Dual Solid State Relays Evolution Dual Relays AC Output 25-50 Amp 280/600 VAC New 25A & 50A Output rating per channel @ 40C 120/240 & 480VAC Operating voltage rating 4-15, 15-32 & 4-32VDC Control input options Four input termination options available Top-bottom or left-right output screw connections available Zero voltage or random turn-on available SCR output for heavy industrial loads Industry standard panel mount package IP20 Protective cover available Input status LED indicators for each channel CE & RoHS compliant, UL & cUL recognized OUTPUT SPECIFICATIONS 1 CX2425XXXX CX2450XXXX CX4825XXXX CX4850XXXX Operating Voltage (47-63 Hz) [Vrms] 24-280 Load Current Range [Arms] 48-600 0.15-25 Maximum Surge Current (1 cycle) [Apk] @ 60 Hz 300 750 Maximum Surge Current (1 cycle) [Apk] @ 50 Hz 275 710 275 710 Transient Overvoltage [Vpk] 600 600 1200 1200 Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.3 1.3 1.3 1.3 Thermal Resistance Junction to Case (RqJC) [C/W] 0.65 0.33 0.65 0.33 Maximum It for Fusing (8.3 msec.) [Asec] 370 2320 370 2320 Maximum It for Fusing (10 msec.) [Asec] 380 2520 380 2520 500 500 500 500 0.1 0.1 0.25 0.25 1/2 cycle 1/2 cycle 1/2 cycle 1/2 cycle 1/2 cycle 1/2 cycle 1/2 cycle 1/2 cycle A 0.5 0.5 0.5 0.5 B 3 2 Off-state leakage [mArms] (@ max. line voltage & Ta = 25C) Maximum Turn-On Time 4 Maximum Turn-Off Time Power Factor (Minimum) with Maximum Load 1 0.15-25 48-600 0.15-50 300 750 Wiring Diagrams 24-280 0.15-50 CXXXDXXX CXXXEXXX CXXXWXXX 4-15 15-32 4-32 Minimum Turn-On Voltage [VDC] 4 15 4 Minimum Turn-Off Voltage [VDC] 1 1 1 Nominal Input Impedance [Ohms] 300 1500 See note 5 16 @ 5 VDC 18 @ 24 VDC 10 @ 12 VDC INPUT SPECIFICATIONS Control Voltage Range [VDC] Typical Input Current [mA] SSR Output Configuration "U" Option Top-Bottom Line/Load Connections LOAD A AC SUPPLY +A -A +B -B AC SUPPLY LOAD B GENERAL SPECIFICATIONS Dielectric Strength 50/60Hz Input/Output [Vrms] 4000 Dielectric Strength 50/60Hz Input-Output/Baseplate [Vrms] 2500 Insulation Resistance (Min.) @ 500 VDC [Ohms] 10 Maximum Capacitance Input/Output [pF] Contactor Output Configuration "V" Option Left-Right Line/Load Connections 9 10 Ambient Operating Temperature Range [C] - 40 to 80 Ambient Storage Temperature Range [C] - 40 to 125 MECHANICAL SPECIFICATIONS A Weight (Typical) 0.25 lb (100 grs) Encapsulation B Thermally Conductive Epoxy Terminals +A -A +B -B Screw Type Output: 8-32 Maximum Torque (Output Terminals) Maximum Wire Size (Output Terminals) 20 in lbs (2.2 Nm) AWG #8 with terminals. AWG #10 Stranded 1 All parameters at 25C and per channel unless otherwise specified. 2 Off-State dv/dt test method per EIA/NARM standard RS-443, paragraph 13.11.1 3 Heat sinking required, see derating curves. 4 Turn-On time for random turn-on (R) versions is 0.1 msec. 5 Input circuit incorporates active current limitation. Questions? Call or e-mail L O A D A AC SUPPLY Americas +1 (877) 502 5500 sales@crydom.com Europe +44 (0) 1202 606030 sales-europe@crydom.com L O A D B AC SUPPLY Dual Solid State Relays Part Number Nomenclature Output Current Rating per Channel 25: 25 Amps rms 50: 50 Amps rms @ Ta= 40C Cover Option C: IP20 D: IP00 (No cover) C D 24 Evolution Dual Series 25 D Output Voltage @ 50/60 Hz 24: 24-280 VAC 48: 48-600 VAC Options Blank: Zero Turn On R: Random Turn On H: TP- 01 thermal pad installed on relay Input Connector Options 1, 2, 3, or 4 1 V Input Control D: 4-15 VDC E: 15-32 VDC W: 4-32 VDC Required for valid