100 Davids Drive, Hauppauge, NY 11788
TEL.: (631) 439-9220 • FAX: (631) 436-7430
e-mail: components@miteq.com • www.miteq.com
AM-1594 051507
MITEQ AM-1594 SERIES AMPLIFIER
GAIN VAR. IMPED. NOISE P1 dB NOM. DC
FREQUENCY MODEL (dB) (±dB) VSWR IN/OUT FIGURE (dBm) POWER OUTLINE
(MHz) NUMBER (Min.) (Max.) (Max.) (Ohms) (dB, Typ.) (Typ.) VOLTS (mA) NO.
0.3–3000 AM-1594 51 3.5 2.0:1 50/50 3.3 18 15 195 3
Gain (dB)
49
50
51
52
53
54
55
56
57
58
59
0.3 300 600 900 1200 1500 1800 2100 2400 2700 3000
Frequency (MHz)
Gain (dB)
Input & Output Return Loss (dBRL)
-40
-35
-30
-25
-20
-15
-10
-5
0
0.3 300 600 900 1200 1500 1800 2100 2400 2700 3000
Frequency (MHz)
dB Return Loss
Reverse Isolation (dB)
-120
-110
-100
-90
-80
-70
-60
0 300 600 900 1200 1500 1800 2100 2400 2700 3000
Frequency (MHz)
Isolation
Output -1dB Gain Compression (+dBm)
10
12
14
16
18
20
22
0.1 0.3 1.0 10 50 100 500 1000 1500 2000 2500 3000
Frequency (MHz)
P1dB
Noise Figure (dB)
2.0
2.5
3.0
3.5
4.0
4.5
10 50 100 250 500 1000 1500 2000 2500 3000
Frequency (MHz)
Noise Figure
Low Frequency Gain Rolloff (dB)
-6.0
-5.0
-4.0
-3.0
-2.0
-1.0
0.0
1.0
100 120 200 360 500
Frequency (KHz)
Gain Rolloff
Output
Input
ISO 9001:2000 Certified • General Infomation • Warranty
100 Davids Drive, Hauppauge, NY 11788
TEL.: (631) 439-9220 • FAX: (631) 436-7430
e-mail: components@miteq.com • www.miteq.com
AM-1594 051507
MITEQ AM-1594 SERIES AMPLIFIER
Freq.
(MHz)
Gain
(dB)
0.3 53.4
15 54.7
30 54.8
45 55.0
60 55.0
75 55.3
90 55.3
105 55.3
120 55.3
135 55.3
150 55.3
165 55.3
180 55.3
195 55.3
210 55.3
225 55.3
240 55.3
255 55.3
270 55.3
285 55.3
300 55.3
315 55.3
330 55.3
345 55.3
360 55.3
375 55.3
390 55.3
405 55.2
420 55.2
435 55.2
450 55.2
465 55.2
480 55.2
495 55.2
510 55.2
525 55.2
540 55.1
555 55.1
570 55.1
585 55.1
600 55.1
615 55.1
630 55.1
645 55.1
660 55.1
675 55.1
690 55.0
705 55.0
720 55.0
735 55.0
750 55.0
765 55.0
780 55.0
795 55.0
810 55.0
825 55.0
840 55.0
855 54.9
870 54.9
885 54.9
900 54.9
915 54.9
930 54.9
945 54.9
Freq.
(MHz)
Gain
(dB)
960 54.9
975 54.9
990 54.9
1005 54.9
1020 54.9
1035 54.9
1050 54.9
1065 54.9
1080 54.9
1095 54.9
1110 54.9
1125 54.9
1140 54.9
1155 54.9
1170 54.9
1185 54.8
1200 54.8
1215 54.8
1230 54.8
1245 54.8
1260 54.8
1275 54.8
1290 54.8
1305 54.8
1320 54.8
1335 54.8
1350 54.8
1365 54.8
1380 54.8
1395 54.8
1410 54.8
1425 54.8
1440 54.8
1455 54.7
1470 54.7
1485 54.7
1500 54.7
1515 54.7
1530 54.7
1545 54.7
1560 54.6
1575 54.6
1590 54.6
1605 54.6
1620 54.6
1635 54.5
1650 54.5
1665 54.5
1680 54.5
1695 54.4
1710 54.4
1725 54.4
1740 54.4
1755 54.3
1770 54.3
1785 54.3
1800 54.3
1815 54.2
1830 54.2
1845 54.2
1860 54.2
1875 54.1
1890 54.1
1905 54.1
Freq.
