SPECIFICATION CONTROL DRAWING DATE: B AUG 17, 2006 54.5 [2.15"] MAX oC TYP oA THREAD TYP oB MAX TYP O RING - SILICONE TYP REV: STRAIGHT ADAPTOR -00 1 3 2 4 F MAX D MAX E M G MAX AX 45 ADAPTOR -45 90 ADAPTOR -90 (c) 2006 Tyco Electronics Corporation. All right reserved TITLE: Wire and Harnessing Products UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCH DIMENSIONS ARE SHOWN IN BRACKETS DRAWN: DATE: CRJ MAR 00 Raychem Wire and Harnessing Products 300 Constitution Drive Menlo Park, CA 94025 USA HEXASHIELD ADAPTOR FOR CODE 40 CONNECTORSBANDSTRAP CLAMPING NUT This drawing and the information set forth hereon is the property of Tyco Electronics and is to be held in trust and confidence. Publication, duplication, disclosure or use for any other purpose not expressly authorized in writing by Tyco Electronics is prohibited. DOCUMENT NO. Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. FILE-UK: File & DCR# SCALE: SHEET: Hex40-3scd-us D060246 NONE 1 OF 4 If this document is printed it becomes uncontrolled. Check for the latest revision. HEX40-AY-YY-YY-AYY-3-YY SPECIFICATION CONTROL DRAWING REV: DATE: B AUG 17, 2006 KIT DESCRIPTION ITEM 1 2 3 4 DESCRIPTION BODY ASSEMBLY CLAMPING NUT ASSEMBLY - BANDSTRAP CONIC RING STAR MATERIAL ALUMINIUM ALLOY ALUMINIUM ALLOY/STAINLESS STEEL ALUMINIUM ALLOY ALUMINIUM ALLOY TABLE OF DIMENSIONS Order Number Shell Size OA Thread Class 6H OB Max 19.0 [0.75"] 22.0 [0.87"] 25.5 [1.00"] 30.5 [1.20"] 33.5 [1.32"] 37.0 [1.46"] 38.5 [1.52"] 42.0 [1.65"] 46.5 [1.83"] 09 Mil. A Com. 09 M12 x 1 11 B 11 M15 x 1 13 C 13 M18 x 1 15 D 15 M22 x 1 17 E 17 M25 x 1 19 F 19 M28 x 1 21 G 21 M31 x 1 23 H 23 M34 x 1 25 J 25 M37 x 1 OC 0.10 [.004"] 8.00 [0.315"] 13.5 [0.531"] 15.00 [0.591"] 18.00 [0.709"] 21.00 [0.827"] 24.00 [0.945"] 27.00 [1.063"] 30.00 [1.181"] 33.00 [1.299"] D Max E Max F Max G Max 12.5 [0.49"] 13.0 [0.51"] 14.0 [0.55"] 14.5 [0.57"] 15.0 [0.59"] 15.5 [0.61"] 16.5 [0.65"] 17.0 [0.67"] 18.0 [0.71"] 55.5 [2.17"] 56.0 [2.20"] 56.5 [2.22"] 57.5 [2.26"] 58.0 [2.28"] 58.5 [2.30"] 59.0 [2.32"] 60.0 [2.36"] 61.0 [2.40"] 16.0 [0.63"] 17.5 [0.69"] 19.0 [0.75"] 20.5 [0.81"] 22.0 [0.87"] 23.5 [0.93"] 25.5 [1.00"] 27.0 [1.06"] 28.5 [1.12"] 57.0 [2.24"] 58.5 [2.30"] 61.5 [2.42"] 63.5 [2.50"] 65.0 [2.56"] 66.0 [2.60"] 67.5 [2.66"] 69.5 [2.74"] 71.0 [2.80"] Ferrule Quantity Std. Opt. 1 2 - 3 - 5 - 6 7 7 - 9 11 10 13 12 17 PART NUMBERING HEX40 A B 00 21 A9 3 DS - CONNECTOR CODE NUMBER HEX40 = MIL-C-38999 SERIES III AND IV - MATERIAL CODE: A = ALUMINIUM ALLOY - PLATING CODE: B = CADMIUM OLIVE DRAB TO QQ-P416 C = ELECTROLESS NICKEL TO MIL-C-26074 - BODY STYLE 00 = STRAIGHT 45 = 45 90 = 90 - ORDER NUMBER - FERRULE QUANTITY CODE - 3 = BANDSTRAP CLAMPING NUT - DS = DRILLED STAR - OPTIONAL - SEE NOTE 2 TITLE: Wire and Harnessing Products UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCH DIMENSIONS ARE SHOWN IN BRACKETS DRAWN: DATE: CRJ MAR 00 Raychem Wire and Harnessing Products 300 Constitution Drive Menlo Park, CA 94025 USA HEXASHIELD ADAPTOR FOR CODE 40 CONNECTORSBANDSTRAP CLAMPING NUT This drawing and the information set forth hereon is the property of Tyco Electronics and is to be held in trust and confidence. Publication, duplication, disclosure or use for any other purpose not expressly authorized in writing by Tyco Electronics is prohibited. DOCUMENT NO. Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. FILE-UK: File & DCR# SCALE: SHEET: Hex40-3scd-us D060246 NONE 2 OF 4 If this document is printed it becomes uncontrolled. Check for the latest revision. HEX40-AY-YY-YY-AYY-3-YY SPECIFICATION CONTROL DRAWING REV: DATE: B AUG 17, 2006 APPLICATION - These adaptors are designed to be mounted on the following connectors: MIL-C-38999 Series III and IV - They are qualified to the Raychem specification RB-114, when installed on metallic Mil-Specification circular connectors only. - They are designed primarily for open wire bundle installation having an overall braid, but are also designed to accept Raychem heat shrink moulded parts where strain relief is required - see illustration. MOULDED PART - Use in conjunction with the ferrules HET-A-0XX, which are purchased separately. Refer to HET-A-0XX S.C.D. for relevant selection details. INSTALLATION - See Installation Procedure RPIP-696-04. PACKAGING - All components are supplied in a plastic bag. NOTES! 1. Item 4 - Star - is not supplied with Hexashield Order Number 09. oH MAX 2. The DS option, illustrated below, is for a Drilled Star that is available on sizes 15 to 25 only. This option is to allow unshielded wires to pass through the assembly. STAR SIZE OD MAX 15 3.0 [0.12"] 17 6.0 [0.24"] 19 9.0 [0.35"] 21 12.0 [0.47"] 23 15.0 [0.59"] 25 18.0 [0.71"] 3. Where the ferrule quantities required are standard, the item 4 - Star - is also standard. If the optional quantity is selected then 2 items 4 will be supplied - one "split" and the other one standard. TITLE: Wire and Harnessing Products UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCH DIMENSIONS ARE SHOWN IN BRACKETS DRAWN: DATE: CRJ MAR 00 Raychem Wire and Harnessing Products 300 Constitution Drive Menlo Park, CA 94025 USA HEXASHIELD ADAPTOR FOR CODE 40 CONNECTORSBANDSTRAP CLAMPING NUT This drawing and the information set forth hereon is the property of Tyco Electronics and is to be held in trust and confidence. Publication, duplication, disclosure or use for any other purpose not expressly authorized in writing by Tyco Electronics is prohibited. DOCUMENT NO. Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. FILE-UK: File & DCR# SCALE: SHEET: Hex40-3scd-us D060246 NONE 3 OF 4 If this document is printed it becomes uncontrolled. Check for the latest revision. HEX40-AY-YY-YY-AYY-3-YY SPECIFICATION CONTROL DRAWING REV: DATE: B AUG 17, 2006 See below for illustration. EXAMPLE: FERRULE QUANTITY CODE -A13 -A13 = -A10 SPLIT STAR + -A3 STANDARD STAR 4. Assembly is to be permanently marked with Code Identity Number and Part Number. (e.g. 06090 HEX40-AB-00-21-A9-3) TITLE: Wire and Harnessing Products UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCH DIMENSIONS ARE SHOWN IN BRACKETS DRAWN: DATE: CRJ MAR 00 Raychem Wire and Harnessing Products 300 Constitution Drive Menlo Park, CA 94025 USA HEXASHIELD ADAPTOR FOR CODE 40 CONNECTORSBANDSTRAP CLAMPING NUT This drawing and the information set forth hereon is the property of Tyco Electronics and is to be held in trust and confidence. Publication, duplication, disclosure or use for any other purpose not expressly authorized in writing by Tyco Electronics is prohibited. DOCUMENT NO. Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. FILE-UK: File & DCR# SCALE: SHEET: Hex40-3scd-us D060246 NONE 4 OF 4 If this document is printed it becomes uncontrolled. Check for the latest revision. HEX40-AY-YY-YY-AYY-3-YY