DC-DC CONVERTERS POLA Non-isolated 1
NEW Product
File Name: pth03060.pdf Rev: 28 Jun 2006
2YEAR WARRANTY
All specifications aretypical at nominal input, full load at 25 °C unless otherwise stated
Cin =330 µF, Cout = 0 µF SPECIFICATIONS
The
PTH03060
is a next generation series of non-isolated dc-dc converters offering some
of the most advanced POL features available in the industry. The primary new feature
provides for sequencing between multiple modules, a function, which is becoming a
necessity for powering advanced silicon including DSP’s, FPGA’s and ASIC’s requiring
controlled power-up and power down. Other industry leading features include margin
up/down controls, pre-bias start-up capability and efficiencies up to 93%. The
PTH03060
has an input voltage of
2.95 Vdc to 3.65 Vdc
and offers a wide
0.8 Vdc to 2.5 Vdc
output
voltage range with up to 10 A output current, which allows for maximum design flexibility
and a pathway for future upgrades.
•10 A output current
•3.3 V input voltage
•Wide-output voltage adjust (0.8 Vdc to 2.5 Vdc)
•Auto-track™ sequencing*
•Margin up/down controls
•Pre-bias start-up capability
•Efficiencies up to 93%
•Output ON/OFF inhibit
•Output voltage sense
•Point-of-Load-Alliance (POLA) compatible
•Available RoHS compliant
*Auto-track™ is a trade mark of
Texas Instruments
PTH03060
3.3 Vin single output
OUTPUT SPECIFICATIONS
Voltage adjustability (See Note 4) 0.8-2.5 Vdc
Setpoint accuracy ±2.0% Vo
Line regulation ±10 mV typ.
Load regulation ±12 mV typ.
Total regulation ±3.0% Vo
Minimum load 0 A
Ripple and noise 20 MHz bandwidth 20 mV pk-pk
Temperature co-efficient -40 ºC to +85 ºC ±0.5% Vo
Transient response 70 µs recoverytime
(See Note 5) Overshoot/undershoot 100 mV
Margin adjustment ±5.0% Vo
INPUT SPECIFICATIONS
Input voltage range (See Note 3) 2.95-3.65 Vdc
Input current No load 10 mA typ.
Remote ON/OFF (See Note 1) Positive logic
Start-up time 1 V/ms
Undervoltage lockout 2.8-2.95 Vdc typ.
Track input voltage Pin 8 (See Note 6, 7) ±0.3 Vin
International Safety Standard Approvals
UL/cUL CAN/CSA-C22.2 No. 60950-1-03/UL 60950-1,
File No. E174104
TÜV Product Service (EN60950) Certificate No. B 04 06 38572 044
CB Report and Certificate to IEC60950, Certificate No.
US/8292/UL
EMC CHARACTERISTICS
Electrostatic discharge EN61000-4-2, IEC801-2
Conducted immunity EN61000-4-6
Radiated immunity EN61000-4-3
GENERAL SPECIFICATIONS
Efficiency (See Efficiency Table) 93% max.
Insulation voltage Non-isolated
Switching frequency 300 kHz typ. ±25 kHz
Approvals and EN60950
standards UL/cUL60950
Material flammability UL94V-0
Dimensions (L x W x H) 25.27 x 15.75 x 9.00 mm
0.995 x 0.620 x 0.354 in
Weight 3.7 g (0.13 oz)
MTBF Telcordia SR-332 7,092,000 hours
ENVIRONMENTAL SPECIFICATIONS
Thermal performance Operating ambient, -40 ºC to +85 ºC
(See Note 2) temperature
Non-operating -40 ºC to +125 ºC
MSL (‘Z’ suffix only) JEDEC J-STD-020C Level 3
PROTECTION
Short-circuit Auto reset 20 A typ.
File Name: pth03060.pdf Rev: 28 Jun 2006
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
DC-DC CONVERTERS POLA Non-isolated 2
NEW Product
NNootteess
1Remote ON/OFF. Positive Logic
ON: Pin 3 open; or V > Vin - 0.5 V
OFF: Pin 3 GND; or V < 0.8 V (min - 0.2 V).
2See Figure 1 for safe operating curve.
3A 330 µF electrolytic input capacitor is required for proper operation. The
capacitor must be rated for a minimum of 700 mA rms of ripple current.
4An external output capacitor is not required for basic operation. Adding
330 µF of distributed capacitance at the load will improve the transient
response.
51 A/µs load step, 50 to 100% Iomax, Cout = 330 µF.
6If utilized Vout will track applied voltage by ±0.3 V (up to Vo set point).
7The pre-bias start-up feature is not compatible with Auto-Track™. This is
because when the module is under Auto-Track™control, it is fully active
and will sink current if the output voltage is below that of a back-feeding
source. Therefore to ensure a pre-bias hold-off, one of the following two
techniques must be followed when input power is first applied to the
module. The Auto-Track™function must either be disabled, or the
module’s output held off using the Inhibit pin. Refer to Application Note
154 for more details.
8Tape and reel packaging only available on the surface-mount versions.
9To order Pb-free (RoHS compatible) surface-mount parts replace the
mounting option ‘S’ with ‘Z’, e.g. PTH03060WAZ. To order Pb-free
(RoHS compatible) through-hole parts replace the mounting option ‘H’
with ‘D’, e.g. PTH03060WAD.
10 NOTICE: Some models do not support all options. Please contact your
local Artesyn representative or use the on-line model number search tool at
http://www.artesyn.com/powergroup/products.htm to find a suitable
alternative.
