Power Relay MM CSM_MM_DS_E_2_1 Stable Contact Reliability and Long Life * Easy to mount, wire, and use. * A large selection of models including various contact forms, DC-switching models, and open models. * Mechanical life: 5,000,000 operations; electrical life (under rated load): 500,000 operations. * Models also available with built-in diodes and for use as auxiliary power relays. Refer to Safety Precautions for All Relays. Ordering Information Type Contact form Open structure Solder terminals Standard Cased Screw terminals Plug-in (octal pins) terminals DPDT MM2 MM2B MM2P 3PDT MM3 MM3B MM3P 4PDT MM4 MM4B MM4P DPDT MM2X MM2XB MM2XP 3PDT MM3X MM3XB MM3XP 4PDT MM4X MM4XB MM4XP DPDT --- --- MM2P-D 4PDT --- --- MM4P-D DPDT --- --- MM2XP-D 4PDT --- --- MM4XP-D DPDT --- --- MM2PN 3PDT --- --- MM3PN 4PDT --- --- MM4PN DPDT --- --- MM2XPN 3PDT --- --- MM3XPN 4PDT --- --- MM4XPN Conforming to auxiliary power relay speci- 4PDT fications --- --- MM4P-JD --- --- MM4XP-JD DC-switching With built-in diode DC-switching with built-in diode With operation indicator DC-switching with operation indicator Available Models Open Coils (with Solder Terminals) Type Standard DC-switching Contact form Relay model Available rated voltage DP MM2 6, 12, 24, 50, 100/(110), 200/(220) VAC 6, 12, 24, 48, 100/110, 200/220 VDC 3P MM3 100/(110), 200/(220) VAC 6, 12, 24, 48, 200/220 VDC 4P MM4 24, 100/(110), 200/(220) VAC 6, 12, 24, 48, 100/110, 200/220 VDC DP MM2X 100/(110), 200/(220) VAC 6, 12, 24, 48, 100/110, 200/220 VDC 3P MM3X 100/(110), 200/(220) VAC 12, 24, 100/110 VDC 4P MM4X 100/(110), 200/(220) VAC 12, 24, 48, 100/110 VDC 1 MM Open Coils (with Screw Terminals) Type Standard DC-switching Contact form Relay model Available rated voltage DP MM2B 6, 12, 24, 50, 100/(110), 200/(220) VAC 12, 24, 48, 100/110, 125, 200/220 VDC 3P MM3B 6, 100/(110), 200/(220) VAC 12, 24, 100/110 VDC 4P MM4B 6, 100/(110), 200/(220) VAC 12, 24, 48, 100/110 VDC DP MM2XB 24, 100/(110), 200/(220) VAC 12, 24, 48, 100/110, 125, 200/220 VDC 3P MM3XB 100/(110), 200/(220) VAC 12, 24, 48, 100/110, 125, 200/220 VDC 4P MM4XB 12, 24, 100/(110), 200/(220) VAC 6, 12, 24, 48, 100/110, 200/220 VDC Cased Coils (Plug-in Terminals) Type Standard Contact form Relay model Available rated voltage DP MM2P 6, 12, 24, 50, 100/(110), 200/(220) VAC 6, 12, 24, 48, 100/110, 125, 200/220 VDC 3P MM3P 6, 24, 100/(110), 200/(220) VAC 6, 12, 24, 48, 100/110, 125, 200/220 VDC 4P MM4P 6, 24, 50, 100/(110), 200/(220) VAC 12, 24, 48, 100/110, 125, 200/220 VDC DP MM2XP 6, 24, 100/(110), 125, 200/(220) VAC 6, 12, 24, 48, 100/110, 125, 200/220 VDC 3P MM3XP 24, 50, 100/(110), 200/(220) VAC 12, 24, 48, 100/110, 125, 200/220 VDC 4P MM4XP 12, 24, 50, 100/(110), 200/(220) VAC 6, 12, 24, 48, 100/110, 125, 200/220 VDC With built-in diode DP MM2P-D MM4P-D 12, 24, 48, 100/110, 200/220 VDC 12, 24, 48, 100/110, 125, 200/220 VDC DC-switching with built-in diode DP MM2XP-D MM4XP-D 12, 24, 48, 100/110, 125, 200/220 VDC 12, 24, 48, 100/110, 125, 200/220 VDC With operation indicator DP MM2PN 6, 24, 100/(110), 200/(220) VAC 6, 12, 24, 48, 100/110, 125, 200/220 VDC 3P MM3PN 100/(110), 200/(220) VAC 6, 12, 24, 48, 100/110, 200/220 VDC 4P MM4PN 24, 100/(110), 200/(220) VAC 24, 48, 100/110, 125, 200/220 VDC DP MM2XPN 100/(110), 200/(220) VAC 12, 24, 48, 100/110, 125, 200/220 VDC 3P MM3XPN 100/(110), 200/(220) VAC 24, 48, 100/110, 200/220 VDC 4P MM4XPN 100/(110), 200/(220) VAC 12, 24, 48, 100/110, 125, 200/220 VDC Conforming to auxiliary power relay specifications 4P MM4P-JD 100/(110), 110, 115, 200/(220), 220 VAC 24, 100/110, 125, 200/220 VDC Conforming to auxiliary power relay specifications for DC-switching 4P MM4XP-JD 100/(110), 110, 115, 200/(220) VAC 24, 48, 100/110, 125, 200/220 VDC DC-switching DC-switching with operation indicator Models Conforming to Auxiliary Power Relay Specifications The MM4P-JD and MM4XP-JD satisfy the ratings of auxiliary relays provided in JEC-2500 (1987) standards for power protective relays specified by the Japan Electromechanical Commission. Furthermore, the MM4P-JD and MM4XP-JD satisfy the ratings of multi-contact relays provided in JEC-174D (1979) standards for power auxiliary relays. These models work at operation level B specified by JEC-174D (1979) standards and the hot start of the relays is possible after the coils radiate heat. In accordance with JEC-2500 (1987) standards, the coil of each model withstands a 130% DC load or 115% AC load. Note: 1. When ordering, add the rated coil voltage to the model number. Rated coil voltages are given in the coil ratings table. Example: MM2, 6 VAC Rated coil voltage 2. Latching Relays based on the MM Series are also available. Refer to the MMK. 3. Models with built-in varistors (AC operation) are also available in addition to those with built-in diodes. Ask your OMRON representative for details. 2 MM Model Number Legend MM@@@@-@ 1 2 3 4 5 4. Operation Indicator None: Not provided N: Provided 5. Built-in Diode None: Not provided D: Provided 1. Contact Form 2: DPDT 3: 3PDT 4: 4PDT 2. Type (See Note.) None: Standard X: DC-switching 3. Terminal Shape None: Solder B: Screw P: Plug-in Note: The suffix "JD" indicates models conforming to auxiliary power relay specifications. Accessories (Order Separately) Mounting Brackets Mounting Bracket (S bracket) R99-03MM Sockets Relay model DIN Track/Front-connecting Socket (screw terminals) Back-connecting Socket (solder terminals) MM2(X)P(-D) 8PFA PL08 MM3P 11PFA PL11 MM3XP, MM4(X)P(-D) 14PFA PL15 MM4(X)P-JD 14PFA --- 3 MM Specifications Coil Ratings Open Coils (with Solder or Screw Terminals) Rated voltage (V) Rated current (mA) DP 50 Hz AC DC Coil resistance () 3P or 4P 60 Hz 50 Hz DP Mustoperate voltage 3P or 4P 60 Hz Mustrelease voltage Max. voltage Power consumption (VA or W) % of rated voltage 6 790 655 1,120 950 1.1 0.5 12 395 325 560 480 4.7 2.0 24 195 160 280 240 19 8.5 50 94 78 134 114 82 36 100/(110) 47 39/45 67 57/66 340 150 200/(220) 23.5 19.5/ 22.5 33.5 28.5/33 1,540 620 6 340 450 17.5 13.4 12 176 220 68 54 24 87 94 275 255 48 41 52 1,180 930 100/110 17/19 22/24.5 5,750 4,500 200/220 8.6/9.5 11/12 23,200 18,000 Initial Rated 80% max. 30% min. 110% (60 Hz) 25% min. (50 Hz) Approx. 4.1 (DP) Approx. 6.3 (3P or 4P) Approx. 3.5 (DP) Approx. 5.1 (3P or 4P) 70% max. 10% min. Approx. 2.1 (DP) Approx. 2.7 (3P or 4P) Note: 1. The rated current and coil resistance are measured at a coil temperature of 23C with tolerances of +15%/-20% for AC rated current and 15% for DC coil resistance. 2. The AC coil resistance values are reference values. 3. Performance characteristic data are measured at a coil temperature of 23C. 4. The maximum voltage is one that is applicable instantaneously to the Relay coil at an ambient temperature of 23C and not continuously. Cased Coils (Plug-in Terminals) The rated current may vary if the Relay has a built-in operating indicator (See note 4.). Rated voltage (V) Rated current (mA) DP 50 Hz AC DC 3P or 4P 60 Hz 50 Hz 60 Hz Coil resistance () DP 3P or 4P Coil inductance (H) DP 3P or 4P Contact Contact Contact Contact release operate release operate 6 690 590 975 850 1.1 0.5 0.02 0.02 0.01 0.03 12 345 295 490 430 4.7 2.0 0.07 0.01 0.04 0.07 24 170 145 245 210 19 8.5 0.28 0.41 0.18 0.28 50 82 70 117 102 82 36 1.2 1.7 0.75 1.2 100/(110) 41 35/40 58.5 51/58 340 150 4.8 6.7 3 4.5 200/(220) 20.5 17.5/ 20 29 25.5/ 29 1,540 620 20 25.6 12 19 6 340 450 17.5 13.4 0.2 0.36 0.23 0.35 12 176 220 68 54 0.74 1.0 0.87 1.4 24 87 94 275 255 4.2 5.8 5.6 9.2 48 41 52 1,180 930 20.4 26 27.3 45.5 100/110 17/19 22/24.5 5,750 4,500 81.6 92.5 61.4 96.5 200/220 8.6/9.5 11/12 23,200 18,000 340 380 158 250 Must- MustMax. operate release voltage voltage voltage % of rated voltage Power consumption (VA or W) Initial Rated Approx. 3.5 (DP) Approx. 5.1 (3P or 4P) 80% max. 110% 30% min. (60 Hz) 25% min. (50 Hz) Approx. 4.1 (DP) Approx. 