* For use with regular ATC fuses. For details on the
easy
ID™ line of illuminating ATC blade fuses, see page 9.
For product information and data sheets, visit www.cooperbussmann.com 17
Consumer Aftermarket Catalog
HHS
Fuse Holders & Taps
Blister Tri-Lingual Maximum
Part No. Pack Blister Volts/Amps Leadwire Description
HHL X 32V/20A #16 Holder with cover
HHL-B 32V/20A #16 Body only
HHM X X 32V/30A #12 Holder with cover
HHM-B 32V/30A #12 Body only
HHM-C — Cover for HHM holder
HHU X 32V/30A #12 Water-resistant holder
ATM-FHID* X 32V/20A #16 Illuminating holder
In-Line Fuse Holders for ATM Fuses
Blister Tri-Lingual Maximum
Part No. Pack Blister Volts/Amps Leadwire Description
HHC X X 32V/20A #16 Yellow water-resistant holder
HHD X X 32V/30A #12 Heavy-duty fuse holder
HHD-30 X 32V/30A #12 Holder with ATC-30A fuse
HHD-C — Cover for HHC or HHD fuse folder
HHF X 32V/20A #16 Holder with protective cover
HHG X X 32V/30A #12 Heavy-duty holder with cover
HHR X 32V/30A #12 Heavy-duty water-resistant holder
HHS X 32V/20A #18 to #14 Self-stripping fuse holder
ATC-FHID* X 32V/20A #16 Illuminating holder
In-Line Fuse Holders for ATC Fuses
Cooper Bussmann offers a complete line of fuse holders to install either
blade-type or glass tube fuses. Choose water resistant and/or splash-proof
versions for extra protection in special applications. Four types of connectors
are available to meet the needs of technicians and do-it-yourselfers:
• Wire Loop. To install, simply cut the wire, strip ends and attach each end
to the circuit. Requires the use of additional connectors.
• Crimp-On. Strip wire and insert into fuse holder. Crimp the connections
tightly, and you're done. No additional hardware needed.
• Self-Stripping. Easy to install — simply locate fuse holder at a convenient
spot along the wire. Snap fuse holder closed around wire to pierce
insulation automatically.
• Quick-Connect. Attach fully insulated female push-on terminal onto the
1/4” quick-connect terminals.
When selecting a fuse holder, always match the device to the wire being
fused. Using an undersized fuse holder will increase electrical resistance in
the circuit and reduce performance. NOTE: Never install a fuse with a larger
amp rating than specified for the holder.
HHL
HHDHHC
HHFHHD-C
HHG
HHX
HHR
HHM-B
HHM-C
HHU
ATM-FHID
ATC-FHID
In-Line Fuse Holders for Maxi Fuses
Part No. Volts/Amps Leadwire Description
HHX 32V/20-60A #6 Fuse holder with cover
HHX-B 32V/20-60A #6 Body only
HHX-C — Cover only
Blade-Type Fuse Holders
* For use with regular ATM fuses. For details on the
easy
ID™ line of illuminating ATM blade fuses,
see page 9.