ZSR SERIES 3.0 to 12 volt fixed positive local voltage regulator Description Features The ZSR Series three terminal fixed positive voltage regulators feature internal circuit current limit and thermal shutdown making the devices difficult to destroy. The devices are available in a high power surface mount package, ideal for applications where space saving is important. The devices are suited to local voltage regulation applications, where problems could be encountered with distributed single source regulation, as well as more general voltage regulation applications. * Output current up to 200mA * Tight initial tolerance of 2.5% * Low 600A quiescent current * -55 to 125C temperature range * No external components * Internal thermal shutdown * Internal short circuit current limit * High power SOT223 package The ZSR Series show performance characteristics superior to other local voltage regulators. The initial output voltage is maintained to within 2.5% with a quiescent current of typically 350A. Output voltage change, with input voltage and load current, is much lower than competitive devices. The ZSR devices are completely stable with no external components. SOT223 Package suffix - G OUT 1 GND 2 IN 3 4 GND Top view Top view - Connect pin 4 to pin 2 or leave pin 4 electrically isolated SOT223 ordering information Order reference Voltage Part marking Status Reel size (inches) Tape width (mm) Quantity per reel ZSR300GTA 3.0V ZSR300 Active 7 12 1000 ZSR330GTA 3.3V ZSR330 Active 7 12 1000 ZSR500GTA 5.0V ZSR500 Active 7 12 1000 ZSR800GTA 8.0V ZSR800 Active 7 12 1000 ZSR1000GTA 10.0V ZSR100 Active 7 12 1000 ZSR1200GTA 12.0V ZSR1200 Active 7 12 1000 Issue 9 - October 2007 (c) Zetex Semiconductors plc 2007 1 www.zetex.com ZSR SERIES Absolute maximum rating Input voltage 20V Power Dissipation (Tamb=25C) Output current (IO) 200mA SOT223 Operating temperature -55 to 125C Storage temperature -65 to 150C Maximum power dissipation for the SOT223 is calculated assuming that the device is mounted on a PCB measuring 2 inches square. 2W Recommended operating conditions Parameter Vin Input Voltage Products Min Max Units ZSR300 5 20 V ZSR330 5.3 20 V ZSR500 7 20 V ZSR800 10 20 V ZSR1000 12 20 V ZSR1200 14 20 V Notes: * The maximum operating input voltage and output current of the device will be governed by the maximum power dissipation of the selected package. Maximum package power dissipation is specified at 25C and must be linearly derated to zero at Tamb=125C. * The following data represents pulse test conditions with junction temperatures as indicated at the initiation of the test. Continuous operation of the devices with the stated conditions might exceed the power dissipation limits of the chosen package. Issue 9 - October 2007 (c) Zetex Semiconductors plc 2007 * The shut down feature of the device operates if its temperature exceeds its design limit as might occur during external faults, short circuits etc. If the regulator is supplied from an inductive source then a large voltage transient, on the regulator input, can result should the shut down circuit operate. It is advised that a capacitor (1F or greater) should be applied across the regulator input to ensure that the maximum voltage rating of the device is not exceeded under shutdown conditions. 