ENW59625A5DF - PANASONIC - Datasheet.Directory

CLASSIFICATION PRODUCT SPECIFICATION

No.

DS-PAN2580-102

REV.

1.1

SUBJECT 802.15.4-MODEM PAGE 1 of 32

CUSTOMER’S CODE

PAN2580 / PAN2580ETU

PANASONIC’S CODE

ENW59625xxxF / ENW59635xxxF DATE 15.11.2012

POWER ELECTRONICS R&D CENTER

WIRELESS CONNECTIVITY

PANASONIC INDUSTRIAL DEVICES

EUROPE GmbH

APPROVED

CHECKED

DESIGNED

Product Specification

Panasonic Industrial Devices Europe GmbH

Zeppelinstrasse 19

21337 Lüneburg

Applicant / Manufacturer

Hardware

Germany

Please refer to chapter 23 Ordering Information

Applicant / Manufacturer

Software

By purchase of any of products described in this document the customer accepts the

document's validity and declares their agreement and understanding of its contents and

recommendations. Panasonic reserves the right to make changes as required without

notification

CLASSIFICATION PRODUCT SPECIFICATION

No.

DS-PAN2580-102

REV.

1.1

SUBJECT 802.15.4-MODEM PAGE 2 of 32

CUSTOMER’S CODE

PAN2580 / PAN2580ETU

PANASONIC’S CODE

ENW59625xxxF / ENW59635xxxF DATE 15.11.2012

PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de

TABLE OF CONTENTS

1. Key Features...................................................................................................................4

2. Applications for the Module.............................................................................................4

3. Description for the Module ..............................................................................................4

4. Scope of this Document..................................................................................................5

5. History for this Document................................................................................................5

6. Terminal Layout ..............................................................................................................6

7. Block Diagram.................................................................................................................8

7.1. PAN2580-868MHz.................................................................................................8

7.2. PAN2580-915MHz.................................................................................................8

8. Key Parts List..................................................................................................................9

9. Test Conditions ...............................................................................................................9

10. Absolute Maximum Ratings ............................................................................................9

11. Operating Conditions ....................................................................................................10

12. DC electrical characeristics...........................................................................................10

13. A/D converter Characteristics ....................................................................................... 11

14. AC Electrical Characteristics.........................................................................................12

15. Soldering Temperature - Time Profile for reflow soldering............................................ 13

15.1. For lead solder.....................................................................................................13

15.2. For lead free solder..............................................................................................13

16. Module Dimensions.......................................................................................................14

16.1. SMD Module PAN2580 / ENW59625xxxF........................................................... 14

16.2. Pin Header Module PAN2580ETU / ENW59635xxxF .........................................14

17. FootPrint of the Module.................................................................................................15

17.1. SMD Module PAN2580 / ENW59625xxxF........................................................... 15

17.2. PIN HEADER MODULE PAN2580ETU / ENW59635xxxF ..................................16

18. Recommended Land Pattern ........................................................................................ 17

18.1. SMD Module PAN2580 / ENW59625xxxF........................................................... 17

18.2. Pin Header Module PAN2580ETU / ENW59635xxxF .........................................18

19. Laser marking ...............................................................................................................19

20. Reliability Tests.............................................................................................................20

21. Cautions........................................................................................................................20

21.1. Design Notes .......................................................................................................20

21.2. Installation Notes .................................................................................................21

21.3. Usage Conditions Notes ......................................................................................21

21.4. Storage Notes......................................................................................................21

21.5. Safety Cautions ...................................................................................................22

21.6. Other cautions .....................................................................................................22

22. Packaging of SMD Module PAN2580 ENW59625xxxF ...............................................23

22.1. Tape Dimension................................................................................................... 23

CLASSIFICATION PRODUCT SPECIFICATION

No.

DS-PAN2580-102

REV.

1.1

SUBJECT 802.15.4-MODEM PAGE 3 of 32

CUSTOMER’S CODE

PAN2580 / PAN2580ETU

PANASONIC’S CODE

ENW59625xxxF / ENW59635xxxF DATE 15.11.2012

PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de

22.2. Packing in Tape ...................................................................................................23

22.3. Component direction............................................................................................24

22.4. Reel Dimension ...................................................................................................24

22.5. Label for Package................................................................................................25

22.6. Total Packing Handling........................................................................................ 26

22.7. Cover tape reel strength ......................................................................................26

23. Ordering Information .....................................................................................................27

24. RoHS Declaration .........................................................................................................28

25. Data Sheet Status.........................................................................................................28

26. Regulatory Information..................................................................................................28

26.1. FCC Notice ..........................................................................................................28

26.2. Caution ................................................................................................................28

26.3. Labeling Requirements........................................................................................ 29

26.4. Antenna Warning .................................................................................................29

26.5. Approved Antenna List ........................................................................................29

26.6. RF Exposure PAN2580 .......................................................................................30

27. Industry Canada Certification........................................................................................30

28. European R&TTE Declaration of Conformity ................................................................ 30

29. Related Documents.......................................................................................................31

30. General Information ......................................................................................................31

31. Life Support Policy ........................................................................................................ 32

CLASSIFICATION PRODUCT SPECIFICATION

No.

DS-PAN2580-102

REV.

1.1

SUBJECT 802.15.4-MODEM PAGE 4 of 32

CUSTOMER’S CODE

PAN2580 / PAN2580ETU

PANASONIC’S CODE

ENW59625xxxF / ENW59635xxxF DATE 15.11.2012

PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de

1. KEY FEATURES

• Available as small size SMD device (29.8mm x 19.0mm x 2.7mm) or ETU (Easy to

use) with pin header (33.9 x 33.9 x 7.3mm)

• 868MHz (Europe) or 915MHz (USA)

• 3 antenna options: Single port 50Ω, ceramic antenna or plug

• 250 kbps RF raw data rate (150kbps with SNAP®)

• Low power modes for increased battery life

• High sensitivity: -97dBm typ. @ 150kbps & 1% Packet Error Rate

• +18 dBm @ 915MHz or +13 dBm @ 868 MHz max. Pout

• programmable over a 20 dB range

• Low supply voltage (2.7 V to 3.6 V, 3.0 V typ.)

• Operating temperature range -40°C to +85°C

• 192k total Flash with 64k used by SNAP® core, 64k free for

uploadable SNAPpy scripts, and 64k reserved.

• 1 UART with HW Flow Control for control or transparent data

• 19 GPIOs and up to 18 A/D inputs with 10 Bit ADC for fast and

easy conversion from analog inputs -such as temperature,

pressure and fluid levels- to digital values.