6.3 (3P or 4P) 70% max. 10% min. Approx. 2.1 (DP) Approx. 2.7 (3P or 4P) Note: 1. The rated current and coil resistance are measured at a coil temperature of 23C with tolerances of +15%/-20% for AC rated current and 15% for DC coil resistance. 2. The AC coil resistance and coil inductance values are for reference only. 3. Performance characteristic data are measured at a coil temperature of 23C. 4. The maximum voltage is one that is applicable instantaneously to the Relay coil at an ambient temperature of 23C and not continuously. 5. The rated current of a model with a built-in LED indicator at 6, 12, 24, or 50 VAC or 6, 12, 24, or 48 VDC increases by approx. 10 mA due to the current consumption of the LED. The rated current of a model with a built-in neon lamp indicator at 100/(110) or 200/(220) VAC or 100/110 or 200/220 VDC increases by approx. 0.2 mA due to the current consumption of the neon lamp. 4 MM Coils (Conforming to Auxiliary Power Relay Specifications) Rated voltage (V) Rated current (mA) 50 Hz AC DC Coil Coil inductance (H) resistance () 60 Hz Contact release Mustoperate voltage Contact operate 24 245 210 8.5 0.18 0.28 50 117 102 36 0.75 1.2 100/(110) 58.5 51/58 150 3 4.5 110 53 46 182 3.6 5.5 115 51 44 210 4 6.2 200/(220) 29 25.5/29 620 12 19 220 26.5 23 780 15 21 24 94 255 5.6 9.2 48 52 930 27.3 45.5 100/110 22/24.5 4,500 61.4 96.5 125 22 5,800 90 130 200/220 11/12 18,000 158 250 Mustrelease voltage Max. voltage Opera- Power consumption tion level (VA or W) (JEC174D) Initial Rated % of rated voltage 80% max. 30% min. 110% (60 Hz) 25% min. (50 Hz) B Hot start after coil heated 70% max. 10% min. Approx. 6.3 Approx. 5.1 Approx. 2.7 Note: 1. The rated current and coil resistance are measured at a coil temperature of 23C with tolerances of +15%/-20% for AC rated current and 15% for DC coil resistance. 2. The AC coil resistance and coil inductance values are for reference only. 3. Performance characteristic data are measured at a coil temperature of 23C. 4. The maximum voltage is one that is applicable instantaneously to the Relay coil at 23C and not continuously. Contact Ratings Standard Relays Item Open Relays Cased Relays MM2(B), MM3(B), MM4(B) MM2P(N, -D), MM3P(N), MM4P(N, -D) Resistive load (cos = 1) Inductive load (cos=0.4, L/R=7 ms) Resistive load (cos = 1) Contact type Single Contact material Ag Rated load 15 A at 220 VAC 10 A at 24 VDC Rated carry current 15 A 7.5 A Max. switching voltage 250 VAC, 250 VDC 250 VAC, 250 VDC Max. switching current 15 A 7.5 A Max. switching power (reference value) 3,300 VA at 240 W 1,700 VA at 120 W Inductive load (cos=0.4, L/R=7 ms) 7.5 A at 220 VAC 5 A at 24 VDC Minimum permissible load 5 VDC 10 mA (reference value) (See note.) Note: This value is measured at 60 operations/min. DC-switching Relays/Built-in Diode Relays Item Open Relays Cased Relays MM2X(B), MM3X(B), MM4X(B) MM2XP(-D), MM3XP, MM4XP(-D) Resistive load (cos = 1) Inductive load (L/R=7 ms) Resistive load (cos = 1) Contact type Single Contact material Ag Rated load 10 A at 110 VDC Rated carry current 15 A Max. switching voltage 250 VAC, 250 VDC 250 VAC, 250 VDC Max. switching current 15 A 7.5 A Max. switching power (reference value) 1,200 W at 20 VA 7 A at 110 VDC 7 A at 110 VDC Inductive load (L/R=7 ms) 6 A at 110 VDC 7.5 A 800 W at 20 VA 800 W at 20 VA 660 W at 20 VA Minimum permissible load 5 VDC at 10 mA (reference value) (See note 3.) Note: 1. When switching DC inductive loads at 125 V or more, an unstable region exists for a contact current of between 0.5 and 2.5 A. The Relay will not turn OFF in this region. Use a contact current of 0.5 A or less when switching 125 VDC or more. 2. If L/R exceeds 7 ms when switching DC inductive loads, an arc-breaking time of up to 50 ms must be considered in application and the circuit must be designed to ensure that an arc-breaking time of 50 ms is not exceeded. 