USB3280 Hi-Speed USB Device PHY with UTMI Interface PRODUCT FEATURES Data Brief Available in a 36-pin lead-free RoHS compliant (6 x 6 x 0.90mm) QFN package Interface compliant with the UTMI specification (60MHz, 8-bit bidirectional interface) Only one required power supply (+3.3V) USB-IF "Hi-Speed" certified to USB 2.0 electrical specification Supports 480Mbps Hi-Speed (HS) and 12Mbps Full Speed (FS) serial data transmission rates Integrated 45 and 1.5k termination resistors reduce external component count Internal short circuit protection of DP and DM lines On-chip oscillator operates with low cost 24MHz crystal Latch-up performance exceeds 150mA per EIA/JESD 78, Class II ESD protection levels of 5kV HBM without external protection devices SYNC and EOP generation on transmit packets and detection on receive packets NRZI encoding and decoding Bit stuffing and unstuffing with error detection Supports the USB suspend state, HS detection, HS Chirp, Reset and Resume Support for all test modes defined in the USB 2.0 specification 55mA Unconfigured Current (typical) - ideal for bus powered applications. 83uA suspend current (typical) - ideal for battery powered applications. Industrial Operating Temperature -40oC to +85oC SMSC USB3280 Applications The USB3280 is the ideal companion to any ASIC, SoC or FPGA solution designed with a UTMI Hi-Speed USB device (peripheral) core. The USB3280 is well suited for: Cell Phones MP3 Players Scanners External Hard Drives Digital Still and Video Cameras Portable Media Players Entertainment Devices Printers PRODUCT PREVIEW Revision 1.5 (11-15-07) Hi-Speed USB Device PHY with UTMI Interface ORDER NUMBER(S): USB3280-AEZG FOR 36-PIN, QFN PACKAGE (LEAD-FREE ROHS COMPLIANT) USB3280-AEZG-TR FOR 36-PIN, QFN LEAD-FREE ROHS COMPLIANT (TAPE AND REEL) Reel Size is 3000 pieces. 80 ARKAY DRIVE, HAUPPAUGE, NY 11788 (631) 435-6000, FAX (631) 273-3123 Copyright (c) 2007 SMSC or its subsidiaries. All rights reserved. Circuit diagrams and other information relating to SMSC products are included as a means of illustrating typical applications. Consequently, complete information sufficient for construction purposes is not necessarily given. Although the information has been checked and is believed to be accurate, no responsibility is assumed for inaccuracies. SMSC reserves the right to make changes to specifications and product descriptions at any time without notice. Contact your local SMSC sales office to obtain the latest specifications before placing your product order. The provision of this information does not convey to the purchaser of the described semiconductor devices any licenses under any patent rights or other intellectual property rights of SMSC or others. All sales are expressly conditional on your agreement to the terms and conditions of the most recently dated version of SMSC's standard Terms of Sale Agreement dated before the date of your order (the "Terms of Sale Agreement"). The product may contain design defects or errors known as anomalies which may cause the product's functions to deviate from published specifications. Anomaly sheets are available upon request. SMSC products are not designed, intended, authorized or warranted for use in any life support or other application where product failure could cause or contribute to personal injury or severe property damage. Any and all such uses without prior written approval of an Officer of SMSC and further testing and/or modification will be fully at the risk of the customer. Copies of this document or other SMSC literature, as well as the Terms of Sale Agreement, may be obtained by visiting SMSC's website at http://www.smsc.com. SMSC is a registered trademark of Standard Microsystems Corporation ("SMSC"). Product names and company names are the trademarks of their respective holders. SMSC DISCLAIMS AND EXCLUDES ANY AND ALL WARRANTIES, INCLUDING WITHOUT LIMITATION ANY AND ALL IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND AGAINST INFRINGEMENT AND THE LIKE, AND ANY AND ALL WARRANTIES ARISING FROM ANY COURSE OF DEALING OR USAGE OF TRADE. IN NO EVENT SHALL SMSC BE LIABLE FOR ANY DIRECT, INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES; OR FOR LOST DATA, PROFITS, SAVINGS