Call 800-678-0141 1 H 38999 Product Data Data Sheet Sheet Product PDS-208-12 A connector that has the connections... Goes from 9 to 187 contacts! High Density High Density Interconnects The HD38999 family of connectors has 30% more contact density than the highest density Mil Spec 38999 connectors of its size. This series of connectors was designed to utilize milspecified 38999 components with the exception of the contacts and inserts arrangement. Utilizing existing mil-qualified 39029 size 23 contacts and 38999 insert materials, these connectors are essentially a drop-in replacement for the standard 38999 connector. This connector design benefits users in a couple of different ways. For those users who need to increase the amount of contacts in their application, the HD38999 series allows them to do so without increasing the size of their connector. For users who are looking to decrease the overall size of their system, they can do so by using smaller shell sizes without decreasing the number of contacts. Amphenol has qualified this series of connectors to the requirements of MIL-DTL-38999. Amphenol also manufacturers this high density series in Filter, Hermetic and customized versions to fit our customer's needs. Please contact us if additional information is required. HD38999 Connectors available styles: * Aluminum * Composite * Stainless Steel * Sealed (IP67) * Filtered High Density Shell Sizes (Front of Pin Insert Shown) (all contacts are size 23) For more information e-mail: hd38999info@amphenol-aao.com 31 1 2 3 1 1 8 7 6 9 5 3 4 2 10 18 17 18 1 12 13 19 9 2 14 15 8 9-9 3 7 24 32 88 41 49 58 42 50 32 4 46 40 5 6 24 31 39 25 32 3 16 84 16 25 33 16 17 29 73 15 9 4 10 1 55 7 3 8 11 1 30 47 11-19 6 13-32 19 53 55 59 71 67 52 72 15-55 18 66 73 17-73 18 19-88 22 1 3 4 Increased number of contacts in HD38999 insert pattern compared to Standard 38999* contact density of same shell size. 1 1 5 6 12 13 14 32 33 43 44 55 56 66 67 78 79 89 90 21-121 42 99 100 108 109 116 117 121 4 5 21 32 44 57 69 82 94 107 119 130 140 33 45 58 70 83 95 108 120 131 23-151 51 147 141 148 151 11 20 12 32 33 11 22 22 23 21 45 46 59 72 86 60 73 101 87 115 128 142 102 116 129 143 155 156 25-187 59 167 168 176 177 184 185 187 * Standard inserts for 38999 series are shown in Amphenol's Combined Circular Catalog,12-C( ) Amphenol Aerospace The Interconnection Leader Call 800-678-0141 or visit us at www.amphenol-aerospace.com Call Call 800-678-0141 800-678-0141 2 H 38999 ProductData DataSheet Sheet Product PDS-208-12 High Density Easy Steps to build a part number... HD38999 1. 2. 3. 4. 5. 6. 7. Connector Type Shell Styles Service Class Shell Size - Insert Arrangement Contact Type Alternate Positions PCB Options TV or PTV (Potted version) 06 RW 23-151 P B (P25) Step 6. Select an Alternate Position Step 1. Select a Connector Type P (prefix for Potted) TV TVP MTV CTV CTVP A, B, C, D, E or blank for normal. Designates Tri-Start Series Connector Back panel mounted receptacle CLUTCH-LOK connector with "MS" stamping (Note: remove dashes in how to order part number when ordering CLUTCH-LOK) Composite MIL-DTL-38999 Series III connector Panel mounted composite receptacle Shell Size Key & keyway arrangement identification letter N* A B C D E N* A B C D E N* A B C D E N* A B C D E 9 Step 2. Select a Shell Style Designates Wall mount receptacle Line receptacle Box mount receptacle Straight plug Jam nut receptacle Proprietary CLUTCH-LOK high vibration straight plug (service Classes RK & RS only) Reduced flange jam