(MHz)
Gain
(dB)
1920 54.0
1935 54.0
1950 54.0
1965 54.0
1980 53.9
1995 53.9
2010 53.9
2025 53.9
2040 53.8
2055 53.8
2070 53.8
2085 53.8
2100 53.8
2115 53.8
2130 53.8
2145 53.7
2160 53.7
2175 53.7
2190 53.7
2205 53.7
2220 53.7
2235 53.7
2250 53.7
2265 53.7
2280 53.7
2295 53.8
2310 53.8
2325 53.8
2340 53.8
2355 53.8
2370 53.9
2385 53.9
2400 53.9
2415 53.9
2430 54.0
2445 54.0
2460 54.0
2475 54.0
2490 54.0
2505 54.0
2520 54.0
2535 54.0
2550 54.0
2565 54.0
2580 54.0
2595 54.0
2610 54.0
2625 54.0
2640 53.9
2655 53.9
2670 53.9
2685 53.8
2700 53.8
2715 53.7
2730 53.6
2745 53.6
2760 53.5
2775 53.4
2790 53.3
2805 53.2
2820 53.0
2835 52.9
2850 52.8
2865 52.6
Freq.
(MHz)
Gain
(dB)
2880 52.4
2895 52.3
2910 52.1
2925 51.9
2940 51.8
2955 51.6
2970 51.4
2985 51.2
3000 51.0
100 Davids Drive, Hauppauge, NY 11788
TEL.: (631) 439-9220 • FAX: (631) 436-7430
e-mail: components@miteq.com • www.miteq.com
AM-1594 051507
MITEQ AM-1594 SERIES AMPLIFIER
Freq.
(MHz)
Input
VSWR
(dBRL)
Output
VSWR
(dBRL)
0.3 -30 -17
15 -45 -18
30 -42 -18
45 -45 -20
60 -44 -19
75 -48 -19
90 -46 -19
105 -46 -19
120 -44 -19
135 -44 -19
150 -49 -19
165 -50 -18
180 -50 -18
195 -51 -18
210 -50 -18
225 -48 -18
240 -47 -18
255 -45 -18
270 -44 -18
285 -42 -18
300 -41 -18
315 -40 -18
330 -39 -18
345 -37 -18
360 -37 -18
375 -36 -18
390 -35 -17
405 -34 -17
420 -34 -17
435 -33 -17
450 -33 -17
465 -32 -17
480 -31 -18
495 -30 -17
510 -30 -17
525 -29 -17
540 -29 -17
555 -28 -17
570 -28 -17
585 -28 -16
600 -27 -16
615 -27 -16
630 -26 -16
645 -26 -16
660 -25 -16
675 -25 -16
690 -25 -16
705 -24 -16
720 -24 -16
735 -24 -16
750 -24 -16
765 -23 -16
780 -23 -16
795 -23 -15
810 -23 -15
825 -22 -15
840 -22 -15
855 -22 -15
870 -22 -15
885 -21 -15
900 -21 -15
915 -21 -15
930 -21 -15
Freq.
(MHz)
Input
VSWR
(dBRL)
Output
VSWR
(dBRL)
945 -21 -15
960 -21 -15
975 -20 -15
990 -20 -15
1005 -20 -15
1020 -20 -15
1035 -20 -15
1050 -19 -15
1065 -19 -15
1080 -19 -15
1095 -19 -15
1110 -19 -15
1125 -18 -15
1140 -18 -15
1155 -18 -15
1170 -18 -15
1185 -18 -15
1200 -18 -15
1215 -18 -15
1230 -18 -15
1245 -18 -15
1260 -18 -15
1275 -18 -15
1290 -18 -15
1305 -18 -15
1320 -18 -15
1335 -18 -15
1350 -18 -15
1365 -18 -15
1380 -18 -15
1395 -18 -15
1410 -18 -15
1425 -18 -15
1440 -18 -15
1455 -18 -15
1470 -18 -15
1485 -18 -15
1500 -18 -15
1515 -18 -15
1530 -18 -15
1545 -18 -15
1560 -18 -15
1575 -18 -15
1590 -18 -15
1605 -18 -15
1620 -18 -15
1635 -19 -15
1650 -19 -15
1665 -19 -15
1680 -19 -15
1695 -19 -15
1710 -19 -15
1725 -19 -15
1740 -20 -15
1755 -20 -15
1770 -20 -15
1785 -20 -15
1800 -20 -15
1815 -20 -16
1830 -21 -16
1845 -21 -16
1860 -21 -16
1875 -22 -16
Freq.