part number For options only and not required for valid part number R Output Terminal Orientation U: A channel on top/ B on bottom (SSR output configurations) V: A channel on left/ B on right (Contactor output configurations) (See wiring diagrams) Derating Curves CXXX25XXXX CXXX50XXXX (25 Amps per Channel) (50 Amps per Channel) 100 Combined Load Current [Amps] Combined Load Current [Amps] 50 40 30 20 10 0 80 60 40 20 0 20 30 40 50 60 70 80 20 30 Ambient Temperature [C] 40 50 60 70 80 Ambient Temperature [C] 1.0C/W - HS13 1.5C/W - HS-2 2.0C/W - HS8.1 0.5C/W - HS053 1.0C/W - HS13 1.5C/W - HS-2 Mechanical Dimensions Tolerances: 0.02 in / 0.5 m All dimensions are in: inches [millimeters] 2.300 [58.42] 1.875 [47.63] .625 [15.89] 2X .203 [5.15] 8X .191 [4.85] IP20 1.100 [27.94] 1.425 [36.20] .803 [20.40] 1.700 [43.18] 1.800 [45.72] 2X .200 [5.08] 2.635 [66.93] 2.300 [58.42] IP00 1.100 [27.94] 1.429 [36.30] .803 [20.40] 1.700 [43.18] To view available Installation Sheet scan the QR code with your smartphone or visit www.crydom.com 1.800 [45.72] Other Crydom products and competitive part number cross-reference available at: www.crydom.com Dual Solid State Relays Available Input Connector Options MECHANICAL DIMENSIONS (shown without IP20 cover) INPUT CONNECTOR DIMENSIONS SUGGESTED MATING CONNECTORS/PLUGS 3X 0.100 [2.54] 4X 0.026 [0.66] (SQUARE) 1.429 [36.30] Pin Connector TYCO 3-640440-4 0.300 [7.62] Accepts wires: AWG #22 INPUT CONNECTOR OPTION 1 Four Pin Standard 3X 0.100 [2.54] 4X 0.026 [0.66] (SQUARE) Crimp Housing, Positive Latch 1.150 [29.21] 0.200 [5.08] 0.120 [3.05] Molex 050579404 Accepts wires: AWG #24, 0.2 mm 0.420 [10.67] INPUT CONNECTOR OPTION 2 Connector Locking Connecto 0.300 [7.62] 0.500 [12.71] Vertical Plug, Top Wire entry Molex 039500-0004 Phoenix 1840382 Dinkle EC350V-04P 0.413 [10.50] 1.059 [26.90] 1.046 [26.58] 3X 0.138 [3.50] Vertical Plug, Rear Wire entry 0.285 [7.25] Molex 39503-2004 Phoenix 1862878 Dinkle EC350RL-04P 0.157 [4.00] Vertical Plug, Front Wire entry 0.122 [3.10] INPUT CONNECTOR OPTION 3 Detachable Barriers D h bl B i w/Screws 4X 0.031 [0.80] (SQUARE) 0.606 [15.40] Molex 39503-3004 Phoenix 1863178 Dinkle EC350R-04P Vertical Spring Cage Plug, top Wire E Phoenix 1939934 Dinkle 0221-2004 All 4 options accept wires: AWG #16 to 24 N/A 1.201 [30.50] Direct Wire Accepts wires: AWG #16 to 24 INPUT CONNECTOR OPTION 4 Accessories A large variety of Heat Sinks rated from .25 to 5.0 C/W specially engineered to match the heat dissipation requirements of Crydom SSRs. Heat Transfer Pads (Thermal Pads) for single, dual and 3 phase SSRs to maximize thermal conductivity. Heat Transfer Pads Assemblies of Crydom SSRs on Crydom heat sinks are also available. SSR mounting Hardware Kits (English and Metric threads). Heat Sinks Assemblies For more information about these and other accessories please ask your Crydom authorized distributor or visit www.crydom.com/en/accessories Questions? Call or e-mail Americas +1 (877) 502 5500 sales@crydom.com Europe +44 (0) 1202 606030 sales-europe@crydom.com Dual Solid State Relays Dual Relays Mechanical Dimensions Tolerances: 0.02 in / 0.5 m All dimensions are in: inches [millimeters] AC Output 25-40 Amp 120/240/480 VAC 120/240V Model 25A & 40A Output rating per channel 120/240 & 480VAC Operating voltage rating 4-15 & 15-32 VDC Control input options Internal output snubber standard SCR output for heavy industrial loads Industry standard panel mount package 0.25 