IDS-16-4 Amphenol (R) Amphenol(R) Tru-Loc(R) Rugged Environment Connector featuring RADSOK(R) Contacts Amphenol Industrial Products Group introduces a connection system family with 1.5 mm socket contacts featuring Amphenol's exclusive RADSOK(R) contact system. The new Tru-Loc connector series is designed to perform in demanding environments, such as under valve covers on diesel engines and in high vibration sensor applications. Tru-Loc features a molded thermoplastic main plug body with secondary latch and a fluoroelastomer main joint seal that is resistant to many fluids, including diesel fuel. The Tru-Loc series includes 2-way, 4-way, and 6-way inline plugs and receptacles. Our engineering team can also design this series to mate to a device, sensor, fuel injector, splitter, pass through connector, and more. Special backshells can be designed for the 6-way series, and we can meet 150C temperatures upon request. These connection systems are RoHS compliant and seal to IP67 when mated. They are rated for high vibrations at 32 Grms. Features: * 2, 4, or 6 pin connector with 1.5mm RADSOK(R) featured contacts * Plug body with secondary latch * Fluoroelastomer main joint seal and silicone rubber wire seals to support IP67 rating * Dielectric withstanding voltage is 1600 Vac RMS * 13 Amp current rating * Insulation resistance can meet 100 M Ohms * Mating force less then 70N * Contact retention between 60~80N * Operating temperature can meet -40C to +125C or + 150C (depending on PN); 100 cycles, 1 hour per cycle * Durability is 20 mating cycles www.amphenol-industrial.com Material Specification (R) Plug with RADSOK Socket Contacts Plug Body Wire Seal Main Joint Seal Socket Contact Nylon Silicone Fluoroelastomer Copper Alloy w/ Stainless Steel Hood Receptacle with Pin Contacts Receptacle Body Pin Contact Nylon Copper Alloy Electrical Specifications Dielectric Withstanding Voltage (Test Voltage) Current Rating Insulation Resistance 1600 Vac RMS 13 amp (DC) (16 AWG Cable) 100 M Ohms Mechanical Specifications Connector Mating Force Contact Retention <70 N (15.7 lb) Primary Only: 80 N (18.0 lb) Secondary Only: 60 N (13.5 lb) 32 g RMS -40/+125C or +150C depending on PN; 100 cycles, 1 hour per cycle IP67 20 cycles Vibration Operating Temperature Range Ingress Protection Durability (Mating Cycle) * * * AIPG Part Number 10-838275-000 10-838275-002 10-707003-002 10-707508-02X(X: A,B,C,D) 10-707516-001 10-707517-001 10-707509-00X(X: A,B,C,D) 10-838137-00D Description 2way Plug (Plug Body, Locking Collar, and Main Joint Seal) 2way Plug (Plug Body, Locking Collar, and Main Joint Seal) 4way Plug (Plug Body, Locking Collar, and Main Joint Seal) 6way Plug (Plug Body, Locking Collar, and Main Joint Seal) 2way receptacle 4way receptacle 6way receptacle Wire seal (silicone) 10-838137-01D Wire seal (silicone) 10-730605-002 10-707515-002 10-707515-0M2 10-730179-002 10-730764-002 C10-708354-000 C10-730690-000 Stamped and formed female socket, Au+PdNi plating Stamped and formed male pin, Au+ PdNi plating Machined male pin, Au+PaNi plating Stamped and formed female socket, Au+PdNi plating Stamped and formed male pin, Au+ PdNi plating Size 20 AWG hand crimp tool Size 16-18 AWG hand crimp tool Additional Information 125C 150C 150C 4 indexes available, 150C 150C 150C 4 indexes available, 150C To be used with insulated wires with insulation between 1.8-2.5 mm To be used with insulated wires with insulation between 1.2-1.8 mm Crimps to wire from 0.8-1.3 sq. mm Crimps to wire from 0.8-1.3 sq. mm Crimps to wire from 0.8-1.3 sq. mm Crimps to wire from 0.5-0.8 sq. mm Crimps to wire from 0.5-0.8 sq. mm Socket Contacts are on reels of 4,200 pieces and pin contacts are on reels of 4000 pieces For Crimp Information please contact factory Cable seals are sold separately and must be used in all cavities and on both sides of the connection system (R) (R) For additional information on the Amphe-Power family of connectors with RADSOK (R) Technology, please ask for our RADSOK Catalog (SL-391) or download it from the Catalogs section of our website. Notice: Specifications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all connectors. For further information on your individual application requirements, contact: Amphenol Corporation North America: Amphenol Industrial Operations 180 N. Freeport Drive, Plant 4 Nogales, AZ 85621 Tel: (520) 285-5130 Fax: (520) 285-5134 Europe: Amphenol Industrial Operations Europe Via Barbaiana 5 1-20020 Lainate (MI) Italy Tel: +39 02 93254.204 Fax: +39 02 93254.444 Middle East: Amphenol Middle East Enterprises FZE Office C-37 PO Box 21107 Ajman Free Zone, UAE Tel: +9 716-7422494 Fax: +9 716-7422941 Email: rpedrazzini@amphenol-aio.com Email: info@amphenol-aio.com Email: jhussain@amphenol-industrial.com Asia: Amphenol Technology Shenzhen Ltd Block 5 Fuan 2nd Industrial Park Dayang Rd, Fuyong Baoan Baoan, Shenzhen, China 518103 Tel; +86 755 2881 8389 Fax; +86 755 2991 8310 Email: enquiry@amphenol-aio.com