Solid State Relay G3R-I/O Compact SSRs for I/O Interface with High Dielectric Strength Requirements * High-speed models with optimum input ratings for a variety of sensors are available. * Input Modules and Output Modules that have the same footprint as the G2R. * Using a coupler approved by VDE 0884 and assuring an I/O dielectric strength of 4 kV. * Incorporating an easy-to-see monitoring indicator. * Approved by UL, CSA, and TUV. * Can be used with P2RF-05E socket for use on 35 mm DIN track. Ordering Information To Order: Select the part number and add the desired coil voltage rating, (e.g., G3R-IAZR1SN-DC5) Input Module Isolation Indicator Response speed Logic level Supply voltage Photocoupler Yes -- 4 to 32 VDC Supply current 0.1 to 100 mA Rated input voltage Model 100 to 240 VAC G3R-IAZR1SN High-speed (1 kHz) 5 VDC G3R-IDZR1SN Low-speed (10 Hz) 5 VDC 12 to 24 VDC G3R-IDZR1SN-1 12 to 24 VDC Output Module Isolation Phototriac Indicator Yes Zero cross function Yes Rated output load 2 A at 100 to 240 VAC No Photocoupler -- Solid State Relay G3R-I/O 5 to 24 VDC Model G3R-OA202SZN G3R-OA202SLN 2 A at 5 to 48 VDC G3R-ODX02SN 1.5 A at 48 to 200 VDC G3R-OD201SN Note: When ordering a TUV approved model, add "-UTU" to the model number as shown below: Example: G3R-OA202SZN-UTU. 850 Rated input I/O Indication I/O module classification and AC/DC use are indicated on the mark affixed to the top of the product. Mark indication Specification AC IN Input module, AC input DC IN Input module, DC input AC OUT Output module, AC output DC OUT Output module, DC output Mark attached to the top of the product Specifications Ratings Input Module Input Model Rated voltage Operating voltage Input current Must operate voltage Must release voltage G3R-IAZR1SN 100 to 240 VAC 60 to 264 VAC 15 mA max. 60 VAC max. 20 VAC min. G3R-IDZR1SN 5 VDC 4 to 6 VDC 8 mA max. 4 VDC max. 1 VDC min. 12 to 24 VDC 6.6 to 32 VDC 6.6 VDC max. 3.6 VDC min. 5 VDC 4 to 6 VDC 4 VDC max. 1 VDC min. 12 to 24 VDC 6.6 to 32 VDC 6.6 VDC max. 3.6 VDC min. G3R-IDZR1SN-1 Output Model G3R-IAZR1SN Logic level supply voltage 4 to 32 VDC Logic level supply current 0.1 to 100 mA G3R-IDZR1SN G3R-IDZR1SN-1 Solid State Relay G3R-I/O 851 Output Module Input Model Rated voltage G3R-OA202SZN 5 to 24 VDC Operating voltage 4 to 32 VDC Input current G3R-OA202SLN 15 mA max. (at 25C) G3R-ODX02SN 8 mA max. Must operate voltage 4 VDC max. Must release voltage 1 VDC min. G3R-OD201SN Output Model Rated load voltage G3R-OA202SZN 100 to 240 VAC Load voltage range 75 to 264 VAC Load current (see note) 0.05 to 2 A Inrush current 30 A (60 Hz, 1 cycle) G3R-OA202SLN G3R-ODX02SN 5 to 48 VDC 4 to 60 VDC 0.01 to 2 A 8 A (10 ms) G3R-OD201SN 48 to 200 VDC 40 to 200 VDC 0.01 to 1.5 A 8 A (10 ms) Note: The minimum current value is measured at 10C min. Characteristics Input Module Item G3R-IAZR1SN G3R-IDZR1SN G3R-IDZR1SN-1 Operate time 20 ms max. 0.1 ms max. 15 ms max. Release time Response frequency 20 ms max. 10 Hz 0.1 ms max. 1 kHz 15 ms max. 10 Hz Output ON voltage drop Leakage current 1.6 V max. 5 A max. Insulation resistance 100 M min. between input and output Dielectric strength Vibration resistance 4,000 VAC, 50/60 Hz for 1 min. between input and output 10 to 55 Hz, 1.5-mm double amplitude Shock resistance 1,000 m/s2 {approx. 100G} Ambient temperature Approved standards Operating: -30C to 80C (with no icing) Storage: -30C to 100C (with no icing) UL508 File No. E64562 CSA C22.2 (No. 14, No. 950) File No. LR35535 TUV File No. R9650094 (EN60950) Ambient humidity Operating: 45% to 85% Weight Approx. 18 g 852 Solid State Relay G3R-I/O Output Module Item G3R-OA202SZN G3R-OA202SLN G3R-ODX025N Operate time 1/2 of load power source cycle + 1 ms max. 1 ms max. Release time Response frequency 1/2 of load power source cycle + 1 ms max. 20 Hz 2 ms max. 100 Hz Output ON voltage drop Leakage current 1.6 V max. 1.5 mA max. 1 mA max. Insulation resistance Dielectric strength 100 M min. between input and output 4,000 VAC, 50/60 Hz for 1 min. between input and output Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude Shock resistance 1,000 m/s2 {approx. 