(MHz)
Input
VSWR
(dBRL)
Output
VSWR
(dBRL)
1890 -22 -16
1905 -22 -16
1920 -22 -16
1935 -22 -15
1950 -23 -15
1965 -23 -15
1980 -23 -15
1995 -24 -15
2010 -24 -15
2025 -25 -15
2040 -25 -15
2055 -26 -15
2070 -26 -15
2085 -27 -15
2100 -27 -15
2115 -27 -15
2130 -28 -15
2145 -28 -14
2160 -28 -14
2175 -29 -14
2190 -30 -14
2205 -31 -14
2220 -32 -14
2235 -32 -14
2250 -33 -14
2265 -34 -14
2280 -35 -13
2295 -36 -13
2310 -37 -13
2325 -37 -13
2340 -36 -13
2355 -35 -13
2370 -35 -13
2385 -33 -13
2400 -33 -12
2415 -33 -12
2430 -32 -12
2445 -32 -12
2460 -32 -12
2475 -31 -12
2490 -30 -12
2505 -29 -11
2520 -29 -11
2535 -29 -11
2550 -28 -11
2565 -27 -11
2580 -26 -11
2595 -26 -11
2610 -25 -11
2625 -25 -11
2640 -25 -10
2655 -25 -10
2670 -25 -10
2685 -25 -10
2700 -25 -10
2715 -25 -10
2730 -24 -10
2745 -24 -10
2760 -24 -10
2775 -24 -10
2790 -24 -10
2805 -24 -10
2820 -25 -10
Freq.
(MHz)
Input
VSWR
(dBRL)
Output
VSWR
(dBRL)
2835 -25 -10
2850 -25 -10
2865 -26 -10
2880 -25 -10
2895 -26 -10
2910 -26 -10
2925 -26 -10
2940 -27 -10
2955 -27 -10
2970 -26 -10
2985 -26 -10
3000 -25 -10
100 Davids Drive, Hauppauge, NY 11788
TEL.: (631) 439-9220 • FAX: (631) 436-7430
e-mail: components@miteq.com • www.miteq.com
AM-1594 051507
MITEQ AM-1594 SERIES AMPLIFIER
Freq Isol
0.3 -87
15 -88
30 -88
45 -89
60 -89
75 -89
90 -88
105 -88
120 -88
135 -88
150 -89
165 -89
180 -89
195 -90
210 -90
225 -90
240 -90
255 -90
270 -90
285 -90
300 -90
315 -89
330 -89
345 -89
360 -90
375 -89
390 -90
405 -89
420 -90
435 -89
450 -89
465 -89
480 -89
495 -89
510 -90
525 -90
540 -90
555 -90
570 -90
585 -90
600 -90
615 -89
630 -89
645 -89
660 -89
675 -88
690 -89
705 -89
720 -90
735 -90
750 -90
765 -91
780 -91
795 -92
810 -91
825 -91
840 -91
855 -90
870 -90
885 -90
900 -89
915 -90
930 -89
945 -90
960 -90
975 -91
990 -91
1005 -91
1020 -90
1035 -90
1050 -90
1065 -90
1080 -90
1095 -90
1110 -89
1125 -89
1140 -90
1155 -91
1170 -91
1185 -91
1200 -91
1215 -91
1230 -91
1245 -92
1260 -92
1275 -91
1290 -90
1305 -90
1320 -90
1335 -90
1350 -90
1365 -90
1380 -90
1395 -91
1410 -91
1425 -91
1440 -92
1455 -92
1470 -92
1485 -92
1500 -92
1515 -91
1530 -91
1545 -90
1560 -90
1575 -89
1590 -90
1605 -90
1620 -90
1635 -90
1650 -91
1665 -91
1680 -91
1695 -91
1710 -91
1725 -91
1740 -91
1755 -91
1770 -91
1785 -91
1800 -92
1815 -92
1830 -93
1845 -92
1860 -93
1875 -93
1890 -94
1905 -95
1920 -96
1935 -96
1950 -96
1965 -96
1980 -97
1995 -95
2010 -96
2025 -95
2040 -95
2055 -94
2070 -93
2085 -93
2100 -93
2115 -93
2130 -94
2145 -95
2160 -95
2175 -95
2190 -94
2205 -95
2220 -95
2235 -95
2250 -95
2265 -95
2280 -93
2295 -92
2310 -92
2325 -92
2340 -92
2355 -92
2370 -91
2385 -91
2400 -91
2415 -91
2430 -90
2445 -90
2460 -90
2475 -90
2490 -89
2505 -89
2520 -89
2535 -89
2550 -88
2565 -88
2580 -88
