JH-114PIN - M/A-COM Technology Solutions, Inc.

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and prod uct information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

Quadrature Hybrid,

20 - 40 MHz

Rev. V3

JH- / JHS-114 / JH-133

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Features

• Octave Bandwidth

• 3o Maximum Phase Deviation from 90o

• Low Loss: 0.5 dB Max.

• Impedance: 50 Ohms Nominal

• Input Power: 5 Watts Max.@ 25°C, Derated to 1

Watt @ 100oC

• Typical Phase Linearity: 3o from Straight Line

• MIL-STD-202 Screening Available

Description

3 dB Hybrids are ideal for dividing a signal into two

signals of equal amplitude and a constant 90o or

180o phase differential and for Quad rature

combining or performing summation/differential

combining.

FP-2 (JH-114)

SF-1 (JHS-114)

TO-8-2 (JH-133)

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and prod uct information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

Quadrature Hybrid,

20 - 40 MHz

Rev. V3

JH- / JHS-114 / JH-133

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Electrical Specifications1: TA = -55°C to +85°C

Parameter Test Conditions Frequency Units Min Typ Max

Insertion Loss 2 Less Coupling 20 - 40 MHz dB — — 0.5

Isolation — 20 - 40 MHz dB 20 — —

Amplitude Balance — 20 - 40 MHz dB — — 0.75

VSWR — 20 - 40 MHz Ratio — — 1.2:1

Deviation from

Quadrature — 20 - 40 MHz ° — — 3

1. All specifications apply with 50 ohm source and load impedance.

2. Average of coupled output less 3 dB.

This product contains elements protected by United States Patent Number 3,484,724.

Phasing Diagram

OUT

IN A B C D

A ISO 0° -90°

B ISO -90° 0°

C 0° 90° ISO

D -90° 0° ISO

Pin Configuration (JH-114)

Pin No. Function Pin No. Function

1 A 5 D

2 GND 6 GND

3 GND 7 GND

4 B 8 C

Pin Configuration (JHS-114)

Pin No. Function Pin No. Function

1 A 3 D

2 B 4 C

Pin Configuration (JH-133)

Pin No. Function Pin No. Function

1 GND 7 GND

2 B 8 D

3 GND 9 GND

4 GND 10 GND

5 A 11 C

6 GND 12 GND

All other pins and case are ground.

• North America Tel: 800.366.2266 • Europe Tel: +353.21.244.6400

• India Tel: +91.80.4155721 • China Tel: +86.21.2407.1588

Visit www.macomtech.com for additional data sheets and prod uct information.

M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make

changes to the product(s) or information contained herein without notice.

Quadrature Hybrid,

20 - 40 MHz

Rev. V3

JH- / JHS-114 / JH-133

ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions

is considering for development. Performance is based on target specifications, simulated results,

and/or prototype measurements. Commitment to develop is not guaranteed.

PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology

Solutions has under development. Performance is based on engineering tests. Specifications are

typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available.

Commitment to produce in volume is not guaranteed.

Typical Performance Curves

Ordering Information

Part Number Package

JH-114 PIN FP-2

JHS-114 PIN SF-1

JH-133 PIN TO-8-2