• GFSK Modulation with FHSS (Spreading Method) when using

SNAP®, otherwise also FSK and OOK is possible

• Mesh (SNAP®) Mesh networking Topology

• Manufactured in conformance with RoHS

2. APPLICATIONS FOR THE MODULE

• Automatic Meter Reading

• Inventory management, Factory- and home automation

• Wireless Sensor Networks, e.g. L ightin g Control

• Monitoring (environmental, patient or fitness)

3. DESCRIPTION FOR THE MODULE

The PAN2580 module is a short range, low power, 868MHZ or 915MHz ISM band transceiver

which includes a complete 802.15.4 physical layer (PHY). It is designed for the IEEE

802.15.4 wireless standard. Using an appropriate microcontroller (MCU) with reference

oscillator provides a cost effective solution for short range data links and networks.

The PAN2580 use the MCU with integrated Transceiver Si100x from Silicon Labs

It comes pre-loaded with the Synapse SNAP® mesh network operating system.

Please contact your local sales office for further details on additional options and services, by

visiting www.panasonic.com/rfmodules or write an e-mail to wireless@eu.panasonic.com.

CLASSIFICATION PRODUCT SPECIFICATION

No.

DS-PAN2580-102

REV.

1.1

SUBJECT 802.15.4-MODEM PAGE 5 of 32

CUSTOMER’S CODE

PAN2580 / PAN2580ETU

PANASONIC’S CODE

ENW59625xxxF / ENW59635xxxF DATE 15.11.2012

PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de

4. SCOPE OF THIS DOCUMENT

This product specification applies to Panasonic’s 802.15.4 Modem P //

. Different versions of the PAN2580 are available (refer to chapter

AN2580

ENW59625xxxF 23).

5. HISTORY FOR THIS DOCUMENT

Revision Date Modification / Remarks

1.0 07.09.2011 Initial draft version

1.1 15.11.2012 Add Pin-Header Module PAN4580ETU

CLASSIFICATION PRODUCT SPECIFICATION

No.

DS-PAN2580-102

REV.

1.1

SUBJECT 802.15.4-MODEM PAGE 6 of 32

CUSTOMER’S CODE

PAN2580 / PAN2580ETU

PANASONIC’S CODE

ENW59625xxxF / ENW59635xxxF DATE 15.11.2012

PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de

6. TERMINAL LAYOUT

UFL Conector

(option)

PAN2580 (SMD Module)

Top view

PAN2580ETU (Pin-header Module)

Top view

Pin No.

PAN2580

Pin No.

PAN4580ETU Pin Name SNAPpy

IO1 Description

A1, A8, B8,

C8, D8, F8,

G8, H1, H8

1, 24 GND DC Power supply, 0V

A2, A3 21 VCC DC Power supply, typical 3V (2.7 ~ 3.6V)

A4 3 P2.2 11 GPIO_1, ADC18, I2C SCL

A5 4 P2.3 12 GPIO_2, ADC19

A6 16 P1.6 (7)

Not Available, Do Not Connect (used for

access to the onboard external memory)

A7 14 P1.7 (8)

Not Available, Do Not Connect (used for

access to the onboard external memory)

B4 2 P2.1 10 GPIO_0, ADC17, I2C SDA

B5 5 P2.4 13 GPIO_3, ADC20

B6 15 P1.5 (6)

Not Available, Do Not Connect (used for

access to the onboard external memory)

B7 13 P2.0 (9)

Not Available, Do Not Connect (used for

access to the onboard external memory)

C4 20 ANT_A 18 GPIO_18 (Output Only)

C5 12 P0.2_XTAL1 1 GPIO_10, ADC2, UART0 RTS Input

1 When using SNAP® Software by Synapse Wireless, Inc.

CLASSIFICATION PRODUCT SPECIFICATION

No.

DS-PAN2580-102

REV.

1.1

SUBJECT 802.15.4-MODEM PAGE 7 of 32

CUSTOMER’S CODE

PAN2580 / PAN2580ETU

PANASONIC’S CODE

ENW59625xxxF / ENW59635xxxF DATE 15.11.2012

PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de

Pin No.

PAN2580

Pin No.

PAN4580ETU Pin Name SNAPpy

IO1 Description

E3 19 GPIO_0 17 GPIO_0 (General Purpose I/O)

E8 RF IN/OUT

EZRadioPRO peripheral transmit RF output

/ input pin (only ENW59625CxxF, other

modules NC)

F4 8 P0.0_VREF 0

GPIO_6, ADC0, Interrupt, External Voltage

Reference, SPI MISO

G2 6 P2.5 14 GPIO_4, ADC21, SPI MOSI

G3 11 P0.3_XTAL1 2 GPIO_9, ADC3, UART0 CTS Output

G4 9 P0.5_RX 4

GPIO_7, ADC5, Interrupt, UART0 Rx Data

Input

G5 17 P=0.6_CNVSTR 5

GPIO_15, ADC6, External “Start

Conversion” for ADC0

H2 18 P2.7_C2D 16

GPIO_16 (limited drive strength as it is

routed through a 1Kohm resistor. The signal

driven from (or to) GPIO16 can also be read,

or driven, on pin H6, the debug pin.

H3 7 P2.6 15 GPIO_5, ADC22, SPI SCLK

H4 10 P0.4_TX 3

GPIO_8, ADC4, Interrupt, UART0 Tx Data

Output

H5 23 RESET#_C2D Module Reset, Active Low

H6 22 P2.7_C2D Background Debug Communications

B1, B2, B3,

C1, C2, C3,

C6, C7, D1,

D2, D3, D4,

D5, D6, D7,

E1, E2, E4,

E5, E6, E7,

F1, F2, F3,

F5, F6, F7,

G1, G6, G7,

NC -

CLASSIFICATION PRODUCT SPECIFICATION

No.

DS-PAN2580-102

REV.

1.1

SUBJECT 802.15.4-MODEM PAGE 8 of 32

CUSTOMER’S CODE

PAN2580 / PAN2580ETU

PANASONIC’S CODE

ENW59625xxxF / ENW59635xxxF DATE 15.11.2012

PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de

7. BLOCK DIAGRAM

7.1. PAN2580-868MHZ

(ENW59625xxCF, ENW59635xxCF)

7.2. PAN2580-915MHZ

(ENW59625xxDF, ENW59635xxDF)

CLASSIFICATION PRODUCT SPECIFICATION

No.

DS-PAN2580-102

REV.

