1N3016BUR-1 - 1N3045BUR-1 Available on commercial versions Qualified Levels: JAN, JANTX, and JANTXV 1 Watt Surface Mount Zener Diodes Qualified per MIL-PRF-19500/115 DESCRIPTION This surface mountable Zener diode series is similar to the 1N3016B-1 through 1N3045B-1 JEDEC registration in the DO-13 package except that it meets the surface mount DO-213AB outline. It is an ideal selection for applications of high density and low parasitic requirements. Due to its glass hermetic seal qualities and metallurgically enhanced internal construction, it is also well suited for high-reliability applications where it is available in JAN, JANTX, and JANTXV military qualifications. Lower voltages are also available in the 1N3821AUR-1 through 1N3828AUR-1 series (3.3 V to 7.5 V) in the same package (see separate data sheet). DO-213AB (MELF, LL41) Package Important: For the latest information, visit our website http://www.microsemi.com. FEATURES * * Leadless surface mount equivalents to the JEDEC registered 1N3016 through 1N3045 number series. Zener voltage range: 6.8 volts to 110 volts. * Hermetically sealed, double plug glass construction. * * * Metallurgically bonded. Voltage tolerances of 5%, 2%, and 1% available. JAN, JANTX, and JANTXV qualifications also available per MIL-PRF-19500/115. Also available in: DO-41 package (glass axial-leaded) 1N3016B-1 - 1N3045B-1 (See part nomenclature for all available options.) * RoHS compliant versions available (commercial grade only). APPLICATIONS / BENEFITS * * * * * * * * Regulates voltage over a broad operating current and temperature range. Wide selection from 6.8 to 110 V. Low reverse (leakage) currents. Leadless package for surface mounting. Ideal for high-density situations. Metallurgically enhanced internal contact design for greater reliability and lower thermal resistance. Non-sensitive to ESD. Inherently radiation hard as described in Microsemi "MicroNote 050". MAXIMUM RATINGS Parameters/Test Conditions Junction and Storage Temperature Thermal Resistance Junction-to-End Cap (1) DC Power Dissipation Forward Voltage @ 200 mA Solder Temperature @ 10 s Symbol Value Unit T J and T STG R JEC PD VF T SP -55 to +175 50 1.0 1.2 260 C C/W W V o C Notes: 1. Derate linearly starting at T EC 125 C to zero at 175 C (see Figure1). MSC - Lawrence 6 Lake Street, Lawrence, MA 01841 Tel: 1-800-446-1158 or (978) 620-2600 Fax: (978) 689-0803 MSC - Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: www.microsemi.com T4-LDS-0285-1, Rev. 1 (4/22/13) (c)2013 Microsemi Corporation Page 1 of 5 1N3016BUR-1 - 1N3045BUR-1 MECHANICAL and PACKAGING * * * * * * * * CASE: Hermetically sealed glass MELF package. TERMINALS: Tin/lead or RoHS compliant matte-tin finished copper clad steel available (commercial grade only). Solderable per MIL-STD-750, method 2026. MARKING: Cathode band. POLARITY: Diode to be operated with the banded end positive with respect to the opposite end for Zener regulation. MOUNTING SURFACE SELECTION: The Axial Coefficient of Expansion (COE) of this device is approximately +6PPM/C. The COE of the