Tensile strength:
“IEC 60068-2-21”
load 10 N; 10 s
no visible damage
legible marking
∆C/C≤2%
∆tan δ≤30 ×10−4; note 2
Bending:
“IEC 60068-2-21”
load 5 N; 4 ×90°
Resistance to soldering heat:
“IEC 60068-2-20”
solder bath: 260 °C; 10 s
Component solvent resistance isopropyl alcohol; 23 °C; 5 minutes
Robustness of component
Vibration:
“IEC 60068-2-6”
10 to 55 Hz; amplitude 0.75 mm or
acceleration 98 m/s2; 6 hours ∆C/C≤3%
∆tan δ≤30 ×10−4; note 2
Shock:
“IEC 60068-2-27”
half sinewave; 490 m/s2; 11 ms
Climatic sequence
Dry heat:
“IEC 60068-2-2”
16 hours; 100 °C
∆C/C≤5%
∆tan δ≤50 ×10−4; note 2
Rins ≥50% of specified value
Damp heat cyclic, first cycle:
“IEC 60068-2-30”:
Cold:
“IEC 60068-2-1”
2 hours; −55 °C
Damp heat, remaining cycles:
“IEC 60068-2-30”
Other applicable tests
Damp heat steady state:
“IEC 60068-2-3”
56 days; 40 °C; 90 to 95% RH ∆C/C≤5%
∆tan δ≤50 ×10−4; note 2
Rins ≥50% of specified value
Endurance (DC):
“IEC 60384-2”
2000 hours:
1.25 ×URdc; 85 °C
1×URdc; 100 °C
∆C/C≤5%
∆tan δ≤30 ×10−4; note 2
Rins ≥50% of specified value
Heat storage:
“IEC 60384-2”
2000 hours; 100 °C∆C/C≤3%
∆tan δ≤30 ×10−4; note 2
Resistance to soldering heat
with preheating:
“IEC 60384-2”
body temperature: 100 °C;
bath temperature: 260 °C;
dwell time: 5 s
∆C/C≤2% (C ≤10 nF)
∆C/C≤1% (C >10 nF)
∆tan δ≤30 ×10−4; note 2
