BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 MKT RADIAL EPOXY LACQUERED TYPE PITCH 5 mm (kinked, straight and bent back leads) PITCH 7.5 mm (kinked and straight leads) handbook, full pagewidth 365 366 367 CBA774 Fig.1 Simplified outlines. FEATURES * Low-inductive wound cell of metallized (PETP) film * Cell protected by epoxy lacquer * Radial leads of solder-coated wire * Resistant to solvents and rinsing liquids. APPLICATIONS * Blocking and coupling * Bypass and energy reservoir. QUICK REFERENCE DATA DESCRIPTION Capacitance range (E12 series) 0.01 to 1.0 F Capacitance tolerance 10%; 5% Rated (DC) voltage 63 V; 100 V; 250 V; 400 V Rated (AC) voltage 40 V; 63 V; 160 V; 220 V Climatic category 55/100/56 Rated temperature 85 C Maximum application temperature 100 C Tangent of loss angle at 10 kHz 100 x 10-4 Reference specification IEC 60384-2 Performance grade grade 1 (long life) DETAIL SPECIFICATION For more detailed data and test requirements see "Type detail specification HQN-384-02/105". 1999 Apr 29 VALUE 79 BC Components Product specification Metallized polyester film capacitors MKT 365 COMPOSITION OF CATALOGUE NUMBER TYPE AND PITCHES 365 MULTIPLIER (nF) 5.0 mm CAPACITANCE (numerically) 0.1 2 1 3 10 4 100 5 Example: 104 = 10 x 10 = 100 nF 2222 TYPE PACKAGING ammopack 365 taped on reel 1999 Apr 29 365 XX XX X LEAD CONFIGURATION C-TOL 63 V 100 V 250 V 400 V kinked leads; H = 16.0 mm; P0 = 12.7 mm 10% 75 85 - - 5% 76 86 - - bent back kinked leads; H = 16.0 mm; P0 = 12.7 mm 10% 15 25 45 55 5% 16 26 46 56 kinked leads; H = 16.0 mm; P0 = 12.7 mm 10% 71 81 - - 5% 72 82 - - bent back kinked leads; H = 16.0 mm; P0 = 12.7 mm 10% 11 21 41 51 5% 12 22 42 52 80 BC Components Product specification Metallized polyester film capacitors MKT 366/367 TYPE AND PITCHES 366 367 MULTIPLIER (nF) 5.0 mm 7.5 mm 0.1 2 CAPACITANCE 1 3 (numerically) 10 4 100 5 Example: 104 = 10 x 10 = 100 nF 2222 TYPE PACKAGING 36. XX XX X LEAD CONFIGURATION C-TOL 63 V 100 V 250 V 400 V 10% 75 85 - - 5% 76 86 - - kinked; lead length 17.0 mm 10% 71 81 - - 5% 72 82 - - straight; lead length 4.0 mm 10% 75 85 - - 5% 76 86 - - 10% 71 81 - - 5% 72 82 - - 63 V 100 V 250 V 400 V 25 45 55 kinked; lead length 4.0 mm 366 367 loose in box loose in box straight; lead length 22.0 mm Available on request with pitch = 7.5 mm 366 367 1999 Apr 29 kinked; lead length 4.0 mm 10% 15 5% 16 26 46 56 kinked; lead length 17.0 mm 10% 11 21 41 51 5% 12 22 42 52 straight; lead length 4.0 mm 10% 15 25 45 55 5% 16 26 46 56 straight; lead length 22.0 mm 10% 11 21 41 51 5% 12 22 42 52 loose in box loose in box 81 BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 MKT 365/366/367 GENERAL DATA l PITCH 5 mm (kinked and straight leads) b l b 1.5 handbook, full pagewidth h seating plane(1) (2) 1.3 h lt lt P P A CBA775 dt dt (1) Hole 1.0 for dt = 0.5 mm. (2) 0 < 50. Fig.4 Outline. Specific reference data for the 63 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: C 0.1 F 0.1 F < C 0.47 F 0.47 F < C 1.0 F Rated voltage pulse slope (dU/dt)R at 63 V (DC) R between leads, for C 0.33 F at 10 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding voltage DC (cut off current 10 mA); rise time 100 V/s at 1 kHz at 10 kHz at 100 kHz 75 x 10-4 75 x 10-4 75 x 10-4 130 x 10-4 130 x 10-4 130 x 10-4 110 V/s >15000 M >5000 s >30000 M 100 V; 1 minute 225 x 10-4 300 x 10-4 - Available 63 V DC versions PACKAGING(1) Ammopack Taped on reel Loose in box Loose in box DIMENSIONS LEAD PITCH CONFIGURATION (mm) 5 5 5 5 5 5 H = 16.0 mm; note 2 lt = 4.0 +1.0/-0.5 mm lt = 17.0 4.0 mm lt = 4.0 +1.0/-0.5 mm lt = 22.0 4.0 mm kinked straight FIRST 9 DIGITS OF CATALOGUE NUMBER C-tol = 10% C-tol = 5% 2222 365 75... 2222 365 71... 2222 366 75... 2222 366 71... 2222 367 75... 2222 367 71... 2222 365 76... 2222 365 72... 2222 366 76... 2222 366 72... 2222 367 76... 