100G} Ambient temperature Approved standards Operating: -30C to 80C (with no icing) Storage: -30C to 100C (with no icing) UL508 File No. E64562 CSA C22.2 (No. 14, No. 950) File No. LR35535 TUV File No. R9650094 (EN60950) Ambient humidity Weight Operating: 45% to 85% Approx. 18 g G3R-OA201SN 2.5 V max. Engineering Data Load Current vs. Ambient Temperature Characteristics 1.5 1.4 4-point mounting (see note 1) 2 16-point mounting (see note 2) Single-point mounting 1 0.7 0.5 --30 --20 0 20 30 40 55 60 80 Load current (A) Load current (A) 2 G3R-ODX02SN (4 to 60 VDC) 1.5 1.4 4-point mounting (see note 1) 2 16-point mounting (see note 2) Single-point mounting 1 0.5 --30 --20 100 G3R-OD201SN (40 to 200 VAC) 0 20 40 55 60 80 Load current (A) G3R-OA202SZN/OA202SLN 1.5 1.1 1 0.6 0.5 Single-point mounting 16-point mounting (see note 2) --30 --20 100 Ambient temperature (C) Ambient temperature (C) 4-point mounting (see note 1) 0 20 40 55 60 80 100 Ambient temperature (C) Note: 1. When G730-Z0M04-B is mounted. 2. When G70A-Z0C16 is mounted. Inrush Current Resistivity Non-repetitive (Keep the inrush current to half the rated value if it occurs repetitively.) G3R-ODX02SN Inrush current (A) Inrush current (A) 30 20 10 G3R-OD201SN 10 10 9 9 8 8 Inrush current (A) G3R-OA202SZN/OA202SLN 7 6 5 4 3 2 10 30 50 100 200 500 1000 Energizing time (ms) 5000 6 5 4 3 2 1 1 0 10 7 30 50 100 300 500 1000 2000 Energizing time (ms) 0 10 30 50 100 300 500 1000 2000 Energizing time (ms) Solid State Relay G3R-I/O 853 Operation Precaution of Mounting Output Modules With up to four G3R SSRs mounted closely and side by side, 2-A loads can be switched. G3R With a G3R SSRs mounted every other slot, 2-A loads can be switched. G3R G3R Dimensions Unit: mm (inch) G3R Terminal arrangement/ Internal connections (Bottom view) 1 5.2 3 0.5 29 max. 1 5 28 max. (--) 17.4 4.75 13 max. (+) 4 9.6 7.5 3 4 Load 5 4.7 Input 0.5 4.75 4 10 1 5 (--) (+) 2 20 Connecting Sockets P2RF-05-E G3R I/O Relay 59 max. 48 max. M3.5 screw PFRF-05-E Socket 3.2-dia. hole 3.5-dia. hole 62.5 ** (66.5)*** 85.5 max. M3 or 3.5-dia. hole 61 max. 854 Solid State Relay G3R-I/O ** Indicates a value when using the PFP-N Supporting Rail with the P2RF-05-E The value is 71.5 when using the PFP-N2. *** Indicates a value when using the PFP-N Supporting Rail with the P2RF-08-E The value is 75.5 when using the PFP-N2. P2R-057P 14 max. Five, 1.6-dia. hole G3R I/O Relay 32 max. P2R-057P Socket 41 max. Socket Mounting Plate Use the Socket Mounting Plate when arranging several Sockets in a row. R2.25 10 ellipses Square hole Approvals UL (File No. E64562)/CSA (File No. LR35535) Model G3R- Module type Rating IAZR1SN Input 100 to 240 VAC IDZR1SN Input 5 VDC, 12 to 24 VDC IDZR1SN-1 Input 5 VDC, 12 to 24 VDC OA202SZN Output 5 to 24 VDC OA202SLN Output 5 to 24 VDC ODX02SN Output 5 to 24 VDC OD201SN Output 5 to 24 VDC Model G3R- Module type Output rating IAZR1SN Input 32 VDC, 100 mA (General Purpose) IDZR1SN Input 32 VDC, 100 mA (General Purpose) IDZR1SN-1 Input 32 VDC, 100 mA (General Purpose) OA202SZN Output 264 VAC, 2 A (General Purpose) 264 VAC, 1 A (Tungsten) 264 VAC, 1 A FLA, 6 A LRA OA202SLN Output 264 VAC, 2 A (General Purpose) 264 VAC, 1 A (Tungsten) 264 VAC, 1 A FLA, 6 A LRA ODX02SN Output 60 VDC, 2 A (General Purpose) 60 VDC, 1 A (Tungsten) OD201SN Output 200 VDC, 1.5 A (General Purpose) 200 VDC, 0.75 A (Tungsten) Solid State Relay G3R-I/O 855 Precautions See Technical Information section at the front of the Solid State Relay section of this catalog for solid state precautions. Connection Protective element With the SSR for DC switching, the load can be connected to either positive or negative output terminal of the SSR. Since the SSR does not incorporate an overvoltage absorption component, be sure to connect an overvoltage absorption component when using the SSR under an inductive load. 856 Solid State Relay G3R-I/O MEMO Solid State Relay G3R-I/O 857 Terms and Conditions of Sale 1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed part of all quotations, acknowledgments, invoices, purchase orders and other documents, whether electronic or in writing, relating to the sale of products or services (collectively, the "Products") by Omron Electronic Components LLC ("Seller"). Seller hereby objects to any terms or conditions proposed in Buyer's purchase order or other documents which are inconsistent with, or in addition to, these Terms. 