G3R-IAZR1SNAC100-240 - Omron Electronics

850 Solid State Relay G3R-I/O

Solid State Relay

G3R-I/O

Compact SSRs for I/O Interface with High

Dielectric Strength Requirements

• High-speed models with optimum input ratings for a variety of

sensors are available.

• Input Modules and Output Modules that have the same foot-

print as the G2R.

• Using a coupler approved by VDE 0884 and assuring an I/O

dielectric strength of 4 kV.

• Incorporating an easy-to-see monitoring indicator.

• Approved by UL, CSA, and TÜV.

• Can be used with P2RF-05E socket for use on 35 mm DIN

track.

Ordering Information

To Order: Select the part number and add the desired coil voltage rating, (e.g., G3R-IAZR1SN-

DC5

)

■Input Module

■Output Module

Note: When ordering a TÜV approved model, add “-UTU” to the model number as shown below:

Example: G3R-OA202SZN-UTU.

Isolation Indicator Response speed Logic level Rated input

voltage

Model

Supply voltage Supply current

Photocoupler Yes —4 to 32 VDC 0.1 to 100 mA 100 to 240 VAC G3R-IAZR1SN

High-speed

(1 kHz)

5 VDC G3R-IDZR1SN

12 to 24 VDC

Low-speed

(10 Hz)

5 VDC G3R-IDZR1SN-1

12 to 24 VDC

Isolation Indicator Zero cross

function Rated output

load

Rated input Model

Phototriac Yes Yes 2 A at 100 to 240 VAC 5 to 24 VDC G3R-OA202SZN

No G3R-OA202SLN

Photocoupler —2 A at 5 to 48 VDC G3R-ODX02SN

1.5 A at 48 to 200 VDC G3R-OD201SN

Solid State Relay G3R-I/O 851

■I/O Indication

I/O module classification and AC/DC use are indicated on the mark

affixed to the top of the product.

Specifications

■Ratings

Input Module

Input

Output

Mark indication Specification

AC IN Input module, AC input

DC IN Input module, DC input

AC OUT Output module, AC output

DC OUT Output module, DC output

Mark attached to the top of the product

Model Rated voltage Operating voltage Input current Must operate

voltage

Must release

voltage

G3R-IAZR1SN 100 to 240 VAC 60 to 264 VAC 15 mA max. 60 VAC max. 20 VAC min.

G3R-IDZR1SN 5 VDC 4 to 6 VDC 8 mA max. 4 VDC max. 1 VDC min.

12 to 24 VDC 6.6 to 32 VDC 6.6 VDC max. 3.6 VDC min.

G3R-IDZR1SN-1 5 VDC 4 to 6 VDC 4 VDC max. 1 VDC min.

12 to 24 VDC 6.6 to 32 VDC 6.6 VDC max. 3.6 VDC min.

Model Logic level supply voltage Logic level supply current

G3R-IAZR1SN 4 to 32 VDC 0.1 to 100 mA

G3R-IDZR1SN

G3R-IDZR1SN-1

852 Solid State Relay G3R-I/O

Output Module

Input

Output

Note: The minimum current value is measured at 10°C min.

Characteristics

■Input Module

Model Rated voltage Operating voltage Input current Must operate

voltage

Must release

voltage

G3R-OA202SZN 5 to 24 VDC 4 to 32 VDC 15 mA max.

(at 25°C)

4 VDC max. 1 VDC min.

G3R-OA202SLN

G3R-ODX02SN 8 mA max.

G3R-OD201SN

Model Rated load voltage Load voltage range Load current (see note) Inrush current

G3R-OA202SZN 100 to 240 VAC 75 to 264 VAC 0.05 to 2 A 30 A (60 Hz, 1 cycle)

G3R-OA202SLN

G3R-ODX02SN 5 to 48 VDC 4 to 60 VDC 0.01 to 2 A 8 A (10 ms)

G3R-OD201SN 48 to 200 VDC 40 to 200 VDC 0.01 to 1.5 A 8 A (10 ms)

Item G3R-IAZR1SN G3R-IDZR1SN G3R-IDZR1SN-1

Operate time 20 ms max. 0.1 ms max. 15 ms max.

Release time 20 ms max. 0.1 ms max. 15 ms max.

Response frequency 10 Hz 1 kHz 10 Hz

Output ON voltage drop 1.6 V max.