1.1

SUBJECT 802.15.4-MODEM PAGE 9 of 32

CUSTOMER’S CODE

PAN2580 / PAN2580ETU

PANASONIC’S CODE

ENW59625xxxF / ENW59635xxxF DATE 15.11.2012

PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de

8. KEY PARTS LIST

Part Name Material

P.W.Board Glass cloth epoxide resin with gold plating

Casing Material: C7521, thickness 0.15mm

IC part name SI1000 (ENW596x5xxDF) or SI1002 (ENW596x5xxCF)

SiLabs, www.silabs.com

9. TEST CONDITIONS

Measurements are made under room temperature and humidity unless otherwise specified.

Temperature 25 ± 10°C

Humidity 40 to 85%RH

Supply voltage 3.0V

10. ABSOLUTE MAXIMUM RATINGS

The maximum ratings may not be exceeded under any circumstances, not even momentarily

and individually, as permanent damage to the module will result.

No. Item Symbol Absolute Maximum

Ratings Unit

1 Ambient Temperature under Bias Top -40 to +85 °C

2 Storage Temperature Tstg -40 to +85 °C

3 Supply voltage

(1) V

CC -0.3 to +3.6 Vdc

4 Voltage on any Px.x I/O Pin or RST with

Respect to GND Vin -0.3 to VCC+0.5

Vdc

5 Maximum Total Current through

all Px.x Pins Iin 200 mA

ESD on any pin except for optional pins

E8 (RF in/out) and UFL connector.

Human Body Model (HBM)

VTHHBM1 ±2 kV

ESD on optional pins E8 (RF in/out) and

UFL connector.

Human Body Model (HBM)

VTHHBM2 ±1 kV

8 Surface Mount Solder Reflow

Temperature TDeath Please refer to chapter

15.2.

CLASSIFICATION PRODUCT SPECIFICATION

No.

DS-PAN2580-102

REV.

1.1

SUBJECT 802.15.4-MODEM PAGE 10 of 32

CUSTOMER’S CODE

PAN2580 / PAN2580ETU

PANASONIC’S CODE

ENW59625xxxF / ENW59635xxxF DATE 15.11.2012

PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de

No. Item Symbol Absolute Maximum

Ratings Unit

9 Moisture Sensitivity Level MSL 4 (72 hours)

Notes:

(1) The supply voltage must be free of AC ripple voltage (for example from a battery or a low

noise regulator output). For noisy supply voltages, please provide a decoupling circuit (for

example a ferrite in series connection and a blocking capacitor to ground).

11. OPERATING CONDITIONS

Value

No. Item Condition / Remark Symbol Min Typ Max Unit

1 Supply voltage The typical value

is recommended VCC 2.7 3.0 3.6 Vdc

2.1 RF Frequency 915MHz Input / Output fRF 902.0 927.6 MHz

2.2 RF Frequency 868MHz (3) Input / Output fRF 868.1 868.5 MHz

3 Logic Low Level Input

Voltage V

IL 0 0.6 V

4 Logic High Level Input

Voltage V

VCC–

0.6 - V

5 Operating temperature

range T

op -40 +85 °C

12. DC ELECTRICAL CHARACERISTICS

Assume VCC = 3.0V, Tamb = 25°C if nothing else stated

Value

No. Item Condition / Remark Symbol Min Typ Max Unit

ENW596x5xxCF (868MHz) 48 65

1 Current consumption

in transmit mode ENW596x5xxDF (915MHz) ICCT - 80 100

ENW596x5xxCF (868MHz) 25 33

2 Current consumption

in receive mode ENW596x5xxDF (915MHz) ICCR - 25 33 mA

ENW596x5xxCF (868MHz)

3 Current consumption

in sleep mode(2). ENW596x5xxDF (915MHz) ICCSM - 1.5 - µA

Notes:

(2) For sleep-mode settings refer to the SNAP Reference Manual [3]

(3) In case, when SNAP Software from Synapse is used. Please ask the relevant Product

Manager in your region, in case you want to address a different band.

CLASSIFICATION PRODUCT SPECIFICATION

No.

DS-PAN2580-102

REV.

1.1

SUBJECT 802.15.4-MODEM PAGE 11 of 32

CUSTOMER’S CODE

PAN2580 / PAN2580ETU

PANASONIC’S CODE

ENW59625xxxF / ENW59635xxxF DATE 15.11.2012

PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de

13. A/D CONVERTER CHARACTERISTICS

Value

No. Item Condition / Remark Min Typ Max Unit

DC Accuracy

1 Resolution 10 bits

2 Integral Nonlinearity - ±0.5 ±1 LSB

3 Differential Nonlinearity Guaranteed Monotonic - ±0.5 ±1 LSB

4 Offset Error - ±<1 ±2 LSB

5 Full Scale Error - ±1 ±2.5 LSB

Dynamic performance (10 kHz sine-wave single-ended input, 1 dB below Full Scale, 300 ksps)

6 Signal-to-Noise Plus

Distortion 54 58 - dB

7 Signal-to-Distortion - 73 - dB

8 Spurious-Free Dynamic

Range - 75 - dB

Conversion Rate

9 SAR Conversion Clock - - 7.33 MHz

10 Conversion Time in SAR

Clocks

10-bit Mode

8-bit Mode

11 - - clock

11 Track/Hold Acquisition

Time 1.5 - - μs

12 Throughput Rate - - 300 ksps

Analog Inputs

13 ADC Input Voltage

Range Single Ended (AIN+ – GND) 0 - VREF V

Absolute Pin Voltage

with respect

to GND

Single Ended 0 - VCC V

15 Sampling Capacitance 1x Gain

0.5x Gain - 30

28 - pF

16 Input Multiplexer

Impedance - 5 - kΩ

Power Specifications

Power Supply Current

(VDD supplied to

ADC0)

Conversion Mode (300 ksps)

Tracking Mode (0 ksps) - 800

680 - μA

18 Power Supply Rejection Internal High Speed VREF

External VREF - 67

74 - dB

CLASSIFICATION PRODUCT SPECIFICATION

No.

DS-PAN2580-102

REV.