2. Prices; Payment. All prices stated are current, subject to change without notice by Seller. Buyer agrees to pay the price in effect at time of shipment. Payments for Products received are due net 30 days unless otherwise stated in the invoice. 3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (i) the invoice is paid according to Seller's payment terms and (ii) Buyer has no past due amounts owing to Seller. 4. Currencies. If the prices quoted herein are in a currency other than U.S. dollars, Buyer shall make remittance to Seller at the then current exchange rate most favorable to Seller and which is available on the due date; provided that if remittance is not made when due, Buyer will convert the amount to U.S. dollars at the then current exchange rate most favorable to Seller available during the period between the due date and the date remittance is actually made. 5. Governmental Approvals. Buyer shall be responsible for, and shall bear all costs involved in, obtaining any government approvals required for the importation or sale of the Products. 6. Taxes. All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Seller or required to be collected directly or indirectly by Seller for the manufacture, production, sale, delivery, importation, consumption or use of the Products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Seller. 7. Financial. If the financial position of Buyer at any time becomes unsatisfactory to Seller, Seller reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Seller may (without liability and in addition to other remedies) cancel any unshipped portion of Products sold hereunder and stop any Products in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 8. Cancellation; Etc. Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Seller fully against all costs or expenses arising in connection therewith. 9. Force Majeure. Seller shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 10. Shipping; Delivery. Unless otherwise expressly agreed in writing by Seller: 1. Shipments shall be by a carrier selected by Seller; 2. Such carrier shall act as the agent of Buyer and delivery to such carrier shall constitute delivery to Buyer; 3. All sales and shipments of Products shall be FOB shipping point (unless otherwise stated in writing by Seller), at which point title to and all risk of loss of the Products shall pass from Seller to Buyer, provided that Seller shall retain a security interest in the Products until the full purchase price is paid by Buyer; 4. Delivery and shipping dates are estimates only. 5. Seller will package Products as it deems proper for protection against normal handling and extra charges apply to special conditions. 11. Claims. Any claim by Buyer against Seller for shortage or damage to the Products occurring before delivery to the carrier must be presented in writing to Seller within 30 days of receipt of shipment and include the original transportation bill signed by the carrier noting that the carrier received the Products from Seller in the condition claimed. 12. Warranties. (a) Exclusive Warranty. Seller's exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Seller (or such other period expressed in writing by Seller). Seller disclaims all other warranties, express or implied. (b) Limitations. SELLER MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Seller further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Seller's sole obligation hereunder shall be to replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the noncomplying Product or, at Seller's election, to repay or credit Buyer an amount equal to the purchase price of the Product; provided that in no event shall Seller be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Seller's analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Seller before shipment. Seller shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies, or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing are not to be construed as an amendment or addition to the above warranty. 