Preliminary Datasheet M62354P/FP/GP R03DS0043EJ0400 Rev.4.00 Jun 03, 2011 8-bit 6ch D/A Converter with Buffer Amplifiers Description The M62354 is an integrated circuit semiconductor of CMOS structured with 6 channels of built-in D/A converters with output buffer operational amplifiers. The 3-wire serial interface method is used for the transfer format of digital data to allow connection with microcomputer with minimum wiring. It is able to cascading serial use with DO terminal. The output buffer operational amplifier operates in the whole voltage range from power supply to ground for both input/output. Features 12-bit serial data input (3-wire serial data transfer method) Highly stable output buffer operational amplifier allow operation in the all voltage range from power supply to ground. Application Adjustment/control of industrial or home-use electronic equipment, such as VTR camera, VTR set, TV, and CRT display. Block Diagram VCC VDD AO6 AO5 AO4 AO3 14 13 12 11 10 9 VSS 8 + - + - + - + - Buffer OP Amp D/A D/A D/A 8-bit R-2R segment D/A converter Ch6 5 L 4 L 3 8-bit latch L (6) (6) ...... .... Address decoder 8-bit latch L 2 D/A + - D11 10 9 8 D7 6 5 4 3 2 1 0 12-bit shift register 8-bit R-2R segment D/A converter + - Ch1 Buffer OP Amp 1 2 3 4 5 6 7 DO LD CLK DI AO1 AO2 GND R03DS0043EJ0400 Rev.4.00 Jun 03, 2011 Page 1 of 9 M62354P/FP/GP Preliminary Pin Arrangement M62354P/FP M62354GP VCC DO 1 16 13 VDD LD 2 15 VDD 12 AO6 CLK 3 14 AO6 4 11 AO5 DI 4 13 AO5 AO1 5 10 AO4 AO1 5 12 AO4 AO2 6 9 AO3 AO2 6 11 AO3 VSS NC 7 10 NC GND 8 9 VSS DO 1 14 LD 2 CLK 3 DI GND 7 8 (Top view) Outline: 14P4 [P] (not recommend for new design) PRSP0014DD-A (14P2N-A) [FP] VCC NC: No connection (Top view) Outline: PLSP0016JA-A (16P2E-A) [GP] Pin Description Pin No. 4 (4) 1 (1) 3 (3) 2 (2) 5 (5) 6 (6) 9 (11) 10 (12) 11 (13) 12 (14) 14 (16) 7 (8) 13 (15) 8 (9) Note: Pin Name DI DO CLK LD AO1 AO2 AO3 AO4 AO5 AO6 VCC GND VDD VSS Function Serial data input terminal Serial data output terminal Serial clock input terminal LD terminal input high level then latch circuit data load 8-bit D/A converter output terminal Power supply terminal Digital and analog common GND D/A converter upper reference voltage input terminal D/A converter lower reference voltage input terminal ( ) : M62354GP R03DS0043EJ0400 Rev.4.00 Jun 03, 2011 Page 2 of 9 M62354P/FP/GP Preliminary Block Diagram for Explanation of Terminals VCC GND 14 7 DI 4 CLK 3 12-bit shift register D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 Address decoder (8) (6) D0 1 ..... 8-bit latch D7 8-bit R-2R segment D/A converter ......................................... 5 ..... 8-bit latch LD D7 8-bit R-2R segment D/A converter 12 AO6 AO1 VDD (VrefU) 2 + - + - 13 ............................... DO 1 2 3 4 5 6 D0 ............................... 6 1 8 VSS (VrefL) Absolute Maximum Ratings Item Supply voltage D/A converter upper reference voltage Input voltage Output voltage Power dissipation Operating temperature Storage temperature R03DS0043EJ0400 Rev.4.00 Jun 03, 2011 Symbol VCC VDD VIN VO Pd Topr Tstg Ratings -0.3 to +7.0 -0.3 to +7.0 -0.3 to VCC + 0.3 -0.3 to VCC + 0.3 440 (P) / 250 (FP) / 150 (GP) -20 to +85 -40 to +125 Unit V V V V mW C C Page 3 of 9 M62354P/FP/GP Preliminary Electrical Characteristics <Digital Part> (VCC, VrefU = 5 V 10%, VCC VrefU, GND, VrefL = 0 V, Ta = -20 to +85C, unless otherwise noted.) Min Limits Typ Max Unit Supply voltage Circuit current VCC ICC 4.5 -- 5.0 0.7 5.5 2.5 V mA Input leak current Input low voltage Input high voltage Output low voltage Output high voltage IILK VIL VIH VOL VOH -10 -- 0.8 VCC -- VCC - 0.4 -- -- -- -- -- 10 0.2 VCC -- 0.4 -- A V V V V Item Symbol Conditions CLK = 1 MHz operation VCC = 5 V, IAO = 0 A VIN = 0 to VCC IOL = 2.5 mA IOH = -400 A <Analog Part> (VCC, VrefU = 5 V 10%, VCC VrefU, Ta = -20 to +85C, unless otherwise noted.) Min Limits Typ Max Unit Current dissipation IDD -- 0.7 1.3 mA D/A converter upper reference voltage range