1.1

SUBJECT 802.15.4-MODEM PAGE 12 of 32

CUSTOMER’S CODE

PAN2580 / PAN2580ETU

PANASONIC’S CODE

ENW59625xxxF / ENW59635xxxF DATE 15.11.2012

PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de

14. AC ELECTRICAL CHARACTERISTICS

Limit

No. Receiver Conditions Min Typ Max Unit

1.1 1% Packet Error Rate (PER),

-85dBm required by [1] -92 -95 -

1.2 Wireless M-Bus Mode T1, T2(4) -101

1.4

RX Sensitivity

Wireless M-Bus Mode S1, S2(4) -104

dBm

2 Saturation maximum input level - 5 - dBm

3 Frequency Error

Tolerance AFC on, 1% PER - - ±70 kHz

4 Spurious Emissions - - -54 dBm

5 Image Rejection Rejection at the image frequency.

IF=937 kHz - -30 - dB

6 RSSI Resolution - ±0.5 - dB

7 ±1-Ch Offset

Selectivity - -31 - dB

8 ±2-Ch Offset

Selectivity - -35 - dB

9 ≥±3-Ch Offset

Selectivity

Desired Ref Signal 3 dB above

sensitivity, BER < 0.1%. Interferer

and desired modulated with 40

kbps ΔF = 20 kHz GFSK with BT

= 0.5, channel spacing = 150 kHz - -40 - dB

10 Blocking at 1 MHz

Offset - -52 - dB

11 Blocking at 4 MHz

Offset - -56 - dB

12 Blocking at 8 MHz

Offset

Desired Ref Signal 3 dB above

sensitivity. Interferer and desired

modulated with 40 kbps ΔF = 20

kHz GFSK with BT = 0.5 - -63 - dB

Limit

No. Transmitter Conditions Min Typ Max Unit

ENW596x5xxCF (868MHz) 15 18 22 dBm

1 Output Power (max) ENW596x5xxDF (915MHz) 9 13 16 dBm

2 Power Control Range - 19 - dB

3 Over the Air Data Rate Fixed by Synapse Software - 250 - kbps

4 2nd harmonic maximum output power - -50 -35 dBm

5 3rd harmonic maximum output power - -44 -35 dBm

6 Spurious Emissions <1GHz POUT = 11 dBm - - -54 dBm

7 Spurious Emissions >1GHz excluding harmonics - - -54 dBm

(4) When using Wireless M-Bus software, only for ENW596x5xxCF (868MHz)

CLASSIFICATION PRODUCT SPECIFICATION

No.

DS-PAN2580-102

REV.

1.1

SUBJECT 802.15.4-MODEM PAGE 13 of 32

CUSTOMER’S CODE

PAN2580 / PAN2580ETU

PANASONIC’S CODE

ENW59625xxxF / ENW59635xxxF DATE 15.11.2012

PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de

15. SOLDERING TEMPERATURE - TIME PROFILE FOR REFLOW SOLDERING

(only SMD ModulePAN2580 / ENW59625xxxF)

15.1. FOR LEAD SOLDER

Recommended temp. p rofile

for reflow soldering

Tem

[

°C

]

Time [s]

235°C max.

220 ±5°C

200°C

150 ±10°C

90 ±30s

30 +20/-10s

15.2. FOR LEAD FREE SOLDER

Our used temp. profile

for reflow soldering

Temp.[°C]

Time [s]

230°C -250°C max.

220°C

150°C – 190°C

90 ±30s

30 +20/-10s

Reflow permissible cycles: 2

Opposite side reflow is prohibited due to the module weight.

CLASSIFICATION PRODUCT SPECIFICATION

No.

DS-PAN2580-102

REV.

1.1

SUBJECT 802.15.4-MODEM PAGE 14 of 32

CUSTOMER’S CODE

PAN2580 / PAN2580ETU

PANASONIC’S CODE

ENW59625xxxF / ENW59635xxxF DATE 15.11.2012

PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de

16. MODULE DIMENSIONS

16.1. SMD MODULE PAN2580 / ENW59625XXXF

Item Dimension Tolerance Remark

Width 19.00 ± 0.25

Lenght 29.80 ± 0.25

Height 2.55 ± 0.25 With case

16.2. PIN HEADER MODULE PAN2580ETU / ENW59635XXXF

Item Dimension Tolerance Remark

Width 33.86 ± 0.25

Lenght 33.86 ± 0.25

Height 7.31 ± 0.25 With pin-header

CLASSIFICATION PRODUCT SPECIFICATION

No.

DS-PAN2580-102

REV.

1.1

SUBJECT 802.15.4-MODEM PAGE 15 of 32

CUSTOMER’S CODE

PAN2580 / PAN2580ETU

PANASONIC’S CODE

ENW59625xxxF / ENW59635xxxF DATE 15.11.2012

PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de

17. FOOTPRINT OF THE MODULE

17.1. SMD MODULE PAN2580 / ENW59625XXXF

All dimensions are in millimeters.

The outer dimensions have a tolerance of ± 0.25mm.

Mechanical Requirements

Item Limit Condition

Solderability More than 75% of the soldering area

shall be coated by solder

Reflow soldering with recommendable

temperature profile

CLASSIFICATION PRODUCT SPECIFICATION

No.

DS-PAN2580-102

REV.

1.1

SUBJECT 802.15.4-MODEM PAGE 16 of 32

CUSTOMER’S CODE

PAN2580 / PAN2580ETU

PANASONIC’S CODE

ENW59625xxxF / ENW59635xxxF DATE 15.11.2012

PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de

17.2. PIN HEADER MODULE PAN2580ETU / ENW59635XXXF

All dimensions are in millimeters.

The outer dimensions have a tolerance of ± 0.25mm.

CLASSIFICATION PRODUCT SPECIFICATION

No.

DS-PAN2580-102

REV.

1.1

SUBJECT 802.15.4-MODEM PAGE 17 of 32

CUSTOMER’S CODE

PAN2580 / PAN2580ETU

PANASONIC’S CODE

ENW59625xxxF / ENW59635xxxF DATE 15.11.2012

PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de

18. RECOMMENDED LAND PATTERN

18.1. SMD MODULE PAN2580 / ENW59625XXXF

19.00

1.10 2.40

min.

8mm

14,00

Dimensions in millimeters.

The land pattern dimensions above are meant to serve only as a guid. This information is

provided without any legal liability.

For the footprint it is recommended to use the same pad-size like the module footprint.

Please refer to chapter 17. Foot Print of the Module.

Also for the solder paste screen we recommend to use the same pad-size like for the module.

Solder paste screen cutouts (with slightly different dimensions) might be optimum depending

on your soldering process. For example, the chosen solder paste screen thickness might

have an effect. The solder screen thickness depends on your production standard. We

recommend 100µm to 120µm.

When using the antenna pad version, place the antenna on the edge of your carrier board (if

allowable).

If you have any questions on these points, please contact your local Panasonic

representative.

Before releasing the layout, we recommend to sent the schematic and layout for final check

to wireless@eu.panasonic.com.

CLASSIFICATION PRODUCT SPECIFICATION

No.