2222 367 72... Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 82 ORDERING preferred on request on request on request on request on request BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 URdc = 63 V; URac = 40 V Pitch 5 mm (kinked and straight leads) CATALOGUE NUMBER C (F) DIMENSIONS(1) bmax x hmax x lmax (mm) AMMOPACK; H = 16.0 mm MASS (g) C-tol = 10% catalogue number(2) C-tol = 5% last 5 digits(2) Pitch = 5.0 +0.4/-0.2 mm; dt = 0.50 0.05 mm; A = 1.7 0.3 mm 0.047 2222 365 75473 .. 76473 0.056 2222 365 75563 .. 76563 0.068 2222 365 75683 .. 76683 2222 365 75823 .. 76823 0.082 4.0 x 12.5 (7.5) x 7.3 0.3 0.1 2222 365 75104 .. 76104 0.12 2222 365 75124 .. 76124 2222 365 75154 .. 76154 0.15 4.0 x 13.0 (8.0) x 7.3 0.3 0.18 4.0 x 13.5 (8.5) x 7.3 0.4 2222 365 75184 .. 76184 0.22 4.2 x 13.5 (8.5) x 7.3 0.4 2222 365 75224 .. 76224 0.27 4.5 x 14.0 (9.0) x 7.3 0.4 2222 365 75274 .. 76274 0.33 4.5 x 14.5 (10.5) x 7.3 0.4 2222 365 75334 .. 76334 2222 365 75394 .. 76394 0.47 4.5 x 15.5 (11.5) x 7.3 0.4 2222 365 75474 .. 76474 0.56 5.0 x 14.0 (10.0) x 7.3 0.4 2222 365 75564 .. 76564 0.68 5.5 x 14.5 (10.5) x 7.3 0.4 2222 365 75684 .. 76684 0.82 5.5 x 15.0 (11.0) x 7.3 0.5 2222 365 75824 .. 76824 1.0 5.5 x 15.5 (11.5) x 7.3 0.5 2222 365 75105 .. 76105 0.39 Notes 1. Dimensions in brackets for straight leads. 2. The shading indicates preferred types. 1999 Apr 29 83 BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 MKT 365/366/367 GENERAL DATA PITCH 5 mm (bent back leads) PITCH 7.5 mm (kinked and straight leads) l l b l b 1.5 handbook, full pagewidth seating plane(1) h h (2) (2) lt P h 1.3 A lt P lt dt A dt P CBA948 (1) Hole 1.0 for dt = 0.6 mm. (2) 0 < 50. Fig.5 Outline. Specific reference data for the 63 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: C 0.1 F 0.1 F < C 0.47 F 0.47 F < C 1.0 F Rated voltage pulse slope (dU/dt)R at 63 V (DC) R between leads, for C 0.33 F at 10 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s at 1 kHz at 10 kHz at 100 kHz 75 x 10-4 75 x 10-4 75 x 10-4 130 x 10-4 130 x 10-4 130 x 10-4 110 V/s >15000 M >5000 s >30000 M 100 V; 1 minute 225 x 10-4 300 x 10-4 - Available 63 V DC versions PACKAGING(1) Ammopack Taped on reel Loose in box Loose in box DIMENSIONS H = 16.0 mm; note 2 lt = 4.0 +1.0/-0.5 mm lt = 17.0 4.0 mm lt = 4.0 +1.0/-0.5 mm lt = 22.0 4.0 mm LEAD PITCH CONFIGURATION (mm) 5 5 7.5 7.5 7.5 7.5 bent back kinked straight FIRST 9 DIGITS OF CATALOGUE NUMBER C-tol = 10% 2222 365 15... 2222 365 11... 2222 366 15... 2222 366 11... 2222 367 15... 2222 367 11... C-tol = 5% 2222 365 16... 2222 365 12... 2222 366 16... 2222 366 12... 2222 367 16... 2222 367 12... Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 84 ORDERING preferred on request on request on request on request on request BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 URdc = 63 V; URac = 40 V Pitch 5 mm (bent back leads) PACKAGING C (F) DIMENSIONS bmax x hmax x lmax (mm) AMMOPACK; H = 16.0 mm MASS (g) C-tol = 10% catalogue number(1) C-tol = 5% last 5 digits(1) Pitch = 5.0 +0.4/-0.2 mm; dt = 0.60 0.06 mm; A = 1.7 0.3 mm(2) 0.12 0.15 0.18 4.0 x 13.5 x 10.0 0.4 0.22 0.27 4.5 x 14.0 x 10.0 0.5 0.33 5.0 x 14.5 x 10.0 0.6 0.39 0.47 0.56 2222 365 15124 .. 16124 2222 365 15154 .. 16154 2222 365 15184 .. 16184 2222 365 15224 .. 16224 2222 365 15274 .. 16274 2222 365 15334 .. 16334 2222 365 15394 .. 16394 2222 365 15474 .. 16474 2222 365 15564 .. 16564 2222 365 15684 .. 16684 0.82 2222 365 15824 .. 16824 1.0 2222 365 15105 .. 16105 0.68 5.5 x 15.0 x 10.0 0.7 Notes 1. The shading indicates preferred types. 2. Pitch = 7.5 mm (kinked and straight leads) is available on request; for dimensions and package quantities see "Type detail specification HQN-384-02/105". 