VDD 3.5 -- VCC V D/A converter lower reference voltage range VSS GND -- VCC - 3.5 V Buffer amplifier output voltage range VAO IAO -- -- -- VCC - 0.1 VCC - 0.2 1 V Buffer amplifier output drive range 0.1 0.2 -1 mA Differential nonlinearity error Nonlinearity error Zero code error Full scale error Output capacitive load SDL -1.0 -- 1.0 LSB SL SZERO SFULL CO -1.5 -2 -2 -- -- -- -- -- -- 5 1.5 2 2 0.1 -- LSB LSB LSB F Item Buffer amplifier output impedance Symbol RO R03DS0043EJ0400 Rev.4.00 Jun 03, 2011 Conditions VrefU = 5 V, VrefL = 0 V Data condition: at maximum current The output does not necessarily be the value within the reference voltage setting range. The output value is determined by the buffer amplifier output voltage range (VAO). IAO = 100 A IAO = 500 A Upper side saturation voltage = 0.3 V Lower side saturation voltage = 0.2 V VrefU = 4.79 V VrefL = 0.95 V VCC = 5.5 V (15 mV/LSB) Without load (IAO = 0 A) Page 4 of 9 M62354P/FP/GP Preliminary AC Characteristics (VCC, VrefU = 5 V 10%, VCC VrefU, GND, VrefL = 0 V, Ta = -20 to +85C, unless otherwise noted.) Item Clock "L" pulse width Clock "H" pulse width Clock rise time Clock fall time Data setup time Data hold time LD setup time LD hold time LD "H" pulse width Data output delay time D/A output setting time Symbol tCKL tCKH tCR tCF tDCH tCHD tCHL tLDC tLDH tDO tLDD Min Limits Typ Max Unit 200 200 -- -- 30 60 200 100 100 70 -- -- -- -- -- -- -- -- -- -- -- -- -- -- 200 200 -- -- -- -- -- 350 300 ns ns ns ns ns ns ns ns ns ns s Conditions CL 100 pF CL 100 pF, VAO: 0.5 4.5 V The time until the output becomes the final value of 1/2 LSB Timing Chart tCR tCKH tCF CLK tCKL tLDC DI tLDH tDCH tCHD tCHL LD tLDD D/A output tDO DO output R03DS0043EJ0400 Rev.4.00 Jun 03, 2011 Page 5 of 9 M62354P/FP/GP Preliminary Digital Data Format First MSB Last LSB D0 D1 D2 D3 D4 D5 D6 D7 DAC data D8 D9 D10 D11 DAC select data DAC Data D0 0 1 0 1 : 0 1 D1 0 0 1 1 : 1 1 Note: D2 0 0 0 0 : 1 1 D3 0 0 0 0 : 1 1 D4 0 0 0 0 : 1 1 D5 0 0 0 0 : 1 1 D6 0 0 0 0 : 1 1 D7 0 0 0 0 : 1 1 D/A Output (VrefU - VrefL) / 256 1 + VrefL (VrefU - VrefL) / 256 2 + VrefL (VrefU - VrefL) / 256 3 + VrefL (VrefU - VrefL) / 256 4 + VrefL : (VrefU - VrefL) / 256 255 + VrefL VrefU VrefU = VDD, VrefL = VSS DAC Select Data D8 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 D9 0 0 0 0 1 1 1 1 0 0 0 0 1 1 1 1 D10 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 D11 0 1 0 1 0 1 0 1 0 1 0 1 0 1 0 1 DAC Selection Don't care AO1 selection AO2 selection AO3 selection AO4 selection AO5 selection AO6 selection Don't care Don't care Don't care Don't care Don't care Don't care Don't care Don't care Don't care Timing Chart (Model) MSB DI D11 CLK LSB D10 D9 D8 ............. D2 D1 D0 .................. LD D/A output R03DS0043EJ0400 Rev.4.00 Jun 03, 2011 Page 6 of 9 M62354P/FP/GP Preliminary Typical Characteristics Upper Side Saturation Voltage vs. Output Source Current Lower Side Saturation Voltage vs. Output Sink Current 150 Lower Side Saturation Voltage VAOSATL (mV) Upper Side Saturation Voltage VCC-VAOSATU (mV) 150 100 50 100 50 0 0 0 200 400 600 800 1000 Output Source Current IAOD (A) R03DS0043EJ0400 Rev.4.00 Jun 03, 2011 0 200 400 600 800 1000 Output Sink Current IAOS (A) Page 7 of 9 M62354P/FP/GP Preliminary Package Dimensions 14P4 Plastic 14pin 300mil DIP Weight(g) 1.0 Lead Material Alloy 42/Cu Alloy 8 1 7 E 14 c JEDEC Code -- e1 EIAJ Package Code DIP14-P-300-2.54 D A2 Symbol e JEITA Package Code P-SOP14-5.3x10.1-1.27 RENESAS Code PRSP0014DD-A b1 Previous Code 14P2N-A b MASS[Typ.] 0.2g 8 *1 E 14 HE A A1 A2 b b1 c D E e e1 L A1 LA SEATING PLANE Dimension in Millimeters Min Nom Max 4.5 -- -- 0.51 -- -- 3.3 -- -- 0.4 0.5 0.6 1.4 1.5 1.8 0.22 0.27 0.34 19.0 19.2 18.8 6.15 6.3 6.45 2.54 -- -- 7.62 -- -- 3.0 -- 15 0 -- F NOTE) 1. DIMENSIONS "*1" AND "*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION "*3" DOES NOT INCLUDE TRIM OFFSET. 