nut receptacle (not available in composite) Straight plug with integral backshell (not available in composite) 00 01 02 06 07 26 97 96 11, 13, and 15 17 and Step 3. Select a Service Class Corrosion resistant olive drab cadmium plate aluminum, 500 hour extended salt spray, EMI -50dB @ 10GHz specification min.,175C RL Corrosion resistant stainless steel, electro-deposited nickel, 48 hours salt spray, 175C, non-firewall DT Zinc-Nickel alternative to cadmium. Corrosion resistant, 500 hour salt spray, conductive, -65C to +175C 23, E /2 002 / 95 / and 25 pheno l Am RECEPTACLE (front face shown) HS Ro U MAIN KEYWAY HS Ro U PLUG (front face shown) MAIN KEYWAY E /2 002 / 95 / pheno l Am E Step 4. Select a Shell Size - Insert Arrangement 21, C U E ZN Durmalon plated, alternative to cadmium. Corrosion resistant, 500 hour extended salt spray EMI -50dB @ 10GHz specification min. without CR6 HS Ro 140 132 118 140 155 131 141 156 145 156 146 141 142 170 169 140 145 153 142 170 169 140 145 153 C RW pheno l Am E Designates Electroless nickel plated aluminum, optimum EMI shielding effectiveness -65dB @ 10GHz specification min., 48 hour salt spray, 175C BR or CR or DR or BP BSC CP BSC DP BSC AP BSC AR BSC BR BSC BP BSC C RF 19 AR or AP BSC 105 102 80 35 64 91 95 113 90 53 119 51 80 135 49 66 62 79 80 135 49 66 62 79 E /2 002 / 95 / DR BSC CP BSC CR BSC DP BSC Shell Sizes are MIL-DTL-38999, Series III, with the newer High Density insert arrangements shown on page 1. Shell Size 91113151719212325- Amphenol Aerospace 265 320 312 275 304 240 236 292 252 255 298 242 293 310 244 257 280 272 293 310 244 257 280 272 A plug with a given rotation letter will mate with a receptacle with the same rotation letter. The angles for a given connector are the same whether it contains pins or sockets. Inserts are not rotated in conjunction with the master key/ keyway. Step 7. Select a PCB Contact Option Insert Arrangement Number 9 19 32 55 73 88 121 151 187 215 248 230 205 234 197 208 182 195 220 176 184 196 200 200 200 180 197 196 200 200 200 180 197 Step 5. Select a Contact Type P S Designates Pin contacts Socket contacts Pin Socket Pin Contacts Socket Contacts Contacts with Alignment Contacts with Alignment Disc* Disc* P1 P15 P2 P25 P3 P35 P1AD P15AD P2AD P25AD P3AD P35AD S1 S15 S2 S25 S3 S35 S1AD S15AD S2AD S25AD S3AD S35AD PCB tail stickout +/-.040 inch .100" nominal .150" nominal .200" nominal .250" nominal .300" nominal .350" nominal * See page 8 for more information on alignment discs for HD38999 connectors. Note: Standard tail diameter is 0.019 .001 Call 800-678-0141 3 H 38999 Product Data Sheet PDS-208-12 High Density Contacts & Tools Contact Part Numbers: Size 23 Sockets Size 23 Pins Sealing Plugs Tools: 10-597330-735 (M39029/17-172) 10-597331-735 (M39029/18-177) 10-405996-222 (MS27488-22-2) Crimp Barrel Dia.: Crimp Tool: DanielsM22520/2-01 Positioner: Daniels M22520/2-12 Pins Insertion Tool: Daniels DAK225-22 Removal Tool: Daniels DRK225-22 Crimp Barrel Depth: (Inches) .034-.036 Note: Wire insulation diameter greater than 0.045 is too large for the extraction tool to work propely. Connector damage is possible. (Inches) .151-.155 Technical Data HD38999 series was designed to meet and/or exceed the specifications of MILDTL-38999. The connector series has been tested to all the requirements of 38999 with the use of AS39029 size 23 contacts. Test reports are available upon request. The following is a summary of some of the performance requirements. Electrical: EMI Shielding Effectiveness: 22 AWG: 24 AWG: 26 AWG: 28 AWG: Solid metal to metal coupling, EMI grounding fingers and conductive finishes have proven to be the ultimate in EMI/ EMP shielding effectiveness. The following chart illustrated shielding effectiveness data which is typical in HD38999 connectors. 