2 www.zetex.com ZSR SERIES Electrical characteristics ZSR300 test conditions (Unless otherwise stated):Tj=25C, IO=100mA, Vin=7V Symbol VO Parameter Output Voltage Conditions IO=1 to 200mA() Min. 2.92 2.88 Vin=5 to 20V 2.88 Typ. 3.0 Max. 3.08 3.12 Units V V 3.12 V IO =1 to 100mA() VO Line regulation Vin=5 to 20V 10 40 mV VO Load regulation IO=1 to 200mA 5 25 mV 2 Ig Quiescent current IO=1 () Ig Quiescent current change IO=1 to 200mA Vin=1 to 20V to 100mA 350 Vn Output noise voltage f=10Hz to 10Hz Vin/VO Ripple rejection Vin=1 to 20V Vin Input voltage required to maintain regulation Average temperature coefficient of VO 48 mV 600 A 100 A 100 A 75 V rms 62 dB 4.7 V 0.1 mV/C f=120Hz VO/T IO=5.0mA() ZSR330 test conditions (Unless otherwise stated):Tj=25C, IO=100mA, Vin=7.3V Symbol VO Parameter Output Voltage Conditions IO=1 to 200mA() Min. 3.218 3.168 Vin=5.3 to 20V 3.168 IO =1 to Typ. 3.3 Max. 3.382 3.432 Units V V 3.432 V 100mA() VO Line regulation Vin=5.3 to 20V 7.5 30 mV VO Load regulation IO=1 to 200mA 5 25 mV IO=1 to 100mA 2 Ig Quiescent current () Ig Quiescent current change IO=1 to 200mA 100 A Vin=5.3 to 20V 100 A 350 Vn Output noise voltage f=10Hz to 10Hz Vin/VO Ripple rejection Vin=6.3 to 18V 50 mV 600 A 50 V rms 64 dB 5 V f=120Hz Vin VO/T NOTES: ()Tj=-55 Input voltage required to maintain regulation Average temperature coefficient of VO IO=5.0mA() 0.1 mV/C to 125C Issue 9 - October 2007 (c) Zetex Semiconductors plc 2007 3 www.zetex.com ZSR SERIES ZSR500 test conditions (Unless otherwise stated):Tj=25C, IO=100mA, Vin=9V Symbol VO Parameter Output Voltage Conditions IO=1 to 200mA() Vin=7 to 20V Min. 4.875 4.8 Typ. 5 4.8 Max. 5.126 5.2 Units V V 5.2 V IO =1 to 100mA() VO Line regulation Vin=7 to 20V 10 40 mV VO Load regulation IO=1 to 200mA 5 25 mV IO=1 to 100mA 2 Ig Quiescent current Ig Quiescent current change IO=1 to 200mA Vin=7 to 20V 350 () Vn Output noise voltage f=10Hz to 10Hz Vin/VO Ripple rejection Vin=8 to 18V Vin Input voltage required to maintain regulation Average temperature coefficient of VO mV 600 A 100 A 100 A 75 V rms 48 62 dB 7 6.7 V 0.1 mV/C f=120Hz VO/T IO=5.0mA() ZSR800 test conditions (Unless otherwise stated):Tj=25C, IO=100mA, Vin=12V Symbol VO Parameter Output Voltage Conditions IO=1 to 200mA() Min. 7.8 7.68 Vin=10 to 20V 7.68 IO =1 to Typ. 8 Max. 8.25 8.32 Units V V 8.32 V 100mA() VO Line regulation Vin=10 to 20V 11 40 mV VO Load regulation IO=1 to 200mA 8 30 mV IO=1 to 100mA 3 Ig Quiescent current Ig Quiescent current change IO=1 to 200mA Vin=10 to 20V 350 () Vn Output noise voltage f=10Hz to 10Hz Vin/VO Ripple rejection Vin=11 to 18V Vin Input voltage required to maintain regulation Average temperature coefficient of VO 44 mV 600 A 100 A 100 A 115 V rms 60 dB 9.7 V 0.25 mV/C f=120Hz VO/T NOTES: ()Tj=-55 IO=5.0mA() to 125C Issue 9 - October 2007 (c) Zetex Semiconductors plc 2007 4 www.zetex.com ZSR SERIES ZSR1000 test conditions (Unless otherwise stated):Tj=25C, IO=100mA, Vin=14V Symbol VO Parameter Output Voltage Conditions IO=1 to 200mA() Vin=12 to 20V IO =1 to Min. 9.75 9.6 Typ. 10 9.6 Max. 10.25 10.4 Units V V 10.4 V 100mA() VO Line regulation Vin=12 to 20V 12 40 mV VO Load regulation IO=1 to 200mA 9 30 mV IO=1 to 100mA 3 Ig Quiescent current () Ig Quiescent current change IO=1 to 200mA Vn Output noise voltage f=10Hz to 10Hz Vin/VO Ripple rejection Vin=13 to 18V 350 Vin=12 to 20V mV 600 A 100 A 100 43 A 150 V rms 57 