Leakage current 5 µA max.

Insulation resistance 100 MΩmin. between input and output

Dielectric strength 4,000 VAC, 50/60 Hz for 1 min. between input and output

Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude

Shock resistance 1,000 m/s2 {approx. 100G}

Ambient temperature Operating: -30°C to 80°C (with no icing)

Storage: -30°C to 100°C (with no icing)

Approved standards UL508 File No. E64562

CSA C22.2 (No. 14, No. 950) File No. LR35535

TÜV File No. R9650094 (EN60950)

Ambient humidity Operating: 45% to 85%

Weight Approx. 18 g

Solid State Relay G3R-I/O 853

■Output Module

Engineering Data

Load Current vs. Ambient Temperature

Characteristics

Note: 1. When G730-Z0M04-B is mounted.

2. When G70A-Z0C16 is mounted.

Inrush Current Resistivity

Non-repetitive (Keep the inrush current to half the rated value if it occurs repetitively.)

Item G3R-OA202SZN G3R-OA202SLN G3R-ODX025N G3R-OA201SN

Operate time 1/2 of load power source cycle + 1 ms max. 1 ms max.

Release time 1/2 of load power source cycle + 1 ms max. 2 ms max.

Response frequency 20 Hz 100 Hz

Output ON voltage drop 1.6 V max. 2.5 V max.

Leakage current 1.5 mA max. 1 mA max.

Insulation resistance 100 MΩmin. between input and output

Dielectric strength 4,000 VAC, 50/60 Hz for 1 min. between input and output

Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude

Shock resistance 1,000 m/s2 {approx. 100G}

Ambient temperature Operating: -30°C to 80°C (with no icing)

Storage: -30°C to 100°C (with no icing)

Approved standards UL508 File No. E64562

CSA C22.2 (No. 14, No. 950) File No. LR35535

TÜV File No. R9650094 (EN60950)

Ambient humidity Operating: 45% to 85%

Weight Approx. 18 g

1.5

-- 3 0

0.7

0.5

--20 0 20 30 40 55 60 80 100

1.5

0.5

--30--20 0 20 40 55 60 80 100 --30 --20 0 20 40 55 60 80 100

1.5

0.5

0.6

4-point mounting (see note 1)

16-point mounting (see note 2)

4-point mounting (see note 1)

16-point mounting (see note 2) 4-point mounting (see note 1)

16-point

mounting

(see note 2)

Ambient temperature (°C)

Load current (A)

Ambient temperature (°C)

Load current (A)

Ambient temperature (°C)

Load current (A)

Single-point

mounting

1.4 1.4

Single-point

mounting

1.1

Single-point

mounting

G3R-OA202SZN/OA202SLN G3R-ODX02SN (4 to 60 VDC) G3R-OD201SN (40 to 200 VAC)

10 30 50 100 200 5001000 5000

010 30 50 100 500 1000 2000

300 300

Inrush current (A)

Energizing time (ms)

Inrush current (A)

Energizing time (ms)

Inrush current (A)

Energizing time (ms)

G3R-OA202SZN/OA202SLN G3R-ODX02SN G3R-OD201SN

854 Solid State Relay G3R-I/O

Operation

■Precaution of Mounting Output Modules

Dimensions

Unit: mm (inch)

■G3R

■Connecting Sockets

P2RF-05-E

G3R G3R G3R

With up to four G3R SSRs mounted closely and

side by side, 2-A loads can be switched.

With a G3R SSRs mounted every other slot,

2-A loads can be switched.

(+)

(--)

Load

Input

13 max. 28 max. 57.5

9.6

1 5

(--) (+)

0.5

5.2

17.4

4.7

4.75

0.5

29 max.

Terminal arrangement/

Internal connections

(Bottom view)

PFRF-05-E

Socket

G3R I/O Relay

62.5 **

(66.5)**

3.2-dia. hole

M3 or 3.5-dia. hole

59 max.

48 max.

M3.5 screw

3.5-dia.

hole

85.5 max.

61 max.

** Indicates a value when using the PFP-❏N

Supporting Rail with the P2RF-05-E

The value is 71.5 when using the PFP-❏N2.

*** Indicates a value when using the PFP-❏N

Supporting Rail with the P2RF-08-E

The value is 75.5 when using the PFP-❏N2.