inch Faston output connectors Zero voltage or random turn-on available CE & RoHS compliant, UL & cUL recognized & VDE approved* 1 Control Voltage Range [VDC] Minimum Turn-On Voltage [VDC] Minimum Turn-Off Voltage [VDC] Typical Input Current @ 5 VDC (@ 24 VDC for E-Suffix) [mA] Nominal Input Impedance [Ohm] Maximum Turn-On Time 4 Maximum Turn-Off Time 24-280 600 10 500 40 0.15 625 600 1.6 0.63 1620 1780 0.5 48-530 1200 10 500 25 0.15 250 240 1.6 1.02 260 285 0.5 H12D48XXD DE-SUFFIX 4-15 4.0 1.0 13 300 1/2 cycle 1/2 cycle 4-15 4.0 1.0 13 240 1/2 cycle 1/2 cycle 15-32 15.0 1.0 15 1500 1/2 cycle 1/2 cycle GENERAL SPECIFICATIONS Dielectric Strength 50/60 Hz Input/Output [Vrms] Dielectric Strength 50/60 Hz Input-Output/Baseplate [Vrms] Minimum Insulation Resistance (@ 500 V DC) [Ohm] Maximum Capacitance, Input/Output [pF] Ambient Operating Temperature Range [C] Ambient Storage Temperature Range [C] Weight (typical) Encapsulation Terminals (Output / Input) 4000 2500 10 9 10 -40 to 80 -40 to 125 3.0 oz (86.5g) Thermally conductive Epoxy 0.25" Fastons / 0.025" Square Pins 1.87 [47.5] CONTROL SERIES H12D48 25 Output Voltage @ 50/60 Hz D24: 24-280 VAC H12D48: 48-530 VAC D Output Function Blank: Zero-Crossing -10: Random Turn-On -10 Control Voltage D: 4-15 VDC DE: 15-32 VDC CONTROL B 4-15VDC .85 [21.6] 1.31 [33.2] .45 [11.4] PIN .025 SQ. .100 centers 4 places 1.80 [45.7] 480V Model .250 X .032 FASTON terminal [4 places] Mounting hole/slot .0192 [4.9] DIA. 2 PLC'S A1 B2 B1 B2 120/24OV - 20 A 120/24OV - 20 A 2.30 [58.4] 1.87 [47.5] CONTROL - A CONTROL + - 1.60 [40.6] B + .77 [19.6] .85 [21.6] 1.31 [33.2] .187 X .032 FASTON terminal [4 places] 1.37 [34.8] 1.80 [45.7] Derating Curves D2425XX, H12D4825XX (25 Amps per Channel) 50 40 0.5C/W 1.0C/W 2.0C/W 5.0C/W 30 20 10 0 20 30 40 50 60 70 80 Ambient Temperature (C) D2440XX, H12D4840XX (40 Amps per Channel) Combined Load Current [Amps] Output Current per Channel 25: 25 Amps 40: 40 Amps A .59 [15.0] * D2425D & D2440D Models are also CSA approved. 1 All parameters at 25C and per channel unless otherwise specified. 2 Off-State dv/dt test method pes EIA/NARM standard RS-443, paragraph 13.11.1 3 Heat sinking required, see derating curves. 4 Turn-on time for random turn-on (-10) versions is 0.1msec. Part Number Nomenclature 120/24OV - 20A 4-15VDC 48-530 1200 10 500 40 0.15 625 600 1.6 0.63 1620 1780 0.5 D24XXD .55 [14.0] B2 A1 2.30 [58.4] FASTON terminal .250 X .032 [4 places] .15 [3.8] B1 120/24OV - 20A D2425D D2440D H12D4825D H12D4840D D2425DE D2440DE H12D4825DE H12D4840DE 1 Operating Voltage (47-63 Hz) [Vrms] 24-280 Transient Overvoltage [Vpk] 600 Maximum Off-State Leakage Current @ Rated Voltage [mArms] 10 Minimum Off-State dv/dt @ Maximum Rated Voltage [V/sec] 2 500 Maximum Load Current [Arms] 3 25 Minimum Load Current [Arms] 0.15 Maximum Surge Current (16.6ms) [Apk] @ 60 Hz 250 Maximum Surge Current (20.0ms) [Apk] @ 50 Hz 240 Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.6 Thermal Resistance Junction to Case (Rjc) [C/W] 1.02 Maximum It for Fusing (8.3 msec) [Asec] 260 Maximum It for Fusing (10 msec) [Asec] 285 Minimum Power Factor (with Maximum Load) 0.5 INPUT SPECIFICATIONS A2 Combined Load Current [Amps] OUTPUT SPECIFICATIONS 1.17 [29.7] 1.00 [25.4] Mounting hola/slot 0.192 [4.9] DIA. 80 60 0.5C/W 1.0C/W 1.5C/W 2.0C/W 40 20 0 20 30 40 50 60 70 Ambient Temperature (C) Other Crydom products and competitive part number cross-reference available at: www.crydom.com 80