13. Limitation on Liability; Etc. SELLER SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Seller exceed the individual price of the Product on which liability is asserted. 14. Indemnities. Buyer shall indemnify and hold harmless Seller, its affiliates and its employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Products. Without limiting the foregoing, Buyer (at its own expense) shall indemnify and hold harmless Seller and defend or settle any action brought against Seller to the extent that it is based on a claim that any Product made to Buyer specifications infringed intellectual property rights of another party. 15. Property; Confidentiality. The intellectual property embodied in the Products is the exclusive property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way without the written permission of Seller. Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Seller. All information and materials supplied by Seller to Buyer relating to the Products are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. 16. Miscellaneous. (a) Waiver. No failure or delay by Seller in exercising any right and no course of dealing between Buyer and Seller shall operate as a waiver of rights by Seller. (b) Assignment. Buyer may not assign its rights hereunder without Seller's written consent. (c) Law. These Terms are governed by Illinois law (without regard to conflict of law principles). Federal and state courts in Illinois shall have exclusive jurisdiction for any dispute hereunder. (d) Amendment. These Terms constitute the entire agreement between Buyer and Seller relating to the Products, and no provision may be changed or waived unless in writing signed by the parties. (e) Severability. If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. (f) Setoff. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice.. (g) Definitions. As used herein, "including" means "including without limitation". Certain Precautions on Specifications and Use 1. Suitability for Use. Seller shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in Buyer's application or use of the Product. At Buyer's request, Seller will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer's application, product or system. Buyer shall take application responsibility in all cases but the following is a nonexhaustive list of applications for which particular attention must be given: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iii)Use in consumer products or any use in significant quantities. (iv)Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this product. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 2. Programmable Products. Seller shall not be responsible for the user's programming of a programmable product, or any consequence thereof. 3. Performance Data. Performance data given in this publication is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to Seller's Warranty and Limitations of Liability. 4. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Seller representative at any time to confirm actual specifications of purchased Product. 5. Errors and Omissions. The information in this publication has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors, or omissions. 6. RoHS Compliance. Where indicated, our products currently comply, to the best of our knowledge as of the date of this publication, with the requirements of the European Union's Directive on the Restriction of certain Hazardous Substances ("RoHS"), although the requirements of RoHS do not take effect until July 2006. These requirements may be subject to change. Please consult our website for current information. Complete "Terms and Conditions of Sale" for product purchase and use are on Omron's website at www.components.omron.com - under the "About Us" tab, in the Legal Matters section. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ELECTRONIC COMPONENTS LLC 55 E. Commerce Drive, Suite B Schaumburg, IL 60173 847-882-2288 Cat. No. JB301-E3-01 3/05 OMRON CANADA, INC. OMRON ON-LINE 885 Milner Avenue Toronto, Ontario M1B 5V8 Global - http://www.omron.com USA - http://www.components.omron.com Canada - http://www.omron.ca 416-286-6465 Specifications subject to change without notice Printed in USA