Solid State Relay G3R-I/O 855

P2R-057P

■Socket Mounting Plate

Use the Socket Mounting Plate when arranging several Sockets in a row.

■Approvals

UL (File No. E64562)/CSA (File No. LR35535)

G3R I/O Relay

P2R-057P Socket

Five, 1.6-dia. hole

14 max.

32 max.

41 max.

R2.25

10 ellipses

Square hole

Model G3R- Module type Rating

IAZR1SN Input 100 to 240 VAC

IDZR1SN Input 5 VDC, 12 to 24 VDC

IDZR1SN-1 Input 5 VDC, 12 to 24 VDC

OA202SZN Output 5 to 24 VDC

OA202SLN Output 5 to 24 VDC

ODX02SN Output 5 to 24 VDC

OD201SN Output 5 to 24 VDC

Model G3R- Module type Output rating

IAZR1SN Input 32 VDC, 100 mA (General Purpose)

IDZR1SN Input 32 VDC, 100 mA (General Purpose)

IDZR1SN-1 Input 32 VDC, 100 mA (General Purpose)

OA202SZN Output 264 VAC, 2 A (General Purpose)

264 VAC, 1 A (Tungsten)

264 VAC, 1 A FLA, 6 A LRA

OA202SLN Output 264 VAC, 2 A (General Purpose)

264 VAC, 1 A (Tungsten)

264 VAC, 1 A FLA, 6 A LRA

ODX02SN Output 60 VDC, 2 A (General Purpose)

60 VDC, 1 A (Tungsten)

OD201SN Output 200 VDC, 1.5 A (General Purpose)

200 VDC, 0.75 A (Tungsten)

856 Solid State Relay G3R-I/O

Precautions

See Technical Information section at the front of the Solid State Relay section of this catalog for solid state precautions.

■Connection

With the SSR for DC switching, the load can be connected to either

positive or negative output terminal of the SSR.

■Protective element

Since the SSR does not incorporate an overvoltage absorption com-

ponent, be sure to connect an overvoltage absorption component

when using the SSR under an inductive load.

Solid State Relay G3R-I/O 857

MEMO

Terms and Conditions of Sale

1. Offer ; Acceptance. These terms and conditions (these "Terms") ar e deemed

par t of all quotations, acknowledgments, invoices, purchase orders and other

documents, whether electronic or in writing, relating to the sale of products or

services (collectively, the "Products") by Omron Electronic Components LLC

("Seller"). Seller hereby objects to any terms or conditions proposed in

Buyer's purchase order or other documents which are inconsistent with, or in

addition to, these Terms.

2. Prices; Payment. All prices stated are current, subject to change without

notice by Seller. Buyer agrees to pay the price in effect at time of shipment.

Payments for Products received are due net 30 days unless otherwise stated

in the invoice.

3. Discounts. Cash discounts, if any, will apply only on the net amount of

invoices sent to Buyer after deducting transportation charges, taxes and

duties, and will be allowed only if (i) the invoice is paid according to Seller's

payment terms and (ii) Buyer has no past due amounts owing to Seller.

4. Currencies. If the prices quoted herein are in a currency other than U.S. dol-

lars, Buyer shall make remittance to Seller at the then current exchange rate

most fa vorable to Seller and which is avail ab le on the due date; provided that if

remittance is not made when due, Buyer will conver t the amount to U.S. dol-

lars at the then current exchange rate most favorable to Seller available during

the period between the due date and the date remittance is actually made.

5. Governmental Approvals. Buyer shall be responsible for, and shall bear all

costs involved in, obtaining any government approvals required for the impor-

tation or sale of the Products.

6. Taxes. All taxes, duties and other governmental charges (other than general

real property and income taxes), including any interest or penalties thereon,

imposed directly or indirectly on Seller or required to be collected directly or

indirectly by Seller for the manufacture, production, sale, delivery, impor tation,

consumption or use of the Products sold hereunder (including customs duties

and sales, excise, use, turnover and license taxes) shall be charged to and

remitted by Buyer to Seller.

7. Financial. If the financial position of Buyer at an y time becomes unsatisf actory

to Seller, Seller reserves the right to stop shipments or require satisfactory

security or payment in advance. If Buyer fails to make payment or otherwise

comply with these Terms or any related agreement, Sell er ma y (witho ut liabi lity

and in addition to other remedies) cancel any unshipped portion of Products

sold hereunder and stop any Products in transit until Buyer pays all amounts,

including amounts payable hereunder, whether or not then due, which are

owing to it by Buyer. Buyer shall in any event remain liable for all unpaid

accounts.