1999 Apr 29 85 BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 MKT 365/366/367 GENERAL DATA l PITCH 5 mm (kinked and straight leads) b l b 1.5 handbook, full pagewidth h seating plane(1) (2) 1.3 h lt lt P P A CBA775 dt dt (1) Hole 1.0 for dt = 0.5 mm. (2) 0 < 50. Fig.6 Outline. Specific reference data for the 100 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: C 0.1 F 0.1 F < C 0.47 F Rated voltage pulse slope (dU/dt)R at 100 V (DC) R between leads, for C 0.33 F at 100 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s at 1 kHz at 10 kHz at 100 kHz 75 x 10-4 75 x 10-4 130 x 10-4 130 x 10-4 110 V/s >15000 M >5000 s >30000 M 160 V; 1 minute 225 x 10-4 225 x 10-4 Available 100 V DC versions PACKAGING(1) Ammopack Taped on reel Loose in box Loose in box DIMENSIONS LEAD PITCH CONFIGURATION (mm) 5 5 5 5 5 5 H = 16.0 mm; note 2 lt = 4.0 +1.0/-0.5 mm lt = 17.0 4.0 mm lt = 4.0 +1.0/-0.5 mm lt = 22.0 4.0 mm kinked straight FIRST 9 DIGITS OF CATALOGUE NUMBER C-tol = 10% C-tol = 5% 2222 365 85... 2222 365 81... 2222 366 85... 2222 366 81... 2222 367 85... 2222 367 81... 2222 365 86... 2222 365 82... 2222 366 86... 2222 366 82... 2222 367 86... 2222 367 82... Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 86 ORDERING preferred on request on request on request on request on request BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 URdc = 100 V; URac = 63 V Pitch 5 mm (kinked and straight leads) CATALOGUE NUMBER C (F) DIMENSIONS(1) bmax x hmax x lmax (mm) AMMOPACK; H = 16.0 mm MASS (g) C-tol = 10% catalogue number(2) C-tol = 5% last 5 digits(2) Pitch = 5.0 +0.4/-0.2 mm; dt = 0.50 0.05 mm; A = 1.7 0.3 mm 0.01 2222 365 85103 .. 86103 0.012 2222 365 85123 .. 86123 0.015 2222 365 85153 .. 86153 2222 365 85183 .. 86183 0.018 0.022 3.7 x 12.5 (7.5) x 7.3 0.3 2222 365 85223 .. 86223 0.027 2222 365 85273 .. 86273 0.033 2222 365 85333 .. 86333 0.039 2222 365 85393 .. 86393 0.047 2222 365 85473 .. 86473 2222 365 85563 .. 86563 2222 365 85683 .. 86683 0.056 4.0 x 12.5 (7.5) x 7.3 0.3 0.068 0.082 4.0 x 13.0 (8.0) x 7.3 0.3 0.1 0.12 0.15 4.0 x 13.5 (8.5) x 7.3 0.4 0.18 2222 365 85823 .. 86823 2222 365 85104 .. 86104 2222 365 85124 .. 86124 2222 365 85154 .. 86154 2222 365 85184 .. 86184 0.22 4.2 x 13.5 (8.5) x 7.3 0.4 2222 365 85224 .. 86224 0.27 4.5 x 14.0 (9.0) x 7.3 0.4 2222 365 85274 .. 86274 Notes 1. Dimensions in brackets for straight leads. 2. The shading indicates preferred types. 1999 Apr 29 87 BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 MKT 365/366/367 GENERAL DATA PITCH 5 mm (bent back leads) PITCH 7.5 mm (kinked and straight leads) l l b l b 1.5 handbook, full pagewidth seating plane(1) h h (2) (2) lt P h 1.3 A lt P lt dt A dt P CBA948 (1) Hole 1.0 for dt = 0.6 mm. (2) 0 < 50. Fig.7 Outline. Specific reference data for the 100 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: C 0.1 F 0.1 F < C 0.47 F Rated voltage pulse slope (dU/dt)R at 100 V (DC) R between leads, for C 0.33 F at 100 V; 1 minute RC between leads, for C > 0.33 F at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s at 1 kHz at 10 kHz at 100 kHz 75 x 10-4 75 x 10-4 130 x 10-4 130 x 10-4 110 V/s >15000 M >5000 s >30000 M 160 V; 1 minute 225 x 10-4 225 x 10-4 Available 100 V DC versions PACKAGING(1) Ammopack Taped on reel Loose in box Loose in box DIMENSIONS H = 16.0 mm; note 2 lt = 4.0 +1.0/-0.5 mm lt = 17.0 4.0 mm lt = 4.0 +1.0/-0.5 mm lt = 22.0 4.0 mm LEAD PITCH CONFIGURATION (mm) 5 5 7.5 7.5 7.5 7.5 bent back kinked straight FIRST 9 DIGITS OF CATALOGUE NUMBER C-tol = 10% C-tol = 5% 2222 365 25... 2222 365 21... 2222 366 25... 2222 366 21... 2222 367 25... 2222 367 21... 2222 365 26... 2222 365 22... 2222 366 26... 2222 366 22... 2222 367 26... 2222 367 22... Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 88 ORDERING preferred on request on request on request on request on request BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 URdc = 100 V; URac = 63 V Pitch 5 mm (bent back leads) CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) AMMOPACK; H = 16.0 mm MASS (g) C-tol = 10% catalogue number(1) C-tol = 5% last 5 digits(1) Pitch = 5.0 +0.4/-0.2 mm; dt = 0.60 0.06 mm; A = 1.7 0.3 mm(2) 0.039 2222 365 25393 .. 26393 0.047 2222 365 25473 .. 26473 2222 365 25563 .. 26563 2222 365 25683 .. 26683 2222 365 25823 .. 26823 0.056 0.068 4.0 x 13.5 x 10.0 0.4 0.082 0.1 0.12 4.5 x 14.0 x 10.5 0.5 0.15 5.0 x 14.5 x 10.5 0.6 5.5 x 15.0 x 10.5 0.7 0.18 0.22 0.27 0.33 0.39 6.0 x 15.5 x 10.5 0.7 0.47 2222 365 25104 .. 26104 2222 365 25124 .. 26124 2222 365 25154 .. 26154 2222 365 25184 .. 26184 2222 365 25224 .. 26224 2222 365 25274 .. 26274 2222 365 25334 .. 26334 2222 365 25394 .. 26394 2222 365 25474 .. 26474 Notes 1. The shading indicates preferred types. 2. Pitch = 7.5 mm (kinked and straight leads) is available on request; for dimensions and package quantities see "Type detail specification HQN-384-02/105". 1999 Apr 29 89 BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 MKT 365/366/367 GENERAL DATA PITCH 5 mm (bent back leads) PITCH 7.5 mm (kinked and straight leads) l l b l b 1.5 handbook, full pagewidth seating plane(1) h h (2) (2) lt P h 1.3 A lt P lt dt A dt P CBA948 (1) Hole 1.0 for dt = 0.6 mm. (2) 0 < 50. Fig.8 Outline. Specific reference data for the 250 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: C 0.1 F 0.1 F < C 0.15 F Rated voltage pulse slope (dU/dt)R at 250 V (DC) R between leads, for C 0.33 F at 100 V; 1 minute R between interconnected leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s at 1 kHz at 10 kHz at 100 kHz 75 x 10-4 75 x 10-4 130 x 10-4 120 x 10-4 70 V/s >30000 M >30000 M 400 V; 1 minute 225 x 10-4 225 x 10-4 Available 250 V DC versions PACKAGING(1) Ammopack Taped on reel Loose in box Loose in box DIMENSIONS H = 16.0 mm; note 2 lt = 4.0 +1.0/-0.5 mm lt = 17.0 4.0 mm lt = 4.0 +1.0/-0.5 mm lt = 22.0 4.0 mm LEAD PITCH CONFIGURATION (mm) 5 5 7.5 7.5 7.5 7.5 bent back kinked straight FIRST 9 DIGITS OF CATALOGUE NUMBER C-tol = 10% C-tol = 5% 2222 365 45... 2222 365 41... 2222 366 45... 2222 366 41... 2222 367 45... 2222 367 41... 2222 365 46... 2222 365 42... 2222 366 46... 2222 366 42... 2222 367 46... 2222 367 42... Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 90 ORDERING preferred on request on request on request on request on request BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 URdc = 250 V; URac = 160 V Pitch 5 mm (bent back leads) CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) AMMOPACK; H = 16.0 mm MASS (g) C-tol = 10% catalogue number(1) C-tol = 5% last 5 digits(1) Pitch = 5.0 +0.4/-0.2 mm; dt = 0.60 0.06 mm; A = 1.7 0.3 mm(2) 0.018 2222 365 45183 .. 46183 0.022 2222 365 45223 .. 46223 2222 365 45273 .. 46273 2222 365 45333 .. 46333 2222 365 45393 .. 46393 0.027 0.033 4.0 x 13.5 x 10.0 0.4 0.039 0.047 2222 365 45473 .. 46473 0.056 2222 365 45563 .. 46563 2222 365 45683 .. 46683 0.068 4.5 x 13.0 x 10.0 0.5 2222 365 45823 .. 46823 0.1 5.0 x 13.5 x 10.0 0.6 2222 365 45104 .. 46104 0.12 5.5 x 14.0 x 10.0 0.6 2222 365 45124 .. 46124 0.15 5.5 x 15.5 x 10.0 0.7 2222 365 45154 .. 46154 0.082 Notes 1. The shading indicates preferred types. 2. Pitch = 7.5 mm (kinked and straight leads) is available on request; for dimensions and package quantities see "Type detail specification HQN-384-02/105". 