G3CN Solid-state Relay Low-cost, PCB-mounting SSR for FA Equipment Requiring High Reliability Wide I/O voltage range: 3 to 28 VDC input and 75 to 264 VAC or 3 to 28 VDC input and 3 to 52.8 VDC output. Two load currents available: 2 A and 3 A Flat and vertical models available for a variety of applications. RC Ordering Information Isolation Phototriac Zero cross function Yes Indicator No Applicable output load 2 A at 75 to 264 VAC Rated input voltage 4 to 24 VDC Model G3CN-202P-US G3CN-202P1-US* 3 A at 75 to 264 VAC G3CN-203P-US G3CN-203P1-US* Phototriac No 2 A at 75 to 264 VAC 5, 12, 24 VDC G3CN-202PL-US G3CN-202PL1-US* 3 A at 75 to 264 VAC G3CN-203PL-US G3CN-203PL1-US* Photocoupler --- 2 A at 3 to 52.8 VDC 4 to 24 VDC G3CN-DX02P-US G3CN-DX02P1-US* 3 A at 3 to 52.8 VDC G3CN-DX03P-US G3CN-DX03P1-US* *Vertical models. Specifications Ratings Input Model Rated voltage Operating voltage Impedance Voltage level Must operate voltage G3CN-202P(1) G3CN-203P(1) 4 to 24 VDC 3 to 28 VDC 1.5 kW +20%/-10% 3 VDC max. G3CN-202PL(1) 5 VDC 4 to 6 VDC 390 W+20% 4 VDC max. G3CN-203PL(1) 12 VDC 9.6 to 14.4 VDC 900 W+20% 9.6 VDC max. 24 VDC 19.2 to 28.8 VDC 2 kW+20% 19.2 VDC max. 4 to 24 VDC 3 to 28 VDC 1.5 kW +20%/-10% 3 VDC max. G3CN-DX02P(1) G3CN-DX03P(1) Note: Must release voltage 1 VDC min. The input impedance is measured at the maximum value of the rated supply voltage. For example, with the model rated at 4 to 24 VDC, the input impedance is measured at 24 VDC. 1 G3CN G3CN Output Model Applicable load Rated load voltage Load current Inrush current Without heat sink G3CN-202P(1) G3CN-202PL(1) 75 to 264 VAC G3CN-203P(1) G3CN-203PL(1) G3CN-DX02P(1) 3 to 52.8 VDC G3CN-DX03P(1) 0.1 to 2 A 30 A (60 Hz, 1 cycle) 0.1 to 3 A 45 A (60 Hz, 1 cycle) 0.1 to 2 A 12 A (10 ms) 0.1 to 3 A 18 A (10 ms) Characteristics Item G3CN-202P(1)/203P(1) G3CN-202PL(1)/203PL(1) G3CN-DX02P(1)/03P(1) Operate time 1/2 of load power source cycle + 1 ms max. 1 ms max. 0.5 ms max. Release time 1/2 of load power source cycle + 1 ms max. 1/2 of load power source cycle + 1 ms max. 2 ms max. Output ON voltage drop 1.6 V (RMS) max. Leakage current 5 mA max. (at 100 VAC) 10 mA max. (at 200 VAC) Insulation resistance 100 MW min. (at 500 VDC) Dielectric strength 2,500 VAC, 50/60 Hz for 1 min Vibration resistance Malfunction: 10 to 55 Hz, 1.5-mm double amplitude Shock resistance Malfunction: 1,000 m/s2 (approx. 100G) Ambient temperature Operating: -30% to 80%C (with no icing) Storage: -30% to 100%C (with no icing) Ambient humidity Operating: 45% to 85% Weight Approx. 25 g 1.5 V max. 2.5 mA max. (at 100 VAC) 5 mA max. (at 200 VAC) Approved Standards UL114 File No.E64562/CSA C22.2 (No.0, No.14) File No. LR35535 Model Ratings G3CN-202P(L)(1)-US 2 A at 240 VAC G3CN-203P(L)(1)-US 3 A at 240 VAC G3CN-DX02P(1)-US 2 A at 48 VDC G3CN-DX03P(1)-US 3 A at 48 VDC Engineering Data Load Current vs. Ambient Temperature Characteristics Ambient temperature (%C) 2 G3CN-203P(1)/-203PL(1)/-DX03P(1) Load current (A) Load current (A) G3CN-202P(1)/-202PL(1)/-DX02P(1) Ambient temperature (%C) 5 mA max. (at 50 VDC) G3CN G3CN Inrush Current Resistivity 2-A Load Non-repetitive (Keep the inrush current to half the rated value if it occurs repetitively.) G3CN-DX02P(1) Inrush current (A. Peak) Inrush current (A. Peak) G3CN-202P(1)/-202PL(1) Energizing time (ms) Energizing time (ms) 3-A Load G3CN-DX03P(1) Inrush current (A. Peak) Inrush current (A. Peak) G3CN-203P(1)/-203PL(1) Energizing time (ms) Energizing time (ms) 3 G3CN G3CN Dimensions Note: All units are in millimeters unless otherwise indicated. Flat Model Terminal Arrangement/ Mounting Holes (Bottom View) 33 max. G3CN-20_P/-20_PL/-DX0_P 25 max. Four 1.2-dia. holes 3 1 10 14.5 20 max. max. Two, 4 dia. holes 25 12.5 Pattern 1.5 max. Two, 2 dia. holes 0.4 25+0.5 0.7 Terminal Arrangement/ Internal Connections (Bottom View) 0.7 10+0.5 12.5+0.5 + Input voltage 3 1 + (+) Input - Load (+) Load power supply - (-) 4 2 Note: Load (-) Values in parentheses apply to the DC-load versions. Vertical Model G3CN-20_P1/-20_PL1/-DX0_P1 Terminal Arrangement/ Mounting Holes (Bottom View) 33 max. Two, 2 dia. holes 14 max. Four 1.2-dia. holes 3 3 1 Pattern Pattern 5 (17.5) 27.5 5 Terminal Arrangement/ Internal Connections (Bottom View) 26.5 max. 32 max. 1.5 max. Input voltage - (17.5) 27.5+0.5 0.7 5+0.5 Load power supply + (-) (+) Load 0.4 3+1 4 3 - 2 1 + Input Note: (-) Values in parentheses apply to the DC-load versions. Precautions Refer to pages 5 to 13 for general precautions. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. 4 (+) Load