8. Cancellation; Etc. Orders are not subject to rescheduling or cancellation

unless Buyer indemnifies Seller fully against all costs or expenses arising in

connection therewith.

9. Force Majeure. Seller shall not be liable for any delay or failure in delivery

resulting from causes beyond its control, including earthquakes, fires, floods,

strikes or other labor disputes, shortage of labor or materials, accidents to

machinery, acts of sabotage, riots, delay in or lack of transportation or the

requirements of any government authority.

10. Shipping; Delivery. Unless otherwise expressly agreed in writing by Seller:

1. Shipments shall be by a carrier selected by Seller;

2. Such carrier shall act as the agent of Buyer and delivery to such carrier

shall constitute delivery to Buyer;

3. All sales and shipments of Products shall be FOB shipping point (unless

otherwise stated in writing by Seller), at which point title to and all risk of

loss of the Products shall pass from Seller to Buyer, provided that Seller

shall retain a security interest in the Products until the f ull purchase price is

paid by Buyer;

4. Delivery and shipping dates are estimates only.

5. Seller will package Products as it deems proper for protection against

normal handling and extra charges apply to special conditions.

11. Claims. Any claim by Buyer against Seller for shortage or damage to the

Products occurring before deliver y to the carrier must be presented in writing

to Seller within 30 days of receipt of shipment and include the original trans-

portation bill signed by the carrier noting that the carrier received the Products

from Seller in the condition claimed.

12. Warranties. (a) Exclusive Warranty. Seller's exclusive warranty is that th

Products will be free from def ects in ma terials and workmanship for a period

twelve months from the date of sale by Seller (or such other period expresse

in writing by Seller). Seller disclaims all other warranties, express or implie

(b) Limitations. SELLER MAKES NO WARRANTY OR REPRESENTATIO

EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABI

L-

ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCT

BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT TH

PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THE

INTENDED USE. Seller further disclaims all warranties and responsibility

any type f or cl aim s or expenses based on infringement by the Products or ot

erwise of any intellectual property right. (c) Buyer Remedy. Seller's sole ob

li-

gation hereunder shall be to replace (in the form originally shipped with Buy

responsible for labor charges for removal or replacement thereof) the no

complying Product or, at Seller's election, to repay or credit Buyer an amou

equal to the purchase price of the Product; provided that in no event sh

all

Seller be responsible for warranty, repair, indemnity or any other claims

expenses regarding the Products unless Seller's analysis confirms that th

Products were properly handled, stored, installed and maintained and not su

ject to contamination, abuse, misuse or inappropriate modification. Return

any Products by Buyer must be approved in writing by Seller before shipmen

Seller shall not be liable for the suitability or unsuitability or the results from th

use of Products in combination with any electrical or electronic component

circuits, system assemblies, or any other materials or substances or enviro

ments. Any advice, recommendations or information given orally or in writin

are not to be construed as an amendment or addition to the above warranty.

13. Limitation on Liability; Etc. SELLER SHALL NOT BE LIABLE FOR SPECIA

INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS O

PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CON

NECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED

CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Fur ther,

no event shall liability of Seller exceed the individual price of the Product o

which liability is asserted.

14. Indemnities. Buyer shall indemnify and hold harmless Seller, its affiliates an

its employees from and against all liabilities, losses, claims, costs an

expenses (including attorney's fees and expenses) related to any claim, inve

tigation, litigation or proceeding (whether or not Seller is a par ty) which arise

or is alleged to arise from Buyer's acts or omissions under these Ter ms or

any w ay with respect to the Products. Without limiting the foregoing, Buyer (

its own expense) shall indemnify and hold harmless Seller and def end or sett

any action brought against Seller to the extent that it is based on a claim th

any Product made to Buyer specifications infringed intellectual property righ

of another party.

15. Property; Confidentiality. The intellectual property embodied in the Products

the exclusive property of Seller and its affiliates and Buyer shall not attempt

duplicate it in any way without the written permission of Seller. Notwithstan

ing any charges to Buyer for engin eering or tooling, all engi neering and toolin

shall remain the e xclusive property of Seller. All information and materials su

plied by Seller to Buyer relating to the Products are confidential and prop

ri-

etary, and Buyer shall limit distribution thereof to its trusted employees an

strictly prevent disclosure to any third party.