dB f=120Hz Input voltage required to maintain regulation Average temperature coefficient of VO Vin VO/T IO=5.0mA() 11.7 V 0.25 mV/C ZSR1200 test conditions (Unless otherwise stated):Tj=25C, IO=100mA, Vin=16V Symbol VO Parameter Output Voltage Conditions IO=1 to 200mA() Min. 11.7 11.52 Vin=14 to 20V 11.52 IO =1 to VO Line regulation VO Load regulation Typ. 12 Max. 12.3 12.48 Units V V 12.48 V 100mA() Vin=14 to 20V 12 40 IO=1 to 200mA 9 30 IO=1 to 100mA 3 Ig Quiescent current Ig Quiescent current change IO=1 to 200mA Vin=14 to 20V 350 () Vn Output noise voltage f=10Hz to 10Hz Vin/VO Ripple rejection Vin=15 to 18V 43 mV mV mV 600 A 100 A 100 A 150 V rms 57 dB f=120Hz Vin VO/T NOTES: ()Tj=-55 Input voltage required to maintain regulation Average temperature coefficient of VO IO=5.0mA() 13.7 V 0.25 mV/C to 125C Issue 9 - October 2007 (c) Zetex Semiconductors plc 2007 5 www.zetex.com ZSR SERIES Schematic diagram Applications Issue 9 - October 2007 (c) Zetex Semiconductors plc 2007 6 www.zetex.com ZSR SERIES Typical characteristics Issue 9 - October 2007 (c) Zetex Semiconductors plc 2007 7 www.zetex.com ZSR SERIES Typical characteristics 5.72 ZSR300 3.00 5.70 2.99 5.68 2.98 Output Voltage (V) Output Voltage (V) 3.01 Io= 5mA Vin= Vo+ 4V 2.86 2.85 5.66 Io= 5mA Vin= Vo+ 4V 4.00 3.98 2.84 2.82 3.96 ZSR400 ZSR285 3.94 -50 -25 0 25 50 75 100 125 -50 -25 50 100 125 75 450 9.08 ZSR900 Io= 0 Vin=Vo+ 4V Io= 5mA Quiescent Current (mA) Vin= Vo+ 4V Output Voltage (V) 25 Output Voltage Temperature Coefficient Output Voltage Temperature Coefficient 9.04 9.00 8.96 8.92 400 350 300 250 -50 -25 0 25 50 75 100 125 -50 -25 Temperature (C) 25 50 100 125 75 Quiescent Current v Temperature 2.5 400 2.0 Drop-Out Voltage (V) 500 300 200 Vo=0 Vin=10V 100 0 Temperature (C) Output Voltage Temperature Coefficient Short-Circuit Output Current (mA) 0 Temperature (C) Temperature (C) 0 Io=200mA 1.5 Io=100mA 1.0 0.5 0 -50 -25 0 25 50 75 100 125 -50 Temperature (C) (c) Zetex Semiconductors plc 2007 0 25 50 100 125 75 Temperature (C) Peak Output Current v Temperature Issue 9 - October 2007 -25 8 Drop-Out Voltage v Temperature www.zetex.com ZSR SERIES Typical characteristics Issue 9 - October 2007 (c) Zetex Semiconductors plc 2007 9 www.zetex.com ZSR SERIES Typical characteristics Issue 9 - October 2007 (c) Zetex Semiconductors plc 2007 10 www.zetex.com ZSR SERIES Typical characteristics Issue 9 - October 2007 (c) Zetex Semiconductors plc 2007 11 www.zetex.com ZSR SERIES Typical characteristics Issue 9 - October 2007 (c) Zetex Semiconductors plc 2007 12 www.zetex.com ZSR SERIES Typical characteristics Issue 9 - October 2007 (c) Zetex Semiconductors plc 2007 13 www.zetex.com ZSR SERIES Obsolete Variants TO92 Package suffix - C IN GND OUT Underside view SOT223 Order information Orderable Voltage Part marking Status Reel size (inches) Tape width (mm) Quantity per reel ZSR285GTA 2.85V ZSR285 Obsolete 7 12 1000 ZSR400GTA 4.0V ZSR400 Obsolete 7 12 1000 ZSR485GTA 4.85V ZSR485 Obsolete 7 12 1000 ZSR520GTA 5.2V ZSR520 Obsolete 7 12 1000 ZSR600GTA 6.0V ZSR600 Obsolete 7 12 1000 ZSR900GTA 9.0V ZSR900 Obsolete 7 12 1000 TO92 Order information Part Number Voltage Part marking Status Orderable ZSR285 2.85V ZSR285 Obsolete ZSR285C* ZSR300 3.0V ZSR300 Obsolete ZSR300C* ZSR330 3.3V ZSR330 Obsolete ZSR330C* ZSR400 4.0V ZSR400 Obsolete ZSR400C* ZSR485 