5.0 AMPS 3.0 AMPS 2.0 AMPS 1.5 AMPS Insulation Resistance: 5000 megohms min.@500 VDC 25C 140 Dielectric Withstanding Voltage: 1000 VRMS@sea level 120 Mechanical: Metallic Shells: Material: Aluminum alloy, Stainless Steel Protection: Electroless Nickel, O.D. Cadmium, Durmalon (Nickel PTFE), Zinc Nickel LEAKAGE dB 100 80 Composite Shells: Material: Thermoplastic Protection: Electroless Nickel, O.D. Cadmium, Durmalon (Nickel PTFE), Zinc Nickel 60 40 NICKEL CLASS F, CLASS M TYPICAL SHIELD EFFECTIVENESS DATA 20 Contacts: NICKEL CLASS F, CLASS M MIL-DTL-38999 REQUIREMENTS 0 100 200 300 400 600 500 700 800 FREQUENCY MEGAHERTZ 140 Insert Retention to Shell: 100 psi in axial load Durability: 500 full mating and unmating cycles Vibration: 60G sine per MIL-DTL-38999L Para 4.5.23.2.1 5G2 Random per EIA-364-28E, Test condition A 1G2 Random per EIA-364-28E, Test condition I Shock: Per EIA-364-27B, 300g 120 LEAKAGE dB 100 80 Environmental: 60 Operating Temperature: 40 NICKEL CLASS F, CLASS M TYPICAL SHIELD EFFECTIVENESS DATA NICKEL CLASS F, CLASS M MIL-DTL-38999 REQUIREMENTS 20 0 Material: Copper Alloy Protection: Gold over Nickel 1 2 3 4 5 6 7 FREQUENCY GIGAHERTZ 8 9 Salt Spray: Metallized: 10 Salt Spray Composite: -65C to +175C Electroless Nickel: 48 hours Anodic Coating, O. D. Cadmium, Durmalon, Zinc Nickel: 500 hours Electroless Nickel: 48 hours O. D. Cadmium, Durmalon, Zinc Nickel: 500 hours Amphenol Aerospace Call 800-678-0141 4 H 38999 PDS-208-12 High Density Shell Styles S 2 PLACES PANEL HOLE DIMENSIONS LL (TV) LL1 (CTV) R1 2 PLACES R2 2 PLACES Wall Mounting Receptacle TV00( CTV00( Product Data Sheet M (TV) M1 (CTV) AA B THREAD ) - Crimp, Metal ) - Crimp, Composite L (TV) L1 (CTV) V THREAD A1 BACK PANEL MOUNTING T 4 PLACES .005 M TT 4 PLACES RED BAND BLUE BAND See how to build a part number on pages 2 & 3 Red band indicates fully mated Blue band indicates rear release contact retention system. Z (TV) Z 1 (CTV) -A- A2 FRONT PANEL MOUNTING 1.240 MAX Inches .719 A2 AA Max. LL A1 Back Front Panel +.006 LL1 Z. Z1 2 R Thick- -.000 .005 TT T Max. Max. Panel Panel ness (TV) (CTV) .008 S Max. .008 (TV) (CTV) Mount Mount .948 .128 .153 .198 .650 .510 .234 .905 .908 .216 .594 11 B .7500 .469 .514 .820 .773 .812 .719 1.043 .128 .153 .198 .800 .620 .234 .905 .908 .194 13 C .8750 .469 .514 .820 .773 .906 .812 1.137 .128 .153 .198 .910 .740 .234 .905 .908 .194 15 D 1.0000 .469 .514 .820 .773 .969 .906 1.232 .128 .153 .198 1.040 .900 .234 .905 .908 .173 17 E 1.1875 .469 .514 .820 .773 1.062 .969 1.323 .128 .153 .198 1.210 1.010 .234 .905 .908 .194 19 F 1.2500 .469 .514 .820 .773 1.156 1.062 1.449 .128 .153 .198 1.280 1.130 .234 .905 .908 .194 21 G 1.3750 .500 .545 .790 .741 1.250 1.156 1.575 .128 .183 .228 1.410 1.250 .204 .905 .904 .194 23 H 1.5000 .500 .545 .790 .741 1.375 1.250 1.701 .154 .183 .228 1.530 1.360 .204 .905 .904 .242 25 J 1.6250 .500 .545 .790 .741 1.500 1.375 1.823 .154 .183 .228 1.660 1.470 .204 .905 .904 .242 MS B Thread Shell Class 2A L1 Shell Size 0.1P=0.3L- L Max. Max. Size Code TS (Plated) (TV) (CTV) 9 A .6250 .469 .514 M M1 +.000 +.000 -.005 -.005 (TV) (CTV) .820 .773 R1 All dimensions for reference only Line Receptacle TV01( CTV01( ) - Crimp, Metal ) - Crimp, Composite B THREAD Shell Size M +.000 -.005 (TV) M1 +.000 -.005 (CTV) L Max. (TV) .280 MIN FULL THD M (TV) M 1 (CTV) RED BAND S (TV) S1 (CTV) 2 PLACES See how to build a part number on pages 2 & 3 Red band indicates fully mated Blue band indicates rear release contact retention system. B Thread 0.1P-0.3LMS Shell TS-2A Size Code (Plated) LL (TV) LL1 (CTV) GG (TV) GG 1 (CTV) V THREAD Z (TV) Z 1(CTV) BLUE BAND -A- L (TV) L1 (CTV) Inches 1.240 MAX L1 S Max. .010 S1 .010 (CTV) (TV) (CTV) Z Max (TV) Z1 Max (CTV) GG .010 (TV) GG1 .010 (CTV) LL +.006 -.000 (TV) LL1 .005 (CTV) 9 A .6250 .820 .773 .469 .514 .675 .635 .153 .198 .812 .699 .905 .908 11 B .7500 .820 .773 .469 .514 .800 .765 .153 .198 .905 .875 .905 .908 13 C .8750 .820 .773 .469 .514 .925 .885 .153 .198 1.093 1.007 .905 .908 15 D 1.0000 .820 .773 .469 .514 1.050 1.100 .153 .198 1.219 1.140 .905 .908 17 E 1.1875 .820 .773 .469 .514 1.238 1.197 .153 .198 1.375 1.229 .905 .908 19 F 1.2500 .820 .773 .469 .514 1.300 1.260 .153 .198 1.469 1.380 .905 .908 21 G 1.3750 .790 .741 .500 .545 1.425 1.385 .183 .228 1.625 1.493 .905 .904 23 H 1.5000 .790 .741 .500 .545 1.550 1.510 .183 .228 1.750 1.626 .905 .904 25 J 1.6250 .790 .741 .500 .545 1.675 1.635 .183 .228 1.875 1.777 .905 .904 All dimensions for reference only Amphenol Aerospace Call 800-678-0141 5 H 38999 PDS-208-12 High Density Shell Styles R1 2 PLACES Box Mount Receptacle R2 2 PLACES TV02( CTV02( Product Data Sheet PANEL HOLE DIMENSIONS S 2 PLACES L (TV) L1 (CTV) BLUE BAND Z (TV) Z 1(CTV) RED BAND ) - Crimp, Metal )- Crimp, Composite A1 BACK PANEL MOUNTING TT 4 PLACES T 4 PLACES .005 M B THREAD AA M (TV) M 1 (CTV) See how to build a part number on pages 2 & 3 Red band indicates fully mated Blue band indicates rear release contact retention system. Consult Amphenol Aerospace for availability for composite box mount receptacles. MS B Thread M M1 Shell Class 2A L1 +.000 +.000 Shell Size 0.1P=0.3L- L Max. Max. -.005 -.005 Size Code TS (Plated) (TV) (CTV) (TV) (CTV) 9 A .6250 .205 .250 .820 .773 A2 FRONT PANEL MOUNTING LL (TV) LL1 (CTV) Inches .719 A1 Z. Z1 Back 2 R S T Max. Max. Panel Max. .008 (TV) (CTV) Mount .594 .948 .128 .153 .198 .650 11 B .7500 .205 .250 .820 .773 .812 .719 1.043 .128 .153 .198 .800 .620 .234 .905 .908 .194 13 C .8750 .205 .250 .820 .773 .906 .812 1.137 .128 .153 .198 .910 .740 .234 .905 .908 .194 15 D 1.0000 .205 .250 .820 .773 .969 .906 1.232 .128 .153 .198 1.040 .900 .234 .905 .908 .173 17 E 1.1875 .205 .250 .820 .773 1.062 .969 1.323 .128 .153 .198 1.210 1.010 .234 .905 .908 .194 19 F 1.2500 .205 .250 .820 .773 1.156 1.062 1.449 .128 .153 .198 1.280 1.130 .234 .905 .908 .194 21 G 1.3750 .235 .280 .790 .741 1.250 1.156 1.575 .128 .183 .228 1.410 1.250 .204 .905 .904 .194 23 H 1.5000 .235 .280 .790 .741 1.375 1.250 1.701 .154 .183 .228 1.530 1.360 .204 .905 .904 .242 25 J 1.6250 .235 .280 .790 .741 1.500 1.375 1.823 .154 .183 .228 1.660 1.470 .204 .905 .904 .242 R1 A2 AA Max. Front Panel Panel ThickMount ness .510 .234 LL +.006 -.000 (TV) .905 LL1 .005 TT (CTV) .008 .908 .216 All dimensions for reference only C Jam Nut Receptacle TV07( CTV07( BLUE BAND PANEL THICKNESS .062 MIN .125 MAX ) - Crimp, Metal ) - Crimp, Composite .378 MAX `O' RING D1 D2 V THREAD B THREAD RED BAND .091 MAX JAM NUT D-HOLE MOUNTING H -A- K REF SHELL SIZES 9/11 - .871 SHELL SIZES 13/25 - .878 1.280 MAX S 2 PLACES See how to build a part number on pages 2 & 3 Red band indicates fully mated Blue band indicates rear release contact retention system. H .059 dia. min., 3 lockwire holes. Formed lockwire hole design (6 holes) is