2595 -87
2610 -87
2625 -87
2640 -87
2655 -87
2670 -87
2685 -88
2700 -88
2715 -88
2730 -88
2745 -88
2760 -88
2775 -88
2790 -87
2805 -87
2820 -87
2835 -86
2850 -86
2865 -87
2880 -87
2895 -87
2910 -87
2925 -86
2940 -86
2955 -86
2970 -87
2985 -86
3000 -90
100 Davids Drive, Hauppauge, NY 11788
TEL.: (631) 439-9220 • FAX: (631) 436-7430
e-mail: components@miteq.com • www.miteq.com
AM-1594 051507
OPTIONS FOR BIPOLAR AMPLIFIERS
INPUT BIAS TEE
Add Suffix “-F”
Used to inject bias signal to photo diode or other type
of device. Check for availability on your model before
ordering. Available on most units operating above 1
MHz. Please contact MITEQ with your custom
requirements.
BIAS THROUGH THE OUTPUT CONNECTOR
Add Suffix “-1306/E” or “-1306/D”
Used to supply operating power when the amplifier
is remotely located while eliminating the need to run
a separate DC line. Specify whether existing power
pin should be “Enabled” or “Disabled.” To order, add
-1306/E or -1306/D after model number. Example:
AU-2A-0150-1306/E will have existing +15 V pin
enabled so that it can be used as a test point. Use
caution with this option since any voltage applied here
will also be present on the RF output center pin.
Available on most units operating above 1 MHz.
BIAS THROUGH THE OUTPUT CONNECTOR
WITH DC FEEDTHROUGH TO RF INPUT
Add Suffix “-1334/E” or “-1334/D”
Used to supply operating power when the amplifier is
remotely located and eliminates the need to run a
separate DC line. This DC voltage is then internally
fed to the RF input to power a remote LNA or other
low power equipment. Maximum current of external
load will vary with model type. Available on most units
operating above 1 MHz. Please contact factory prior
to ordering.
Specify whether existing power pin should be
“Enabled” or “Disabled”. To order, add “-1334/E” or “-1334/D”
after model number. Example: AU-2A-0150-1334/E
will have existing +15 V pin enabled so that it can be
used as a test point. Use caution with this option since
any voltage applied here will also be present on both
the RF output and input center pins.
TYPE N OR BNC CONNECTORS
Add Suffix “-N” or “-BNC”
Type N-female and type BNC-female are available for
all outlines 1 through 5, 12, 13 and 15 amplifiers. Add
connector type after model number. Examples: AU-2A-
0150-N; AU-2A-0150-BNC. Type N-male and mixed
connector types are also available on request. Please
call MITEQ with your specific requirements.
INPUT INTERNAL LIMITER
Add Suffix “-1103”
Available on models up to 500 MHz. Will protect the
input stage from CW signals as high as +30 dBm. To
order, add “-1103” after model number. Example:
AU-2A-0150-1103. Options are available for protec-
tion against short duration pulses up to 50 W.