DS-PAN2580-102

REV.

1.1

SUBJECT 802.15.4-MODEM PAGE 18 of 32

CUSTOMER’S CODE

PAN2580 / PAN2580ETU

PANASONIC’S CODE

ENW59625xxxF / ENW59635xxxF DATE 15.11.2012

PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de

18.2. PIN HEADER MODULE PAN2580ETU / ENW59635XXXF

1.20

2.00

8.86

25.00

1.80

Dimensions in millimeters.

The land pattern dimensions above are meant to serve only as a guid. This information is

provided without any legal liability.

When using a module with an embedded antenna, for optimum RF performance, place the

antenna on the edge of your application PCB

If you have any questions on these points, please contact your local Panasonic

representative.

Schematics and layouts may be sent to wireless@eu.panasonic.com for final review.

CLASSIFICATION PRODUCT SPECIFICATION

No.

DS-PAN2580-102

REV.

1.1

SUBJECT 802.15.4-MODEM PAGE 19 of 32

CUSTOMER’S CODE

PAN2580 / PAN2580ETU

PANASONIC’S CODE

ENW59625xxxF / ENW59635xxxF DATE 15.11.2012

PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de

19. LASER MARKING

The 2D-Barcode contains the following information separated by a semicolon:

Pin header Module

PAN2580ETU / ENW59635xxxF

SMD Module

PAN2580 / ENW59625xxxF

Value Description

Date-code Date code in the format Year - Calender Week - Day of Week – Line -

Lot [YYWWDLL]

MAC-adress Last 8 digits of the MAC-adress

59625xxx Ordering number [8 signs; without the first 3 digits (ENW) and the last

digit (F), please refer also to chapter 23]

yyzz The identifier for the hardware release [2 signs, here yy]

and the software release [2 signs, here zz]

The point on the marking (below left) is the identifier for pin 1 of the module.

CLASSIFICATION PRODUCT SPECIFICATION

No.

DS-PAN2580-102

REV.

1.1

SUBJECT 802.15.4-MODEM PAGE 20 of 32

CUSTOMER’S CODE

PAN2580 / PAN2580ETU

PANASONIC’S CODE

ENW59625xxxF / ENW59635xxxF DATE 15.11.2012

PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de

20. RELIABILITY TESTS

The measurement should be done after being exposed to room temperature and humidity for

1 hour.

No. Item Limit Condition

1 Heat-shock-restance

test

Electrical parameter should

be in specification

Temperature:125°C to -50°C

Voltage: off

Period: 500cycles

Temp. Cycle: -50°C and +125°C each 7min.

2 Humidity load life

test the same as above

Temprerature: +85°C

Humidity: 85%

Period: 500hrs

Voltage: on

3 Vibration test the same as above

Vibration Ampl.: 1.5mm

Vibr. Freq.: 10~55~10Hz (total 1min.)

Directions: X; Y; Z each 1hrs

4 ESD test the same as above

Regarding JEDEC JESD-22a114D each

contact with 100pF, 1.5kOhm min. 1kV

(Human Body Model HBM)

5 MSL test the same as above

Pre conditioning:

Temperature: +85°V

Humidity: 85°C

Period: 96hrs

Soldering condition:

Peak: 260°C for ~10s, 2 times

21. CAUTIONS

Failure to do so may result in degrading of the product’s functions and damage to the

product.

21.1. DESIGN NOTES

(1) Please follow the conditions written in this specification, especially the control

signals of this module.

(2) The supply voltage has to be free of AC ripple voltage (for example from a

battery or a low noise regulator output). For noisy supply voltages, provide a

decoupling circuit (for example a ferrite in series connection and a blocking

capacitor to ground of at least 47uF directly at the module).

(3) This product should not be mechanically stressed when installed.

(4) Heat is the major cause of shortening the life of these products. Please keep

this product away from heat.

Avoid assembly and use of the target equipment in conditions where the

products' temperature may exceed the maximum tolerance.

(5) The supply voltage should not be exceedingly high or reversed. It should not

carry noise and/or spikes.

(6) Please keep this product away from other high frequency circuits.

CLASSIFICATION PRODUCT SPECIFICATION

No.

DS-PAN2580-102

REV.

1.1

SUBJECT 802.15.4-MODEM PAGE 21 of 32

CUSTOMER’S CODE

PAN2580 / PAN2580ETU

PANASONIC’S CODE

ENW59625xxxF / ENW59635xxxF DATE 15.11.2012

PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de

21.2. INSTALLATION NOTES

(1) Reflow soldering is possible twice based on the conditions in chapter 15.

Please set up the temperature at the soldering portion of this product

according to this reflow profile.

(2) Carefully position the products so that their heat will not burn into printed

circuit boards or affect the other components that are susceptible to heat.

(3) Carefully locate these products so that their temperatures will not increase

due to the effects of heat generated by neighboring components.

(4) If a vinyl-covered wire comes into contact with the products, then the cover

will melt and generate toxic gas, damaging the insulation. Never allow contact

between the cover and these products to occur.

(5) This product should not be mechanically stressed or vibrated when reflowed.

(6) If you want to repair your board by hand soldering, please keep the

conditions of this chapter.

(7) Please do not wash this product.

(8) Please refer to the recommended pattern when designing a board.

(9) Pressing on parts of the metal cover or fastening objects to the metal will

cause damage to the unit.

21.3. USAGE CONDITIONS NOTES

(1) Please take measures to protect the unit against static electricity.

If pulses or other transient loads (a large load applied in a short time) are

applied to the products, check and evaluate their operation befor assembly

on the final products.

(2) Please do not use dropped products.

(3) Please do not touch, damage or place dirt on the pins.

(4) Please follow the recommended condition ratings about the power supply

applied to this product.

(5) Electrode peeling strength: Do not add pressure of more than 4.9N when

soldered on PCB.

(6) Pressing on parts of the metal cover or fastening objects to the metal cover

will cause damage.

(7) These products are intended for general purpose and standard use in general

electronic equipment, such as home appliances, office equipment,

information and communication equipment.

21.4. STORAGE NOTES

(1) The module may not be stressed mechanically during storage.

(2) Do not store these products in the following conditions or the performance

characteristics of the product, such as RF performance will be adversely

affected:

(3) Storage in salty air or in an environment with a high concentration of corrosive

gas, such as Cl2, H2S, NH3, SO2, or NOX

(4) Storage in direct sunlight

(5) Storage in an environment where the temperature may be outside the range of

5°C to 35°C range, or where the humidity may be outside the 45 to 85% range.

