To learn more about ON Semiconductor, please visit our website at
www.onsemi.com
Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers
will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor
product management systems do not have the ability to manage part nomenclature that utilizes an underscore
(_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain
device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated
device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please
email any questions regarding the system integration to Fairchild_questions@onsemi.com.
Is Now Part of
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number
of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right
to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON
Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON
Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s
technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA
Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended
or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out
of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor
is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
SS15FA - S115FA — 1 A, 50 V - 150 V Surface Mount Schottky Barrier Rectifiers
© 2016 Fairchild Semiconductor Corporation www.fairchildsemi.com
SS15FA - S115FA Rev. 1.1
March 2016
12
Cathode Anode
SS15FA - S115FA
1 A, 50 V - 150 V Surface Mount Schottky Barrier
Rectifiers
Features
• Low Power Loss, High Efficiency
• Guard Ring for Overvoltage Protection
• High Surge Current Capability
• UL Flammability 94V-0 Classification
• MSL 1 per J-STD-020
• RoHS Compliant / Green Molding Compound
• Industrial Device Qualified per AEC-Q101 Standards
* See authorized use policy
Ordering Information
Part Number Top Mark Package Packing Method
SS15FA 15L SOD-123FA Tape and Reel
SS16FA 16L SOD-123FA Tape and Reel
SS19FA 19L SOD-123FA Tape and Reel
S110FA 10L SOD-123FA Tape and Reel
S115FA 1AL SOD-123FA Tape and Reel
SOD-123FA
1
2
SS15FA - S115FA — 1 A, 50 V - 150 V Surface Mount Schottky Barrier Rectifiers
© 2016 Fairchild Semiconductor Corporation www.fairchildsemi.com
SS15FA - S115FA Rev. 1.1 2
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be opera-
ble above the recommended operating conditions and stressing the parts to these levels is not recommended. In addi-
tion, extended exposure to stresses above the recommended operating conditions may affect device reliability. The
absolute maximum ratings are stress ratings only. Values are at TA = 25°C unless otherwise noted.
Thermal Characteristics(1)
Values are at TA = 25°C unless otherwise noted.
Note:
1. Per JESD51-3 Recommended Thermal Test Board. Device mounted on FR-4 PCB, board size = 76.2mm x
114.3mm.
Electrical Characteristics
Values are at TA = 25°C unless otherwise noted.
Note:
2. Pulse test with PW = 300 μs, 1% duty cycle
Symbol Parameter Value Unit
SS15
FA SS16
FA SS19
FA S110
FA S115
FA
VRRM Repetitive Peak Reverse Voltage 50 60 90 100 150 V
VRMS RMS Reverse Voltage 35 42 63 70 105 V
VRDC Blocking Voltage 50 60 90 100 150 V
IF(AV) Average Forward Rectified Current 1 A
IFSM
Peak Forward Surge Current: 8.3 ms Single Half
Sine-Wave Superimposed on Rated Load 30 A
TJOperating Junction Temperature Range -55 to +150 C
TSTG Storage Temperature Range -55 to +150 C
Symbol Parameter Value Unit
JL Thermal Characteristics, Junction-to-Lead 16 C/W
RJA Thermal Resistance, Junction-to-Ambient 152 C/W
Symbol Parameter Conditions Value Unit
SS15
FA SS16
FA SS19
FA S110
FA S115
FA
VF
Maximum Instantaneous
Forward Voltage(2)
IF = 0.5 A 0.58 0.70 0.75 V
IF = 1.0 A 0.70 0.80 0.90
IR
Maximum Reverse Current
at Rated VR
TJ = 25°C 0.4 0.05
mATJ = 100°C 6.0
TJ = 125°C 0.5
CJTypical Junction Capacitance VR = 4 V,
f = 1 MHz 54 35 pF
Trr Typical Reverse Recovery Time
IF = 0.5 A,
IR = 1 A,
IRR = 0.25 A
5.6 8.3 ns
SS15FA - S115FA — 1 A, 50 V - 150 V Surface Mount Schottky Barrier Rectifiers
© 2016 Fairchild Semiconductor Corporation www.fairchildsemi.com
SS15FA - S115FA Rev. 1.1 3
Typical Performance Characteristics
Figure 1. Forward Current Derating Curve Figure 2. Maximum Non-Repet itive
Forward Surge Curren
Figure 3. Typical Forward Characteristics Figure 4. Typical Forward Characteristics
Figure 5. Typical Forward Characteristics Figure 6. Typical Reverse Characteristics





     
AVERAGE FORWARD CURRENT (A)
LEAD TEMPERATURE (
o
C)
SS15FA - S115FA




 
PEAK FORWARD SURGE CURRENT (A)
NUMBER OF CYCLES AT 60 Hz
8.3ms Single Half
Sine-Wave
0.01
0.1
1
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
SS15FA - SS16FA
TA= -55oC
TA= -40oC
TA= 125oC
TA= 25oC
TA= 150oC
Forward Voltage, VF [V]
Forward Current, IF [A]
0.01
0.1
1
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
SS19FA - S110FA
TA= -55oC
TA= -40oC
TA= 125oC
TA= 25oC
TA= 150oC
Forward Voltage, VF [V]
Forward Current, IF [A]
0.01
0.1
1
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
S115FA
TA= -55oC
TA= -40oC
TA= 125oC
TA= 25oC
TA= 150oC
Forward Voltage, VF [V]
Forward Current, IF [A]
10 20 30 40 50 60 70 80 90 100
1E-5
1E-4
0.001
0.01
0.1
1
10
100
1000
10000
SS15FA-SS16FA
TA= 125oC
TA= 75oCTA=150oC
TA= 25oC
TA= -40oC
TA= -55oC
Reverse Current, IR [μA]
Percent of Rated Peak Reverse Voltage [%]
SS15FA - S115FA — 1 A, 50 V - 150 V Surface Mount Schottky Barrier Rectifiers
© 2016 Fairchild Semiconductor Corporation www.fairchildsemi.com
SS15FA - S115FA Rev. 1.1 4
Typical Performance Characteristics (Continued)
Figure 7. Typical Reve rse Characteristics Figure 8. Typical Junction Capacitance
20 30 40 50 60 70 80 90 100
1E-5
1E-4
0.001
0.01
0.1
1
10
100
1000
10000
SS19FA-S115FA
TA= 125oC
TA= 75oC
TA=150oC
TA= 25oC
TA= -40oCTA= -55oC
Reverse Current, IR [μA]
Percent of Rated Peak Reverse Voltage [%]
1.40
1.20
1.90 1.40
1.20
4.30
1.43
1.23
0.30
0.16 3.80
3.40
1.90
1.70
2.90
2.70
1.20
0.80
0.85
0.35 2.60
2.45
NOTES:
A. NO INDUSTRY STANDARD APPLIES TO THIS
PACKAGE.
B. ALL DIMENSIONS ARE IN MILLIMETERS.
C. DIMENSIONS ARE EXCLUSIVE OF BURRS,
MOLD FLASH AND TIE BAR PROTRUSIONS.
D. DRAWING FILE NAME: MKT-MA02Drev3
TOP VIEW
LAND PATTERN RECOMMENDATION
BOTTOM VIEW
FRONT VIEW
www.onsemi.com
1
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries.
ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor’s product/patent
coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein.
ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards,
regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer
application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not
designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification
in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized
application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This
literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
www.onsemi.com
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: orderlit@onsemi.com
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
© Semiconductor Components Industries, LLC