• 221 West Industr y Court 3 Deer Par k, NY 11729-4681 3 (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web Si te - http:// www.se nsitron.com • E-Mail Address - sales@sensit r on.com •
SPxxxxSA/B/C-G
Technical Data
Data Sheet 1258, Rev. -
TWO TERMINAL THYRISTOR SERIES
SURFACE MOUNT SMB AND AXIAL LEAD DO-15
TWO TERMINAL THYRISTOR SURGE SUPPRESSOR
FEATURES:
·UL94V-0 Flammability Classification ·Peak Off-State Voltage from 90 to 360 volts
·ESD Protection >40 kilovolts ·Meet IEC61000-4-4 & -5 Industry Requirement
·Low Capacitance for T1/E1 Trunk and Line ·Provides Protection in Accordance with FCC
Card Application Part 68,UL1459,Bellcore 1089,ITU-TK. 20 & K. 21
·High Surge Current Capability
(See Electrical Characteristics)
DO-204AC (DO-15) DO-214AA (SMB J-Bend)
MECHANICAL DATA MECHANICAL DATA
Case: JEDEC DO-15 Molded plastic over Case: JEDEC DO-214AA Molded plastic over
passivated Junction passivated junction
Terminals: Tin Plated Axial leads, solderable per Terminal: Solder plated, solderable per
MIL-STD-750, Method 2026 MIL-STD-750, Method 2026
Mounting Position: Any Standard Packaging: 12mm tape
(EIA STD RS-481)
Weight: 0.015 ounce, 0.4 gram Weight: 0.003 ounce, 0.093 gram
1.0 (25.4)
MIN.
0.140 (3.6)
0.104 (2.6)
DIA.
0.034 (0.86)
0.028 (0.71)
DIA.
Dimensions in inches and(millimeters)
0.300 (7.6)
0.230 (5.8)
1.0 (25.4)
MIN.
0.155 (3.94)
0.130 (3.30)
0.086 (2.20)
0.077 (1.95)
0.180 (4.57)
0.160 (4.06)
0.096 (2.44)
0.084 (2.13)
0.220 (5.59)
0.205 (5.21)
0.060 (1.52)
0.030 (0.76)
Dimensions in inches and(millimeters)
0.012 (0.305)
0.006 (0.152)
0.008 (0.203) MAX.
Green Products
· Green Products in Compliance with the RoHS Directive
SENSITRON
SEMICONDUCTOR
SENSITRON
SEMICONDUCTOR
• 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web Site - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •
SPxxxxSA/B/C-G
Data Sheet 1258, Rev.-
MARKING CODE
PART
NUMBER
FOR AXIAL
DO-15
PACKAGE
FOR SMB
PACKAGE
REPETITEVE
PEAK
OFF-STAGE
VOLTAGE
VDRM
(VOLTS)
SWITCHING
VOLTAGE
@100V/us
Vs
(VOLTS)
MINIMUM
HOLDING
CURRENT
dl/dt=1A/ms
IH
(mA)
SWITCHING
CURRENT
Is
(mA)
SURGE
RATINGS
IPP
10*1000µS
(Amps)
ON-STAGE
CURRENT
IT
(A)
TYPICAL
CAPACITANCE
@50V,1MHz
(pF)
SP1100SA-G SP1100SAL-G GF 90 130 150 800 50 1 60
SP1300SA-G
SP1500SA-G
SP1800SA-G
SP2300SA-G
SP1300SAL-G
SP1500SAL-G
SP1800SAL-G
SP2300SAL-G
GG
GH
GI
GJ
120
140
160
190
160
180
220
260
150
150
150
150
800
800
800
800
50
50
50
50
1
1
1
1
40
40
40
30
SP2600SA-G
SP3100SA-G
SP3500SA-G
SP4000SA-G
SP2600SAL-G
SP3100SAL-G
SP3500SAL-G
SP4000SAL-G
GK
GL
GM
GO
220
275
300
360
300
350
400
450
150
150
150
150
800
800
800
800
50
50
50
50
1
1
1
1
30
30
30
30
SP1100SB-G SP1100SBL-G GS 90 130 150 800 80 1 100
SP1300SB-G
SP1500SB-G
SP1800SB-G
SP2300SB-G
SP1300SBL-G
SP1500SBL-G
SP1800SBL-G
SP2300SBL-G
GT
GU
GV
GW
120
140
160
190
160
180
220
260
150
150
150
150
800
800
800
800
80
80
80
80
1
1
1
1
70
70
70
50
SP2600SB-G
SP3100SB-G
SP3500SB-G
SP4000SB-G
SP2600SBL-G
SP3100SBL-G
SP3500SBL-G
SP4000SBL-G
GX
GY
GZ
GN
220
275
300
360
300
350
400
450
150
150
150
150
800
800
800
800
80
80
80
80
1
1
1
1
50
40
40
40
SP1100SC-G SP1100SCL-G HF 90 130 150 800 100 1 100
SP1300SC-G
SP1500SC-G
SP1800SC-G
SP2300SC-G
SP1300SCL-G
SP1500SCL-G
SP1800SCL-G
SP2300SCL-G
HG
HH
HI
HJ
120
140
160
190
160
180
220
260
150
150
150
150
800
800
800
800
100
100
100
100
1
1
1
1