(6) Storage of the products for more than one year after the date of delivery at your

CLASSIFICATION PRODUCT SPECIFICATION

No.

DS-PAN2580-102

REV.

1.1

SUBJECT 802.15.4-MODEM PAGE 22 of 32

CUSTOMER’S CODE

PAN2580 / PAN2580ETU

PANASONIC’S CODE

ENW59625xxxF / ENW59635xxxF DATE 15.11.2012

PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de

company if the avoidance all the above conditions (1) to (3) have been met.

(7) Storage period: Please check the adhesive strength of the embossed tape

and soldering after 6 months of storage.

(8) Please keep this product away from water, poisonous gas and corrosive gas.

(9) This product should not be stressed or shocked when transported.

(10) Please follow the specification when stacking packed crates (max. 10).

21.5. SAFETY CAUTIONS

These specifications are intended to preserve the quality assurance of products and

individual components.

Before use, check and evaluate the operation when mounted on your products. Abide

by these specifications, without deviation when using the products. These products may

short-circuit. If electrical shocks, smoke, fire, and/or accidents involving human life are

anticipated when a short circuit occurs, then provide the following failsafe functions, as a

minimum.

(1) Ensure the safety of the whole system by installing a protection circuit and a

protection device.

(2) Ensure the safety of the whole system by installing a redundant circuit or

another system to prevent a single fault causing an unsafe status.

21.6. OTHER CAUTIONS

(1) This specification sheet is copyrighted. Please do not disclose it to a third

party.

(2) Please do not use the products for other purposes than those listed.

(3) Be sure to provide an appropriate fail-safe function on your product to prevent

an additional damage that may be caused by the abnormal function or the

failure of the product.

(4) This product has not been manufactured with any ozone chemical controlled

under the Montreal Protocol.

(5) These products are not intended for other uses, other than under the special

conditions shown below. Before using these products under such special

conditions, check their performance and reliability under the said special

conditions carefully to determine whether or not they can be used in such a

manner.

(6) In liquid, such as water, salt water, oil, alkali, or organic solvent, or in places

where liquid may splash.

(7) In direct sunlight, outdoors, or in a dusty environment

(8) In an environment where condensation occurs.

(9) In an environment with a high concentration of harmful gas (e.g. salty air, HCl,

Cl2, SO2, H2S, NH3, and NOX)

(10) If an abnormal voltage is applied due to a problem occurring in other

components or circuits, replace these products with new products because

they may not be able to provide normal performance even if their electronic

characteristics and appearances appear satisfactory.

(11) When you have any question or uncertainty, both of you and Panasonic

sincerely cope with it.

CLASSIFICATION PRODUCT SPECIFICATION

No.

DS-PAN2580-102

REV.

1.1

SUBJECT 802.15.4-MODEM PAGE 23 of 32

CUSTOMER’S CODE

PAN2580 / PAN2580ETU

PANASONIC’S CODE

ENW59625xxxF / ENW59635xxxF DATE 15.11.2012

PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de

22. PACKAGING OF SMD MODULE PAN2580 ENW59625XXXF

22.1. TAPE DIMENSION

Measured from centreline of sprocket hole

to centreline of pocket.

Cumulative tolerance of 10 sprocket

holes is ± 0.20 .

Measured from centreline of sprocket

hole to centreline of pocket.

(I)

(II)

(III)

(IV)

Other material available.

ALL DIMENSIONS IN MILLIMETRES UNLESS OTHERWISE STATED.

F+/- 0.15

+/- 0.10

+/- 0.30

20.20

40.40

44.00

+/- 0.20

3.80Ko

Bo 30.20 +/- 0.10

+/- 0.10

28.00P1

Ao +/- 0.10

19.40

2.95 +/- 0.10

Estimated max. length : 50

meter/22B6 reel

Forming format : Flatbed - 8

So W

F (III)

1.75 ±0.10

2.00 ±0.15 (I)

4.00 ±0.10 (II)

Ø1.55 ±0.05

Ø2.00 min.

Typ. R

0.30

P1 Ao

0.35 ±0.05

SECTION Y-Y

SCALE 1.45 : 1

0.20 ±0.05

R0.75

DETAIL A

SCALE 6 : 1

22.2. PACKING IN TAPE

trailer (empty)

1 x circumference /hub

(min 160mm)

component

packed area

standard

500pcs

leader (empty)

minimum 10 pitch

Top cover tape more

than 1 x circumference

plus 100mm to avoid

fixing of tape end on

sealed modules.

Empty spaces in component packed area shall be less than two per reel and those

spaces shall not be consecutive.

Top cover tape shall not be found on reel holes and shall not stick out from reel.

CLASSIFICATION PRODUCT SPECIFICATION

No.

DS-PAN2580-102

REV.

1.1

SUBJECT 802.15.4-MODEM PAGE 24 of 32

CUSTOMER’S CODE

PAN2580 / PAN2580ETU

PANASONIC’S CODE

ENW59625xxxF / ENW59635xxxF DATE 15.11.2012

PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de

22.3. COMPONENT DIRECTION

Please refer also to chapter 18. Labeling Drawing

22.4. REEL DIMENSION

CLASSIFICATION PRODUCT SPECIFICATION

No.

DS-PAN2580-102

REV.

1.1

SUBJECT 802.15.4-MODEM PAGE 25 of 32

CUSTOMER’S CODE

PAN2580 / PAN2580ETU

PANASONIC’S CODE

ENW59625xxxF / ENW59635xxxF DATE 15.11.2012

PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de

22.5. LABEL FOR PACKAGE

The label below shows only an example.

ENW59625xxxF

500

(3P):PAN2580

Customer Code

(1T): Lotcode [YYWWDLL]

YY year above 08

WW normal calendar week above 01

D day above 5 (Friday)

L line identifier, if more as one actual 1

L lot identifier per day e.g. 1, 2, 3

(1P) Customer Order Code, if any, otherwise put company name on it.

(2P) Panasonic Part Number, please refer to chapter 23 Ordering Information

(3P) Module type

(9D) Datecode as [2xYear, 2xMonth, 2xDay]

(Q) Quantity [XXXX], variable

(HW/SW) Hardware /Software Release identifier

[[G]] Identifier that the product is RoHS conform, please refer to chapter 24.

CLASSIFICATION PRODUCT SPECIFICATION

No.

DS-PAN2580-102

REV.

1.1

SUBJECT 802.15.4-MODEM PAGE 26 of 32

CUSTOMER’S CODE

PAN2580 / PAN2580ETU

PANASONIC’S CODE

ENW59625xxxF / ENW59635xxxF DATE 15.11.2012

PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de

22.6. TOTAL PACKING HANDLING

22.7. COVER TAPE REEL STRENGTH

Force direction

Speed = 300mm/min.