4.85V ZSR485 Obsolete ZSR485C* ZSR500 5.0V ZSR500 Obsolete ZSR500C* ZSR520 5.2V ZSR520 Obsolete ZSR520C* ZSR600 6.0V ZSR600 Obsolete ZSR600C* ZSR800 8.0V ZSR800 Obsolete ZSR800C* ZSR900 9.0V ZSR900 Obsolete ZSR900C* ZSR1000 10.0V ZSR100 Obsolete ZSR1000C* ZSR1200 12.0V ZSR1200 Obsolete ZSR1200C* NOTES: * TO92 was supplied in the following reel options: loose in boxes of 4000 suffix: L taped and wound on a reel of 1500 suffix: STOB taped and folded in concertina form of 1500 suffix: STZ Issue 9 - October 2007 (c) Zetex Semiconductors plc 2007 14 www.zetex.com ZSR SERIES ZSR285 test conditions Symbol VO =6.85V Parameter Output Voltage Conditions TE IO=1 to 200mA( ) Vin=4.85 to 20V Min. 2.78 2.735 Typ. 2.85 2.736 Max. 2.92 2.964 Units V V 2.964 V 100mA( ) VO VO IO =1 to Vin=4.85 to 20V IO=1 to 200mA IO=1 to 100mA Vn Vin/ VO VO / T 10 5 2 350 40 25 600 100 100 mV mV mV A A A V rms dB 48 75 62 4.85 4.55 V 0.1 mV/C O Vin ( ) Quiescent current Quiescent current change IO=1 to 200mA Vin=4.85 to 20V Output noise voltage f=10Hz to 10Hz Ripple rejection Vin=5.85 to 218V f=120Hz Input voltage required to maintain regulation Average temperature IO=5.0mA( ) coefficient of VO BS O Ig Ig LE Line regulation Load regulation ZSR400 test conditions (Unless otherwise stated):Tj=25C, IO=100mA, Vin=8V Parameter Output Voltage Conditions IO=1 to 200mA( ) Min. 3.9 3.84 Vin=6 to 20V 3.84 IO =1 to VO Load regulation Ig Quiescent current Ig NOTES: ( )Tj=-55 Units V V 4.16 V 40 IO=1 to 200mA 5 25 IO=1 to 100mA 2 350 ( ) BS Output noise voltage f=10Hz to 10Hz Ripple rejection Vin=7 to 218V O Vin/ VO Max. 4.1 4.16 10 Quiescent current change IO=1 to 200mA Vin=6 to 20V Vn Vin Vin=6 to 20V LE Line regulation Typ. 4.0 100mA( ) O VO TE Symbol VO mV mV mV 600 A 100 A 100 A 75 V rms 48 62 dB 6 5.3 V f=120Hz Input voltage required to maintain regulation to 125C Issue 9 - October 2007 (c) Zetex Semiconductors plc 2007 15 www.zetex.com ZSR SERIES ZSR485 test conditions (Unless otherwise stated):Tj=25C, IO=100mA, Vin=8.85V VO Output Voltage 4.792 4.656 TE IO=1 to 200mA( ) Vin=6.8 to 20V 4.85 4.656 4.971 5.044 V V 5.044 V IO =1 to 100mA( ) Line regulation Vin=6.85 to 20V VO Load regulation Ig Vn Vin/ VO Quiescent current 40 mV IO=1 to 200mA 5 25 mV IO=1 to 100mA 2 ( ) BS O Ig 10 LE VO 350 Quiescent current change IO=1 to 200mA Vin=6.85 to 20V Output noise voltage f=10Hz to 10Hz Ripple rejection Vin=7.85 to 18V mV 600 A 100 A 100 A 50 V rms 50 64 dB 6.85 6.55 V 0.1 mV/C VO / T O f=120Hz Vin Input voltage required to maintain regulation Average temperature coefficient of VO IO=5.0mA( ) ZSR520 test conditions (Unless otherwise stated):Tj=25C, IO=100mA, Vin=100mV VO Output Voltage TE IO=1 to 200mA( ) Vin=7.2 to 20V IO =1 to Vin=7.2 to 20V VO Load regulation Vn Vin/ VO 5.330 5.41 V V 5.41 V 10 40 mV IO=1 to 200mA 5 25 mV IO=1 to 100mA 2 350 O ( ) Quiescent current change IO=1 to 200mA Vin=7.2 to 20V BS Ig 4.99 LE Line regulation Quiescent current 5.2 100mA( ) VO Ig 5.070 4.99 Output noise voltage f=10Hz to 10Hz Ripple rejection Vin=8.2 to 18V mV 600 A 100 A 100 A 75 V rms 48 62 dB 7.2 6.9 V 0.1 mV/C f=120Hz VO / T ( Input voltage required to maintain regulation Average temperature coefficient of VO O Vin IO=5.0mA( ) )Tj=-55 to 125C Issue 9 - October 2007 (c) Zetex Semiconductors plc 2007 16 www.zetex.com ZSR SERIES ZSR600 test conditions (Unless otherwise stated):Tj=25C, IO=100mA, Vin=10V Parameter Output Voltage Conditions IO=1 to 200mA() Min. 5.85 5.76 Vin=8 to 20V 5.76 TE Symbol VO Typ. 6 Max. 6.15 6.24 Units V V 6.24 V IO =1 to 100mA() Line regulation Vin=8 to 20V 10 40 mV VO Load regulation IO=1 to 200mA 7 30 mV IO=1 to 100mA 2.5 () 350 LE VO Quiescent current Ig Quiescent current change IO=1 to 200mA Vin=8 to 20V BS O Ig Vn Output noise voltage f=10Hz to 10Hz Vin/VO Ripple rejection Vin=9 to 18V Vin Input voltage required to maintain regulation Average temperature coefficient of VO mV 600 A 100 A 100 A 90 V rms 48 62 dB 8 7.7 V 0.15 mV/C O f=120Hz VO/T IO=5.0mA() ZSR900 test conditions (Unless otherwise stated):Tj=25C, IO=100mA, Vin=13V Parameter Output Voltage Conditions IO=1 to 200mA() Min. 8.775 8.64 Vin=11 to 20V 8.64 Max. 9.225 9.36 Units V V 9.36 V 100mA() LE T IO =1 to Typ. 9.0 E Symbol VO VO Line regulation Vin=11 to 20V 12 40 mV VO Load regulation IO=1 to 200mA 9 30 mV IO=1 to 100mA 3 Ig Quiescent current Ig Quiescent current change IO=1 to 200mA Vin=11 to 20V BS O () Vn Output noise voltage f=10Hz to 10Hz Vin/VO Ripple rejection Vin=12 to 18V Vin Input voltage required to maintain regulation Average temperature coefficient of VO 350 mV 600 A 100 A 100 A 150 V rms 43 57 dB 11 10.7 V 0.25 mV/C VO/T NOTES: ()Tj=-55 O f=120Hz IO=5.0mA() to 125C Issue 9 - October 2007 (c) Zetex Semiconductors plc 2007 17 www.zetex.com ZSR SERIES Definitions Product change Zetex Semiconductors reserves the right to alter, without notice, specifications, design, price or conditions of supply of any product or service. Customers are solely responsible for obtaining the latest relevant information before placing orders. Applications disclaimer The circuits in this design/application note are offered as design ideas. It is the responsibility of the user to ensure that the circuit is fit for the user's application and meets with the user's requirements. No representation or warranty is given and no liability whatsoever is assumed by Zetex with respect to the accuracy or use of such information, or infringement of patents or other intellectual property rights arising from such use or otherwise. Zetex does not assume any legal responsibility or will not be held legally liable (whether in contract, tort (including negligence), breach of statutory duty, restriction or otherwise) for any damages, loss of profit, business, contract, opportunity or consequential loss in the use of these circuit applications, under any circumstances. Life support Zetex products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Zetex Semiconductors plc. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labelling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Reproduction The product specifications contained in this publication are issued to provide outline information only which (unless agreed by the company in writing) may not be used, applied or reproduced for any purpose or form part of any order or contract or be regarded as a representation relating to the products or services concerned. Terms and Conditions All products are sold subjects to Zetex' terms and conditions of sale, and this disclaimer (save in the event of a conflict between the two when the terms of the contract shall prevail) according to region, supplied at the time of order acknowledgement. For