1 7 Index mark c *2 D A1 e y *3 L A A2 bp Detail F R03DS0043EJ0400 Rev.4.00 Jun 03, 2011 Reference Symbol D E A2 A1 A bp c HE e y L Dimension in Millimeters Min Nom Max 10.0 10.1 10.2 5.2 5.3 5.4 1.8 0.1 0.2 0 2.1 0.35 0.4 0.5 0.18 0.2 0.25 0 8 7.5 7.8 8.1 1.12 1.27 1.42 0.1 0.4 0.6 0.8 Page 8 of 9 M62354P/FP/GP Preliminary JEITA Package Code P-LSSOP16-4.4x5-0.65 RENESAS Code PLSP0016JA-A MASS[Typ.] 0.06g 9 E 16 NOTE) 1. DIMENSIONS "*1" AND "*2" DO NOT INCLUDE MOLD FLASH. 2. DIMENSION "*3" DOES NOT INCLUDE TRIM OFFSET. *1 HE Previous Code 16P2E-A F 1 8 Index mark c A2 A1 Reference Dimension in Millimeters Symbol *2 A L D *3 e y bp Detail F D E A2 A A1 bp c HE e y L R03DS0043EJ0400 Rev.4.00 Jun 03, 2011 Min 4.9 4.3 Nom Max 5.0 5.1 4.4 4.5 1.15 1.45 0 0.1 0.2 0.17 0.22 0.32 0.13 0.15 0.2 0 10 6.2 6.4 6.6 0.53 0.65 0.77 0.10 0.3 0.5 0.7 Page 9 of 9 Notice 1. All information included in this document is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas Electronics products listed herein, please confirm the latest product information with a Renesas Electronics sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas Electronics such as that disclosed through our website. 2. Renesas Electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rights of third parties by or arising from the use of Renesas Electronics products or technical information described in this document. No license, express, implied or otherwise, is granted hereby under any patents, copyrights or other intellectual property rights of Renesas Electronics or others. 3. You should not alter, modify, copy, or otherwise misappropriate any Renesas Electronics product, whether in whole or in part. 4. Descriptions of circuits, software and other related information in this document are provided only to illustrate the operation of semiconductor products and application examples. You are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. Renesas Electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 5. When exporting the products or technology described in this document, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. You should not use Renesas Electronics products or the technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. Renesas Electronics products and technology may not be used for or incorporated into any products or systems whose manufacture, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. 6. Renesas Electronics has used reasonable care in preparing the information included in this document, but Renesas Electronics does not warrant that such information is error free. Renesas Electronics 7. Renesas Electronics products are classified according to the following three quality grades: "Standard", "High Quality", and "Specific". The recommended applications for each Renesas Electronics product assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information included herein. depends on the product's quality grade, as indicated below. You must check the quality grade of each Renesas Electronics product before using it in a particular application. You may not use any Renesas Electronics product for any application categorized as "Specific" without the prior written consent of Renesas Electronics. Further, you may not use any Renesas Electronics product for any application for which it is not intended without the prior written consent of Renesas Electronics. Renesas Electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any Renesas Electronics product for an application categorized as "Specific" or for which the product is not intended where you have failed to obtain the prior written consent of Renesas Electronics. The quality grade of each Renesas Electronics product is "Standard" unless otherwise expressly specified in a Renesas Electronics data sheets or data books, etc. "Standard": Computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots. "High Quality": Transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; anti-crime systems; safety equipment; and medical equipment not