F-219 SIR1-15-L-S-A SIB-120-02-F-S (2.54 mm) .100" SIB, SIR1 SERIES ONE-PIECE INTERFACES SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?SIB SIB 1 Insulator Material: Black Liquid Crystal Polymer Contact Material: Phosphor Bronze Plating: Au or Sn over 50 " (1.27 m) Ni Current Rating: 2.6 A per pin (1 pin powered) Operating Temp Range: -55 C to +125 C RoHS Compliant: Yes NO. OF POSITIONS PLATING OPTION 02 OPTION -LC -F 02 thru 30 = Locking Clip (Manual placement required) = Gold flash on contact, Matte Tin on tail (Per Row) No. of positions x (2.54) .100 (4.45) .175 PROCESSING (1.13) .044 (8.51) .335 Lead-Free Solderable: Yes SMT Lead Coplanarity: (0.10 mm) .004" max (02-19) (0.15 mm) .005" max (20-30)* *(.004" stencil solution may be available; contact IPG@samtec.com) 01 (0.38) .015 - LC (2.54) .100 RECOGNITIONS For complete scope of recognitions see www.samtec.com/quality S Note: The SIB Series is intended for vertical mating only. (5.27) .207 (3.81) .150 (1.42) .056 Note: Some sizes, styles and options are non-standard, non-returnable. FILE NO. E111594 SPECIFICATIONS For complete specifications and recommended PCB layouts see www.samtec.com?SIR1 SIR1 Insulator Material: Black LCP Contact Material: Phosphor Bronze Plating: Au or Sn over 50 " (1.27 m) Ni Current Rating: 2.8 A per pin (1 pin powered) Weld Tab: Phosphor Bronze RoHS Compliant: Yes -03, -05, -10, -15 No. of positions x (2.54) .100 + (2.54) .100 OPTION -A -L = Alignment Pin -S = (4.00 mm) .157" DIA Polyimide Film Pick & Place Pad = 30 " (0.76 m) Gold on contact, Matte Tin on tail (5.08) .200 -K -TR = Tape & Reel 01 Lead-Free Solderable: Yes SMT Lead Coplanarity: (0.10 mm) .004" max For complete scope of recognitions see www.samtec.com/quality S = 10 " (0.25 m) Gold on contact, Matte Tin on tail (Per Row) PROCESSING RECOGNITIONS PLATING OPTION NO. OF POSITIONS (2.54) .100 (2.54) .100 (6.00) .236 (0.25) .010 (4.45) .175 No. of positions x (2.54) .100 + (1.016) .040 (0.50) .020 (1.40) .055 (2.25) .089 FILE NO. E111594 Note: Some sizes, styles and options are non-standard, non-returnable. Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.