Cover tape reel strength

=0.098~0.68N (10~70g)

θ= 10deg

CLASSIFICATION PRODUCT SPECIFICATION

No.

DS-PAN2580-102

REV.

1.1

SUBJECT 802.15.4-MODEM PAGE 27 of 32

CUSTOMER’S CODE

PAN2580 / PAN2580ETU

PANASONIC’S CODE

ENW59625xxxF / ENW59635xxxF DATE 15.11.2012

PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de

23. ORDERING INFORMATION

No. Ordering part

number

Module-Type Connection-

Type

Frequency Output

Power RF-output Software

1 ENW59625A1CF PAN2580M-868A SMD 868MHz 13dBm

Ceramic

Antenna no (5)

2 ENW59625A5CF PAN2580M-868A

SMD 868MHz 13dBm Ceramic

Antenna SNAP (6)

3 ENW59625B1CF PAN2580M-868B

SMD 868MHz 13dBm UFL-

Connector no (5)

4 ENW59625B5CF PAN2580M-868B

SMD 868MHz 13dBm UFL-

Connector SNAP (6)

5 ENW59625C1CF PAN2580M-868C

SMD 868MHz 13dBm Output-

Pin no (5)

6 ENW59625C5CF PAN2580M-868C

SMD 868MHz 13dBm Output-

Pin SNAP (6)

7 ENW59625A1DF PAN2580H-915A

SMD 915MHz 18dBm

Ceramic

Antenna no (5)

8 ENW59625A5DF PAN2580H-915A

SMD 915MHz 18dBm Ceramic

Antenna SNAP (6)

9 ENW59625B1DF PAN2580H-915B

SMD 915MHz 18dBm UFL-

Connector no (5)

10 ENW59625B5DF PAN2580H-915B SMD 915MHz 18dBm UFL-

Connector SNAP (6)

11 ENW59625C1DF PAN2580H-915C SMD 915MHz 18dBm Output-

Pin no (5)

12 ENW59625C5DF PAN2580H-915C SMD 915MHz 18dBm

Output-

Pin SNAP (6)

13 ENW59635A1CF PAN2580ETU8MA Pin-Header

868MHz 13dBm Ceramic

Antenna no (5)

14 ENW59635A5CF PAN2580ETU8MA Pin-Header 868MHz 13dBm Ceramic

Antenna SNAP (6)

15 ENW59635B1CF PAN2580ETU8MB Pin-Header 868MHz 13dBm UFL-

Connector no (5)

16 ENW59635B5CF PAN2580ETU8MB Pin-Header 868MHz 13dBm UFL-

Connector SNAP (6)

17 ENW59635A1DF PAN2580ETU9HA Pin-Header 915MHz 18dBm Ceramic

Antenna no (5)

18 ENW59635A5DF PAN2580ETU9HA Pin-Header 915MHz 18dBm Ceramic

Antenna SNAP (6)

19 ENW59635B1DF PAN2580ETU9HB

Pin-Header 915MHz 18dBm UFL-

Connector no (5)

20 ENW59635B5DF PAN2580ETU9HB

Pin-Header 915MHz 18dBm UFL-

Connector SNAP (6)

(5) Without software. 64kbyte (SI100x) + 128kbyte (EEprom) of free In-System Flash Memory

(6) Synapse SNAP software included, please refer also to [3]. 192kbyte Flash Memory, with

64kbyte used by SNAP core, 64kbyte free for uploadable SNAPpy scripts and 64k reserved.

CLASSIFICATION PRODUCT SPECIFICATION

No.

DS-PAN2580-102

REV.

1.1

SUBJECT 802.15.4-MODEM PAGE 28 of 32

CUSTOMER’S CODE

PAN2580 / PAN2580ETU

PANASONIC’S CODE

ENW59625xxxF / ENW59635xxxF DATE 15.11.2012

PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de

24. ROHS DECLARATION

Declaration of environmental compatibility for supplied products:

Hereby we declare to our best present knowledge based on declaration of our suppliers that

this product does not contain the following substances which are banned by Directive

2002/95/EC (RoHS) or contains a maximum concentration of 0.1% by weight in

homogeneous materials for

• Lead and lead compounds

• Mercury and mercury compounds

• Chromium (VI)

• PBB (polybrominated biphenyl) category

• PBDE (polybrominated biphenyl ether) category

And a maximum concentration of 0.01% by weight in homogeneous materials for

• Cadmium and cadmium compounds

25. DATA SHEET STATUS

This data sheet contains data from the PRELIMINARY specification. Supplementary data will

be published at a later date. Panasonic Electronic Devices Europe GmbH reserves the right

to change the specification without notice, in order to improve the design and supply the best

possible product.

Please consult the most recently issued data sheet before initiating or completing a design.

If there is an update, please download under: PAN2580 Latest Data Sheet!

26. REGULATORY INFORMATION

26.1. FCC NOTICE

The device PAN2580, including the ceramic antenna (ENW59625AxDF) and also the

SMD type (ENW59625CxDF), including with the antennas, which are listed in 26.5,

complies with Part 15 of the FCC Rules.

The device meets the requirements for modular transmitter approval as detailed in FCC

public Notice DA00-1407.transmitter Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) This device must accept

any interference received, including interference that may cause undesired operation.

26.2. CAUTION

The FCC requires the user to be notified that any changes or modifications made to this

device that are not expressly approved by Panasonic Electronic Devices Europe GmbH

may void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

CLASSIFICATION PRODUCT SPECIFICATION

No.

DS-PAN2580-102

REV.

1.1

SUBJECT 802.15.4-MODEM PAGE 29 of 32

CUSTOMER’S CODE

PAN2580 / PAN2580ETU

PANASONIC’S CODE

ENW59625xxxF / ENW59635xxxF DATE 15.11.2012

PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

26.3. LABELING REQUIREMENTS

The Original Equipment Manufacturer (OEM) must ensure that FCC labeling

requirements are met. This includes a clearly visible label (laser marking) on the outside

of the OEM enclosure specifying the appropriate Panasonic FCC identifier for this

product as well as the FCC Notice above. The FCC identifier is FCC ID: T7V-2580.