OUTPUT INPUT OUTPUT OUTPUT OUTPUT EFFICIENCY REGULATION MODEL
POWER VOLTAGE VOLTAGE CURRENT CURRENT (MAX.) LINE LOAD NUMBER (9,10)
(MAX.) (MIN.) (MAX.)
25 W 2.95-3.65 Vdc 0.8-2.5 Vdc 0 A 10 A 93% ±10 mV ±12 mV PTH03060
EFFICIENCY TABLE (IO= 7 A)
OUTPUT VOLTAGE EFFICIENCY
Vo = 1.0 V 85%
Vo = 1.2 V 87%
Vo = 1.5 V 89%
Vo = 1.8 V 91%
Vo = 2.0 V 92%
Vo = 2.5 V 93%
PTH03060WAST
Part Number System with Options
Product Family
Point of Load Alliance
Compatible
The ultra-wide output voltage trim range offers major advantages to users who
select the PTH03060. It is no longer necessary to purchase a variety of
modules in order to cover different output voltages. The output voltage can be
trimmed in a range of 0.8 Vdc to 2.5 Vdc. When the PTH03060 converter
leaves the factory the output has been adjusted to the default voltage of 0.8 V.
OOuuttppuutt VVoollttaaggee AAddjjuussttmmeenntt ooff tthhee PPTTHH0033006600 SSeerriieess
Output Current
06 = 10 A
Packaging Options
No Suffix = Trays
T = Tape and Reel (8)
Input Voltage
03 = 3.3 V
Mechanical Package
Always 0 Pin Option
A = Through-Hole Std. Pin Length (0.140”)
A = Surface-Mount Tin/Lead Solder Ball
Output Voltage Code
W = Wide
PTH03060
3.3 Vin single output
Mounting Option (9)
D = Horizontal Through-Hole (Matte Sn)
H = Horizontal Through-Hole (Sn/Pb)
S = Surface-Mount (63/37 Sn/Pb
pin solder material)
Z = Surface-Mount (95.5/3.8/0.7 Sn/Ag/Cu
pin solder material)
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
DC-DC CONVERTERS POLA Non-isolated 3
NEW Product
File Name: pth03060.pdf Rev: 28 Jun 2006
EFFICIENCY (%)
OUTPUT CURRENT (A)
2.5V
1.8V
1.2V
0.8V
40
50
60
70
80
90
100
0246810
Vout
TEMPERATURE (ºC)
OUTPUT CURRENT (A)
20
30
40
50
60
80
90
70
0246810
400LFM
200LFM
100LFM
Nat conv
Figure 2 - Efficiency vs Load Current
Vin = 3.3 V (See Note B)
Figure 1 - Safe Operating Area
Vin = 3.3 V, Output Voltage = 2.5 V (See Note A)
NNootteess
ASOA curves represent the conditions at which inter nal components are
within the Artesyn derating guidelines.
BCharacteristic data has been developed from actual products tested at
25 °C. This data is considered typical data for the converter.
Track
8910
PTH03060
(Top View)
Margin Up
Margin Down
543
6
7
2
1
GND GND
L
O
A
D
C
in
330µF
(Required)
+
V
in
Inhibit
C
out
330µF
(Optional)
+
R
SET
1%, 0.1W
(Required)
V
out
V
o
Sense
Figure 3 - Standard Application
PTH03060
3.3 Vin single output
File Name: pth03060.pdf Rev: 28 Jun 2006
Please consult our website for the following items: 4 Application Note www.artesyn.com
Datasheet © Artesyn Technologies
®
2006
The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising
from printing errors or inaccuracies. The information and specifications contained or described herein are subject to change in any manner at any time without notice. No rights under any patent
accompany the sale of any such product(s) or information contained herein.
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
DC-DC CONVERTERS POLA Non-isolated 4
NEW Product
Dimensions in Inches (mm)
Tolerances (unless otherwise specified)
2 Places ±0.030 (±0.76)
3 Places ±0.010 (±0.25)
0.140
(3.55)
0.354 (9.00)
MAX.
Host Board
TOP VIEW
SIDE VIEW
0.995 (25.27)
0.620
6
7
35
4
10 98
1
2
ø
0.040 (1.02)
5 Places.
(15.75)
0.125 (3.18)
0.125 (3.18)
(6.35)
0.250 0.060
(1.52)
0.500
(12.70)
(1.52)
0.060 0.375
(9.52)
0.070 (1.78)
(Standoff Shoulder)
Lowest Component
0.010 min. (0.25)
Bottom side Clearance
Dimensions in Inches (mm)
Tolerances (unless otherwise specified)
2 Places ±0.030 (±0.76)
3 Places ±0.010 (±0.25)
SIDE VIEW
Solder Ball
0.040 (1.02)
10 Places
TOP VIEW
0.995 (25.27)
0.620
6
7
35
4
10 98
1
2
(15.75)
0.125 (3.18)
0.125 (3.18)
(6.35)
0.250 0.060
(1.52)
0.500
(12.70)
(1.52)
0.060 0.375
(9.52)
*After solder reflow
on customer board
0.354 (9.00)
max.*
Figure 1 - Plated Through-Hole Mechanical Drawing
Figure 2 - Surface-Mount Mechanical Drawing
*Denotes negative logic:
Open = Normal operation
Ground = Function active
PIN CONNECTIONS
PIN NO. FUNCTION
1 Ground
2Vin
3 Inhibit*
4 Vo adjust
5 Vo sense
6 Vout
7 Ground
8 Track
9Margin down*
10 Margin up*
PTH03060
3.3 Vin single output
