A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components www.standexmeder.com Series Datasheet - DIL Reed Relays DIL Series Reed Relays Features Compatible with 14 pin DIL socket, High resistance coil up to 11 kOhm available Available with Dielectric Strength 4.25kVDC, Diode, Magnetic Shield & Others Markets: General purposes, Telecommunications, Test and Measurement & Others DIL 00-0X00-00X Part Description: Nominal Voltage Contact QTY Contact Form Switch Model Pin Out 05, 12, 24 1, 2, 4 A, C 66, 75, 88, 90 13, 15, 21, 51, 62, 63 Option () Version with Magnetic Shield L(M), D(Q), E(R), F(S) Customer Options Contact Data 66 75 88 90 Rated Power (max.) 10 10 50 10 W 200 500 500 175 V 0.5 0.5 2 0.5 A 1.0 1.0 2 1.0 A 150 200 80 150 mOhm 0.225 1.5 1.5 0.2 kVDC 0.5 0.5 1.2 0.7 ms 0.1 0.1 1.0 1.5 ms 1010 1010 1011 109 GOhm 0.2 0.4 0.3 1.0 pF Switch Model Any DC combination of V&A not to exceed their individual max.'s Switching Voltage (max.) DC or peak AC Switching Current (max.) DC or peak AC Carry Current (max.) DC or peak AC Contact Resistance (max.) @ 0.5V & 50mA Breakdown Voltage (min.) According to EN60255-5 Operating Time (max.) Incl. Bounce; Measured with w/ Nominal Voltage Release Time (max.) Measured with no Coil Excitation Insulation Resistance (typ.) Rh<45%, 100V Test Voltage Capacitance (typ.) @ 10kHz across open Switch USA: Europe: Asia: +1.866.782.6339 +49.7731.8399.0 +86.21.37820625 salesusa@standexmeder.com info@standexmeder.com salesasia@standexmeder.com Modifications in the sense of technical progress are reserved. Unit Version 01 27.01.2015 A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components www.standexmeder.com Series Datasheet - DIL Reed Relays Coil Data Contact Form Switch Model Coil Voltage (nom.) Coil Resistance (typ.) Pull-In Voltage (max.) Drop-Out Voltage (min.) Nominal Coil Power (typ.) VDC 05 12 24 05 12 24 05 12 24 05 12 24 05 12 24 Ohm 450 1,800 4,500 200 680 2,000 140 400 1,900 200 1,000 3,000 150 680 2,000 VDC 3.5 8.4 16.8 3.5 8.4 16.8 3.5 8.4 16.8 3.5 8.4 16.8 3.5 8.4 16.8 VDC 0.75 1.8 3.6 0.75 1.8 3.6 0.75 1.8 3.6 0.75 1.8 3.6 0.75 1.8 3.6 mW 55 80 130 125 210 290 179 360 303 125 145 190 165 210 290 Unit 1A 66, 72, 75, 88 2A 66, 72, 75, 88 4A 66 1C 90 2C 90 The Pull-In / Drop-Out Voltage and Coil Resistance will change at Rate of 0.4% per C Environmental Data Unit Shock Resistance (max.) 50 g 20 g Operating Temperature -20 to 70 C Storage Temperature Soldering Temperature (max.) -25 to 85 C 260 C 1/2 sine wave duration 11ms Vibration Resistance (max.) 5 sec. max. DIL Reed Relay Handling & Assembly Instructions Switching inductive and/or capacitive loads create voltage and/or current peaks, which may damage the relay. Protective circuits need to be used. Life Test Data *Load increase reduces life expectancy of Reed Switches External magnetic fields needs to be taken into consideration, including a too high packing density. This may influence the relays' electrical characteristics. Mechanical shock impacts e.g. dropping the relays may cause immediate or post-installation failure. Wave soldering: maximum 260/5 seconds. Reflow soldering: Recommendations given by the soldering paste manufacturer need to be considered as well as the temperature limits of other components/processes. USA: Europe: Asia: +1.866.782.6339 +49.7731.8399.0 +86.21.37820625 salesusa@standexmeder.com info@standexmeder.com salesasia@standexmeder.com Modifications in the sense of technical progress are reserved. Version 01 27.01.2015 A Global Leader in the Design, Development, and Manufacture of Sensor and Magnetic Components www.standexmeder.com Series Datasheet - DIL Reed Relays Glossary Contact Form Form A NO = Normally Open Contacts SPST = Single Pole Single Throw Form B NC = Normally Closed Contacts SPST = Single Pole Single Throw Form C Changeover SPDT = Single Pole Double Throw Pin Out Top View 2.54mm [0.10"] pitch grid Options Top View 2.54mm [0.10"] pitch grid Please Note: Any option can affect the coil resistance, the breakdown voltage or other electronical data. Please contact us. Special performance: The following special options are available on request: Other pinning layout Other coil resistance values Other switches available USA: Europe: Asia: +1.866.782.6339 +49.7731.8399.0 +86.21.37820625 salesusa@standexmeder.com info@standexmeder.com salesasia@standexmeder.com Modifications in the sense of technical progress are reserved. Version 01 27.01.2015