16. Miscellaneous. (a) Waiver. No failure or delay by Seller in exercising any rig

and no course of dealing between Buyer and Seller shall operate as a waiv

of rights by Seller. (b) Assignment. Buyer may not assign its rights hereund

without Seller's written consent. (c) Law. These Ter ms are governed by I

lli-

nois law (without regard to conflict of law principles). Federal and state cour

in Illinois shall have exclusive jurisdiction for any dispute hereunde

(d) Amendment. These Terms constitute the entire agreement between Buy

and Seller relating to the Products, and no provision may be changed

waiv ed unless in writing signed b y the parties. (e) Se v erabili ty. If any provisio

hereof is rendered ineffective or invalid, such provision shall not invalidate an

other provision. (f) Setoff. Buyer shall have no right to set off any amoun

against the amount owing in respect of this invoice.. (g) Definitions. As use

herein, "including" means "including without limitation".

Certain Precautions on Specifications and Use

1. Suitability for Use. Seller shall not be responsible for conformity with any stan-

dards, codes or regulations which apply to the combination of the Product in

Buyer's application or use of the Product. At Buyer's request, Seller will pro-

vide applicable th ird party certification documents identifying r atings and li mita-

tions of use which apply to the Product. This information by itself is not

sufficient f or a complete determination of the suitability of the Product i n combi-

nation with the end product, machine, system, or other application or use.

Buyer shall be solely responsible for determining appropriateness of the partic-

ular Product with respect to Buyer's application, product or system. Buyer

shall take application responsibility in all cases but the following is a non-

exhaustive list of applications for which particular attention must be given:

(i) Outdoor use, uses involving potential chemical contamination or electrical

interference, or conditions or uses not described in this document.

(ii)Energy control systems, combustion systems, railroad systems, aviation

systems, medical equipment, amusement machines, vehicles, safety

equipment, and installations subject to

separate industry or government regulations.

(iii)Use in consumer products or any use in significant quantities.

(iv)Systems, machines and equipment that could present a risk to life or

property. Please know and obse rve all prohibi tio ns of use applicable to thi s

product.

NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS

RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM

AS A WHOLE HAS BEEN DES IGNED TO ADDRESS THE RISKS, AND THAT

THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE

INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.

2. Programmable Products. Seller shall not be responsible for the user's

programming of a programmable product, or any consequence thereof.

3. Performance Data. Performance data giv en in this publication is provided a

s a

guide for the user in determining suitability and does not constitute a warran

ty.

It may represen t the re sult of Sel ler's test co nditions, and the users must cor

re-

late it to actual application requirements. Actual performance is subject

Seller's Warranty and Limitations of Liability.

4. Change in Specifications. Product specifications and accessories may

changed at any time based on improvements and other reasons. It is our pra

tice to change part numbers when published ratings or features are change

or when significant construction changes are made. However, some specific

tions of the Product may be changed without any notice. When in doubt, sp

cial part numbers may be assigned to fix or estab lish k e y specifications f or y o

application. Please consult with your Seller representative at any time to co

firm actual specifications of purchased Product.

5. Errors and Omissions. The information in this publication has been carefu

lly

checked and is believed to be accurate; however, no responsibility is assum

for clerical, typographical or proofreading errors, or omissions.

6. RoHS Compliance . Where indica ted, our products currently comply, to the b

est

of our knowledge as of the date of thi s publication, with the requirements of t

European Union's Directive on the Restriction of certain Hazardous Su

stances ("RoHS"), although the requirements of RoHS do not take effect u

ntil

July 2006. These requirements may be subject to change. Please consult o

website for current information.

OMRON ON-LINE

Global - http://www.omron.com

USA - http://www.components.omron.com

Canada - http://www.omron.ca

Cat. No. JB301-E3-01 Printed in USA

OMRON CANADA, INC.

885 Milner Avenue

Toronto, Ontario M1B 5V8

416-286-6465

OMRON ELECTRONIC

COMPONENTS LLC

55 E. Commerce Drive, Suite B

Schaumburg, IL 60173

847-882-2288

3/05 Specifications subject to change without notice

Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website

at www. components.omron.com – under the “Abo ut Us” tab, in the Legal Matters section.

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.