1999 Apr 29 91 BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 MKT 365/366/367 GENERAL DATA PITCH 5 mm (bent back leads) PITCH 7.5 mm (kinked and straight leads) l l b l b 1.5 handbook, full pagewidth seating plane(1) h h (2) (2) lt P h 1.3 A lt P lt dt A dt P CBA948 (1) Hole 1.0 for dt = 0.6 mm. (2) 0 < 50. Fig.9 Outline. Specific reference data for the 400 V DC capacitors VALUE DESCRIPTION Tangent of loss angle: C 0.056 F C 0.1 F Rated voltage pulse slope (dU/dt)R at 400 V (DC) R between leads, for C 0.33 F at 100 V; 1 minute R between interconnected leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s at 1 kHz at 10 kHz at 100 kHz 75 x 10-4 75 x 10-4 120 x 10-4 130 x 10-4 110 V/s >30000 M >30000 M 640 V; 1 minute 200 x 10-4 225 x 10-4 Available 400 V DC versions PACKAGING(1) Ammopack Taped on reel Loose in box Loose in box DIMENSIONS H = 16.0 mm; note 2 lt = 4.0 +1.0/-0.5 mm lt = 17.0 4.0 mm lt = 4.0 +1.0/-0.5 mm lt = 22.0 4.0 mm LEAD PITCH CONFIGURATION (mm) 5 5 7.5 7.5 7.5 7.5 bent back kinked straight FIRST 9 DIGITS OF CATALOGUE NUMBER C-tol = 10% C-tol = 5% 2222 365 55... 2222 365 51... 2222 366 55... 2222 366 51... 2222 367 55... 2222 367 51... 2222 365 56... 2222 365 52... 2222 366 56... 2222 366 52... 2222 367 56... 2222 367 52... Notes 1. For SPQ refer to this handbook, chapter "Packaging information". 2. H = in-tape height; for detailed specifications refer to this handbook, chapter "Packaging information". 1999 Apr 29 92 ORDERING preferred on request on request on request on request on request BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 URdc = 400 V; URac = 220 V Pitch 5 mm (bent back leads) CATALOGUE NUMBER C (F) DIMENSIONS bmax x hmax x lmax (mm) AMMOPACK; H = 16.0 mm MASS (g) C-tol = 10% catalogue number(1) C-tol = 5% last 5 digits(1) Pitch = 5.0 +0.4/-0.2 mm; dt = 0.60 0.06 mm; A = 1.7 0.3 mm(2) 0.0033 2222 365 55332 .. 56332 0.0039 2222 365 55392 .. 56392 0.0047 2222 365 55472 .. 56472 0.0056 2222 365 55562 .. 56562 2222 365 55682 .. 56682 0.0068 4.0 x 13.5 x 10.0 0.4 0.0082 2222 365 55822 .. 56822 0.01 2222 365 55103 .. 56103 0.012 2222 365 55123 .. 56123 0.015 2222 365 55153 .. 56153 0.018 4.5 x 13.0 x 10.0 0.6 2222 365 55183 .. 56183 0.022 5.0 x 13.5 x 10.0 0.7 2222 365 55223 .. 56223 0.027 4.0 x 12.5 x 10.0 0.4 2222 365 55273 .. 56273 0.033 4.5 x 13.0 x 10.0 0.5 2222 365 55333 .. 56333 0.039 5.0 x 13.5 x 10.0 0.5 2222 365 55393 .. 56393 0.047 5.0 x 13.5 x 10.0 0.6 2222 365 55473 .. 56473 0.056 5.5 x 14.0 x 10.0 0.7 2222 365 55563 .. 56563 Notes 1. The shading indicates preferred types. 2. Pitch = 7.5 mm (kinked and straight leads) is available on request; for dimensions and package quantities see "Type detail specification HQN-384-02/105". 1999 Apr 29 93 BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 CONSTRUCTION Mounting Description NORMAL USE * Low-inductive wound cell of metallized polyethylene terephthalate film The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting on printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to this handbook, chapter "Packaging information". * Protected by a hard, water repellent, solvent resistant epoxy lacquer * Radial leads, solder coated: - Copper clad steel wire for pitch = 5 mm (kinked and straight leads) SPECIFIED METHOD OF MOUNTING TO WITHSTAND VIBRATION - Copper wire for pitch = 5 mm (bent back leads) and pitch = 7.5 mm (kinked and straight leads). AND SHOCK In order to withstand vibration and shock tests, it must be ensured that the underside of the kinks are in good contact with the printed-circuit board: * For pitches 15 mm the capacitors shall be mechanically fixed by the leads. metallized polyester film * For larger pitches the capacitors shall be mounted in the same way and the body clamped. handbook, halfpage Storage temperature * Storage temperature: Tstg = -25 to +40 C with RH maximum 80% without condensation. RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS metal spray layer Unless otherwise specified all electrical values apply at an ambient free air temperature of 23 1 C, an atmospheric pressure of 86 to 106 kPa and a relative humidity of 50 2%. connecting wire CBA073 For reference testing, a conditioning period shall be applied over 96 4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%. Fig.10 Construction. 