specifically designed for life support. "Specific": Aircraft; aerospace equipment; submersible repeaters; nuclear reactor control systems; medical equipment or systems for life support (e.g. artificial life support devices or systems), surgical implantations, or healthcare intervention (e.g. excision, etc.), and any other applications or purposes that pose a direct threat to human life. 8. You should use the Renesas Electronics products described in this document within the range specified by Renesas Electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas Electronics shall have no liability for malfunctions or damages arising out of the use of Renesas Electronics products beyond such specified ranges. 9. Although Renesas Electronics endeavors to improve the quality and reliability of its products, semiconductor products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Further, Renesas Electronics products are not subject to radiation resistance design. Please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas Electronics product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measures. Because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 10. Please contact a Renesas Electronics sales office for details as to environmental matters such as the environmental compatibility of each Renesas Electronics product. Please use Renesas Electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, including without limitation, the EU RoHS Directive. Renesas Electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 11. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written consent of Renesas Electronics. 12. Please contact a Renesas Electronics sales office if you have any questions regarding the information contained in this document or Renesas Electronics products, or if you have any other inquiries. (Note 1) "Renesas Electronics" as used in this document means Renesas Electronics Corporation and also includes its majority-owned subsidiaries. (Note 2) "Renesas Electronics product(s)" means any product developed or manufactured by or for Renesas Electronics. http://www.renesas.com SALES OFFICES Refer to "http://www.renesas.com/" for the latest and detailed information. Renesas Electronics America Inc. 2880 Scott Boulevard Santa Clara, CA 95050-2554, U.S.A. Tel: +1-408-588-6000, Fax: +1-408-588-6130 Renesas Electronics Canada Limited 1101 Nicholson Road, Newmarket, Ontario L3Y 9C3, Canada Tel: +1-905-898-5441, Fax: +1-905-898-3220 Renesas Electronics Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K Tel: +44-1628-585-100, Fax: +44-1628-585-900 Renesas Electronics Europe GmbH Arcadiastrasse 10, 40472 Dusseldorf, Germany Tel: +49-211-65030, Fax: +49-211-6503-1327 Renesas Electronics (China) Co., Ltd. 7th Floor, Quantum Plaza, No.27 ZhiChunLu Haidian District, Beijing 100083, P.R.China Tel: +86-10-8235-1155, Fax: +86-10-8235-7679 Renesas Electronics (Shanghai) Co., Ltd. Unit 204, 205, AZIA Center, No.1233 Lujiazui Ring Rd., Pudong District, Shanghai 200120, China Tel: +86-21-5877-1818, Fax: +86-21-6887-7858 / -7898 Renesas Electronics Hong Kong Limited Unit 1601-1613, 16/F., Tower 2, Grand Century Place, 193 Prince Edward Road West, Mongkok, Kowloon, Hong Kong Tel: +852-2886-9318, Fax: +852 2886-9022/9044 Renesas Electronics Taiwan Co., Ltd. 13F, No. 363, Fu Shing North Road, Taipei, Taiwan Tel: +886-2-8175-9600, Fax: +886 2-8175-9670 Renesas Electronics Singapore Pte. Ltd. 1 harbourFront Avenue, #06-10, keppel Bay Tower, Singapore 098632 Tel: +65-6213-0200, Fax: +65-6278-8001 Renesas Electronics Malaysia Sdn.Bhd. Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No. 18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: +60-3-7955-9390, Fax: +60-3-7955-9510 Renesas Electronics Korea Co., Ltd. 11F., Samik Lavied' or Bldg., 720-2 Yeoksam-Dong, Kangnam-Ku, Seoul 135-080, Korea Tel: +82-2-558-3737, Fax: +82-2-558-5141 (c) 2011 Renesas Electronics Corporation. All rights reserved. Colophon 1.1