BOOSTCAP ULTRACAPACITOR (R) DATASHEET 125V HEAVY TRANSPORTATION MODULES FEATURES AND BENEFITS TYPICAL APPLICATIONS CAN bus digital monitoring and communications Highest power performance available Over 1,000,000 duty cycles Temperature and voltage monitoring Ultra-low resistance Buses Electric trains and trolleys Heavy duty transportation Cranes, RTGS Utility vehicles Mining equipment PRODUCT SPECIFICATIONS ELECTRICAL Rated Capacitance 1 Minimum Capacitance, initial Maximum ESR DC, initial 1 1 Rated Voltage Absolute Maximum Voltage BMOD0063 P125 B04/B08 BMOD0063 P125 B03 63 F 63 F 63 F 63 F 18 m 18 m 128 V 128 V 136 V 136 V 2 140 ARMS 140 ARMS Maximum Continuous Current (T = 40oC)2 240 ARMS 240 ARMS Maximum Peak Current, 1 second 1,900 A 1,900 A 10 mA 10 mA N/A N/A 1,500 V 1,500 V Minimum -40oC -40oC Maximum 65oC 65oC Minimum -40oC -40oC Maximum 70oC 70oC 15 Maximum Continuous Current (T = 15 C) o 3 Leakage Current, maximum (VMS 2.0) 4 Leakage Current, maximum (Passive Balancing) 4 Maximum Series Voltage TEMPERATURE Operating Temperature (Ambient temperature) Storage Temperature (Stored uncharged) (R) Page 1 Document number: 1014696.3 maxwell.com BOOSTCAP ULTRACAPACITOR (R) DATASHEET 125V HEAVY TRANSPORTATION MODULES PRODUCT SPECIFICATIONS (Cont'd) PHYSICAL BMOD0063 P125 B04/B08 BMOD0063 P125 B03 60.5 kg 60.5 kg Radsok Radsok N/A N/A ISO16750-3 Table 14 ISO16750-3 Table 14 SAE J2464 SAE J2464 IP65 IP65 Forced Air Forced Air RTD RTD Temperature Interface Serial Data (CAN) Analog Cell Voltage Monitoring Group Voltage (CAN) Analog Deutsch DTM 5 Pin VMS 2.0 VMS 2.0 1,800 W/kg 1,800 W/kg Mass, typical 13 Power Terminals Recommended Torque - Terminal Vibration Specification Shock Specification Environmental Protection Cooling MONITORING / CELL VOLTAGE MANAGEMENT Internal Temperature Sensor Connector Cell Voltage Management POWER & ENERGY Usable Specific Power, Pd5 Impedance Match Specific Power, Pmax 3,800 W/kg 3,800 W/kg Specific Energy, Emax7 2.4 Wh/kg 2.4 Wh/kg Stored Energy 143.4 Wh 143.4 Wh High Temperature1 1,500 hours 1,500 hours Capacitance Change 20% 20% ESR Change 100% 100% Room Temperature1 10 years 10 years Capacitance Change 20% 20% ESR Change 100% 100% Cycle Life1,9 1,000,000 cycles 1,000,000 cycles Capacitance Change 20% 20% ESR Change 100% 100% Test Current 100 A 100 A 6 8 LIFE (at Rated Voltage & Maximum Operating Temperature) (% decrease from minimum initial value) (% increase from maximum initial value) (at Rated Voltage & 25oC) (% decrease from minimum initial value) (% increase from maximum initial value) (% decrease from minimum initial value) (% increase from maximum initial value) (R) Page 2 Document number: 1014696.3 maxwell.com BOOSTCAP ULTRACAPACITOR (R) DATASHEET 125V HEAVY TRANSPORTATION MODULES PRODUCT SPECIFICATIONS (Cont'd) BMOD0063 P125 B04/B08 Shelf Life1,10 BMOD0063 P125 B03 2 years 2 years 7,100 A 7,100 A 4,000 V DC 4,000 V DC RoHS, eMark 72/245/EEC, UN10.03 (B08 only) RoHS 1oC/W 1oC/W Thermal Resistance (Rma, Modulel Case to Ambient), typical 0.01oC/W 0.01oC/W Thermal Resistance (Rca, All Cell Cases to Ambient), typical 0.04oC/W 0.04oC/W 33,370 J/oC 33,370 J/oC (Stored uncharged up to a maximum storage temperature) SAFETY Short Circuit Current, typical (Current possible with short circuit from rated voltage. Do not use as an operating current.) Factory High-Pot Test14 Certifications TYPICAL CHARACTERISTICS THERMAL CHARACTERISTICS Thermal Resistance (Rcm, One Cell Case to Module Case), typical2 Thermal