Mounting Surface System should be selected to provide a suitable match with this device. TAPE & REEL optional: Standard per EIA-481-1-A with 12 mm tape. Consult factory for quantities. WEIGHT: Approximately 0.05 grams. See Package Dimensions on last page. PART NOMENCLATURE JAN 1N3016 B UR -1 e3 Reliability Level JAN = JAN level JANTX = JANTX level JANTXV = JANTXV level Blank = Commercial RoHS Compliance e3 = RoHS compliant (available on commercial grade only) Blank = non-RoHS compliant Metallurgically Bonded JEDEC type number (See Electrical Characteristics table) Surface Mount MELF Package Zener Voltage Tolerance B = 5% C = 2% D = 1% SYMBOLS & DEFINITIONS Definition Symbol IR I Z , I ZT , I ZK I ZM VF VR VZ Z ZT or Z ZK Reverse Current: The maximum reverse (leakage) current that will flow at the specified voltage and temperature. Regulator Current: The dc regulator current (I Z ), at a specified test point (I ZT ), near breakdown knee (I ZK ). Maximum Regulator (Zener) Current: The maximum rated dc current for the specified power rating. Maximum Forward Voltage: The maximum forward voltage the device will exhibit at a specified current. Reverse Voltage: The reverse voltage dc value, no alternating component. Zener Voltage: The Zener voltage the device will exhibit at a specified current (I Z ) in its breakdown region. Dynamic Impedance: The small signal impedance of the diode when biased to operate in its breakdown region at a specified rms current modulation (typically 10% of I ZT or I ZK ) and superimposed on I ZT or I ZK respectively. T4-LDS-0285-1, Rev. 1 (4/22/13) (c)2013 Microsemi Corporation Page 2 of 5 1N3016BUR-1 - 1N3045BUR-1 *ELECTRICAL CHARACTERISTICS @ 25 C JEDEC TYPE NUMBER 1N3016BUR-1 1N3017BUR-1 1N3018BUR-1 1N3019BUR-1 1N3020BUR-1 1N3021BUR-1 1N3022BUR-1 1N3023BUR-1 1N3024BUR-1 1N3025BUR-1 1N3026BUR-1 1N3027BUR-1 1N3028BUR-1 1N3029BUR-1 1N3030BUR-1 1N3031BUR-1 1N3032BUR-1 1N3033BUR-1 1N3034BUR-1 1N3035BUR-1 1N3036BUR-1 1N3037BUR-1 1N3038BUR-1 1N3039BUR-1 1N3040BUR-1 1N3041BUR-1 1N3042BUR-1 1N3043BUR-1 1N3044BUR-1 1N3045BUR-1 NOMINAL ZENER VOLTAGE V Z @ I ZT (Note 1) Volts 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100 110 ZENER TEST CURRENT *JEDEC Registered Data. NOTES: 1. I ZT mA 37 34 31 28 25 23 21 19 17 15.5 14 12.5 11.5 10.5 9.5 8.5 7.5 7.0 6.5 6.0 5.5 5.0 4.5 4.0 3.7 3.3 3.0 2.8 2.5 2.3 MAXIMUM ZENER IMPEDANCE (Note 3) Z ZT @ I ZT Ohms 3.5 4.0 4.5 6 7 8 9 10 14 16 20 22 23 25 35 40 45 50 60 70 80 95 110 125 150 175 200 250 350 450 Z ZK @ I ZK Ohms mA 700 1.0 700 .5 700 .5 700 .5 700 .25 700 .25 700 .25 700 .25 700 .25 700 .25 750 .25 750 .25 750 .25 750 .25 750 .25 1000 .25 1000 .25 1000 .25 1000 .25 1500 .25 1500 .25 1500 .25 2000 .25 2000 .25 2000 .25 2000 .25 3000 .25 3000 .25 3000 .25 4000 .25 MAXIMUM ZENER CURRENT I ZM (Note 3) mA 140 125 115 105 95 85 80 74 63 60 52 47 43 40 34 31 28 26 23 21 19 18 17 15 14 12 11 10 9.0 8.3 MAXIMUM REVERSE LEAKAGE CURRENT IR @ VR A Volts 150 5.2 100 5.7 50 6.2 25 6.9 25 7.6 10 8.4 10 9.1 10 9.9 10 11.4 10 12.2 10 13.7 10 15.2 10 16.7 10 18.2 10 20.6 10 