AC POWER SUPPLY (100 to 240 VAC,
47 – 440 Hz). Add Suffix “-1179”
Available as an add-on to most models using outlines
1 through 5 and 15. Includes 6-foot line cord with
standard US line plug, internal fuse, on/off switch and
LED indicator light. Amplifier is permanently mounted
to power supply. To order, add “-1179” after model
number. Example: AU-2A-0150-1179. Refer to outline
12 for dimensions.
AC POWER SUPPLY (Wall plug-in unit)
Part Number “205531-19”
A low cost alternate to option “-1179”, the wall plug-in
unit is a small switching power supply capable of
delivering 1 amp at 15 volts.
AC POWER SUPPLY WITH SMC
CONNECTORS (Wall plug-in unit)
Part Number “-1179SC”
Same as above except has mating SMC connectors
on amplifier DC input and power supply DC output.
Available for outlines 1 through 10, 13 and 15.
ADDITIONAL OPTIONS AVAILABLE
OPTION SUFFIX
Gain Window -GW
Phase Match -PM
Amplitude Match -AM
Gain Control -GC
RF
INPUT
RF
OUTPUT
+V POWER
SUPPLY
BIAS
INPUT
100 Davids Drive, Hauppauge, NY 11788
TEL.: (631) 439-9220 • FAX: (631) 436-7430
e-mail: components@miteq.com • www.miteq.com
AM-1594 051507
PRICING AND TERMS
A quotation on any item in the catalog is available by contacting the factory. All
quotations, unless otherwise noted, are valid for 60 days from the date of issue,
F.O.B. (FCA) Hauppauge, NY 11788. Pricing does not include customer or gov-
ernment source inspection unless otherwise noted. On international orders, an
irrevocable letter of credit may be required. MITEQ accepts these credit cards:
QUANTITY DISCOUNTS
A quantity discount is generally available on most catalog items. Due to the
wide variety of devices in the catalog, it is not possible to provide a standard discount schedule. When quantities are involved,
please contact the factory and the appropriate information will be provided.
SOURCE INSPECTION
Government / customer source inspection is available on any item upon receipt of the complete written confirmation of purchase
order items, including the prime government contract number. Source inspection with respect to some products increases the
unit price and extends delivery because of duplicate standard final inspection and testing. It is recommended wherever possi-
ble that a Certificate of Compliance be substituted for source inspection to minimize price and delivery delays.
SHIPPING INFORMATION
Unless instructed otherwise by the customer, we will ship UPS in the U.S. F.O.B. (FCA) Hauppauge. Air freight will be used as
the primary international means of shipment. Please indicate at time of purchase what method of shipment you require.
RETURNED MATERIAL
When returning material for repair or replacement, please ensure that there is complete information included with the shipment,
giving a detailed description of the reason for its return, the date and purchase order on which it was obtained, and the exact
address to which the material is to be reshipped. All returns must arrive freight, postage, duties and handling prepaid.
REPAIR COSTS
Warranty repairs will be made at no cost to the customer. Units out of warranty, or those which have been mishandled, will
require approval by the customer for the charges involved before the repairs can be accomplished. We will provide an estimate
for the cost of the repair, which can be applied to the repair, if approval is granted. For those items that are deemed beyond
repair, or where the customer may decide not to repair the unit, an evaluation fee and handling charge will be applicable.
APPLICATION ENGINEERING
We maintain a large support staff of engineers who are experts in specific areas of microwave technology. Each has an engi-
neering background that combines both a formal engineering education with training and experience in product design. As
further technical support, we make available the services of our engineering and scientific staff, who may be consulted on
more advanced circuit designs or application problems.
DRAWINGS AND SPECIFICATIONS
The material presented in this catalog was current at the time of publication. MITEQ Inc.’s continuing product improvement pro-
gram makes it necessary to reserve the right to change our mechanical and electrical specifications without notice. If either of
these parameters is critical, please contact the factory to verify that the information is current.
GENERAL INFORMATION
ADDITIONAL INFORMATION
Welcome
Cards
®
MasterCard
®
®
®
MITEQ FEDERAL SUPPLY CODE
Our Federal Supply Code is: 33592
WARRANTY ISO 9001:2000 Certified