In any case end product must be labelled exterior with "Contains FCC ID: T7V-2580"

26.4. ANTENNA WARNING

The related part number for this device is ENW59625BxDF (PAN2580 with U.FL

connector) and ENW59625CxDF (PAN2580 with SMD pad). For details, please see the

chapter 23. Ordering Information. This device is tested with a standard SMA connector

and with the antennas listed below. When integrated in the OEMs product, these fixed

antennas require installation preventing end-users from replacing them with non-

approved antennas. Any antenna not in the following table must be tested to comply

with FCC Section 15.203 for unique antenna connectors and Section 15.247 for

emissions. The FCC identifier for this device with the antenna listed in item 1 are the

same (FCC ID: T7V-2580).

26.5. APPROVED ANTENNA LIST

Note: We are able to qualify your antenna and will add to this list as that process is completed.

Item Part Number Manufacturer Frequency Band Type Average Gain

1 0915AT43A0026 Johanson 902 – 928 MHz ceramic chip

antenna -4dBi

2 TB2-900D-MMCX 890 – 960 MHz external

dedicated +2dBi

CLASSIFICATION PRODUCT SPECIFICATION

No.

DS-PAN2580-102

REV.

1.1

SUBJECT 802.15.4-MODEM PAGE 30 of 32

CUSTOMER’S CODE

PAN2580 / PAN2580ETU

PANASONIC’S CODE

ENW59625xxxF / ENW59635xxxF DATE 15.11.2012

PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de

26.6. RF EXPOSURE PAN2580

To comply with FCC RF Exposure requirements, the Original Equipment Manufacturer

(OEM) must ensure that the approved antenna in the previous table must be installed.

The preceding statement must be included as a CAUTION statement in manuals for

products operating with the approved antennas in the previous table to alert users on

FCC RF Exposure compliance.

Any notification to the end user of installation or removal instructions about the

integrated radio module is not allowed.

The radiated output power of PAN2580 with mounted ceramic antenna

(FCC ID: T7V-2580) is below the FCC radio frequency exposure limits. Nevertheless,

the PAN2580 shall be used in such a manner that the potential for human contact

during normal operation is minimized.

End users may not be provided with the module installation instructions. OEM

integrators and end users must be provided with transmitter operating conditions for

satisfying RF exposure compliance.

27. INDUSTRY CANADA CERTIFICATION

PAN2580 is licensed to meet the regulatory requirements of Industry Canada (IC), license:

IC: 216Q-2580

Manufacturers of mobile, fixed or portable devices incorporating this module are advised to

clarify any regulatory questions and ensure compliance for SAR and/or RF exposure limits.

Users can obtain Canadian information on RF exposure and compliance from

www.ic.gc.ca.

This device has been designed to operate with the antennas listed in Table 26.5 above.

Antennas not included in this list are strictly prohibited for use with this device. The

required antenna impedance is 50 ohms. The antenna used for this transmitter must not be

co-located or operating in conjunction with any other antenna or transmitter.

28. EUROPEAN R&TTE DECLARATION OF CONFORMITY

Hereby, Panasonic Electronic Devices Europe GmbH, declares that the module PAN2580

and their versions is in compliance with the essential requirements and other relevant

provisions of Directive 1999/5/EC. As a result of the conformity assessment procedure

described in Annex III of the Directive 1999/5/EC, the end-customer equipment should be

labelled as follows:

PAN2580 and their versions in the specified reference design can be used in the following

countries: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,

Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Poland,

Portugal, Slovakia, Slovenia, Spain, Sweden, The Netherlands, the United Kingdom,

Switzerland, and Norway.

CLASSIFICATION PRODUCT SPECIFICATION

No.

DS-PAN2580-102

REV.

1.1

SUBJECT 802.15.4-MODEM PAGE 31 of 32

CUSTOMER’S CODE

PAN2580 / PAN2580ETU

PANASONIC’S CODE

ENW59625xxxF / ENW59635xxxF DATE 15.11.2012

PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de

29. RELATED DOCUMENTS

For an update, please search in the suitable homepage.

[1] IEEE Standard 802.15.4 –2003 Wireless Medium Access Control (MAC) and Physical

Layer (PHY) Specifications for Low-Rate Wireless Personal Area Networks (LR-

WPANs)

[2] Technical Datasheet Si1000/1/2/3/4/5 Rev. 1.0 9/10

You can download the latest datasheet from the SiLabs homepage here.

[3] Manual to the Evaluation Kit from Synapse, which fits to module hardware from

Panasonic [Downloads: SNAP® Reference Manual Updated 10/2/2008; SNAP

Hardware Technical Manual Updated 10/2/2008]

Each new release from Synapse, will be posted here. Be sure to be registered free

under http://forums.synapse-wireless.com.

30. GENERAL INFORMATION

This product description does not claim to be complete and free of mistakes.

Please contact the related product manager with any errata inquries.

If we deliver samples to the customer, these samples have the status Engineering

Samples. This means, the design of this product is not yet completed. Engineering

Samples may be partially or fully functional, and there may be differences published in the

Data Sheet.

Engineering Samples are not qualified and are not to be used for reliability testing or series

production.

Disclaimer:

Customer acknowledges that samples may deviate from the Data Sheet and may bear

defects due to their status of development and the lack of qualification mentioned above.

Panasonic Electronic Devices Europe GmbH disclaims any liability or product warranty for

Engineering Samples. In particular, Panasonic Electronic Devices Europe GmbH disclaims

liability for damages caused by

• the use of the Engineering Sample other than for Evaluation Purposes, particularly the

installation or integration in an other product to be sold by Customer,

• deviation or lapse in function of Engineering Sample,

• improper use of Engineering Samples.

Panasonic Electronic Devices Europe GmbH disclaimes any liability for consequential and

incidental damages. In case of any questions, please contact your local sales partner or

the related product manager.

CLASSIFICATION PRODUCT SPECIFICATION

No.

DS-PAN2580-102

REV.

1.1

SUBJECT 802.15.4-MODEM PAGE 32 of 32

CUSTOMER’S CODE

PAN2580 / PAN2580ETU

PANASONIC’S CODE

ENW59625xxxF / ENW59635xxxF DATE 15.11.2012

PANASONIC INDUSTRIAL DEVICES EUROPE GMBH www.pideu.panasonic.de

31. LIFE SUPPORT POLICY

This Panasonic Electronic Devices Europe GmbH product is not designed for use in life

support appliances, devices, or systems where malfunction can reasonably be expected to

result in a significant personal injury to the user, or as a critical component in any life

support device or system whose failure to perform can be reasonably expected to cause

the failure of the life support device or system, or to affect its safety or effectiveness.

Customers using or selling these products for use in such applications do so at their own

risk and agree to fully indemnify Panasonic Electronic Devices Europe GmbH for any

damages resulting.