22.8 10 25.1 10 27.4 10 29.7 10 32.7 10 35.8 10 38.8 10 42.6 10 47.1 10 51.7 10 56.0 10 62.2 10 69.2 10 76.0 10 83.6 MAXIMUM TEMP. COEFF. OF ZENER VOLTAGE VZ %/oC 0.061 0.065 0.070 0.073 0.076 0.078 0.081 0.085 0.088 0.089 0.091 0.092 0.093 0.094 0.096 0.098 0.099 0.100 0.101 0.102 0.102 0.103 0.103 0.104 0.104 0.105 0.106 0.108 0.11 0.11 Not JEDEC Data. Zener voltage (V Z ) is measured with junction in thermal equilibrium with still air at a temperature of 25 oC. The test currents (I ZT ) at nominal voltages provide a constant 0.25 watts. 2. The Zener impedance is derived when a 60 cycle ac current having an rms value equal to 10% of the dc Zener current (I ZT or I ZK ) is superimposed on I ZT or I ZK . Zener impedance is measured at 2 points to ensure a sharp knee on the breakdown curve and to eliminate unstable units. See MicroNote 202 for variation in dynamic impedance with different Zener currents. 3. These values of I ZM may often be exceeded in the case of individual diodes. The values shown are calculated for a unit at the high voltage end of its tolerance range. Allowance has also been made for the rise in Zener voltage above V ZT that results from Zener impedance and the increase in junction temperature as a unit approaches thermal equilibrium at a dissipation of 1 watt. The I ZM values shown for +/- 5% tolerance units may be used with little error for +/- 10% tolerance units, but should be reduced by 7% to include a +/- 20% tolerance unit near the high voltage end of its tolerance range. T4-LDS-0285-1, Rev. 1 (4/22/13) (c)2013 Microsemi Corporation Page 3 of 5 1N3016BUR-1 - 1N3045BUR-1 DC Operation Maximum Rating (W) GRAPHS T EC (C) (End Cap) FIGURE 1 Temperature-Power Derating Curve T4-LDS-0285-1, Rev. 1 (4/22/13) (c)2013 Microsemi Corporation Page 4 of 5 1N3016BUR-1 - 1N3045BUR-1 PACKAGE DIMENSIONS Symbol BD BL ECT S Dimensions Inch Millimeters Min Max Min Max 0.094 0.105 2.39 2.67 0.189 0.205 4.80 5.21 0.014 0.022 0.360 0.560 0.001 min 0.03 min NOTES: 1. Dimensions are in inches. Millimeters are given for general information only. 2. Gap not controlled, shape of body and gap not controlled. 3. In accordance with ASME Y14.5M, diameters are equivalent to x symbology. PAD LAYOUT Ltr A B C T4-LDS-0285-1, Rev. 1 (4/22/13) (c)2013 Microsemi Corporation Inch 0.276 0.070 0.110 mm 7.00 1.8 2.8 Page 5 of 5 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Microsemi: CDLL3020 CDLL3020A CDLL3036B 1N3040BUR-1 1N3025BUR-1 CDLL3031B 1N3017BUR-1 1N3035BUR-1 CDLL3039B CDLL3030 CDLL3020B 1N3039BUR-1 CDLL3038B CDLL3017B CDLL3019B CDLL3040B CDLL3034B CDLL3035B 1N3029BUR-1 1N3024BUR-1 1N3037BUR-1 1N3038BUR-1 1N3034BUR-1 CDLL3023B 1N3027BUR-1 1N3032BUR-1 CDLL3018B CDLL3027B 1N3019BUR-1 CDLL3030A 1N3028BUR-1 CDLL3042B 1N3045BUR-1 1N3030BUR-1 CDLL3025B 1N3043BUR-1 CDLL3044B 1N3016BUR-1 1N3036BUR-1 CDLL3028B CDLL3026B CDLL3024B JANTXV1N3021BUR-1 CDLL3041B 1N3031BUR-1 CDLL3043B CDLL3030B CDLL3032B 1N3018BUR-1 CDLL3037B CDLL3045B CDLL3029B 1N3020BUR-1 1N3023BUR-1 CDLL3022B 1N3022BUR-1 CDLL3033B CDLL3016B 1N3042BUR-1 1N3041BUR-1 CDLL3021B