1999 Apr 29 94 BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 CHARACTERISTICS Capacitance CBA074 2 handbook, full pagewidth C C (%) 1 0 -1 -2 -3 102 103 104 f (Hz) 105 Fig.11 Capacitance change as a function of frequency: typical curve. CBA919 6 handbook, full pagewidth C C (%) 4 2 0 -2 max. typical -4 min. -6 -60 -20 20 60 Tamb (C) Fig.12 Capacitance change at 1 kHz as a function of ambient free air temperature. 1999 Apr 29 95 100 BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 Impedance CBA076 102 handbook, full pagewidth MKT 365 Impedance () 10 63V ; 10 63V ;1 F 0n F 1 10-1 10-2 10-3 104 105 106 107 108 f (Hz) Fig.13 Impedance as a function of frequency: typical curves. Maximum DC and AC voltage as a function of temperature CBA086 1.2 handbook, full pagewidth factor 1.0 0.8 0.6 0.4 0.2 0 -60 -40 -20 0 20 40 60 80 100 Tamb (C) Fig.14 Multiplying factor for DC and AC voltage as a function of temperature. 1999 Apr 29 96 BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 Maximum RMS voltage (sinewave) as a function of frequency CBA077 102 handbook, full pagewidth MKT 365/366/367 AC voltage (V) 10 47 nF 10 0n F 47 0 10 nF 00 nF 1 10 102 103 104 f (Hz) 105 Fig.15 AC voltage (RS value) as a function of frequency at Tamb 85 C for Rdc = 63 V. CBA776 102 handbook, full pagewidth MKT 365/366/367 AC voltage (V) 10 47 10 nF 0n F 47 0 10 nF 00 nF 1 10 102 103 104 f (Hz) 105 Fig.16 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 100 C for URdc = 63 V. 1999 Apr 29 97 BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 CBA078 102 handbook, full pagewidth MKT 365/366/367 AC voltage (V) 10 10 47 nF nF 10 0n F 47 0n F 1 10 102 103 104 105 f (Hz) Fig.17 AC voltage (RMS value) as a function of frequency at Tamb 85 C, for URdc = 100 V. CBA777 102 handbook, full pagewidth MKT 365/366/367 AC voltage (V) 10 10 nF 47 1 10 nF 10 0 47 nF 0n F 102 103 104 f (Hz) 105 Fig.18 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 100 C for URdc = 100 V. 1999 Apr 29 98 BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 CBA079 103 handbook, full pagewidth MKT 365/366/367 AC voltage (V) 102 18 nF 47 10 1 10 102 103 104 nF 105 f (Hz) Fig.19 AC voltage (RMS value) as a function of frequency at Tamb 85 C, for URdc = 250 V. CBA778 103 handbook, full pagewidth MKT 365/366/367 AC voltage (V) 102 10 18 47 1 10 102 103 104 f (Hz) nF nF 105 Fig.20 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 100 C for URdc = 250 V. 1999 Apr 29 99 BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 CBA080 103 handbook, full pagewidth MKT 365/366/367 AC voltage (V) 102 3.3 15 nF nF 10 1 10 102 103 104 105 f (Hz) Fig.21 AC voltage (RMS value) as a function of frequency at Tamb 85 C, for URdc = 400 V. CBA779 103 handbook, full pagewidth MKT 365/366/367 AC voltage (V) 102 3.3 10 15 1 10 102 103 104 f (Hz) nF nF 105 Fig.22 AC voltage (RMS value) as a function of frequency at 85 C < Tamb 100 C for URdc = 400 V. Maximum RMS current (sinewave) as a function of frequency The maximum RMS current is defined by I ac = x C x U ac . Uac is the maximum AC voltage depending on the ambient temperature in Figs 15 to 22. 1999 Apr 29 100 BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 Tangent of loss angle CBA087 103 handbook, full pagewidth dissipation factor (x 10-4) 102 10 102 103 104 f (Hz) 105 Fig.23 Tangent of loss angle as a function of frequency: typical curve. Insulation resistance CBA088 105 RC (s) 104 103 102 -50 0 50 Tamb (C) Fig.24 RC product as a function of ambient free air temperature: typical curve. 