Is Now Part of To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor's system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. SS15FA - S115FA 1 A, 50 V - 150 V Surface Mount Schottky Barrier Rectifiers Features * * * * * * * 2 Low Power Loss, High Efficiency Guard Ring for Overvoltage Protection High Surge Current Capability UL Flammability 94V-0 Classification MSL 1 per J-STD-020 RoHS Compliant / Green Molding Compound Industrial Device Qualified per AEC-Q101 Standards * See authorized use policy 1 SOD-123FA 1 Cathode 2 Anode Ordering Information Part Number Top Mark Package Packing Method SS15FA 15L SOD-123FA Tape and Reel SS16FA 16L SOD-123FA Tape and Reel SS19FA 19L SOD-123FA Tape and Reel S110FA 10L SOD-123FA Tape and Reel S115FA 1AL SOD-123FA Tape and Reel (c) 2016 Fairchild Semiconductor Corporation SS15FA - S115FA Rev. 1.1 www.fairchildsemi.com SS15FA - S115FA -- 1 A, 50 V - 150 V Surface Mount Schottky Barrier Rectifiers March 2016 Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Values are at TA = 25C unless otherwise noted. Value Symbol Parameter SS15 FA SS16 FA SS19 FA S110 FA S115 FA Unit 50 60 90 100 150 V VRRM Repetitive Peak Reverse Voltage VRMS RMS Reverse Voltage 35 42 63 70 105 V DC Blocking Voltage 50 60 90 100 150 V VR IF(AV) IFSM TJ TSTG Average Forward Rectified Current 1 A Peak Forward Surge Current: 8.3 ms Single Half Sine-Wave Superimposed on Rated Load 30 A Operating Junction Temperature Range -55 to +150 C Storage Temperature Range -55 to +150 C Thermal Characteristics(1) Values are at TA = 25C unless otherwise noted. Symbol Parameter Value Unit JL Thermal Characteristics, Junction-to-Lead 16 C/W RJA Thermal Resistance, Junction-to-Ambient 152 C/W Note: 1. Per JESD51-3 Recommended Thermal Test Board. Device mounted on FR-4 PCB, board size = 76.2mm x 114.3mm. Electrical Characteristics Values are at TA = 25C unless otherwise noted. Value Symbol Parameter Conditions SS15 SS16 FA FA VF Maximum Instantaneous Forward Voltage(2) IR Maximum Reverse Current at Rated VR SS19 FA S110 FA S115 FA IF = 0.5 A 0.58 0.70 0.75 IF = 1.0 A 0.70 0.80 0.90 TJ = 25C 0.4 TJ = 100C 6.0 TJ = 125C Unit V 0.05 mA 0.5 CJ Typical Junction Capacitance VR = 4 V, f = 1 MHz 54 35 pF Trr Typical Reverse Recovery Time IF = 0.5 A, IR = 1 A, IRR = 0.25 A 5.6 8.3 ns Note: 2. Pulse test with PW = 300 s, 1% duty cycle (c) 2016 Fairchild Semiconductor Corporation SS15FA - S115FA Rev. 1.1 www.fairchildsemi.com 2 SS15FA - S115FA -- 1 A, 50 V - 150 V Surface Mount Schottky Barrier Rectifiers Absolute Maximum Ratings SS15FA - S115FA PEAK FORWARD SURGE CURRENT (A) AVERAGE FORWARD CURRENT (A) 8.3ms Single Half Sine-Wave LEAD TEMPERATURE (oC) Figure 2. Maximum Non-Repetitive Forward Surge Curren Figure 1. Forward Current Derating Curve 1 1 SS19FA - S110FA o Forward Current, IF [A] Forward Current, IF [A] SS15FA - SS16FA o TA= 150 C TA= -55 C o TA= -40 C o 0.1 TA= 125 C o TA= 150 C 0.1 0.2 o o TA= -40 C o TA= 25 C 0.3 0.4 0.5 0.6 0.7 0.01 0.0 0.8 0.1 0.2 Forward Voltage, VF [V] 0.4 0.5 0.6 0.7 0.8 Figure 4. Typical Forward Characteristics 1 10000 S115FA 1000 Reverse Current, IR [A] Forward Current, IF [A] 0.3 Forward Voltage, VF [V] Figure 3. Typical Forward Characteristics o TA= 150 C 0.1 o TA= -55 C o TA= 125 C o TA= -40 C o TA= 25 C 0.01 0.0 o TA= -55 C TA= 125 C 0.1 o TA= 25 C 0.01 0.0 NUMBER OF CYCLES AT 60 Hz 0.1 0.2 0.3 0.4 10 o TA=150 C o o TA= 125 C TA= 75 C 1 0.1 o TA= 25 C o TA= -55 C 0.01 o 0.001 TA= -40 C 1E-4 SS15FA-SS16FA 0.5 0.6 0.7 1E-5 10 0.8 Forward Voltage, VF [V] 20 30 40 50 60 70 80 90 100 Percent of Rated Peak Reverse Voltage [%] Figure 5. Typical Forward Characteristics (c) 2016 Fairchild Semiconductor Corporation SS15FA - S115FA Rev. 1.1 100 Figure 6. Typical Reverse Characteristics www.fairchildsemi.com 3 SS15FA - S115FA -- 1 A, 50 V - 150 V Surface Mount Schottky Barrier Rectifiers Typical Performance Characteristics 10000 1000 o Reverse Current, IR [A] Junction Capacitance, CJ [pF] TA=150 C 1000 100 o TA= 125 C 10 1 o 0.1 TA= 75 C o TA= 25 C 0.01 o TA= -55 C o TA= -40 C 0.001 1E-4 100 10 SS15FA-SS16FA SS19FA-S115FA SS19FA-S115FA 1E-5 20 30 40 50 60 70 80 90 1 0.1 100 Percent of Rated Peak Reverse Voltage [%] 100 Figure 8. Typical Junction Capacitance Figure 7. Typical Reverse Characteristics (c) 2016 Fairchild Semiconductor Corporation SS15FA - S115FA Rev. 1.1 1 10 Reverse Voltage, VR [V] www.fairchildsemi.com 4 SS15FA - S115FA -- 1 A, 50 V - 150 V Surface Mount Schottky Barrier Rectifiers Typical Performance Characteristics (Continued) 2.90 2.70 1.90 1.70 4.30 1.40 1.90 1.20 TOP VIEW 1.40 1.20 LAND PATTERN RECOMMENDATION 1.43 1.23 3.80 3.40 0.30 0.16 FRONT VIEW 0.85 0.35 2.60 2.45 1.20 0.80 BOTTOM VIEW NOTES: A. NO INDUSTRY STANDARD APPLIES TO THIS PACKAGE. B. ALL DIMENSIONS ARE IN MILLIMETERS. C. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR PROTRUSIONS. D. DRAWING FILE NAME: MKT-MA02Drev3 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com (c) Semiconductor Components Industries, LLC N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 www.onsemi.com 1 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative www.onsemi.com