3. This value is measured at 60 operations/min. 5 MM Contacts (Conforming to Auxiliary Power Relay Specifications) Item MM4P-JD Resistive load MM4XP-JD Inductive load (cos = 0.4, L/R = 7 ms) Contact type Single Contact material Ag Rated load 5 A at 220 VAC, 5 A at 24 VDC Rated carry current 5A Max. switching voltage 250 VAC, 250 VDC Max. switching current 5A Max. switching power (reference value) 1,100 VA, 120 W, 30 W (L/R = 40 ms) Resistive load Inductive load (cos = 0.4, L/R = 7 ms) 5 A at 110 VDC 20 VA, 550 W, 40 W (L/R = 40 ms) Note: 1. A model for DC loads is not in stable operation when switching an inductive load within a operating current range between 0.5 and 2.5 A at a minimum of 125 VDC, where the load cannot be switched. 2. If L/R exceeds 7 ms when switching DC inductive loads, an arc-breaking time of up to 50 ms must be considered in application and the circuit must be designed to ensure that an arc-breaking time of 50 ms is not exceeded. Characteristics Standard Relays Item Open Relays Cased Relays Contact resistance (See note 2.) 25 m max. 50 m max. Operate time (See note 3.) AC: 25 ms max. DC: 50 ms max. Release time (See note 3.) 30 ms max. (100 ms max. for Built-in Diode Relays) Max. operating frequency Mechanical:7,200 operations/hr Electrical:1,800 operations/hr (under rated load) Insulation resistance (See note 4.) 100 M min. (at 500 VDC) Dielectric strength 1,500 VAC, 50/60 Hz for 1 min between contacts of same polarity 2,000 VAC, 50/60 Hz for 1 min between contacts of different polarity (and between coil and contacts) Vibration resistance Destruction: 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude) Malfunction: 10 to 50 to 10 Hz, 0.5 mm single amplitude (1.0 mm double amplitude) Shock resistance Destruction: 1,000 m/s2 Malfunction: 100 m/s2 Endurance Mechanical: 5,000,000 operations min. (at 7,200 operations/hr) Electrical: 500,000 operations min. (at 1,800 operations/hr under rated load) (See note 5.) Ambient temperature Operating:-10C to 55C (with no icing or condensation) Ambient humidity Operating:5% to 85% Weight Standard models: DC-switching models MM2 approx. 160 g MM2X approx. 165 g MM3 approx. 270 g MM3X approx. 275 g MM4 approx. 300 g MM4X approx. 310 g MM2P approx. 220 g MM3P approx. 360 g MM4P approx. 410 g MM2XP approx. 225 g MM3XP approx. 395 g MM4XP approx. 420 g Note: 1. The data shown above are initial values. 2. The contact resistance was measured with 1 A at 5 VDC using the voltage drop method. 3. The operate or release time was measured with the rated voltage imposed with any contact bounce ignored at an ambient temperature of 23C. 4. The insulation resistance was measured with a 500-VDC megger applied to the same places as those used for checking the dielectric strength. 5. The electrical endurance was measured at an ambient temperature of 23C. 6 MM Relays (Conforming to Auxiliary Power Relay Specifications) Item Cased Relays Contact resistance (See note 2.) 50 m max. Operate time (See note 3.) AC: 25 ms max., DC: 50 ms max. Release time (See note 3.) 30 ms max. Max. operating frequency Mechanical: Electrical: 1,800 operations/hr 1,800 operations/hr (under rated load) Insulation resistance (See note 4.) 100 M min. Dielectric strength Between coil and contact: 2,000 VAC, 50/60 Hz for 1 minute Between contacts of different polarity: 2,000 VAC, 50/60 Hz for 1 minute Between contacts of same polarity: 1,500 VAC, 50/60 Hz for 1 minute Vibration resistance Destruction: 10 to 55 to 10 Hz, 0.75 mm single amplitude (1.5 mm double amplitude) Malfunction: 10 to 22 to 10 Hz, 0.5 mm single amplitude (1.0 mm double amplitude) Shock resistance Destruction: 300 m/s2 Malfunction: 30 m/s2 Endurance Mechanical: 5,000,000 operations min. (at 1,800 operations/hr) Electrical: 500,000 operations min. (at 1,800 operations/hr with rated load) (see note 5) Error rate (level P) (Reference value) (See note 6.) 10 mA at 5 VDC Ambient temperature Operating: -10C to 40C (with no icing or condensation) Ambient humidity Operating: 5% to 85% Weight MM4P-JD: approx. 