OR REVENUES OF ANY KIND; REGARDLESS OF THE FORM OF ACTION, WHETHER BASED ON CONTRACT; TORT; NEGLIGENCE OF SMSC OR OTHERS; STRICT LIABILITY; BREACH OF WARRANTY; OR OTHERWISE; WHETHER OR NOT ANY REMEDY OF BUYER IS HELD TO HAVE FAILED OF ITS ESSENTIAL PURPOSE, AND WHETHER OR NOT SMSC HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Revision 1.5 (11-15-07) 2 PRODUCT PREVIEW SMSC USB3280 Hi-Speed USB Device PHY with UTMI Interface General Description The USB3280 provides the Physical Layer (PHY) interface to a USB 2.0 Device Controller. The IC is available in a 36-pin lead-free RoHS compliant QFN package. The USB3280 is an industrial temperature USB 2.0 physical layer transceiver (PHY) integrated circuit. SMSC's proprietary technology results in low power dissipation, which is ideal for building a bus powered USB 2.0 peripheral. The PHY uses an 8-bit bidirectional parallel interface, which complies with the USB Transceiver Macrocell Interface (UTMI) specification. It supports 480Mbps transfer rate, while remaining backward compatible with USB 1.1 legacy protocol at 12Mbps. All required termination and 5.25V short circuit protection of the DP/DM lines are internal to the chip. The USB3280 also has an integrated 1.8V regulator so that only a 3.3V supply is required. While transmitting data, the PHY serializes data and generates SYNC and EOP fields. It also performs needed bit stuffing and NRZI encoding. Likewise, while receiving data, the PHY de-serializes incoming data, stripping SYNC and EOP fields and performs bit un-stuffing and NRZI decoding. SMSC USB3280 3 PRODUCT PREVIEW Revision 1.5 (11-15-07) Hi-Speed USB Device PHY with UTMI Interface Block Diagram XO XI VDD3.3 PWR Control PLL and XTAL OSC 1.8V Regulator TX LOGIC TX RPU_EN 1.5k TX State Machine VPO VMO Parallel to Serial Conversion RESET HS_DATA HS_DRIVE_ENABLE NRZI Encode XCVRSELECT FS TX OEB Bit Stuff SUSPENDN System Clocking HS_CS_ENABLE HS TX TERMSELECT DP OPMODE[1:0] R X LINESTATE[1:0] TXVALID TXREADY RX LOGIC FS SE+ VP RX State Machine Serial to Parallel Conversion VM Clock and Data Recovery Bit Unstuff RXVALID RXACTIVE FS SE- Clock Recovery Unit NRZI Decode FS RX MUX DATA[7:0] UTMI Interface CLKOUT DM Elasticity Buffer RXERROR HS RX BIASING HS SQ Bandgap Voltage Reference RBIAS Current Reference Figure 1 USB3280 Block Diagram Revision 1.5 (11-15-07) 4 PRODUCT PREVIEW SMSC USB3280 REVISION HISTORY REVISION D D2 D1 3 TERMINAL #1 IDENTIFIER AREA (D/2 X E/2) e 3 TERMINAL #1 IDENTIFIER AREA (D1/2 X E1/2) DESCRIPTION E RELEASED BY INITIAL RELEASE 6/13/03 S.K.ILIEV B ADDED "PRELIMINARY" NOTE 11/6/03 S.K.ILIEV C DELETED "PRELIMINARY" NOTE 6/30/04 S.K.ILIEV D E1 DATE A 12/7/04 S.K.ILIEV E L(MIN) FROM 0.35 TO 0.50, D2/E2 FROM 1.75 - 4.25 TO 3.55-3.70-3.85 4/5/05 S.K.ILIEV F ADDED PARAGRAPHS 1 TO 6 IN MAIN SPEC BODY & DWG AS ATTACHMENT NEW SMSC DRAWING FORMAT & ADDING 3-D VIEW 7/11/05 S.K.ILIEV EXPOSED PAD 4 E2 36X L 4X 45X0.6 MAX (OPTIONAL) 36X 0.2 MIN BOTTOM VIEW 4X 0-12 C 5 PRODUCT PREVIEW TOP VIEW 36X b 2 4 A2 ccc C A A1 A3 SIDE VIEW D2 / E2 VARIATIONS CATALOG PART 3-D VIEWS SMSC USB3280 NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETER. 2. POSITION TOLERANCE OF EACH TERMINAL IS 0.05mm AT MAXIMUM MATERIAL CONDITION. DIMENSIONS "b" APPLIES TO PLATED TERMINALS AND IT IS MEASURED BETWEEN 0.15 AND 0.30 mm FROM THE TERMINAL TIP. 3. DETAILS OF TERMINAL #1 IDENTIFIER ARE OPTIONAL BUT MUST BE LOCATED WITHIN THE AREA INDICATED. 4. COPLANARITY ZONE APPLIES TO EXPOSED PAD AND TERMINALS. UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS AND TOLERANCES ARE: DECIMAL 0.1 X.X X.XX 0.05 X.XXX 0.025 THIRD ANGLE PROJECTION 80 ARKAY DRIVE HAUPPAUGE, NY 11788 USA ANGULAR 1 TITLE NAME DIM AND TOL PER ASME Y14.5M - 1994 MATERIAL FIN ISH - DATE DRAWN S.K.ILIEV 12/6/04 S.K.ILIEV S.K.ILIEV REV DWG NUMBER CHECKED MO-36-QFN-6x6 12/6/04 APPR OVED PRINT WITH "SCALE TO FIT" DO NOT SCALE DRAWING PACKAGE OUTLINE 36 TERMINAL QFN, 6x6mm BODY, 0.5mm PITCH SCALE 12/6/04 STD COMPLIANCE 1:1 JEDEC: MO-220 F SHEET 1 OF 1 Figure 2 USB3280-AEZG 36-Pin QFN Package Outline and Parameters, 6 x 6 x 0.90 mm Body (Lead-Free RoHS Compliant) Hi-Speed USB Device PHY with UTMI Interface Revision 1.5 (11-15-07) Package Outline