1999 Apr 29 101 100 BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 Maximum allowed component temperature rise (T) as a function of the ambient temperature (Tamb) CBA821 20 handbook, full pagewidth T (C) 15 10 5 0 -60 -40 -20 0 20 40 80 60 100 Tamb (C) Fig.25 Maximum allowed component temperature rise as a function of the ambient temperature. Heat conductivity (G) as a function of pitch and capacitor body thickness in mW/C Table 1 Heat conductivity ORIGINAL PITCH (mm) bmax (mm) 5 7.5 3.5 1.5 3.0 4.0 2.0 3.5 4.5 2.5 3.5 5.0 2.5 4.0 5.5 3.0 4.0 6.0 3.5 4.5 6.5 - 5.0 Power dissipation and maximum component temperature rise The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. Power dissipation can be calculated in accordance with chapter "Introduction", section "Maximum power dissipation". The component temperature rise (T) can be measured (see section "Measuring the component temperature" for more details) or calculated by T = P G : * T = component temperature rise (C). * P = power dissipation of the component (mW). * G = heat conductivity of the component (mW/C). 1999 Apr 29 102 BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 Measuring the component temperature A thermocouple must be attached to the capacitor body; see Fig.26. handbook, halfpage thermocouple CBA771 Fig.26 Mounting the thermocouple. The temperature is measured in unloaded (Tamb) and maximum loaded condition (Tc). The temperature rise is given by T = T c - T amb . To avoid radiation or convection, the capacitor should be tested in a wind-free box. 1999 Apr 29 103 BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 Application note and limiting conditions These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as described below. These mains applications are strictly regulated by safety standards and therefore electromagnetic interference suppression capacitors conforming to the standards must be used. To select the capacitor for a certain application, the following conditions must be checked: 1. The peak voltage (Up) shall not be greater than the rated DC voltage (URdc). 2. The peak-to-peak voltage (Up-p) shall not be greater than the maximum Up-p to avoid the ionisation inception level. 3. The voltage pulse slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URdc and divided by the applied voltage. For all other pulses following equation must be fulfilled: T dU 2 dU 2 x -------- x dt < U Rdc x -------- dt dt rated 0 T is the pulse duration. The rated voltage pulse slope is valid for ambient temperatures up to 85 C. For higher temperatures a derating factor of 3% per K shall be applied. 4. The maximum component surface temperature rise must be lower than the limits in 0. 5. Since in circuits used at voltages over 280 V peak-to-peak the risk for an intrinsically active flammability after a capacitor breakdown (short circuit) increases, it is recommended that the power to the component is limited to 100 times the values mentioned in Table 1. 6. When using these capacitors as across-the-line capacitor in the input filter for mains applications or as series connected with an impedance to the mains the applicant must guarantee that following conditions are fulfilled in any case (spikes and surge voltages from the mains included). VOLTAGE CONDITIONS FOR 6 ABOVE ALLOWED VOLTAGES Tamb 85 C 85 C < Tamb 100 C URac 0.8 x URac Maximum temporary RMS overvoltage (<24 hours) 1.25 x URac URac Maximum peak voltage (Vo-p) (<2 s) 1.6 x URdc 1.3 x URdc Maximum continuous RMS voltage 1999 Apr 29 104 BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 Example C = 330 nF - 63 V used for the voltage signal shown in Fig.27. Up-p = 40 V; Up = 35 V; T1 = 100 s; T2 = 200 s. The ambient temperature is 35 C. Checking the conditions: 1. The peak voltage Up = 35 V is lower than 63 V (DC). 2. The peak-to-peak voltage 40 V is lower than 2 x 2 x 40V (AC) = 113 U p - p . 3. The voltage pulse slope dU/dt = 40 V/100 s = 0.4 V/s. This is lower than 110 V/s (see specific reference data for each version). 4. The dissipated power is 16.2 mW as calculated with Fourier terms. 