ML SERIES
RCD’s ML series offers cost-effective solutions for low
resistance applications and are particularly ideal for various
types of current sensing, voltage dividing, battery and pulse
circuits, including linear and switching power supplies, power
amplifiers, consumer electronics, etc. The resistance element is
thick film or metal plate, and is coated with high temperature
insulation for exceptional environmental protection.
Industry’s widest range and lowest cost!
Values as low as 0.0005Ω, current ratings to 60 Amp
High power to size ratio
Non-inductive
OPTIONS
Option V: 170°C operating temperature range
Option EK: Group A screening per MIL-R-10509
Option EL: Group A & B screening per MIL-R-10509
LOW-OHM CHIP RESISTORS, 0.1W TO 3W
TYPICAL PERFORMANCE CHARACTERISTICS
DCR epyT
.xaM egattaW*
)C°07(
.xaM tnerruC*
)C°07(
ecnatsiseR egnaR CTlacipyT )C°/mpp( CTlanoitpO )C°/mpp( LWT t
20.0 Ω940.0OT Ω004001,002
2040LMW1.0A3050.0 Ω990.0OT Ω003001,002040.±400.400.±020.410.±400.010.±400.
001.0 Ω0.1OT Ω0020011.±00.1[]5.[]1.±53.[]1.±52.[±]1.
10.0 Ω940.0OT Ω004001,002
3060LMW521.0A5.3050.0 Ω990.0OT Ω003001,002160.±500.130.±400.600.±610.800.±210.
001.0 Ω0.1OT Ω00200155.1[±]21.8.[±]1.]51.±04.[]2.±3.[
10.0 Ω940.0OT Ω004001,002
5080LMW52.0A5050.0 Ω990.0OT Ω003001,0020.±970.80800.±050.600.±020.800.±420.
001.0 Ω0.1OT Ω002001]2.0±0.2[]2.0±52.1[]51.±5.0[]2.0±6.0[
10.0 Ω940.0OT Ω004001,002
6021LMW5.0A7050.0 Ω990.0OT Ω003001,002800.±621.800.±360.600.±020.810.±030.
001.0 Ω0.1OT Ω002001]2.0±2.3[]2.0±6.1[]51.±5.0[]64.±67.0[
10.0 Ω940.0OT Ω004001,002
0102LMW1A41050.0 Ω990.0OT Ω003001,002800.±791.800.±890.600.±020.020.±230.
001.0 Ω0.1OT Ω002001]2.0±0.5[]2.0±5.2[]51.±5.0[]5.0±8.0[
10.0 Ω940.0OT Ω004001,002
2152LMW2A02050.0 Ω990.0OT Ω003001,00210.0±052.210.±621.800.±420.020.±040.
001.0 Ω0.1OT Ω002001]52.0±53.6[]3.0±2.3[]2.±6.0[]5.0±1[
2152BLM*W3/W2A06
5000.0 Ω053001,002
57000.0 ,Ω 100.0 ,Ω
5100.0 ,Ω 200.0 Ω00205,00110.0±052. ]52.0±53.6[ 210.±621. ]3.0±2.3[ **360.~020. ]6.1~5.0[ **601.~040. ]7.2~0.1[
5200.0 Ω10.0OT Ω05105,001
scitsiretcarahC ∆R
51+ot°55-(kcohSlamrehT5)C°%1±
]RxP[x2(daolrevOemiTtrohS
2/1
).ces5,%2±
)C°55-(noitarepO.pmeTwoL%1±
).srh001,C°521(erusopxE.pmeThgiH%1±
taeHredloSotecnatsiseR%5.0±
ecnatsiseRerutsioM%1±
).srh0001(efiLdaoL%2±
gnitarepOpmeTegnaRerutareC°551+ot55-
tnerruC&egattaWfognitareDC°07evobaC°/%771.1
ytilibaredloSegarevoC.niM%59
noisehdAlanimreT.niMsmarG51
RESISTORSCAPACITOR
S
C
OILSDELAY
LINES
FA009C Sale of this product is in accordance with GF-061. Specifications subject to change without notice.
ML2010 - R01 - J T W
RCD C omponents Inc, 520 E.Industrial Park Dr, Manchester, NH, USA 03109 rcdcomponents.com Tel: 603-669-0054 Fax: 603-669-5455 Email:sales@rcdcomponents.com
* In order to operate at maximum wattage and current ratings, a suitable substrate or PCB design is required to carry the current and drain the heat. Heavy Cu, large
pads and traces, and/or multilayer PC boards are recommended. MLB2512 has a 3W rating when used with 300mm2 x .0056 Cu pads
** Varies with resistance value (lower values typically have thicker bodies and wider termination pads for increased current carrying capability)
t
W
T
L
24
Tolerance Code: F=1%, G=2%, J=5%
Packaging: B=Bulk, T=Tape & Reel
RCD Type
P/N DESIGNA TION:
Termination: W= Lead-free, Q= Tin/Lead (leave blank if
either is acceptable)
Resis. Code: for 1% tol. use R as decimal point and 3
digits, e.g. R100= 0.1Ω, R200=.2Ω; for 2%-10% use R
and 2 digits , e.g. R10= 0.1Ω, R20= .2Ω, etc. except if
necessary, use additional (significant) digits, e.g. R005 for
0.005Ω, R0075 for 0.0075Ω in any tolerance
Options: V, EK, EL (leave blank if standard)
Optional TC: 50=50ppm, 101=100ppm, 201-200ppm
RoHS
Term.W is
RoHS
compliant
& 260°C
compatible