70
70
70
50
SP2600SC-G
SP3100SC-G
SP3500SC-G
SP4000SC-G
SP2600SCL-G
SP3100SCL-G
SP3500SCL-G
SP4000SCL-G
HK
HL
HM
HS
220
275
300
360
300
350
400
450
150
150
150
150
800
800
800
800
100
100
100
100
1
1
1
1
50
40
40
40
Maximum Off–State Current @ VDRM : 5 µA
Maximum On-State Voltage @ IT : 5 Volts
For AXIAL devices, use suffix L (e.g. P3100SAL). Electrical characteristics apply in both AXIAL and Surface Mounted Devices.
Fig.1 Pulse Wave Form Example
0
50
100
0 1000 2000 3000
t - Time - µs
IPP – Peak Pulse Current - %IPP
Test
Waveform
Example
tr 10 µs
td = 1000 µs
Half Value: IPP / 2 = td
Peak Value
e
-1
tr
Fig.2 Typical Peak O ff-State Current vs Junction
Temperature
0.01
0.1
1
10
-40 0 40 80 120
tj - Tem perature - C
IDRM - Peak Off-State Current - 礎
Green Products
SENSITRON
SEMICONDUCTOR
• 221 West Industr y Court 3 Deer Par k, NY 11729-4681 3 (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web Si te - http:// www.se nsitron.com • E-Mail Address - sales@sensit r on.com •
SPxxxxSA/B/C-G
Data Sheet 1258, Rev. -
Fig.3 Typical On-State Current vs On-State Voltage
1
10
100
01234567
VT - On-State Voltage - V
IT - On-State Current - A
SPxxxxSA-G
SPxxxxSC-G
SPxxxxSB-G
Fig.4 Typical Holding Current Vs Junction Temper at ur e
0
0.5
1
1.5
2
2.5
-40 0 40 80 120
tj- Temperature - C
IH / IH (tj 25 )
Fig.5 Typical normalized VS vs Junction Temperature
0.8
0.85
0.9
0.95
1
1.05
1.1
1.15
-40 0 40 80 120
tj - Temperature -C
Normalized Vs
Fig.6 O n- S t a t e C urre nt v s S urge C urre nt
1
10
100
1 10 100 1000
Surge Current Duration - Full Cycles
Non-Repetitive On-State Current (I
TSM
)
(Amps)
Supply Frequency: 60Hz Sinus oidal
Load: Res istive
Rms On-State Current(I
T(RMS)
):
Maximum
SPxxxxSA-G
SPxxxxSC-G
SPxxxxSB-G
IPP
ITSM
IT
IS
IH
IRM
VTVRM
VS
Fig.7 V - I Characteristics Curve
Green Products
• 221 West Industry Court ! Deer Park, NY 11729-4681 ! (631) 586-7600 FAX (631) 242-9798 •
• World Wid e We b Site - http: //www.sensitron.com • E-Mail Address - sales@sensit ron.com •
Data Sheet 1258, Rev. –
SENSITRON
SEMI CONDUCTOR
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior not ice to improve
product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest
version of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from
use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed writ ten permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations.
SPxxxxSA/B/C-G
Green Products
• 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 •
• World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •
SENSITRON
SEMICONDUCTOR
TECHNICAL DATA
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version
of the datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment,
medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by
means of users’ fail-safe precautions or other arrangement.
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during
operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual
property claims or any other problems that ma y result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from
use at a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of
Sensitron Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will
hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third
party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and
regulations.