16.2 mW The temperature rise for bmax = 4.5 mm and pitch = 5 mm will be --------------------------------- = 6.5 C . 2.5 mW C This is lower than 15 C temperature rise at 35 C; see Fig.25. 5. Not applicable. 6. Not applicable. voltage handbook, full pagewidth Up Up-p time T1 T2 CBA865 Fig.27 Voltage signal. 1999 Apr 29 105 BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 MARKING Product marking COUNTRY OF ORIGIN: BELGIUM handbook, halfpage The capacitors are marked on the top with black ink (see Figs 28 and 29), containing the following information: 1. Rated capacitance code in nF or F 0.047 K 63 CBA091 2. Tolerance on rated capacitance: K = 10%; J = 5% 3. Rated (DC) voltage. Fig.28 Example of marking for capacitors with pitch = 5 mm (kinked and straight leads). handbook, halfpage 470 K 100 CBA092 Fig.29 Example of marking for capacitors with pitch = 5 mm (bent back leads) and pitch = 7.5 mm (kinked and straight leads). COUNTRY OF ORIGIN: PRC (PEOPLE'S REPUBLIC OF CHINA) The capacitors are marked on the side with black ink (see Fig.30), containing the following information: handbook, halfpage 1. Rated capacitance code in nF or F 100n K100 2. Tolerance on rated capacitance: K = 10%; J = 5% 3. Rated (DC) voltage. CBA465 Fig.30 Example of marking for capacitors with pitch = 5 and 7.5 mm. 1999 Apr 29 106 BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 Package marking The package containing the capacitors is marked as shown in Fig.31. Please note: In due time BC COMPONENTS will replace PHILIPS COMPONENTS Barcode label marking handbook, full pagewidth 1. 2. LINE MARKING EXPLANATION 3. 1 Manufacturer's name 4. 2 Country of origin 5. 3 Sub-family 4 Type description 5 Capacitance value in F, tolerance, voltage and climatic category ("IEC 60068-1") 6 Batchnumber (only for capacitors from PRC) 7 * Country of origin: Belgium 6. Preference origin code: A Country of origin in code: 170 (Belgium) Responsible production centre: HQ Work order: WO 7. 8. * Country of origin: China Preference origin code: N Country of origin in code: 260 (PRC) Responsible production centre: 07 9. 10. 8 Product type description 9 Quantity and production period, year and week code 10 Product code (12NC) CCA337 Fig.31 Barcode label. 1999 Apr 29 107 BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 QUICK REFERENCE TEST REQUIREMENTS (see note 1) TEST PROCEDURE (quick reference) REQUIREMENTS Robustness of leads Tensile strength: "IEC 60068-2-21" load 10 N; 10 s Bending: "IEC 60068-2-21" load 5 N; 4 x 90 Resistance to soldering heat: "IEC 60068-2-20" solder bath: 260 C; 10 s Component solvent resistance isopropyl alcohol; 23 C; 5 minutes no visible damage legible marking C/C 2% tan 30 x 10-4; note 2 Robustness of component Vibration: "IEC 60068-2-6" Shock: "IEC 60068-2-27" 10 to 55 Hz; amplitude 0.75 mm or acceleration 98 m/s2; 6 hours half sinewave; 490 m/s2; 11 ms C/C 3% tan 30 x 10-4; note 2 Climatic sequence Dry heat: "IEC 60068-2-2" 16 hours; 100 C C/C 5% Damp heat cyclic, first cycle: "IEC 60068-2-30": Cold: "IEC 60068-2-1" tan 50 x 10-4; note 2 2 hours; -55 C Rins 50% of specified value Damp heat, remaining cycles: "IEC 60068-2-30" Other applicable tests Damp heat steady state: "IEC 60068-2-3" 56 days; 40 C; 90 to 95% RH C/C 5% tan 50 x 10-4; note 2 Rins 50% of specified value Endurance (DC): "IEC 60384-2" 2000 hours: 1.25 x URdc; 85 C 1 x URdc; 100 C Heat storage: "IEC 60384-2" 2000 hours; 100 C Resistance to soldering heat with preheating: "IEC 60384-2" body temperature: 100 C; bath temperature: 260 C; dwell time: 5 s C/C 5% tan 30 x 10-4; note 2 Rins 50% of specified value C/C 3% tan 30 x 10-4; note 2 C/C 2% (C 10 nF) C/C 1% (C > 10 nF) tan 30 x 10-4; note 2 Notes 1. For detailed information, see "Type detail specification HQN-384-02/105". 2. Measuring frequency 100 kHz for C 470 nF and 10 kHz for C > 470 nF. 1999 Apr 29 108