410 g MM4XP-JD: approx. 420 g Note: 1. The data shown above are initial values. 2. The contact resistance was measured with 1 A at 5 VDC using the voltage drop method. 3. The operate or release time was measured with the rated voltage imposed with any contact bounce ignored at an ambient temperature of 23C. 4. The insulation resistance was measured with a 500-VDC megger applied to the same places as those used for checking the dielectric strength. 5. The electrical endurance was measured at an ambient temperature of 23C. 6. This value was measured at a switching frequency of 60 operations per minute. Engineering Data Standard Relays Maximum Switching Power Open Relays MM@(B) Cased Relays MM@P(N, -D) AC inductive load (cos = 0.4) DC inductive load L/R = 7 ms DC resistive load Switching voltage (V) Switching current (A) Switching current (A) AC resistive load AC resistive load AC inductive load (cos = 0.4) DC resistive load DC inductive load L/R = 7 ms Switching voltage (V) 7 MM Endurance Curves Open Relays Cased Relays MM@P(N, -D) 10,000 7,000 5,000 220 VAC resistive load inductive load (cos = 0.4) 3,000 1,000 700 500 24 VDC resistive load inductive load L/R = 7 ms 300 10,000 7,000 Endurance (x10 3operations) Endurance (x103 operations) MM@(B) 5,000 220 VAC resistive load inductive load (cos = 0.4) 3,000 1,000 700 500 24 VDC resistive load inductive load L/R = 7 ms 300 100 100 Switching current (A) Switching current (A) DC-switching Relays Maximum Switching Power Open Relays Cased Relays MM@X(B) MM@XP(N, -D) DC resistive load Switching current (A) Switching current (A) DC resistive load DC inductive load L/R = 7 ms DC inductive load L/R = 7 ms Switching voltage (V) Endurance Curves Open Relays Cased Relays Endurance (x10 3 operations) Endurance (x103 operations) Switching voltage (V) 10,000 5,000 3,000 24 VDC resistive load 110 VDC resistive load 1,000 500 300 110 VDC inductive load L/R = 7 ms 100 50 10,000 5,000 3,000 1,000 110 VDC resistive load 500 300 110 VDC inductive load L/R = 7 ms 100 50 30 30 10 10 Switching current (A) 24 VDC resistive load Switching current (A) 8 MM Relays Conforming to Auxiliary Power Relay Specifications Maximum Switching Power MM4XP-JD AC resistive load AC inductive load cos = 0.4 Switching current (A) Switching current (A) MM4P-JD DC resistive load DC inductive load L/R = 7 ms DC resistive load DC inductive load L/R = 7 ms Switching voltage (V) Switching voltage (V) Endurance Curves MM4XP-JD 220 VAC: resistive load inductive load cos = 0.4 Endurance (x 10 4 ) Endurance (x 10 4 ) MM4P-JD 110 VDC: resistive load inductive load L/R = 7 ms 24 VDC resistive load Inductive load L/R = 7 ms Switching current (A) Switching current (A) 9 MM Ambient Temperature vs. Must-operate and Must-release Voltage MM2P DC Number of Relays: 5 Must-operate voltage Must-release voltage Must-operate and reset voltage (%) Must-operate and reset voltage (%) MM2P AC (60 Hz) Number of Relays: 5 Ambient temperature (C) Must-operate voltage Must-release voltage Ambient temperature (C) Ambient Temperature vs. Coil Temperature Rise MM2P DC Coil temperature rise ( C) Coil temperature rise ( C) MM2P 110 VAC (60 Hz) Contact carry current Number of Relays: 5 Ambient temperature (C) Malfunctioning Shock MM2P AC Contact carry current Number of Relays: 5 Ambient temperature (C) Contact Reliability (Improved Allen-Bradley Test Circuit) Unit: m/s2 Number of samples: 5 Measurement conditions: Impose a shock of 100 m/s2 in the X, Y, and Z directions three times each with the Relay energized and not energized to check the shock values that cause the Relay to malfunction. Contact load: 10 mA at 5 VDC (resistive load) Error rate l = 0.0202 x 10-6/operations (level Q) Accumulated number of errors NO contact NC contact Accumulated number of errors MM4P 24 VDC Contact load: 1 mA at 5 VDC (resistive load) Error rate l = 0.2794 x 10-6/operations (level N) Shock direction Number of switching operations (x 104 times) Number of switching operations (x 104 times) 10 MM Relay Mounting Adjacent Distance vs. Coil Temperature Rise Coil temperature rise ( C) MM4P 100 /(110) VAC Relay mounting position Condition: The saturated coil temperature is measured with the rated carry current (7.5 A) at the rated coil voltage (100 VAC at 50 Hz). Upper Lower Average of No. 2, 4, 6, and 8 Average of No. 1, 3, 7, and 9 Contact carry current (7.5 A) No contact carry current Average of No. 2, 4, 6, and 8 Average of No. 1, 3, 7, and 9 Mounting adjacent distance l (mm) Dimensions Note: All units are in millimeters unless otherwise indicated. Standard Relays Open Relays Solder Terminals MM2(X), MM4(X), MM3(X) MM3(X) MM2(X) 2P 1P 3P 53.5 max. MM4(X) 1P 4P 61.5 max. Four, M4 mounting screw holes MM2 2P 22 40 max. 3P 2P Side View 1P Common C Stationary A Stationary B 61.5 max. 28 50 max. Four, M4 mounting screw holes 13 22 51 max. 34 63 max. Four, M4 mounting screw holes Note: Connect the common (C) of MM@X to positive (+). Screw Terminals MM2(X)B, MM3(X)B, MM4(X)B MM2(X)B 2P 1P MM3(X)B Eight, M3.5 x 5.5 screws 3P 2P 1P Side View MM4(X)B Eleven, M3.5 x 5.5 screws 4P 3P Fourteen, M3.5 x 5.5 screws 2P 1P Common C Stationary A Stationary B 59.5 max. 67.5 max. 67.5 max. 22 MM2B Four, M4 mounting screw holes 22 55 max. 28 Four, M4 mounting screw holes 60 max. Four, M4 mounting screw holes 34 67 max. 18.5 56 max. Note: Connect the common (C) of MM@XB to positive (+). 11 MM Mounting Holes (Bottom View) Direct mounting Four, 4.5-dia. mounting holes 220.2 Length of l DPDT: 220.2 3PDT: 280.2 4PDT: 340.2 Mounting Bracket (S Bracket) R99-03 (S KANAGU) FOR MM@ H The S Bracket can be used to mount a Relay with open solder or screw terminals. R99-03 (S KANAGU) R99-03 (S KANAGU) FOR MM3. 4 (61) FOR MM2 (611) 3PDT, 4PDT (DPDT) W 22 0.2 58 0.2 220.2 l 22 28, 34 D 71 max. 71 max. W 36 max. 46 max. H 6 max. 44 6 max. l 12 MM Cased Relays Case-protection plate Plug-in Terminals MM2P(N, -D) MM2XP(N, -D) 80.5 max. 59.5 max. 7 3.5 24 47.5 max. MM2P 73 max. Note: As shown in the diagram, there are three 10-dia. holes in the side of the case for the MM2XP(N, -D). When a case-protection plate is attached, the width of the Relay will be 48 mm max. Terminal Arrangement (Bottom View) l MM2P Make sure that all common connections have the same polarity for the MM2XP-N/-D. The markings of the common connections on the casing all show "+" but the polarity of the common connections can be either negative or positive as long as they are all the same. MM2P-D MM2PN MM2PN 6, 12, 24, 50 VAC MM2XP MM2XP-D 6, 12, 24, 48 VDC MM2XPN 6, 12, 24, 50 VAC MM2XPN 6, 12, 24, 48 VDC MM2PN 100/(110), 200/(220) VAC 100/110, 200/220 VDC MM2XPN 100/(110), 200/(220) VAC 100/110, 200/220 VDC Note: Wire the terminals correctly with no mistakes in coil polarity. MM3P(N) 80.5 59.5 max. max. 3.5 24 61.5 max. MM3P 7 81 max. Terminal Arrangement (Bottom View) MM3P MM3PN 6, 12, 24, 50 VAC MM3PN 6, 12, 24, 48 VDC MM3PN 100/(110), 200/(220) VAC 100/110, 200/220 VDC Note: Wire the terminals correctly with no mistakes in coil polarity. 13 MM MM3PXP(N) MM4P(N, -D) MM4XP(N, -D) Case-protection plate 80.5 59.5 max. max. 3.5 24 79.5 max. (See note 2.) MM4P 7 81.5 max. Note 1: As shown in the diagram, there are three 10-dia. holes in the side of the case for MM@XP(N, -D). 2: When a case-protection plate is attached, the width of the Relay will be 80 mm max. Terminal Arrangement (Bottom View) MM3XP Make sure that all common connections have the same polarity for the MM@XP-N/-D. The markings of the common connections on the casing all show "+" but the polarity of the common connections can be either negative or positive as long as they are all the same. MM3XPN MM3XPN MM4P MM4P-D MM4PN 6, 12, 24, 50 VAC MM4XP MM3XPN 6, 12, 24, 48 VDC 6, 12, 24, 50 VAC MM4XP-D 100/(110), 200/(220) VAC 100/110, 200/220 VDC MM4PN 6, 12, 24, 48 VDC MM4XPN MM4XPN 6, 12, 24, 50 VAC 6, 12, 24, 48 VDC MM4PN 100/(110), 200/(220) VAC 100/110, 200/220 VDC MM4XPN 100/(110), 200/(220) VAC 100/110, 200/220 VDC Note: Wire the terminals correctly with no mistakes in coil polarity. 