(2.54 mm) .100" SIB, SIR1 SERIES
SIB–120–02–F–S
SIR1–15–L–S–A
Due to technical progress, all designs, specifications and components are subject to change without notice.
All parts within this catalog are built to Samtec’s specifications.
Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.
WWW.SAMTEC.COM
SIB 1S
–LC
= Locking
Clip
(Manual
placement
required)
02 PLATING
OPTION
NO. OF
POSITIONS
–F
= Gold flash on contact,
Matte Tin on tail
02 thru 30
(Per Row)
For complete specifications and
recommended PCB layouts see
www.samtec.com?SIB
Insulator Material:
Black Liquid Crystal Polymer
Contact Material:
Phosphor Bronze
Plating:
Au or Sn over
50 µ" (1.27 µm) Ni
Current Rating:
2.6 A per pin
(1 pin powered)
Operating Temp Range:
-55 °C to +125 °C
RoHS Compliant: Ye s
OPTION
Note: Some sizes, styles and
options are non-standard,
non-returnable.
Note: The SIB Series
is intended for vertical
mating only.
SPECIFICATIONS
ONE-PIECE INTERFACES
For complete specifications and
recommended PCB layouts see
www.samtec.com?SIR1
Insulator Material: Black LCP
Contact Material:
Phosphor Bronze
Plating:
Au or Sn over
50 µ" (1.27 µm) Ni
Current Rating:
2.8 A per pin
(1 pin powered)
Weld Tab:
Phosphor Bronze
RoHS Compliant: Ye s
NO. OF
POSITIONS
SIR1 S
–03, –05, –10, –15
(Per Row)
PLATING
OPTION
SPECIFICATIONS OPTION
–A
= Alignment Pin
–K
= (4.00 mm) .157"
DIA Polyimide
Film Pick &
Place Pad
–TR
= Tape & Reel
– LC
–L
= 10 µ" (0.25 µm) Gold on contact,
Matte Tin on tail
–S
= 30 µ" (0.76 µm) Gold on contact,
Matte Tin on tail
(0.38)
.015
(8.51)
.335
01
(3.81)
.150
(5.27)
.207
(4.45)
.175
(1.13)
.044
(1.42)
.056
No. of positions x (2.54) .100
(2.54)
.100
(2.54)
.100
01
(0.50)
.020
(2.54)
.100 (1.40)
.055
(2.25)
.089
(6.00)
.236
(5.08)
.200
(4.45)
.175
(0.25)
.010
No. of positions x (2.54) .100
+ (2.54) .100
No. of positions x (2.54) .100
+ (1.016) .040
For complete scope
of recognitions see
www.samtec.com/quality
For complete scope
of recognitions see
www.samtec.com/quality
RECOGNITIONS
RECOGNITIONS
Note: Some sizes, styles and
options are non-standard,
non-returnable.
FILE NO. E111594
FILE NO. E111594
PROCESSING
Lead-Free Solderable: Ye s
SMT Lead Coplanarity:
(0.10 mm) .004" max (02-19)
(0.15 mm) .005" max (20-30)*
*(.004" stencil solution
may be available; contact
IPG@samtec.com)
PROCESSING
Lead-Free Solderable:
Yes
SMT Lead Coplanarity:
(0.10 mm) .004" max
F-219