Capacitance (Cth), typical 2 180% Capacitance DC ESR Percentage change from value at 25C 170% 160% 150% 140% 130% 120% 110% 100% 90% 80% -60 -40 -20 0 20 40 60 80 Temperature (C) (R) Page 3 Document number: 1014696.3 maxwell.com BOOSTCAP ULTRACAPACITOR (R) DATASHEET 125V HEAVY TRANSPORTATION MODULES NOTES 1. Capacitance and ESRDC measured at 25C per Document Number 1007239 available at www.maxwell.com. 2. Per Maxwell Document 1007239 available at www.maxwell.com. 1/2 CV 3. Maximum Peak current (1 sec) = C x ESRDC + 1 4. After 72 hours at 25C and rated voltage. Initial leakage current can be higher. 0.12V2 5. Per IEC 62391-2, Pd = ESR x mass DC V2 6. Pmax = 4 x ESRDC x mass 7. Emax = 1/2 CV2 3,600 x mass MOUNTING RECOMMENDATIONS Please refer to the user manual for installation recommendations 8. Estored = 1/2 CV2 9. Cycle per Document Number 10007239 available at www.maxwell.com. 10. No more than 10% decrease in capacitance from minimum initial capacitance or 50% increase in ESR from maximum initial ESR. 11. Tested at 1 kV DC. 12. For a given application, sufficient cooling must be provided to keep cell case temperatures below 65. See Rth. 13. Without fan. With fan, mass is 63.4 kg. 14. Duration = 60 seconds. Not intended as an operating parameter. 15. Absolute maximum voltage non repeated, not to exceed 1 second. MARKINGS Products are marked with the following information: Rated capacitance, rated voltage, product number, name of manufacturer, positive and negative terminal, warning marking, serial number. (R) Page 4 Document number: 1014696.3 maxwell.com BOOSTCAP ULTRACAPACITOR (R) DATASHEET 125V HEAVY TRANSPORTATION MODULES BMOD0063 P125 Bxx Part Description L (0.5mm) Dimensions (mm) W (0.2mm) H (0.7mm) Package Quantity BMOD0063 P125 B03 762 425 265 1 BMOD0063 P125 B04/08 619 425 265 1 Product dimensions are for reference only unless otherwise identified. Product dimensions and specifications may change without notice. Please contact Maxwell Technologies directly for any technical specifications critical to application. All products featured on this datasheet are covered by the following U.S. patents and their respective foreign counterparts: 7511942, 7307830, 7203056, 7180726, 7027290, 7.352.558, 7.295.423, 7.090.946, 7.508.651, 7.492.571, 7.342.770, 6.643.119, 7.384.433, 7.147.674, 7.317.609, 7.495.349, 7.102.877. (R) Page 5 Document number: 1014696.3 maxwell.com BOOSTCAP ULTRACAPACITOR (R) DATASHEET 125V HEAVY TRANSPORTATION MODULES ORDERING INFORMATION Base Module 109120B BMOD0063 P125 B04 63F/125V Module with CAN Comm. 109024B BMOD0063 P125 B08 63F/125V e-mark Module with CAN Comm. 109121B BMOD0063 P125 B03 Standard Module with analog monitoring Power Connection Kit 109131 Power Connection Kit, 90DEG 109132 Power Connection Kit, STRAIGHT Communication Kit 109133 CAN SIGNAL, Deutsch Fan Kit 109134 109093 FAN KIT, 24V Standard FAN KIT, 24V, E-Mark Maxwell Technologies, Inc. Global Headquarters 5271 Viewridge Court, Suite 100 San Diego, CA 92123 USA Tel: +1 858 503 3300 Fax: +1 858 503 3301 Maxwell Technologies SA CH-1728 Rossens Switzerland Tel: +41 (0)26 411 85 00 Fax: +41 (0)26 411 85 05 Maxwell Technologies, GmbH Brucker Strasse 21 D-82205 Gilching Germany Tel: +49 (0)8105 24 16 16 Fax: +49 (0)8105 24 16 19 Maxwell Technologies, Inc. Shanghai Representative Office 13E, CR Times Square 500 Zhangyang Road, Pudong Shanghai 200122, P.R. China Tel: +86 21 5836 8780 Fax: +86 21 5836 8790 (R) Page 6 Document number: 1014696.3 maxwell.com