14 MM MM4P-JD Terminal Arrangement (Bottom View) 70.5 max. 59.5 max. 81.5 max. 79.5 max. MM4XP-JD 70.5 max. 59.5 max. 81.5 max. 80 max. Note: Make sure that all common connections are the same in polarity. The markings of the common connections on the casing all show "+" but the polarity of the common connections can be either all negative or all positive. Relays with Operation Indicators Dimensions are the same as those for standard Relays except that there are three 10-mm holes in the case as shown below. Accessories Sockets Relay model DIN Track/Front-connecting Socket (screw terminals) Back-connecting Socket (solder terminals) MM2(X)P(-D) 8PFA PL08 MM3P 11PFA PL11 MM3XP, MM4(X)P(-D) 14PFA PL15 MM4(X)P-JD 14PFA --- Note: When using the MM4(X)P-JD (i.e., a model conforming to auxiliary power relay specifications) by itself, the PL15 Back-connecting Socket cannot be used. 15 MM Height with Socket DIN Track/Front-connecting Socket 95.5 MM2(X)P 113 92 8PFA Back-connecting Socket MM3XP 110 109.5 113.5 MM4(X) MM4(X)P-JD MM3P 11PFA 78 14PFA MM2(X)P 86 PL08 MM3P MM3XP 86.5 MM4(X)P PL11 PL15 Safety Precautions Refer to Safety Precautions for All Relays. Connection MMXP * Use proper crimp terminals or 1.2- to 2-mm-dia. single-conductor wire to connect screw terminals. * Connect loads to DC-switching Relays so that arcs from adjacent terminals will not strike each other. E.g., connect all common terminals to the same polarity. * Screw Terminal Model: Do not bend the coil terminals, otherwise the coil wire may be disconnected. Make sure that the tightening torque applied to each terminal is 0.78 to 1.18 N*m and the insertion force is 49 N for 10 s. * Do not reverse polarity when connecting open DC-switching Relays, including 3- and 4-pole models. The MMXP has a hole in the Relay case to allow gas to escape. Do not use this Relay in locations subject to excessive dust. Installation The contact load should be greater than the power consumption of the coil. If it is less than this power consumption or if the Relay is operated very infrequently, the contact can change chemically thus causing unstable operation. * Do not install the Relays where iron dust can adhere to the contacts or coil. Such dust can prevent the armature from moving freely and inhibit proper electrical contact. * Relays can generate arcs externally. Either install the Relay in a location where a nearby object will not burn or use a covered Relay. * DC-switching Relays contain a permanent magnet in the insulation base. Do not place a magnet or magnetic object near this base. Doing so will reduce the power of the permanent magnet, thus reducing Relay capacity. * Insert PL Back-mounting Sockets from the back of the panel. * Separate Relays from each other by at least 20 mm when mounting multiple Relays together. 20 mm min. MM MM Mounting orientation * Relays should be mounted with the armature facing down. Wiring When connecting a load to the contact terminals of a model for DC loads, consider the polarity of the contact terminals so that the generated arcs on the adjacent poles will not collide. If the common connections of the Relay are all positive or all negative, no arc collision will occur. Contact Loads Soldering When soldering solder terminals, do not let flux or other foreign matter adhere to contacts or do not let the coil terminals become bent. Also, solder as quickly as possible because excessive heat may damage the coil. Diode Built into Relays A diode is built into the Relays to absorb reverse electromotive force from the relay coil. The diode will be destroyed if a large external surge voltage is applied. If there is a possibility of a large external surge voltage being applied, take suitable measures to absorb the surge. Storage A model for DC loads incorporates a permanent magnetic for arc suppression. Keep floppy disks away from the Relay, otherwise the data on the floppy disk may be damaged. Operating Environment Do not use the Relay in places with flammable gas, otherwise an explosion may result due to an arc generated from the Relay ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. In the interest of product improvement, specifications are subject to change without notice. 