optional Shell Size MS Shell Size Code B Thread Class 2A 0.1P-0.3L-TS (Plated) C Max. D +.010 -.000 D +.000 -.010 1 2 Inches H Hex +.017 -.016 S .010 V Thread Metric 9 A .6250 1.199 .700 .670 .875 1.062 M12X1-6g 11 B .7500 1.386 .825 .770 1.000 1.250 M15X1-6g 13 C .8750 1.511 1.010 .955 1.188 1.375 M18X1-6g 15 D 1.0000 1.636 1.135 1.085 1.312 1.500 M22X1-6g 17 E 1.1875 1.761 1.260 1.210 1.438 1.625 M25X1-6g 19 F 1.2500 1.949 1.385 1.335 1.562 1.812 M28X1-6g 21 G 1.3750 2.073 1.510 1.460 1.688 1.938 M31X1-6g 23 H 1.5000 2.199 1.635 1.585 1.812 2.062 M34X1-6g 25 J 1.6250 2.323 1.760 1.710 2.000 2.188 M37X1-6g All dimensions for reference only Amphenol Aerospace Call 800-678-0141 6 H 38999 Product Data Sheet PDS-208-12 High Density Shell Styles 1.220 REF. C DIA. M Reduced Flange Jam Nut Receptacle TV97( A `O' RING D1 RED BAND ) - Crimp, Metal D2 +.005 .043 -.000 LOCK WIRE HOLES 4 PLACES .094 .005 4 PLACES BLUE BAND B THREAD R THREAD See how to build a part number on pages 2 & 3 Red band indicates fully mated Blue band indicates rear release contact retention system. Shell Size MS Shell Size Code B Thread Class 2A 0.1P-0.3L-TS (Plated) A +.010 -.005 C Dia. Max. .062 -.125 PANEL THICKNESS .125 .005 JAM NUT D-HOLE MOUNTING Inches D1 +.010 -.000 D2 +.000 -.010 M R Thread (Plated) 9-7543) 9 A .6250 .104 1.199 .915 .670 .871 M12X1-6g 11 B .7500 .104 1.386 1.042 .770 .871 M15X1-6g 13 C .8750 .104 1.511 1.240 .955 .878 M18X1-6g 15 D 1.0000 .104 1.636 1.357 1.085 .878 M22X1-6g 17 E 1.1875 .104 1.761 1.630 1.210 .878 M25X1-6g 19 F 1.2500 .135 1.949 1.816 1.335 .878 M28X1-6g 21 G 1.3750 .135 2.073 1.942 1.460 .878 M31X1-6g 23 H 1.5000 .135 2.199 2.067 1.585 .878 M34X1-6g 25 J 1.6250 .135 2.323 2.190 1.710 .878 M37X1-6g All dimensions for reference only Straight Plug with Integral Backshell TV96( ) (TV Type) - Crimp, Metal This MIL-DTL-38999 Series III style connector features an integral backshell design that eliminates the need for costly backshell accessories. The backshell feature is incorporated into the rear of the connector shell, allowing the user to attach the shield of their cable directly to the connector. This provides superior EMI shielding and ease for overmold applications. The straight plug with integral backshell is available in aluminum shells with OD Cad or Electroless Nickel plating. Amphenol Aerospace .500 .002 .376 +.001 -.002 A DIA. BLUE BAND C 2 PLACES B 2 PLACES .063 +.001 -.002 .313 .002 1.600 MAX. See how to build a part number on pages 2 & 3 Blue band indicates rear release contact retention system. Inches Shell Size MS Shell Size Code A Max. B +.005 -.000 C +.003 -.002 9 A .859 .416 .472 11 B .969 .524 .580 13 C 1.141 .652 .708 15 D 1.266 .810 .866 17 E 1.391 .928 .984 19 F 1.500 1.046 1.102 21 G 1.625 1.164 1.220 23 H 1.750 1.282 1.338 25 J 1.875 1.400 1.456 All dimensions for reference only 7 H 38999 High Density Shell Styles Call 800-678-0141 Product Data Sheet PDS-208-12 METAL 1.234 MAX 1.220 MAX B THREAD Q Straight Plug TV06( CTV06( ) - Crimp, Metal ) - Crimp, Composite V THREAD BLUE BAND .359 MAX .591 +.003 -.000 -A- COMPOSITE 1.234 MAX B THREAD V THREAD .359 MAX Q BLUE BAND .591 +.003 -.000 -A- CLUTCH-LOKTM Plug TV26( MTV26( ) - Crimp, Metal, Proprietary ) - Crimp, Metal, with "MS" stamping Designed for high vibration and harsh environments such as aircraft gas turbine engines, the CLUTCH-LOK is also an ideal choice for demanding applications such as aircraft, space and military ground vehicles. The unique clutch design of the Amphenol CLUTCH-LOK