7810A Coax - RG-8 Type For more information please call 1-800-Belden1 See Put-ups and Colors Description: RG-8 type, 10 AWG solid .108" bare copper-covered aluminum conductor, gas-injected foam HDPE insulation, Duobond(R) II + tinned copper braid shield (95% coverage), polyethylene jacket. PHYSICAL CHARACTERISTICS: CONDUCTOR: Number of Coax 1 Total Number of Conductors 1 RG Type 8/U Series Type RF 400 AWG 10 Stranding Solid Conductor Diameter .108 in. Conductor Material BCCA - Bare Copper Covered Aluminum INSULATION: Insulation Material Gas-injected FHDPE - Foam High Density Polyethylene Insulation Diameter .285 in. OUTER SHIELD: Outer Shield Material Trade Name Duobond(R) II Outer Shield Type Tape/Braid Outer Shield Material : Layer Number 1 Trade Name Bonded Duofoil(R) Type Tape 2 Braid Outer Shield %Coverage 100 % Material % Coverage (%) Bonded Aluminum Foil100 Polyester Tape-Aluminum Foil TC - Tinned Copper 95 OUTER JACKET: Outer Jacket Material PE - Polyethylene OVERALL NOMINAL DIAMETER: Overall Nominal Diameter .403 in. Page 1 of 5 7810A Coax - RG-8 Type MECHANICAL CHARACTERISTICS: Operating Temperature Range -40C To +75C Non-UL Temperature Rating 80C Bulk Cable Weight 77 lbs/1000 ft. Max. Recommended Pulling Tension 150 lbs. Min. Bend Radius (Install) 4 in. APPLICABLE SPECIFICATIONS AND AGENCY COMPLIANCE: APPLICABLE STANDARDS: EU CE Mark (Y/N) No EU RoHS Compliant (Y/N) Yes EU RoHS Compliance Date (mm/dd/yyyy): 01/01/2004 SWEEP TEST: Sweep Testing 100% Sweep tested to 6 GHz. SUITABILITY: Suitability - Outdoor Yes Suitability - Aerial Yes - When supported by a messenger Suitability - Burial Yes Suggested Connectors Mates with 9913 and Land Mobile Radio type connectors. PLENUM/NON-PLENUM: Plenum (Y/N) N ELECTRICAL CHARACTERISTICS: Nom. Characteristic Impedance 50 Ohms Nom. Inductance 0.060 H/ft Nom. Capacitance Conductor to Shield 23.0 pF/ft Nominal Velocity of Propagation 86 % Nominal Delay 1.17 ns/ft Nom. Conductor DC Resistance @ 20 Deg. C 1.34 Ohms/1000 ft Nominal Outer Shield DC Resistance @ 20C 2 Ohms/1000 ft Maximum VSWR : Description Frequency (MHz) Start Frequency (MHz) 5 Nom. Attenuation : Page 2 of 5 Stop Frequency (MHz) 6000 Maximum VSWR 1.25:1 7810A Coax - RG-8 Type Description Frequency (MHz) Start Frequency (MHz) Stop Frequency (MHz) Nom. Attenuation (dB/100 ft.) 0.7 0.9 1.5 1.8 2.7 3.8 5.1 5.6 6.0 6.7 7.5 8.2 9.5 11.1 11.4 Start Frequency (MHz) Stop Frequency (MHz) Max. Attenuation (dB/100 ft.) 0.70 0.93 1.58 1.94 2.83 4.06 5.32 5.98 6.35 7.08 7.97 8.80 10.23 12.00 12.23 30 50 150 220 450 900 1500 1800 2000 2500 3000 3500 4500 5800 6000 Max. Attenuation : Description Frequency (MHz) 30 50 150 220 450 900 1500 1800 2000 2500 3000 3500 4500 5800 6000 Max. Power Rating : Page 3 of 5 7810A Coax - RG-8 Type Description Frequency (MHz) 30 50 150 220 450 900 1500 1800 2000 2500 3000 3500 4500 5800 6000 Max. Operating Voltage - Non-UL Start Frequency (MHz) Stop Frequency (MHz) Max. Power Rating (W) 3427 2588 1428 1195 817 575 437 399 375 334 305 282 247 217 213 300 V RMS NOTES: Notes Belden(R) The Wire in Wireless(R) PUT-UPS AND COLORS: Item Description 7810A 0101000 RF400 WIRELESS 50 OHM COAX PE 7810A 010500 RF400 WIRELESS 50 OHM COAX PE Put-Up (ft.) 1000 Ship Weight (lbs.) 86 Jacket Color BLACK Notes C 500 42.5 BLACK C C = CRATE REEL PUT-UP. Revision Number: 4 Revision Date: 07-08-2005 Page 4 of 5 7810A Coax - RG-8 Type (c) 2005 Belden Wire & Cable Company All Rights Reserved. Although Belden Electronics Division ("Belden") makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described herein are subject to error or omission and to change without notice, and the listing of such information and specifications does not ensure product availability. Belden provides the information and specifications herein on an "AS IS" basis, with no representations or warranties, whether express, statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein. All sales of Belden products are subject to Belden's standard terms and conditions of sale. Belden CDT Electronics Division believes this product to be in compliance with the following environmental regulations: California Proposition 65 Consent Judgment For Wire & Cable Mfgs.(San Francisco Superior Court Nos. 312962 And 320342); EU RoHS (Directive 2002/95/EC, 27-Jan-2003);Material manufactured prior to the compliance date may still be in stock at Belden facilities and in our Distributor's inventory. EU ELV (Directive 2000/53/EC, 18-Sept-2000); EU WEEE (Directive 2002/96/EC, 27-Jan-2003); And EU BFR (Directive 2003/11/EC, 6-Feb-2003). The information provided in this Product Disclosure, and the identification of materials listed as reportable or restricted within the Product Disclosure, is correct to the best of Belden's knowledge, information and belief at the date of its publication. The information provided in the Product Disclosure is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. This Product Disclosure is not to be considered a warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual usage of the product. Page 5 of 5