the latest information on technology, delivery terms and conditions and prices, please contact your nearest Zetex sales office. Quality of product Zetex is an ISO 9001 and TS16949 certified semiconductor manufacturer. To ensure quality of service and products we strongly advise the purchase of parts directly from Zetex Semiconductors or one of our regionally authorized distributors. For a complete listing of authorized distributors please visit: www.zetex.com/salesnetwork Zetex Semiconductors does not warrant or accept any liability whatsoever in respect of any parts purchased through unauthorized sales channels. ESD (Electrostatic discharge) Semiconductor devices are susceptible to damage by ESD. Suitable precautions should be taken when handling and transporting devices. The possible damage to devices depends on the circumstances of the handling and transporting, and the nature of the device. The extent of damage can vary from immediate functional or parametric malfunction to degradation of function or performance in use over time. Devices suspected of being affected should be replaced. Green compliance Zetex Semiconductors is committed to environmental excellence in all aspects of its operations which includes meeting or exceeding regulatory requirements with respect to the use of hazardous substances. Numerous successful programs have been implemented to reduce the use of hazardous substances and/or emissions. All Zetex components are compliant with the RoHS directive, and through this it is supporting its customers in their compliance with WEEE and ELV directives. Product status key: "Preview" Future device intended for production at some point. Samples may be available "Active" Product status recommended for new designs "Last time buy (LTB)" Device will be discontinued and last time buy period and delivery is in effect "Not recommended for new designs" Device is still in production to support existing designs and production "Obsolete" Production has been discontinued Datasheet status key: "Draft version" This term denotes a very early datasheet version and contains highly provisional information, which may change in any manner without notice. "Provisional version" This term denotes a pre-release datasheet. It provides a clear indication of anticipated performance. However, changes to the test conditions and specifications may occur, at any time and without notice. "Issue" This term denotes an issued datasheet containing finalized specifications. However, changes to specifications may occur, at any time and without notice. Zetex sales offices Europe Americas Asia Pacific Corporate Headquarters Zetex GmbH Kustermann-park Balanstrae 59 D-81541 Munchen Germany Telefon: (49) 89 45 49 49 0 Fax: (49) 89 45 49 49 49 europe.sales@zetex.com Zetex Inc 700 Veterans Memorial Highway Hauppauge, NY 11788 USA Zetex (Asia Ltd) 3701-04 Metroplaza Tower 1 Hing Fong Road, Kwai Fong Hong Kong Zetex Semiconductors plc Zetex Technology Park, Chadderton Oldham, OL9 9LL United Kingdom Telephone: (1) 631 360 2222 Fax: (1) 631 360 8222 usa.sales@zetex.com Telephone: (852) 26100 611 Fax: (852) 24250 494 asia.sales@zetex.com Telephone: (44) 161 622 4444 Fax: (44) 161 622 4446 hq@zetex.com (c) 2007 Published by Zetex Semiconductors plc Issue 9 - October 2007 (c) Zetex Semiconductors plc 2007 18 www.zetex.com