16 Read and Understand This Catalog Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranty and Limitations of Liability WARRANTY OMRON's exclusive warranty is that the products are free from defects in materials and workmanship for a period of one year (or other period if specified) from date of sale by OMRON. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, REGARDING NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR PARTICULAR PURPOSE OF THE PRODUCTS. ANY BUYER OR USER ACKNOWLEDGES THAT THE BUYER OR USER ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. OMRON DISCLAIMS ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. LIMITATIONS OF LIABILITY OMRON SHALL NOT BE RESPONSIBLE FOR SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED ON CONTRACT, WARRANTY, NEGLIGENCE, OR STRICT LIABILITY. In no event shall the responsibility of OMRON for any act exceed the individual price of the product on which liability is asserted. IN NO EVENT SHALL OMRON BE RESPONSIBLE FOR WARRANTY, REPAIR, OR OTHER CLAIMS REGARDING THE PRODUCTS UNLESS OMRON'S ANALYSIS CONFIRMS THAT THE PRODUCTS WERE PROPERLY HANDLED, STORED, INSTALLED, AND MAINTAINED AND NOT SUBJECT TO CONTAMINATION, ABUSE, MISUSE, OR INAPPROPRIATE MODIFICATION OR REPAIR. Application Considerations SUITABILITY FOR USE OMRON shall not be responsible for conformity with any standards, codes, or regulations that apply to the combination of products in the customer's application or use of the products. At the customer's request, OMRON will provide applicable third party certification documents identifying ratings and limitations of use that apply to the products. This information by itself is not sufficient for a complete determination of the suitability of the products in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of the products, nor is it intended to imply that the uses listed may be suitable for the products: * Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this catalog. * Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. * Systems, machines, and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to the products. NEVER USE THE PRODUCTS FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCTS ARE PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. PROGRAMMABLE PRODUCTS OMRON shall not be responsible for the user's programming of a programmable product, or any consequence thereof. Disclaimers CHANGE IN SPECIFICATIONS Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change model numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the products may be changed without any notice. When in doubt, special model numbers may be assigned to fix or establish key specifications for your application on your request. Please consult with your OMRON representative at any time to confirm actual specifications of purchased products. DIMENSIONS AND WEIGHTS Dimensions and weights are nominal and are not to be used for manufacturing purposes, even when tolerances are shown. PERFORMANCE DATA Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of OMRON's test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to the OMRON Warranty and Limitations of Liability. ERRORS AND OMISSIONS The information in this document has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical, or proofreading errors, or omissions. 2008.11 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2008 All Right Reserved.