means that you don't have to compromise the need for quick, smooth mating of plugs and receptacles in order to get increased uncoupling torque. The CLUTCH-LOK has proven to not only remain mated and pass all the Series III specification requirements, it also has proven to actually tighten itself under vibration. This is a powerful advantage over the traditionally high vibration application connectors. The CLUTCH-LOK is also a tremendous advantage in inaccessible, hard to reach areas where mating torque is difficult to apply and complete coupling is not verifiable by inspection. CLUTCH-LOK features and benefits: * * * * * 1.234 MAX 1.220 MAX B THREAD Q V THREAD BLUE BAND .359 MAX .591 +.003 -.000 High degree of differential torque Infinite free coupling and positive metal-to-metal bottoming with each mating No settling back to the next ratchet tooth Available with stainless steel shells and Class K firewall inserts All the advantages of MIL-DTL-38999 Series III including EMI/RFI shielding, electrolytic erosion resistance and contact protection with recessed pins * Enhanced connector performance at affordable prices * Completely intermateable with all existing MIL-DTL-38999 Series III connectors * Fully QPL'd -A- See how to build a part number on pages 2 & 3 Blue band indicates rear release contact retention system Shell Size MS Shell Size Code B Thread 0.1P-0.3L-TS-2B (Plated) Inches Q Dia. Max. 9 A .6250 .858 11 B .7500 .984 13 C .8750 1.157 15 D 1.0000 1.280 17 E 1.1875 1.406 19 F 1.2500 1.516 21 G 1.3750 1.642 23 H 1.5000 1.768 25 J 1.6250 1.890 All dimensions for reference only Amphenol Aerospace Call 800-678-0141 8 H 38999 Product Data Sheet PDS-208-12 High Density New Custom Designed HD38999 Connectors Provide More Interconnect Solutions: Alignment Disks HD38999 Double Flange Receptacles for PC Board Applications Alignment disks keep contacts aligned for easier insertion into circuit boards. These are typically ordered with the connector - see step 7 of How to Order on page 2. Amphenol also offers PC tail connectors in high density. A customed designed HD38999 with double flanges is available in box mount and jam nut panel mounting which allows the user to mount to PC boards. Shells are available in composite, aluminum and stainless steel. Consult Amphenol Aerospace for ordering information. .032 .005 D DIA. Shell Size 9 11 13 15 17 19 21 23 25 D Dia. .010 .234 .350 .500 .725 .750 .850 .953 1.147 1.250 Filtered HD38999 Connectors - for EMI/EMP Protection High density patterns are available in filter 38999 connectors - consult Amphenol Aerospace for ordering. HD38999 for Gigabit Ethernet Applications The HD38999 is available for high speed (Gigabit Ethernet) data transmission in the size 9-9 insert pattern. Data transmission performance of this connector insert: * 10 Base T, 100 Base TX, and 1000 Base T networks using Cat 5e per TIA/ EIA568B and Class D per ISO/IEC 11801. (Test report available - consult Amphenol Aerospace for more information) Signal-Ground Pin Configuration Wiring Recommendations Orange Blue White/Orange 1 2 3 Brown 4 White/Blue 8 9 5 White/Green 7 6 Ground/or cavity not used Green White/Brown View Rear of Connector HD38999 Connector with 9-9 Insert Pattern (Rear View) Notice: Specifications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all connectors. Amphenol Aerospace AMPHENOL is a registered trademark of Amphenol Corporation. 2011 Amphenol Corporation Printed in U.S.A. 3/15/2011 Call 800-678-0141 or visit us at www.amphenol-aerospace.com